- 根目录:
- arch
- mips
- include
- asm
- asm.h
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995, 1996, 1997, 1999, 2001 by Ralf Baechle
* Copyright (C) 1999 by Silicon Graphics, Inc.
* Copyright (C) 2001 MIPS Technologies, Inc.
* Copyright (C) 2002 Maciej W. Rozycki
*
* Some useful macros for MIPS assembler code
*
* Some of the routines below contain useless nops that will be optimized
* away by gas in -O mode. These nops are however required to fill delay
* slots in noreorder mode.
*/
#ifndef __ASM_ASM_H
#define __ASM_ASM_H
#include <asm/sgidefs.h>
#ifndef CAT
#ifdef __STDC__
#define __CAT(str1, str2) str1##str2
#else
#define __CAT(str1, str2) str1/**/str2
#endif
#define CAT(str1, str2) __CAT(str1, str2)
#endif
/*
* PIC specific declarations
* Not used for the kernel but here seems to be the right place.
*/
#ifdef __PIC__
#define CPRESTORE(register) \
.cprestore register
#define CPADD(register) \
.cpadd register
#define CPLOAD(register) \
.cpload register
#else
#define CPRESTORE(register)
#define CPADD(register)
#define CPLOAD(register)
#endif
/*
* LEAF - declare leaf routine
*/
#define LEAF(symbol) \
.globl symbol; \
.align 2; \
.type symbol, @function; \
.ent symbol, 0; \
symbol: .frame sp, 0, ra
/*
* NESTED - declare nested routine entry point
*/
#define NESTED(symbol, framesize, rpc) \
.globl symbol; \
.align 2; \
.type symbol, @function; \
.ent symbol, 0; \
symbol: .frame sp, framesize, rpc
/*
* END - mark end of function
*/
#define END(function) \
.end function; \
.size function, .-function
/*
* EXPORT - export definition of symbol
*/
#define EXPORT(symbol) \
.globl symbol; \
symbol:
/*
* FEXPORT - export definition of a function symbol
*/
#define FEXPORT(symbol) \
.globl symbol; \
.type symbol, @function; \
symbol:
/*
* ABS - export absolute symbol
*/
#define ABS(symbol,value) \
.globl symbol; \
symbol = value
#define PANIC(msg) \
.set push; \
.set reorder; \
PTR_LA a0, 8f; \
jal panic; \
9: b 9b; \
.set pop; \
TEXT(msg)
/*
* Print formatted string
*/
#ifdef CONFIG_PRINTK
#define PRINT(string) \
.set push; \
.set reorder; \
PTR_LA a0, 8f; \
jal printk; \
.set pop; \
TEXT(string)
#else
#define PRINT(string)
#endif
#define TEXT(msg) \
.pushsection .data; \
8: .asciiz msg; \
.popsection;
/*
* Build text tables
*/
#define TTABLE(string) \
.pushsection .text; \
.word 1f; \
.popsection \
.pushsection .data; \
1: .asciiz string; \
.popsection
/*
* MIPS IV pref instruction.
* Use with .set noreorder only!
*
* MIPS IV implementations are free to treat this as a nop. The R5000
* is one of them. So we should have an option not to use this instruction.
*/
#ifdef CONFIG_CPU_HAS_PREFETCH
#define PREF(hint,addr) \
.set push; \
.set mips4; \
pref hint, addr; \
.set pop
#define PREFX(hint,addr) \
.set push; \
.set mips4; \
prefx hint, addr; \
.set pop
#else /* !CONFIG_CPU_HAS_PREFETCH */
#define PREF(hint, addr)
#define PREFX(hint, addr)
#endif /* !CONFIG_CPU_HAS_PREFETCH */
/*
* MIPS ISA IV/V movn/movz instructions and equivalents for older CPUs.
*/
#if (_MIPS_ISA == _MIPS_ISA_MIPS1)
#define MOVN(rd, rs, rt) \
.set push; \
.set reorder; \
beqz rt, 9f; \
move rd, rs; \
.set pop; \
9:
#define MOVZ(rd, rs, rt) \
.set push; \
.set reorder; \
bnez rt, 9f; \
move rd, rs; \
.set pop; \
9:
#endif /* _MIPS_ISA == _MIPS_ISA_MIPS1 */
#if (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3)
#define MOVN(rd, rs, rt) \
.set push; \
.set noreorder; \
bnezl rt, 9f; \
move rd, rs; \
.set pop; \
9:
#define MOVZ(rd, rs, rt) \
.set push; \
.set noreorder; \
beqzl rt, 9f; \
move rd, rs; \
.set pop; \
9:
#endif /* (_MIPS_ISA == _MIPS_ISA_MIPS2) || (_MIPS_ISA == _MIPS_ISA_MIPS3) */
#if (_MIPS_ISA == _MIPS_ISA_MIPS4 ) || (_MIPS_ISA == _MIPS_ISA_MIPS5) || \
(_MIPS_ISA == _MIPS_ISA_MIPS32) || (_MIPS_ISA == _MIPS_ISA_MIPS64)
#define MOVN(rd, rs, rt) \
movn rd, rs, rt
#define MOVZ(rd, rs, rt) \
movz rd, rs, rt
#endif /* MIPS IV, MIPS V, MIPS32 or MIPS64 */
/*
* Stack alignment
*/
#if (_MIPS_SIM == _MIPS_SIM_ABI32)
#define ALSZ 7
#define ALMASK ~7
#endif
#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
#define ALSZ 15
#define ALMASK ~15
#endif
/*
* Macros to handle different pointer/register sizes for 32/64-bit code
*/
/*
* Size of a register
*/
#ifdef __mips64
#define SZREG 8
#else
#define SZREG 4
#endif
/*
* Use the following macros in assemblercode to load/store registers,
* pointers etc.
*/
#if (_MIPS_SIM == _MIPS_SIM_ABI32)
#define REG_S sw
#define REG_L lw
#define REG_SUBU subu
#define REG_ADDU addu
#endif
#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
#define REG_S sd
#define REG_L ld
#define REG_SUBU dsubu
#define REG_ADDU daddu
#endif
/*
* How to add/sub/load/store/shift C int variables.
*/
#if (_MIPS_SZINT == 32)
#define INT_ADD add
#define INT_ADDU addu
#define INT_ADDI addi
#define INT_ADDIU addiu
#define INT_SUB sub
#define INT_SUBU subu
#define INT_L lw
#define INT_S sw
#define INT_SLL sll
#define INT_SLLV sllv
#define INT_SRL srl
#define INT_SRLV srlv
#define INT_SRA sra
#define INT_SRAV srav
#endif
#if (_MIPS_SZINT == 64)
#define INT_ADD dadd
#define INT_ADDU daddu
#define INT_ADDI daddi
#define INT_ADDIU daddiu
#define INT_SUB dsub
#define INT_SUBU dsubu
#define INT_L ld
#define INT_S sd
#define INT_SLL dsll
#define INT_SLLV dsllv
#define INT_SRL dsrl
#define INT_SRLV dsrlv
#define INT_SRA dsra
#define INT_SRAV dsrav
#endif
/*
* How to add/sub/load/store/shift C long variables.
*/
#if (_MIPS_SZLONG == 32)
#define LONG_ADD add
#define LONG_ADDU addu
#define LONG_ADDI addi
#define LONG_ADDIU addiu
#define LONG_SUB sub
#define LONG_SUBU subu
#define LONG_L lw
#define LONG_S sw
#define LONG_SLL sll
#define LONG_SLLV sllv
#define LONG_SRL srl
#define LONG_SRLV srlv
#define LONG_SRA sra
#define LONG_SRAV srav
#define LONG .word
#define LONGSIZE 4
#define LONGMASK 3
#define LONGLOG 2
#endif
#if (_MIPS_SZLONG == 64)
#define LONG_ADD dadd
#define LONG_ADDU daddu
#define LONG_ADDI daddi
#define LONG_ADDIU daddiu
#define LONG_SUB dsub
#define LONG_SUBU dsubu
#define LONG_L ld
#define LONG_S sd
#define LONG_SLL dsll
#define LONG_SLLV dsllv
#define LONG_SRL dsrl
#define LONG_SRLV dsrlv
#define LONG_SRA dsra
#define LONG_SRAV dsrav
#define LONG .dword
#define LONGSIZE 8
#define LONGMASK 7
#define LONGLOG 3
#endif
/*
* How to add/sub/load/store/shift pointers.
*/
#if (_MIPS_SZPTR == 32)
#define PTR_ADD add
#define PTR_ADDU addu
#define PTR_ADDI addi
#define PTR_ADDIU addiu
#define PTR_SUB sub
#define PTR_SUBU subu
#define PTR_L lw
#define PTR_S sw
#define PTR_LA la
#define PTR_LI li
#define PTR_SLL sll
#define PTR_SLLV sllv
#define PTR_SRL srl
#define PTR_SRLV srlv
#define PTR_SRA sra
#define PTR_SRAV srav
#define PTR_SCALESHIFT 2
#define PTR .word
#define PTRSIZE 4
#define PTRLOG 2
#endif
#if (_MIPS_SZPTR == 64)
#define PTR_ADD dadd
#define PTR_ADDU daddu
#define PTR_ADDI daddi
#define PTR_ADDIU daddiu
#define PTR_SUB dsub
#define PTR_SUBU dsubu
#define PTR_L ld
#define PTR_S sd
#define PTR_LA dla
#define PTR_LI dli
#define PTR_SLL dsll
#define PTR_SLLV dsllv
#define PTR_SRL dsrl
#define PTR_SRLV dsrlv
#define PTR_SRA dsra
#define PTR_SRAV dsrav
#define PTR_SCALESHIFT 3
#define PTR .dword
#define PTRSIZE 8
#define PTRLOG 3
#endif
/*
* Some cp0 registers were extended to 64bit for MIPS III.
*/
#if (_MIPS_SIM == _MIPS_SIM_ABI32)
#define MFC0 mfc0
#define MTC0 mtc0
#endif
#if (_MIPS_SIM == _MIPS_SIM_NABI32) || (_MIPS_SIM == _MIPS_SIM_ABI64)
#define MFC0 dmfc0
#define MTC0 dmtc0
#endif
#define SSNOP sll zero, zero, 1
#ifdef CONFIG_SGI_IP28
/* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
#include <asm/cacheops.h>
#define R10KCBARRIER(addr) cache Cache_Barrier, addr;
#else
#define R10KCBARRIER(addr)
#endif
#endif /* __ASM_ASM_H */