1. 根目录:
2. drivers
3. staging
4. msm
5. mdp_vsync.c

/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 and
 * only version 2 as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 * 02110-1301, USA.
 */

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/hrtimer.h>
#include <linux/vmalloc.h>
#include <linux/clk.h>

#include <mach/hardware.h>
#include <linux/io.h>

#include <asm/system.h>
#include <asm/mach-types.h>
#include <linux/semaphore.h>
#include <linux/uaccess.h>
#include <mach/gpio.h>

#include "mdp.h"
#include "msm_fb.h"
#include "mddihost.h"

#ifdef CONFIG_FB_MSM_MDP40
#define MDP_SYNC_CFG_0		0x100
#define MDP_SYNC_STATUS_0	0x10c
#define MDP_PRIM_VSYNC_OUT_CTRL	0x118
#define MDP_PRIM_VSYNC_INIT_VAL	0x128
#else
#define MDP_SYNC_CFG_0		0x300
#define MDP_SYNC_STATUS_0	0x30c
#define MDP_PRIM_VSYNC_OUT_CTRL	0x318
#define MDP_PRIM_VSYNC_INIT_VAL	0x328
#endif

extern mddi_lcd_type mddi_lcd_idx;
extern spinlock_t mdp_spin_lock;
extern struct workqueue_struct *mdp_vsync_wq;
extern int lcdc_mode;
extern int vsync_mode;

#ifdef MDP_HW_VSYNC
int vsync_above_th = 4;
int vsync_start_th = 1;
int vsync_load_cnt;

struct clk *mdp_vsync_clk;

void mdp_hw_vsync_clk_enable(struct msm_fb_data_type *mfd)
{
	if (mfd->use_mdp_vsync)
		clk_enable(mdp_vsync_clk);
}

void mdp_hw_vsync_clk_disable(struct msm_fb_data_type *mfd)
{
	if (mfd->use_mdp_vsync)
		clk_disable(mdp_vsync_clk);
}
#endif

static void mdp_set_vsync(unsigned long data)
{
	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;
	struct msm_fb_panel_data *pdata = NULL;

	pdata = (struct msm_fb_panel_data *)mfd->pdev->dev.platform_data;

	if ((pdata) && (pdata->set_vsync_notifier == NULL))
		return;

	init_timer(&mfd->vsync_resync_timer);
	mfd->vsync_resync_timer.function = mdp_set_vsync;
	mfd->vsync_resync_timer.data = data;
	mfd->vsync_resync_timer.expires =
	    jiffies + mfd->panel_info.lcd.vsync_notifier_period;
	add_timer(&mfd->vsync_resync_timer);

	if ((mfd->panel_info.lcd.vsync_enable) && (mfd->panel_power_on)
	    && (!mfd->vsync_handler_pending)) {
		mfd->vsync_handler_pending = TRUE;
		if (!queue_work(mdp_vsync_wq, &mfd->vsync_resync_worker)) {
			MSM_FB_INFO
			    ("mdp_set_vsync: can't queue_work! -> needs to increase vsync_resync_timer_duration\n");
		}
	} else {
		MSM_FB_DEBUG
		    ("mdp_set_vsync failed!  EN:%d  PWR:%d  PENDING:%d\n",
		     mfd->panel_info.lcd.vsync_enable, mfd->panel_power_on,
		     mfd->vsync_handler_pending);
	}
}

static void mdp_vsync_handler(void *data)
{
	struct msm_fb_data_type *mfd = (struct msm_fb_data_type *)data;

	if (mfd->use_mdp_vsync) {
#ifdef MDP_HW_VSYNC
		if (mfd->panel_power_on)
			MDP_OUTP(MDP_BASE + MDP_SYNC_STATUS_0, vsync_load_cnt);

		mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_OFF, TRUE);
#endif
	} else {
		mfd->last_vsync_timetick = ktime_get_real();
	}

	mfd->vsync_handler_pending = FALSE;
}

irqreturn_t mdp_hw_vsync_handler_proxy(int irq, void *data)
{
	/*
	 * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
	 * but getting inaccurate timing in mdp_vsync_handler()
	 * disable_irq(MDP_HW_VSYNC_IRQ);
	 */
	mdp_vsync_handler(data);

	return IRQ_HANDLED;
}

#ifdef MDP_HW_VSYNC
static void mdp_set_sync_cfg_0(struct msm_fb_data_type *mfd, int vsync_cnt)
{
	unsigned long cfg;

	cfg = mfd->total_lcd_lines - 1;
	cfg <<= MDP_SYNCFG_HGT_LOC;
	if (mfd->panel_info.lcd.hw_vsync_mode)
		cfg |= MDP_SYNCFG_VSYNC_EXT_EN;
	cfg |= (MDP_SYNCFG_VSYNC_INT_EN | vsync_cnt);

	MDP_OUTP(MDP_BASE + MDP_SYNC_CFG_0, cfg);
}
#endif

void mdp_config_vsync(struct msm_fb_data_type *mfd)
{

	/* vsync on primary lcd only for now */
	if ((mfd->dest != DISPLAY_LCD) || (mfd->panel_info.pdest != DISPLAY_1)
	    || (!vsync_mode)) {
		goto err_handle;
	}

	if (mfd->panel_info.lcd.vsync_enable) {
		mfd->total_porch_lines = mfd->panel_info.lcd.v_back_porch +
		    mfd->panel_info.lcd.v_front_porch +
		    mfd->panel_info.lcd.v_pulse_width;
		mfd->total_lcd_lines =
		    mfd->panel_info.yres + mfd->total_porch_lines;
		mfd->lcd_ref_usec_time =
		    100000000 / mfd->panel_info.lcd.refx100;
		mfd->vsync_handler_pending = FALSE;
		mfd->last_vsync_timetick.tv.sec = 0;
		mfd->last_vsync_timetick.tv.nsec = 0;

#ifdef MDP_HW_VSYNC
		if (mdp_vsync_clk == NULL)
			mdp_vsync_clk = clk_get(NULL, "mdp_vsync_clk");

		if (IS_ERR(mdp_vsync_clk)) {
			printk(KERN_ERR "error: can't get mdp_vsync_clk!\n");
			mfd->use_mdp_vsync = 0;
		} else
			mfd->use_mdp_vsync = 1;

		if (mfd->use_mdp_vsync) {
			uint32 vsync_cnt_cfg, vsync_cnt_cfg_dem;
			uint32 mdp_vsync_clk_speed_hz;

			mdp_vsync_clk_speed_hz = clk_get_rate(mdp_vsync_clk);

			if (mdp_vsync_clk_speed_hz == 0) {
				mfd->use_mdp_vsync = 0;
			} else {
				/*
				 * Do this calculation in 2 steps for
				 * rounding uint32 properly.
				 */
				vsync_cnt_cfg_dem =
				    (mfd->panel_info.lcd.refx100 *
				     mfd->total_lcd_lines) / 100;
				vsync_cnt_cfg =
				    (mdp_vsync_clk_speed_hz) /
				    vsync_cnt_cfg_dem;

				/* MDP cmd block enable */
				mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
					      FALSE);
				mdp_hw_vsync_clk_enable(mfd);

				mdp_set_sync_cfg_0(mfd, vsync_cnt_cfg);

				/*
				 * load the last line + 1 to be in the
				 * safety zone
				 */
				vsync_load_cnt = mfd->panel_info.yres;

				/* line counter init value at the next pulse */
				MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_INIT_VAL,
							vsync_load_cnt);

				/*
				 * external vsync source pulse width and
				 * polarity flip
				 */
				MDP_OUTP(MDP_BASE + MDP_PRIM_VSYNC_OUT_CTRL,
							BIT(30) | BIT(0));


				/* threshold */
				MDP_OUTP(MDP_BASE + 0x200,
					 (vsync_above_th << 16) |
					 (vsync_start_th));

				mdp_hw_vsync_clk_disable(mfd);
				/* MDP cmd block disable */
				mdp_pipe_ctrl(MDP_CMD_BLOCK,
					      MDP_BLOCK_POWER_OFF, FALSE);
			}
		}
#else
		mfd->use_mdp_vsync = 0;
		hrtimer_init(&mfd->dma_hrtimer, CLOCK_MONOTONIC,
			     HRTIMER_MODE_REL);
		mfd->dma_hrtimer.function = mdp_dma2_vsync_hrtimer_handler;
		mfd->vsync_width_boundary = vmalloc(mfd->panel_info.xres * 4);
#endif

		mfd->channel_irq = 0;
		if (mfd->panel_info.lcd.hw_vsync_mode) {
			u32 vsync_gpio = mfd->vsync_gpio;
			u32 ret;

			if (vsync_gpio == -1) {
				MSM_FB_INFO("vsync_gpio not defined!\n");
				goto err_handle;
			}

			ret = gpio_tlmm_config(GPIO_CFG
					(vsync_gpio,
					(mfd->use_mdp_vsync) ? 1 : 0,
					GPIO_INPUT,
					GPIO_PULL_DOWN,
					GPIO_2MA),
					GPIO_ENABLE);
			if (ret)
				goto err_handle;

			if (!mfd->use_mdp_vsync) {
				mfd->channel_irq = MSM_GPIO_TO_INT(vsync_gpio);
				if (request_irq
				    (mfd->channel_irq,
				     &mdp_hw_vsync_handler_proxy,
				     IRQF_TRIGGER_FALLING, "VSYNC_GPIO",
				     (void *)mfd)) {
					MSM_FB_INFO
					("irq=%d failed! vsync_gpio=%d\n",
						mfd->channel_irq,
						vsync_gpio);
					goto err_handle;
				}
			}
		}

		mdp_set_vsync((unsigned long)mfd);
	}

	return;

err_handle:
	if (mfd->vsync_width_boundary)
		vfree(mfd->vsync_width_boundary);
	mfd->panel_info.lcd.vsync_enable = FALSE;
	printk(KERN_ERR "%s: failed!\n", __func__);
}

void mdp_vsync_resync_workqueue_handler(struct work_struct *work)
{
	struct msm_fb_data_type *mfd = NULL;
	int vsync_fnc_enabled = FALSE;
	struct msm_fb_panel_data *pdata = NULL;

	mfd = container_of(work, struct msm_fb_data_type, vsync_resync_worker);

	if (mfd) {
		if (mfd->panel_power_on) {
			pdata =
			    (struct msm_fb_panel_data *)mfd->pdev->dev.
			    platform_data;

			/*
			 * we need to turn on MDP power if it uses MDP vsync
			 * HW block in SW mode
			 */
			if ((!mfd->panel_info.lcd.hw_vsync_mode) &&
			    (mfd->use_mdp_vsync) &&
			    (pdata) && (pdata->set_vsync_notifier != NULL)) {
				/*
				 * enable pwr here since we can't enable it in
				 * vsync callback in isr mode
				 */
				mdp_pipe_ctrl(MDP_CMD_BLOCK, MDP_BLOCK_POWER_ON,
					      FALSE);
			}

			if (pdata->set_vsync_notifier != NULL) {
				vsync_fnc_enabled = TRUE;
				pdata->set_vsync_notifier(mdp_vsync_handler,
							  (void *)mfd);
			}
		}
	}

	if ((mfd) && (!vsync_fnc_enabled))
		mfd->vsync_handler_pending = FALSE;
}

boolean mdp_hw_vsync_set_handler(msm_fb_vsync_handler_type handler, void *data)
{
	/*
	 * ToDo: tried enabling/disabling GPIO MDP HW VSYNC interrupt
	 * but getting inaccurate timing in mdp_vsync_handler()
	 * enable_irq(MDP_HW_VSYNC_IRQ);
	 */

	return TRUE;
}

uint32 mdp_get_lcd_line_counter(struct msm_fb_data_type *mfd)
{
	uint32 elapsed_usec_time;
	uint32 lcd_line;
	ktime_t last_vsync_timetick_local;
	ktime_t curr_time;
	unsigned long flag;

	if ((!mfd->panel_info.lcd.vsync_enable) || (!vsync_mode))
		return 0;

	spin_lock_irqsave(&mdp_spin_lock, flag);
	last_vsync_timetick_local = mfd->last_vsync_timetick;
	spin_unlock_irqrestore(&mdp_spin_lock, flag);

	curr_time = ktime_get_real();
	elapsed_usec_time =
	    ((curr_time.tv.sec - last_vsync_timetick_local.tv.sec) * 1000000) +
	    ((curr_time.tv.nsec - last_vsync_timetick_local.tv.nsec) / 1000);

	elapsed_usec_time = elapsed_usec_time % mfd->lcd_ref_usec_time;

	/* lcd line calculation referencing to line counter = 0 */
	lcd_line =
	    (elapsed_usec_time * mfd->total_lcd_lines) / mfd->lcd_ref_usec_time;

	/* lcd line adjusment referencing to the actual line counter at vsync */
	lcd_line =
	    (mfd->total_lcd_lines - mfd->panel_info.lcd.v_back_porch +
	     lcd_line) % (mfd->total_lcd_lines + 1);

	if (lcd_line > mfd->total_lcd_lines) {
		MSM_FB_INFO
		    ("mdp_get_lcd_line_counter: mdp_lcd_rd_cnt >= mfd->total_lcd_lines error!\n");
	}

	return lcd_line;
}