1. 根目录:
2. include
3. linux
4. usb
5. msm_hsusb.h

/* linux/include/asm-arm/arch-msm/hsusb.h
 *
 * Copyright (C) 2008 Google, Inc.
 * Author: Brian Swetland <swetland@google.com>
 * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
 *
 * This software is licensed under the terms of the GNU General Public
 * License version 2, as published by the Free Software Foundation, and
 * may be copied, distributed, and modified under those terms.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#ifndef __ASM_ARCH_MSM_HSUSB_H
#define __ASM_ARCH_MSM_HSUSB_H

#include <linux/types.h>
#include <linux/usb/otg.h>

/**
 * Supported USB modes
 *
 * USB_PERIPHERAL       Only peripheral mode is supported.
 * USB_HOST             Only host mode is supported.
 * USB_OTG              OTG mode is supported.
 *
 */
enum usb_mode_type {
	USB_NONE = 0,
	USB_PERIPHERAL,
	USB_HOST,
	USB_OTG,
};

/**
 * OTG control
 *
 * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
 *                      only configuration.
 * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
 * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
 * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
 *
 */
enum otg_control_type {
	OTG_NO_CONTROL = 0,
	OTG_PHY_CONTROL,
	OTG_PMIC_CONTROL,
	OTG_USER_CONTROL,
};

/**
 * struct msm_otg_platform_data - platform device data
 *              for msm_otg driver.
 * @phy_init_seq: PHY configuration sequence. val, reg pairs
 *              terminated by -1.
 * @vbus_power: VBUS power on/off routine.
 * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
 * @mode: Supported mode (OTG/peripheral/host).
 * @otg_control: OTG switch controlled by user/Id pin
 * @default_mode: Default operational mode. Applicable only if
 *              OTG switch is controller by user.
 *
 */
struct msm_otg_platform_data {
	int *phy_init_seq;
	void (*vbus_power)(bool on);
	unsigned power_budget;
	enum usb_mode_type mode;
	enum otg_control_type otg_control;
	enum usb_mode_type default_mode;
	void (*setup_gpio)(enum usb_otg_state state);
};

/**
 * struct msm_otg: OTG driver data. Shared by HCD and DCD.
 * @otg: USB OTG Transceiver structure.
 * @pdata: otg device platform data.
 * @irq: IRQ number assigned for HSUSB controller.
 * @clk: clock struct of usb_hs_clk.
 * @pclk: clock struct of usb_hs_pclk.
 * @phy_reset_clk: clock struct of usb_phy_clk.
 * @core_clk: clock struct of usb_hs_core_clk.
 * @regs: ioremapped register base address.
 * @inputs: OTG state machine inputs(Id, SessValid etc).
 * @sm_work: OTG state machine work.
 * @in_lpm: indicates low power mode (LPM) state.
 * @async_int: Async interrupt arrived.
 *
 */
struct msm_otg {
	struct otg_transceiver otg;
	struct msm_otg_platform_data *pdata;
	int irq;
	struct clk *clk;
	struct clk *pclk;
	struct clk *phy_reset_clk;
	struct clk *core_clk;
	void __iomem *regs;
#define ID		0
#define B_SESS_VLD	1
	unsigned long inputs;
	struct work_struct sm_work;
	atomic_t in_lpm;
	int async_int;
};

#endif