- 根目录:
- arch
- arm
- mach-bcmring
- include
- mach
- csp
- chipcHw_inline.h
/*****************************************************************************
* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved.
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2, available at
* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a
* license other than the GPL, without Broadcom's express prior written
* consent.
*****************************************************************************/
#ifndef CHIPC_INLINE_H
#define CHIPC_INLINE_H
/* ---- Include Files ----------------------------------------------------- */
#include <csp/errno.h>
#include <csp/reg.h>
#include <mach/csp/chipcHw_reg.h>
#include <mach/csp/chipcHw_def.h>
/* ---- Private Constants and Types --------------------------------------- */
typedef enum {
chipcHw_OPTYPE_BYPASS, /* Bypass operation */
chipcHw_OPTYPE_OUTPUT /* Output operation */
} chipcHw_OPTYPE_e;
/* ---- Public Constants and Types ---------------------------------------- */
/* ---- Public Variable Externs ------------------------------------------- */
/* ---- Public Function Prototypes ---------------------------------------- */
/* ---- Private Function Prototypes --------------------------------------- */
static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
chipcHw_OPTYPE_e type, int mode);
/****************************************************************************/
/**
* @brief Get Numeric Chip ID
*
* This function returns Chip ID that includes the revison number
*
* @return Complete numeric Chip ID
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getChipId(void)
{
return pChipcHw->ChipId;
}
/****************************************************************************/
/**
* @brief Enable Spread Spectrum
*
* @note chipcHw_Init() must be called earlier
*/
/****************************************************************************/
static inline void chipcHw_enableSpreadSpectrum(void)
{
if ((pChipcHw->
PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) !=
chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
ddrcReg_PHY_ADDR_CTL_REGP->ssCfg =
(0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) |
(ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK <<
ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT);
ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |=
ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
}
}
/****************************************************************************/
/**
* @brief Disable Spread Spectrum
*
*/
/****************************************************************************/
static inline void chipcHw_disableSpreadSpectrum(void)
{
ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE;
}
/****************************************************************************/
/**
* @brief Get Chip Product ID
*
* This function returns Chip Product ID
*
* @return Chip Product ID
*/
/****************************************************************************/
static inline uint32_t chipcHw_getChipProductId(void)
{
return (pChipcHw->
ChipId & chipcHw_REG_CHIPID_BASE_MASK) >>
chipcHw_REG_CHIPID_BASE_SHIFT;
}
/****************************************************************************/
/**
* @brief Get revision number
*
* This function returns revision number of the chip
*
* @return Revision number
*/
/****************************************************************************/
static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void)
{
return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK;
}
/****************************************************************************/
/**
* @brief Enables bus interface clock
*
* Enables bus interface clock of various device
*
* @return void
*
* @note use chipcHw_REG_BUS_CLOCK_XXXX for mask
*/
/****************************************************************************/
static inline void chipcHw_busInterfaceClockEnable(uint32_t mask)
{
reg32_modify_or(&pChipcHw->BusIntfClock, mask);
}
/****************************************************************************/
/**
* @brief Disables bus interface clock
*
* Disables bus interface clock of various device
*
* @return void
*
* @note use chipcHw_REG_BUS_CLOCK_XXXX
*/
/****************************************************************************/
static inline void chipcHw_busInterfaceClockDisable(uint32_t mask)
{
reg32_modify_and(&pChipcHw->BusIntfClock, ~mask);
}
/****************************************************************************/
/**
* @brief Get status (enabled/disabled) of bus interface clock
*
* This function returns the status of devices' bus interface clock
*
* @return Bus interface clock
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getBusInterfaceClockStatus(void)
{
return pChipcHw->BusIntfClock;
}
/****************************************************************************/
/**
* @brief Enables various audio channels
*
* Enables audio channel
*
* @return void
*
* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
*/
/****************************************************************************/
static inline void chipcHw_audioChannelEnable(uint32_t mask)
{
reg32_modify_or(&pChipcHw->AudioEnable, mask);
}
/****************************************************************************/
/**
* @brief Disables various audio channels
*
* Disables audio channel
*
* @return void
*
* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX
*/
/****************************************************************************/
static inline void chipcHw_audioChannelDisable(uint32_t mask)
{
reg32_modify_and(&pChipcHw->AudioEnable, ~mask);
}
/****************************************************************************/
/**
* @brief Soft resets devices
*
* Soft resets various devices
*
* @return void
*
* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines
*/
/****************************************************************************/
static inline void chipcHw_softReset(uint64_t mask)
{
chipcHw_softResetEnable(mask);
chipcHw_softResetDisable(mask);
}
static inline void chipcHw_softResetDisable(uint64_t mask)
{
uint32_t ctrl1 = (uint32_t) mask;
uint32_t ctrl2 = (uint32_t) (mask >> 32);
/* Deassert module soft reset */
REG_LOCAL_IRQ_SAVE;
pChipcHw->SoftReset1 ^= ctrl1;
pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
REG_LOCAL_IRQ_RESTORE;
}
static inline void chipcHw_softResetEnable(uint64_t mask)
{
uint32_t ctrl1 = (uint32_t) mask;
uint32_t ctrl2 = (uint32_t) (mask >> 32);
uint32_t unhold = 0;
REG_LOCAL_IRQ_SAVE;
pChipcHw->SoftReset1 |= ctrl1;
/* Mask out unhold request bits */
pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK));
/* Process unhold requests */
if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) {
unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD;
}
if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) {
unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD;
}
if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) {
unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD;
}
if (unhold) {
/* Make sure unhold request is effective */
pChipcHw->SoftReset1 &= ~unhold;
}
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Configures misc CHIP functionality
*
* Configures CHIP functionality
*
* @return void
*
* @note use chipcHw_REG_MISC_CTRL_XXXXXX
*/
/****************************************************************************/
static inline void chipcHw_miscControl(uint32_t mask)
{
reg32_write(&pChipcHw->MiscCtrl, mask);
}
static inline void chipcHw_miscControlDisable(uint32_t mask)
{
reg32_modify_and(&pChipcHw->MiscCtrl, ~mask);
}
static inline void chipcHw_miscControlEnable(uint32_t mask)
{
reg32_modify_or(&pChipcHw->MiscCtrl, mask);
}
/****************************************************************************/
/**
* @brief Set OTP options
*
* Set OTP options
*
* @return void
*
* @note use chipcHw_REG_OTP_XXXXXX
*/
/****************************************************************************/
static inline void chipcHw_setOTPOption(uint64_t mask)
{
uint32_t ctrl1 = (uint32_t) mask;
uint32_t ctrl2 = (uint32_t) (mask >> 32);
reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1);
reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2);
}
/****************************************************************************/
/**
* @brief Get sticky bits
*
* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getStickyBits(void)
{
return pChipcHw->Sticky;
}
/****************************************************************************/
/**
* @brief Set sticky bits
*
* @return void
*
* @note use chipcHw_REG_STICKY_XXXXXX
*/
/****************************************************************************/
static inline void chipcHw_setStickyBits(uint32_t mask)
{
uint32_t bits = 0;
REG_LOCAL_IRQ_SAVE;
if (mask & chipcHw_REG_STICKY_POR_BROM) {
bits |= chipcHw_REG_STICKY_POR_BROM;
} else {
uint32_t sticky;
sticky = pChipcHw->Sticky;
if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
&& (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) {
bits |= chipcHw_REG_STICKY_BOOT_DONE;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_1)
&& (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) {
bits |= chipcHw_REG_STICKY_GENERAL_1;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_2)
&& (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) {
bits |= chipcHw_REG_STICKY_GENERAL_2;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_3)
&& (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) {
bits |= chipcHw_REG_STICKY_GENERAL_3;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_4)
&& (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) {
bits |= chipcHw_REG_STICKY_GENERAL_4;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_5)
&& (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) {
bits |= chipcHw_REG_STICKY_GENERAL_5;
}
}
pChipcHw->Sticky = bits;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Clear sticky bits
*
* @return void
*
* @note use chipcHw_REG_STICKY_XXXXXX
*/
/****************************************************************************/
static inline void chipcHw_clearStickyBits(uint32_t mask)
{
uint32_t bits = 0;
REG_LOCAL_IRQ_SAVE;
if (mask &
(chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 |
chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 |
chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) {
uint32_t sticky = pChipcHw->Sticky;
if ((mask & chipcHw_REG_STICKY_BOOT_DONE)
&& (sticky & chipcHw_REG_STICKY_BOOT_DONE)) {
bits = chipcHw_REG_STICKY_BOOT_DONE;
mask &= ~chipcHw_REG_STICKY_BOOT_DONE;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_1)
&& (sticky & chipcHw_REG_STICKY_GENERAL_1)) {
bits |= chipcHw_REG_STICKY_GENERAL_1;
mask &= ~chipcHw_REG_STICKY_GENERAL_1;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_2)
&& (sticky & chipcHw_REG_STICKY_GENERAL_2)) {
bits |= chipcHw_REG_STICKY_GENERAL_2;
mask &= ~chipcHw_REG_STICKY_GENERAL_2;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_3)
&& (sticky & chipcHw_REG_STICKY_GENERAL_3)) {
bits |= chipcHw_REG_STICKY_GENERAL_3;
mask &= ~chipcHw_REG_STICKY_GENERAL_3;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_4)
&& (sticky & chipcHw_REG_STICKY_GENERAL_4)) {
bits |= chipcHw_REG_STICKY_GENERAL_4;
mask &= ~chipcHw_REG_STICKY_GENERAL_4;
}
if ((mask & chipcHw_REG_STICKY_GENERAL_5)
&& (sticky & chipcHw_REG_STICKY_GENERAL_5)) {
bits |= chipcHw_REG_STICKY_GENERAL_5;
mask &= ~chipcHw_REG_STICKY_GENERAL_5;
}
}
pChipcHw->Sticky = bits | mask;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Get software strap value
*
* Retrieves software strap value
*
* @return Software strap value
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getSoftStraps(void)
{
return pChipcHw->SoftStraps;
}
/****************************************************************************/
/**
* @brief Set software override strap options
*
* set software override strap options
*
* @return nothing
*
*/
/****************************************************************************/
static inline void chipcHw_setSoftStraps(uint32_t strapOptions)
{
reg32_write(&pChipcHw->SoftStraps, strapOptions);
}
/****************************************************************************/
/**
* @brief Get Pin Strap Options
*
* This function returns the raw boot strap options
*
* @return strap options
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getPinStraps(void)
{
return pChipcHw->PinStraps;
}
/****************************************************************************/
/**
* @brief Get Valid Strap Options
*
* This function returns the valid raw boot strap options
*
* @return strap options
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getValidStraps(void)
{
uint32_t softStraps;
/*
** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps
** which copies HW straps to soft straps if there is no override
*/
softStraps = chipcHw_getSoftStraps();
return softStraps;
}
/****************************************************************************/
/**
* @brief Initialize valid pin strap options
*
* Retrieves valid pin strap options by copying HW strap options to soft register
* (if chipcHw_STRAPS_SOFT_OVERRIDE not set)
*
* @return nothing
*
*/
/****************************************************************************/
static inline void chipcHw_initValidStraps(void)
{
uint32_t softStraps;
REG_LOCAL_IRQ_SAVE;
softStraps = chipcHw_getSoftStraps();
if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) {
/* Copy HW straps to software straps */
chipcHw_setSoftStraps(chipcHw_getPinStraps());
}
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Get boot device
*
* This function returns the device type used in booting the system
*
* @return Boot device of type chipcHw_BOOT_DEVICE
*
*/
/****************************************************************************/
static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void)
{
return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK;
}
/****************************************************************************/
/**
* @brief Get boot mode
*
* This function returns the way the system was booted
*
* @return Boot mode of type chipcHw_BOOT_MODE
*
*/
/****************************************************************************/
static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void)
{
return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK;
}
/****************************************************************************/
/**
* @brief Get NAND flash page size
*
* This function returns the NAND device page size
*
* @return Boot NAND device page size
*
*/
/****************************************************************************/
static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void)
{
return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK;
}
/****************************************************************************/
/**
* @brief Get NAND flash address cycle configuration
*
* This function returns the NAND flash address cycle configuration
*
* @return 0 = Do not extra address cycle, 1 = Add extra cycle
*
*/
/****************************************************************************/
static inline int chipcHw_getNandExtraCycle(void)
{
if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) {
return 1;
} else {
return 0;
}
}
/****************************************************************************/
/**
* @brief Activates PIF interface
*
* This function activates PIF interface by taking control of LCD pins
*
* @note
* When activated, LCD pins will be defined as follows for PIF operation
*
* CLD[17:0] = pif_data[17:0]
* CLD[23:18] = pif_address[5:0]
* CLPOWER = pif_wr_str
* CLCP = pif_rd_str
* CLAC = pif_hat1
* CLFP = pif_hrdy1
* CLLP = pif_hat2
* GPIO[42] = pif_hrdy2
*
* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin
*
*/
/****************************************************************************/
static inline void chipcHw_activatePifInterface(void)
{
reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE);
}
/****************************************************************************/
/**
* @brief Activates LCD interface
*
* This function activates LCD interface
*
* @note
* When activated, LCD pins will be defined as follows
*
* CLD[17:0] = LCD data
* CLD[23:18] = LCD data
* CLPOWER = LCD power
* CLCP =
* CLAC = LCD ack
* CLFP =
* CLLP =
*/
/****************************************************************************/
static inline void chipcHw_activateLcdInterface(void)
{
reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE);
}
/****************************************************************************/
/**
* @brief Deactivates PIF/LCD interface
*
* This function deactivates PIF/LCD interface
*
* @note
* When deactivated LCD pins will be in rti-stated
*
*/
/****************************************************************************/
static inline void chipcHw_deactivatePifLcdInterface(void)
{
reg32_write(&pChipcHw->LcdPifMode, 0);
}
/****************************************************************************/
/**
* @brief Select GE2
*
* This function select GE2 as the graphic engine
*
*/
/****************************************************************************/
static inline void chipcHw_selectGE2(void)
{
reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL);
}
/****************************************************************************/
/**
* @brief Select GE3
*
* This function select GE3 as the graphic engine
*
*/
/****************************************************************************/
static inline void chipcHw_selectGE3(void)
{
reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL);
}
/****************************************************************************/
/**
* @brief Get to know the configuration of GPIO pin
*
*/
/****************************************************************************/
static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin)
{
return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &
(chipcHw_REG_GPIO_MUX_MASK <<
chipcHw_REG_GPIO_MUX_POSITION(pin))) >>
chipcHw_REG_GPIO_MUX_POSITION(pin);
}
/****************************************************************************/
/**
* @brief Configure GPIO pin function
*
*/
/****************************************************************************/
static inline void chipcHw_setGpioPinFunction(int pin,
chipcHw_GPIO_FUNCTION_e func)
{
REG_LOCAL_IRQ_SAVE;
*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &=
~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin));
*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |=
func << chipcHw_REG_GPIO_MUX_POSITION(pin);
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Set Pin slew rate
*
* This function sets the slew of individual pin
*
*/
/****************************************************************************/
static inline void chipcHw_setPinSlewRate(uint32_t pin,
chipcHw_PIN_SLEW_RATE_e slewRate)
{
REG_LOCAL_IRQ_SAVE;
*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &=
~(chipcHw_REG_SLEW_RATE_MASK <<
chipcHw_REG_SLEW_RATE_POSITION(pin));
*((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |=
(uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin);
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Set Pin output drive current
*
* This function sets output drive current of individual pin
*
* Note: Avoid the use of the word 'current' since linux headers define this
* to be the current task.
*/
/****************************************************************************/
static inline void chipcHw_setPinOutputCurrent(uint32_t pin,
chipcHw_PIN_CURRENT_STRENGTH_e
curr)
{
REG_LOCAL_IRQ_SAVE;
*((uint32_t *) chipcHw_REG_CURRENT(pin)) &=
~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin));
*((uint32_t *) chipcHw_REG_CURRENT(pin)) |=
(uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin);
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Set Pin pullup register
*
* This function sets pullup register of individual pin
*
*/
/****************************************************************************/
static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup)
{
REG_LOCAL_IRQ_SAVE;
*((uint32_t *) chipcHw_REG_PULLUP(pin)) &=
~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin));
*((uint32_t *) chipcHw_REG_PULLUP(pin)) |=
(uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin);
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Set Pin input type
*
* This function sets input type of individual pin
*
*/
/****************************************************************************/
static inline void chipcHw_setPinInputType(uint32_t pin,
chipcHw_PIN_INPUTTYPE_e inputType)
{
REG_LOCAL_IRQ_SAVE;
*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &=
~(chipcHw_REG_INPUTTYPE_MASK <<
chipcHw_REG_INPUTTYPE_POSITION(pin));
*((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |=
(uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin);
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Power up the USB PHY
*
* This function powers up the USB PHY
*
*/
/****************************************************************************/
static inline void chipcHw_powerUpUsbPhy(void)
{
reg32_modify_and(&pChipcHw->MiscCtrl,
chipcHw_REG_MISC_CTRL_USB_POWERON);
}
/****************************************************************************/
/**
* @brief Power down the USB PHY
*
* This function powers down the USB PHY
*
*/
/****************************************************************************/
static inline void chipcHw_powerDownUsbPhy(void)
{
reg32_modify_or(&pChipcHw->MiscCtrl,
chipcHw_REG_MISC_CTRL_USB_POWEROFF);
}
/****************************************************************************/
/**
* @brief Set the 2nd USB as host
*
* This function sets the 2nd USB as host
*
*/
/****************************************************************************/
static inline void chipcHw_setUsbHost(void)
{
reg32_modify_or(&pChipcHw->MiscCtrl,
chipcHw_REG_MISC_CTRL_USB_MODE_HOST);
}
/****************************************************************************/
/**
* @brief Set the 2nd USB as device
*
* This function sets the 2nd USB as device
*
*/
/****************************************************************************/
static inline void chipcHw_setUsbDevice(void)
{
reg32_modify_and(&pChipcHw->MiscCtrl,
chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE);
}
/****************************************************************************/
/**
* @brief Lower layer function to enable/disable a clock of a certain device
*
* This function enables/disables a core clock
*
*/
/****************************************************************************/
static inline void chipcHw_setClock(chipcHw_CLOCK_e clock,
chipcHw_OPTYPE_e type, int mode)
{
volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
switch (clock) {
case chipcHw_CLOCK_DDR:
pPLLReg = &pChipcHw->DDRClock;
break;
case chipcHw_CLOCK_ARM:
pPLLReg = &pChipcHw->ARMClock;
break;
case chipcHw_CLOCK_ESW:
pPLLReg = &pChipcHw->ESWClock;
break;
case chipcHw_CLOCK_VPM:
pPLLReg = &pChipcHw->VPMClock;
break;
case chipcHw_CLOCK_ESW125:
pPLLReg = &pChipcHw->ESW125Clock;
break;
case chipcHw_CLOCK_UART:
pPLLReg = &pChipcHw->UARTClock;
break;
case chipcHw_CLOCK_SDIO0:
pPLLReg = &pChipcHw->SDIO0Clock;
break;
case chipcHw_CLOCK_SDIO1:
pPLLReg = &pChipcHw->SDIO1Clock;
break;
case chipcHw_CLOCK_SPI:
pPLLReg = &pChipcHw->SPIClock;
break;
case chipcHw_CLOCK_ETM:
pPLLReg = &pChipcHw->ETMClock;
break;
case chipcHw_CLOCK_USB:
pPLLReg = &pChipcHw->USBClock;
if (type == chipcHw_OPTYPE_OUTPUT) {
if (mode) {
reg32_modify_and(pPLLReg,
~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
} else {
reg32_modify_or(pPLLReg,
chipcHw_REG_PLL_CLOCK_POWER_DOWN);
}
}
break;
case chipcHw_CLOCK_LCD:
pPLLReg = &pChipcHw->LCDClock;
if (type == chipcHw_OPTYPE_OUTPUT) {
if (mode) {
reg32_modify_and(pPLLReg,
~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
} else {
reg32_modify_or(pPLLReg,
chipcHw_REG_PLL_CLOCK_POWER_DOWN);
}
}
break;
case chipcHw_CLOCK_APM:
pPLLReg = &pChipcHw->APMClock;
if (type == chipcHw_OPTYPE_OUTPUT) {
if (mode) {
reg32_modify_and(pPLLReg,
~chipcHw_REG_PLL_CLOCK_POWER_DOWN);
} else {
reg32_modify_or(pPLLReg,
chipcHw_REG_PLL_CLOCK_POWER_DOWN);
}
}
break;
case chipcHw_CLOCK_BUS:
pClockCtrl = &pChipcHw->ACLKClock;
break;
case chipcHw_CLOCK_OTP:
pClockCtrl = &pChipcHw->OTPClock;
break;
case chipcHw_CLOCK_I2C:
pClockCtrl = &pChipcHw->I2CClock;
break;
case chipcHw_CLOCK_I2S0:
pClockCtrl = &pChipcHw->I2S0Clock;
break;
case chipcHw_CLOCK_RTBUS:
pClockCtrl = &pChipcHw->RTBUSClock;
break;
case chipcHw_CLOCK_APM100:
pClockCtrl = &pChipcHw->APM100Clock;
break;
case chipcHw_CLOCK_TSC:
pClockCtrl = &pChipcHw->TSCClock;
break;
case chipcHw_CLOCK_LED:
pClockCtrl = &pChipcHw->LEDClock;
break;
case chipcHw_CLOCK_I2S1:
pClockCtrl = &pChipcHw->I2S1Clock;
break;
}
if (pPLLReg) {
switch (type) {
case chipcHw_OPTYPE_OUTPUT:
/* PLL clock output enable/disable */
if (mode) {
if (clock == chipcHw_CLOCK_DDR) {
/* DDR clock enable is inverted */
reg32_modify_and(pPLLReg,
~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
} else {
reg32_modify_or(pPLLReg,
chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
}
} else {
if (clock == chipcHw_CLOCK_DDR) {
/* DDR clock disable is inverted */
reg32_modify_or(pPLLReg,
chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
} else {
reg32_modify_and(pPLLReg,
~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE);
}
}
break;
case chipcHw_OPTYPE_BYPASS:
/* PLL clock bypass enable/disable */
if (mode) {
reg32_modify_or(pPLLReg,
chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
} else {
reg32_modify_and(pPLLReg,
~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
}
break;
}
} else if (pClockCtrl) {
switch (type) {
case chipcHw_OPTYPE_OUTPUT:
if (mode) {
reg32_modify_or(pClockCtrl,
chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
} else {
reg32_modify_and(pClockCtrl,
~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE);
}
break;
case chipcHw_OPTYPE_BYPASS:
if (mode) {
reg32_modify_or(pClockCtrl,
chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
} else {
reg32_modify_and(pClockCtrl,
~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
}
break;
}
}
}
/****************************************************************************/
/**
* @brief Disables a core clock of a certain device
*
* This function disables a core clock
*
* @note no change in power consumption
*/
/****************************************************************************/
static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock)
{
/* Disable output of the clock */
chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0);
}
/****************************************************************************/
/**
* @brief Enable a core clock of a certain device
*
* This function enables a core clock
*
* @note no change in power consumption
*/
/****************************************************************************/
static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock)
{
/* Enable output of the clock */
chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1);
}
/****************************************************************************/
/**
* @brief Enables bypass clock of a certain device
*
* This function enables bypass clock
*
* @note Doesnot affect the bus interface clock
*/
/****************************************************************************/
static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock)
{
/* Enable bypass clock */
chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1);
}
/****************************************************************************/
/**
* @brief Disabled bypass clock of a certain device
*
* This function disables bypass clock
*
* @note Doesnot affect the bus interface clock
*/
/****************************************************************************/
static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock)
{
/* Disable bypass clock */
chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0);
}
/****************************************************************************/
/** @brief Checks if software strap is enabled
*
* @return 1 : When enable
* 0 : When disable
*/
/****************************************************************************/
static inline int chipcHw_isSoftwareStrapsEnable(void)
{
return pChipcHw->SoftStraps & 0x00000001;
}
/****************************************************************************/
/** @brief Enable software strap
*/
/****************************************************************************/
static inline void chipcHw_softwareStrapsEnable(void)
{
reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001);
}
/****************************************************************************/
/** @brief Disable software strap
*/
/****************************************************************************/
static inline void chipcHw_softwareStrapsDisable(void)
{
reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001));
}
/****************************************************************************/
/** @brief PLL test enable
*/
/****************************************************************************/
static inline void chipcHw_pllTestEnable(void)
{
reg32_modify_or(&pChipcHw->PLLConfig,
chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
}
/****************************************************************************/
/** @brief PLL2 test enable
*/
/****************************************************************************/
static inline void chipcHw_pll2TestEnable(void)
{
reg32_modify_or(&pChipcHw->PLLConfig2,
chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
}
/****************************************************************************/
/** @brief PLL test disable
*/
/****************************************************************************/
static inline void chipcHw_pllTestDisable(void)
{
reg32_modify_and(&pChipcHw->PLLConfig,
~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
}
/****************************************************************************/
/** @brief PLL2 test disable
*/
/****************************************************************************/
static inline void chipcHw_pll2TestDisable(void)
{
reg32_modify_and(&pChipcHw->PLLConfig2,
~chipcHw_REG_PLL_CONFIG_TEST_ENABLE);
}
/****************************************************************************/
/** @brief Get PLL test status
*/
/****************************************************************************/
static inline int chipcHw_isPllTestEnable(void)
{
return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
}
/****************************************************************************/
/** @brief Get PLL2 test status
*/
/****************************************************************************/
static inline int chipcHw_isPll2TestEnable(void)
{
return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE;
}
/****************************************************************************/
/** @brief PLL test select
*/
/****************************************************************************/
static inline void chipcHw_pllTestSelect(uint32_t val)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
pChipcHw->PLLConfig |=
(val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/** @brief PLL2 test select
*/
/****************************************************************************/
static inline void chipcHw_pll2TestSelect(uint32_t val)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK;
pChipcHw->PLLConfig2 |=
(val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/** @brief Get PLL test selected option
*/
/****************************************************************************/
static inline uint8_t chipcHw_getPllTestSelected(void)
{
return (uint8_t) ((pChipcHw->
PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
>> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
}
/****************************************************************************/
/** @brief Get PLL2 test selected option
*/
/****************************************************************************/
static inline uint8_t chipcHw_getPll2TestSelected(void)
{
return (uint8_t) ((pChipcHw->
PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK)
>> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT);
}
/****************************************************************************/
/**
* @brief Disable the PLL1
*
*/
/****************************************************************************/
static inline void chipcHw_pll1Disable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Disable the PLL2
*
*/
/****************************************************************************/
static inline void chipcHw_pll2Disable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Enables DDR SW phase alignment interrupt
*/
/****************************************************************************/
static inline void chipcHw_ddrPhaseAlignInterruptEnable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Disables DDR SW phase alignment interrupt
*/
/****************************************************************************/
static inline void chipcHw_ddrPhaseAlignInterruptDisable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Set VPM SW phase alignment interrupt mode
*
* This function sets VPM phase alignment interrupt
*/
/****************************************************************************/
static inline void
chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode)
{
REG_LOCAL_IRQ_SAVE;
if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) {
pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
} else {
pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE;
}
pChipcHw->VPMPhaseCtrl2 =
(pChipcHw->
VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK <<
chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Enable DDR phase alignment in software
*
*/
/****************************************************************************/
static inline void chipcHw_ddrSwPhaseAlignEnable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Disable DDR phase alignment in software
*
*/
/****************************************************************************/
static inline void chipcHw_ddrSwPhaseAlignDisable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Enable DDR phase alignment in hardware
*
*/
/****************************************************************************/
static inline void chipcHw_ddrHwPhaseAlignEnable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Disable DDR phase alignment in hardware
*
*/
/****************************************************************************/
static inline void chipcHw_ddrHwPhaseAlignDisable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Enable VPM phase alignment in software
*
*/
/****************************************************************************/
static inline void chipcHw_vpmSwPhaseAlignEnable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Disable VPM phase alignment in software
*
*/
/****************************************************************************/
static inline void chipcHw_vpmSwPhaseAlignDisable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Enable VPM phase alignment in hardware
*
*/
/****************************************************************************/
static inline void chipcHw_vpmHwPhaseAlignEnable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Disable VPM phase alignment in hardware
*
*/
/****************************************************************************/
static inline void chipcHw_vpmHwPhaseAlignDisable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Set DDR phase alignment margin in hardware
*
*/
/****************************************************************************/
static inline void
chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin)
{
uint32_t ge = 0;
uint32_t le = 0;
switch (margin) {
case chipcHw_DDR_HW_PHASE_MARGIN_STRICT:
ge = 0x0F;
le = 0x0F;
break;
case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM:
ge = 0x03;
le = 0x3F;
break;
case chipcHw_DDR_HW_PHASE_MARGIN_WIDE:
ge = 0x01;
le = 0x7F;
break;
}
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->DDRPhaseCtrl1 &=
~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK <<
chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
|| (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK <<
chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
pChipcHw->DDRPhaseCtrl1 |=
((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT)
|| (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT));
REG_LOCAL_IRQ_RESTORE;
}
}
/****************************************************************************/
/**
* @brief Set VPM phase alignment margin in hardware
*
*/
/****************************************************************************/
static inline void
chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin)
{
uint32_t ge = 0;
uint32_t le = 0;
switch (margin) {
case chipcHw_VPM_HW_PHASE_MARGIN_STRICT:
ge = 0x0F;
le = 0x0F;
break;
case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM:
ge = 0x03;
le = 0x3F;
break;
case chipcHw_VPM_HW_PHASE_MARGIN_WIDE:
ge = 0x01;
le = 0x7F;
break;
}
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->VPMPhaseCtrl1 &=
~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK <<
chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
|| (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK <<
chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
pChipcHw->VPMPhaseCtrl1 |=
((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT)
|| (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT));
REG_LOCAL_IRQ_RESTORE;
}
}
/****************************************************************************/
/**
* @brief Checks DDR phase aligned status done by HW
*
* @return 1: When aligned
* 0: When not aligned
*/
/****************************************************************************/
static inline uint32_t chipcHw_isDdrHwPhaseAligned(void)
{
return (pChipcHw->
PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0;
}
/****************************************************************************/
/**
* @brief Checks VPM phase aligned status done by HW
*
* @return 1: When aligned
* 0: When not aligned
*/
/****************************************************************************/
static inline uint32_t chipcHw_isVpmHwPhaseAligned(void)
{
return (pChipcHw->
PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0;
}
/****************************************************************************/
/**
* @brief Get DDR phase aligned status done by HW
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void)
{
return (pChipcHw->
PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >>
chipcHw_REG_DDR_PHASE_STATUS_SHIFT;
}
/****************************************************************************/
/**
* @brief Get VPM phase aligned status done by HW
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void)
{
return (pChipcHw->
PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >>
chipcHw_REG_VPM_PHASE_STATUS_SHIFT;
}
/****************************************************************************/
/**
* @brief Get DDR phase control value
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getDdrPhaseControl(void)
{
return (pChipcHw->
PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >>
chipcHw_REG_DDR_PHASE_CTRL_SHIFT;
}
/****************************************************************************/
/**
* @brief Get VPM phase control value
*
*/
/****************************************************************************/
static inline uint32_t chipcHw_getVpmPhaseControl(void)
{
return (pChipcHw->
PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >>
chipcHw_REG_VPM_PHASE_CTRL_SHIFT;
}
/****************************************************************************/
/**
* @brief DDR phase alignment timeout count
*
* @note If HW fails to perform the phase alignment, it will trigger
* a DDR phase alignment timeout interrupt.
*/
/****************************************************************************/
static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->DDRPhaseCtrl2 &=
~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK <<
chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT);
pChipcHw->DDRPhaseCtrl2 |=
(busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) <<
chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief VPM phase alignment timeout count
*
* @note If HW fails to perform the phase alignment, it will trigger
* a VPM phase alignment timeout interrupt.
*/
/****************************************************************************/
static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->VPMPhaseCtrl2 &=
~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK <<
chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT);
pChipcHw->VPMPhaseCtrl2 |=
(busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) <<
chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Clear DDR phase alignment timeout interrupt
*
*/
/****************************************************************************/
static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void)
{
REG_LOCAL_IRQ_SAVE;
/* Clear timeout interrupt service bit */
pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED;
pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief Clear VPM phase alignment timeout interrupt
*
*/
/****************************************************************************/
static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void)
{
REG_LOCAL_IRQ_SAVE;
/* Clear timeout interrupt service bit */
pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED;
pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief DDR phase alignment timeout interrupt enable
*
*/
/****************************************************************************/
static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void)
{
REG_LOCAL_IRQ_SAVE;
chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
/* Enable timeout interrupt */
pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief VPM phase alignment timeout interrupt enable
*
*/
/****************************************************************************/
static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void)
{
REG_LOCAL_IRQ_SAVE;
chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(); /* Recommended */
/* Enable timeout interrupt */
pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief DDR phase alignment timeout interrupt disable
*
*/
/****************************************************************************/
static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
/****************************************************************************/
/**
* @brief VPM phase alignment timeout interrupt disable
*
*/
/****************************************************************************/
static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void)
{
REG_LOCAL_IRQ_SAVE;
pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE;
REG_LOCAL_IRQ_RESTORE;
}
#endif /* CHIPC_INLINE_H */