- 根目录:
- drivers
- staging
- brcm80211
- include
- wlioctl.h
/*
* Copyright (c) 2010 Broadcom Corporation
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _wlioctl_h_
#define _wlioctl_h_
#include <linux/ieee80211.h>
#ifdef BRCM_FULLMAC
#include <proto/bcmeth.h>
#endif
#include <proto/bcmevent.h>
#include <proto/802.11.h>
#include <bcmwifi.h>
#ifndef INTF_NAME_SIZ
#define INTF_NAME_SIZ 16
#endif
#ifdef BRCM_FULLMAC
#define WL_BSS_INFO_VERSION 108 /* current ver of wl_bss_info struct */
/* BSS info structure
* Applications MUST CHECK ie_offset field and length field to access IEs and
* next bss_info structure in a vector (in wl_scan_results_t)
*/
typedef struct wl_bss_info {
u32 version; /* version field */
u32 length; /* byte length of data in this record,
* starting at version and including IEs
*/
u8 BSSID[ETH_ALEN];
u16 beacon_period; /* units are Kusec */
u16 capability; /* Capability information */
u8 SSID_len;
u8 SSID[32];
struct {
uint count; /* # rates in this set */
u8 rates[16]; /* rates in 500kbps units w/hi bit set if basic */
} rateset; /* supported rates */
chanspec_t chanspec; /* chanspec for bss */
u16 atim_window; /* units are Kusec */
u8 dtim_period; /* DTIM period */
s16 RSSI; /* receive signal strength (in dBm) */
s8 phy_noise; /* noise (in dBm) */
u8 n_cap; /* BSS is 802.11N Capable */
u32 nbss_cap; /* 802.11N BSS Capabilities (based on HT_CAP_*) */
u8 ctl_ch; /* 802.11N BSS control channel number */
u32 reserved32[1]; /* Reserved for expansion of BSS properties */
u8 flags; /* flags */
u8 reserved[3]; /* Reserved for expansion of BSS properties */
u8 basic_mcs[MCSSET_LEN]; /* 802.11N BSS required MCS set */
u16 ie_offset; /* offset at which IEs start, from beginning */
u32 ie_length; /* byte length of Information Elements */
s16 SNR; /* average SNR of during frame reception */
/* Add new fields here */
/* variable length Information Elements */
} wl_bss_info_t;
#endif /* BRCM_FULLMAC */
typedef struct wlc_ssid {
u32 SSID_len;
unsigned char SSID[32];
} wlc_ssid_t;
#ifdef BRCM_FULLMAC
typedef struct chan_scandata {
u8 txpower;
u8 pad;
chanspec_t channel; /* Channel num, bw, ctrl_sb and band */
u32 channel_mintime;
u32 channel_maxtime;
} chan_scandata_t;
typedef enum wl_scan_type {
EXTDSCAN_FOREGROUND_SCAN,
EXTDSCAN_BACKGROUND_SCAN,
EXTDSCAN_FORCEDBACKGROUND_SCAN
} wl_scan_type_t;
#define WLC_EXTDSCAN_MAX_SSID 5
#define WL_BSS_FLAGS_FROM_BEACON 0x01 /* bss_info derived from beacon */
#define WL_BSS_FLAGS_FROM_CACHE 0x02 /* bss_info collected from cache */
#define WL_BSS_FLAGS_RSSI_ONCHANNEL 0x04 /* rssi info was received on channel (vs offchannel) */
typedef struct wl_extdscan_params {
s8 nprobes; /* 0, passive, otherwise active */
s8 split_scan; /* split scan */
s8 band; /* band */
s8 pad;
wlc_ssid_t ssid[WLC_EXTDSCAN_MAX_SSID]; /* ssid list */
u32 tx_rate; /* in 500ksec units */
wl_scan_type_t scan_type; /* enum */
s32 channel_num;
chan_scandata_t channel_list[1]; /* list of chandata structs */
} wl_extdscan_params_t;
#define WL_EXTDSCAN_PARAMS_FIXED_SIZE (sizeof(wl_extdscan_params_t) - sizeof(chan_scandata_t))
#define WL_BSSTYPE_INFRA 1
#define WL_BSSTYPE_INDEP 0
#define WL_BSSTYPE_ANY 2
/* Bitmask for scan_type */
#define WL_SCANFLAGS_PASSIVE 0x01 /* force passive scan */
#define WL_SCANFLAGS_RESERVED 0x02 /* Reserved */
#define WL_SCANFLAGS_PROHIBITED 0x04 /* allow scanning prohibited channels */
typedef struct wl_scan_params {
wlc_ssid_t ssid; /* default: {0, ""} */
u8 bssid[ETH_ALEN]; /* default: bcast */
s8 bss_type; /* default: any,
* DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
*/
u8 scan_type; /* flags, 0 use default */
s32 nprobes; /* -1 use default, number of probes per channel */
s32 active_time; /* -1 use default, dwell time per channel for
* active scanning
*/
s32 passive_time; /* -1 use default, dwell time per channel
* for passive scanning
*/
s32 home_time; /* -1 use default, dwell time for the home channel
* between channel scans
*/
s32 channel_num; /* count of channels and ssids that follow
*
* low half is count of channels in channel_list, 0
* means default (use all available channels)
*
* high half is entries in wlc_ssid_t array that
* follows channel_list, aligned for s32 (4 bytes)
* meaning an odd channel count implies a 2-byte pad
* between end of channel_list and first ssid
*
* if ssid count is zero, single ssid in the fixed
* parameter portion is assumed, otherwise ssid in
* the fixed portion is ignored
*/
u16 channel_list[1]; /* list of chanspecs */
} wl_scan_params_t;
/* size of wl_scan_params not including variable length array */
#define WL_SCAN_PARAMS_FIXED_SIZE 64
/* masks for channel and ssid count */
#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
#define WL_SCAN_PARAMS_NSSID_SHIFT 16
#define WL_SCAN_ACTION_START 1
#define WL_SCAN_ACTION_CONTINUE 2
#define WL_SCAN_ACTION_ABORT 3
#define ISCAN_REQ_VERSION 1
/* incremental scan struct */
typedef struct wl_iscan_params {
u32 version;
u16 action;
u16 scan_duration;
wl_scan_params_t params;
} wl_iscan_params_t;
/* 3 fields + size of wl_scan_params, not including variable length array */
#define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t))
typedef struct wl_scan_results {
u32 buflen;
u32 version;
u32 count;
wl_bss_info_t bss_info[1];
} wl_scan_results_t;
/* size of wl_scan_results not including variable length array */
#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t))
/* wl_iscan_results status values */
#define WL_SCAN_RESULTS_SUCCESS 0
#define WL_SCAN_RESULTS_PARTIAL 1
#define WL_SCAN_RESULTS_PENDING 2
#define WL_SCAN_RESULTS_ABORTED 3
#define WL_SCAN_RESULTS_NO_MEM 4
#define ESCAN_REQ_VERSION 1
typedef struct wl_escan_params {
u32 version;
u16 action;
u16 sync_id;
wl_scan_params_t params;
} wl_escan_params_t;
#define WL_ESCAN_PARAMS_FIXED_SIZE (offsetof(wl_escan_params_t, params) + sizeof(wlc_ssid_t))
typedef struct wl_escan_result {
u32 buflen;
u32 version;
u16 sync_id;
u16 bss_count;
wl_bss_info_t bss_info[1];
} wl_escan_result_t;
#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(wl_escan_result_t) - sizeof(wl_bss_info_t))
/* incremental scan results struct */
typedef struct wl_iscan_results {
u32 status;
wl_scan_results_t results;
} wl_iscan_results_t;
/* size of wl_iscan_results not including variable length array */
#define WL_ISCAN_RESULTS_FIXED_SIZE \
(WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results))
typedef struct wl_probe_params {
wlc_ssid_t ssid;
u8 bssid[ETH_ALEN];
u8 mac[ETH_ALEN];
} wl_probe_params_t;
#endif /* BRCM_FULLMAC */
#define WL_NUMRATES 16 /* max # of rates in a rateset */
typedef struct wl_rateset {
u32 count; /* # rates in this set */
u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
} wl_rateset_t;
#ifdef BRCM_FULLMAC
typedef struct wl_rateset_args {
u32 count; /* # rates in this set */
u8 rates[WL_NUMRATES]; /* rates in 500kbps units w/hi bit set if basic */
u8 mcs[MCSSET_LEN]; /* supported mcs index bit map */
} wl_rateset_args_t;
/* u32 list */
typedef struct wl_u32_list {
/* in - # of elements, out - # of entries */
u32 count;
/* variable length u32 list */
u32 element[1];
} wl_u32_list_t;
/* used for association with a specific BSSID and chanspec list */
typedef struct wl_assoc_params {
u8 bssid[ETH_ALEN]; /* 00:00:00:00:00:00: broadcast scan */
u16 bssid_cnt;
s32 chanspec_num; /* 0: all available channels,
* otherwise count of chanspecs in chanspec_list
*/
chanspec_t chanspec_list[1]; /* list of chanspecs */
} wl_assoc_params_t;
#define WL_ASSOC_PARAMS_FIXED_SIZE (sizeof(wl_assoc_params_t) - sizeof(chanspec_t))
/* used for reassociation/roam to a specific BSSID and channel */
typedef wl_assoc_params_t wl_reassoc_params_t;
#define WL_REASSOC_PARAMS_FIXED_SIZE WL_ASSOC_PARAMS_FIXED_SIZE
/* used for join with or without a specific bssid and channel list */
typedef struct wl_join_params {
wlc_ssid_t ssid;
wl_assoc_params_t params; /* optional field, but it must include the fixed portion
* of the wl_assoc_params_t struct when it does present.
*/
} wl_join_params_t;
#define WL_JOIN_PARAMS_FIXED_SIZE (sizeof(wl_join_params_t) - sizeof(chanspec_t))
#endif /* BRCM_FULLMAC */
/* defines used by the nrate iovar */
#define NRATE_MCS_INUSE 0x00000080 /* MSC in use,indicates b0-6 holds an mcs */
#define NRATE_RATE_MASK 0x0000007f /* rate/mcs value */
#define NRATE_STF_MASK 0x0000ff00 /* stf mode mask: siso, cdd, stbc, sdm */
#define NRATE_STF_SHIFT 8 /* stf mode shift */
#define NRATE_OVERRIDE 0x80000000 /* bit indicates override both rate & mode */
#define NRATE_OVERRIDE_MCS_ONLY 0x40000000 /* bit indicate to override mcs only */
#define NRATE_SGI_MASK 0x00800000 /* sgi mode */
#define NRATE_SGI_SHIFT 23 /* sgi mode */
#define NRATE_LDPC_CODING 0x00400000 /* bit indicates adv coding in use */
#define NRATE_LDPC_SHIFT 22 /* ldpc shift */
#define NRATE_STF_SISO 0 /* stf mode SISO */
#define NRATE_STF_CDD 1 /* stf mode CDD */
#define NRATE_STF_STBC 2 /* stf mode STBC */
#define NRATE_STF_SDM 3 /* stf mode SDM */
#define ANTENNA_NUM_1 1 /* total number of antennas to be used */
#define ANTENNA_NUM_2 2
#define ANTENNA_NUM_3 3
#define ANTENNA_NUM_4 4
#define ANT_SELCFG_AUTO 0x80 /* bit indicates antenna sel AUTO */
#define ANT_SELCFG_MASK 0x33 /* antenna configuration mask */
#define ANT_SELCFG_MAX 4 /* max number of antenna configurations */
#define ANT_SELCFG_TX_UNICAST 0 /* unicast tx antenna configuration */
#define ANT_SELCFG_RX_UNICAST 1 /* unicast rx antenna configuration */
#define ANT_SELCFG_TX_DEF 2 /* default tx antenna configuration */
#define ANT_SELCFG_RX_DEF 3 /* default rx antenna configuration */
#define MAX_STREAMS_SUPPORTED 4 /* max number of streams supported */
typedef struct {
u8 ant_config[ANT_SELCFG_MAX]; /* antenna configuration */
u8 num_antcfg; /* number of available antenna configurations */
} wlc_antselcfg_t;
#define HIGHEST_SINGLE_STREAM_MCS 7 /* MCS values greater than this enable multiple streams */
#ifdef BRCM_FULLMAC
#define MAX_CCA_CHANNELS 38 /* Max number of 20 Mhz wide channels */
#define MAX_CCA_SECS 60 /* CCA keeps this many seconds history */
#define IBSS_MED 15 /* Mediom in-bss congestion percentage */
#define IBSS_HI 25 /* Hi in-bss congestion percentage */
#define OBSS_MED 12
#define OBSS_HI 25
#define INTERFER_MED 5
#define INTERFER_HI 10
#define CCA_FLAG_2G_ONLY 0x01 /* Return a channel from 2.4 Ghz band */
#define CCA_FLAG_5G_ONLY 0x02 /* Return a channel from 2.4 Ghz band */
#define CCA_FLAG_IGNORE_DURATION 0x04 /* Ignore dwell time for each channel */
#define CCA_FLAGS_PREFER_1_6_11 0x10
#define CCA_FLAG_IGNORE_INTERFER 0x20 /* do not exlude channel based on interfer level */
#define CCA_ERRNO_BAND 1 /* After filtering for band pref, no choices left */
#define CCA_ERRNO_DURATION 2 /* After filtering for duration, no choices left */
#define CCA_ERRNO_PREF_CHAN 3 /* After filtering for chan pref, no choices left */
#define CCA_ERRNO_INTERFER 4 /* After filtering for interference, no choices left */
#define CCA_ERRNO_TOO_FEW 5 /* Only 1 channel was input */
typedef struct {
u32 duration; /* millisecs spent sampling this channel */
u32 congest_ibss; /* millisecs in our bss (presumably this traffic will */
/* move if cur bss moves channels) */
u32 congest_obss; /* traffic not in our bss */
u32 interference; /* millisecs detecting a non 802.11 interferer. */
u32 timestamp; /* second timestamp */
} cca_congest_t;
typedef struct {
chanspec_t chanspec; /* Which channel? */
u8 num_secs; /* How many secs worth of data */
cca_congest_t secs[1]; /* Data */
} cca_congest_channel_req_t;
#endif /* BRCM_FULLMAC */
#define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NUL */
#ifdef BRCM_FULLMAC
typedef struct wl_country {
char country_abbrev[WLC_CNTRY_BUF_SZ]; /* nul-terminated country code used in
* the Country IE
*/
s32 rev; /* revision specifier for ccode
* on set, -1 indicates unspecified.
* on get, rev >= 0
*/
char ccode[WLC_CNTRY_BUF_SZ]; /* nul-terminated built-in country code.
* variable length, but fixed size in
* struct allows simple allocation for
* expected country strings <= 3 chars.
*/
} wl_country_t;
typedef struct wl_channels_in_country {
u32 buflen;
u32 band;
char country_abbrev[WLC_CNTRY_BUF_SZ];
u32 count;
u32 channel[1];
} wl_channels_in_country_t;
typedef struct wl_country_list {
u32 buflen;
u32 band_set;
u32 band;
u32 count;
char country_abbrev[1];
} wl_country_list_t;
#define WL_NUM_RPI_BINS 8
#define WL_RM_TYPE_BASIC 1
#define WL_RM_TYPE_CCA 2
#define WL_RM_TYPE_RPI 3
#define WL_RM_FLAG_PARALLEL (1<<0)
#define WL_RM_FLAG_LATE (1<<1)
#define WL_RM_FLAG_INCAPABLE (1<<2)
#define WL_RM_FLAG_REFUSED (1<<3)
typedef struct wl_rm_req_elt {
s8 type;
s8 flags;
chanspec_t chanspec;
u32 token; /* token for this measurement */
u32 tsf_h; /* TSF high 32-bits of Measurement start time */
u32 tsf_l; /* TSF low 32-bits */
u32 dur; /* TUs */
} wl_rm_req_elt_t;
typedef struct wl_rm_req {
u32 token; /* overall measurement set token */
u32 count; /* number of measurement requests */
void *cb; /* completion callback function: may be NULL */
void *cb_arg; /* arg to completion callback function */
wl_rm_req_elt_t req[1]; /* variable length block of requests */
} wl_rm_req_t;
#define WL_RM_REQ_FIXED_LEN offsetof(wl_rm_req_t, req)
typedef struct wl_rm_rep_elt {
s8 type;
s8 flags;
chanspec_t chanspec;
u32 token; /* token for this measurement */
u32 tsf_h; /* TSF high 32-bits of Measurement start time */
u32 tsf_l; /* TSF low 32-bits */
u32 dur; /* TUs */
u32 len; /* byte length of data block */
u8 data[1]; /* variable length data block */
} wl_rm_rep_elt_t;
#define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
#define WL_RPI_REP_BIN_NUM 8
typedef struct wl_rm_rpi_rep {
u8 rpi[WL_RPI_REP_BIN_NUM];
s8 rpi_max[WL_RPI_REP_BIN_NUM];
} wl_rm_rpi_rep_t;
typedef struct wl_rm_rep {
u32 token; /* overall measurement set token */
u32 len; /* length of measurement report block */
wl_rm_rep_elt_t rep[1]; /* variable length block of reports */
} wl_rm_rep_t;
#define WL_RM_REP_FIXED_LEN 8
#endif /* BRCM_FULLMAC */
/* Enumerate crypto algorithms */
#define CRYPTO_ALGO_OFF 0
#define CRYPTO_ALGO_WEP1 1
#define CRYPTO_ALGO_TKIP 2
#define CRYPTO_ALGO_WEP128 3
#define CRYPTO_ALGO_AES_CCM 4
#define CRYPTO_ALGO_AES_RESERVED1 5
#define CRYPTO_ALGO_AES_RESERVED2 6
#define CRYPTO_ALGO_NALG 7
#define WSEC_GEN_MIC_ERROR 0x0001
#define WSEC_GEN_REPLAY 0x0002
#define WSEC_GEN_ICV_ERROR 0x0004
#define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
#define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
#define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
#define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
#define WL_IBSS_PEER_GROUP_KEY (1 << 6) /* Indicates a group key for a IBSS PEER */
typedef struct wl_wsec_key {
u32 index; /* key index */
u32 len; /* key length */
u8 data[WLAN_MAX_KEY_LEN]; /* key data */
u32 pad_1[18];
u32 algo; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
u32 flags; /* misc flags */
u32 pad_2[2];
int pad_3;
int iv_initialized; /* has IV been initialized already? */
int pad_4;
/* Rx IV */
struct {
u32 hi; /* upper 32 bits of IV */
u16 lo; /* lower 16 bits of IV */
} rxiv;
u32 pad_5[2];
u8 ea[ETH_ALEN]; /* per station */
} wl_wsec_key_t;
#define WSEC_MIN_PSK_LEN 8
#define WSEC_MAX_PSK_LEN 64
/* Flag for key material needing passhash'ing */
#define WSEC_PASSPHRASE (1<<0)
/* receptacle for WLC_SET_WSEC_PMK parameter */
typedef struct {
unsigned short key_len; /* octets in key material */
unsigned short flags; /* key handling qualification */
u8 key[WSEC_MAX_PSK_LEN]; /* PMK material */
} wsec_pmk_t;
/* wireless security bitvec */
#define WEP_ENABLED 0x0001
#define TKIP_ENABLED 0x0002
#define AES_ENABLED 0x0004
#define WSEC_SWFLAG 0x0008
#define SES_OW_ENABLED 0x0040 /* to go into transition mode without setting wep */
/* WPA authentication mode bitvec */
#define WPA_AUTH_DISABLED 0x0000 /* Legacy (i.e., non-WPA) */
#define WPA_AUTH_NONE 0x0001 /* none (IBSS) */
#define WPA_AUTH_UNSPECIFIED 0x0002 /* over 802.1x */
#define WPA_AUTH_PSK 0x0004 /* Pre-shared key */
#define WPA_AUTH_RESERVED1 0x0008
#define WPA_AUTH_RESERVED2 0x0010
/* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */
#define WPA2_AUTH_RESERVED1 0x0020
#define WPA2_AUTH_UNSPECIFIED 0x0040 /* over 802.1x */
#define WPA2_AUTH_PSK 0x0080 /* Pre-shared key */
#define WPA2_AUTH_RESERVED3 0x0200
#define WPA2_AUTH_RESERVED4 0x0400
#define WPA2_AUTH_RESERVED5 0x0800
/* pmkid */
#define MAXPMKID 16
typedef struct _pmkid {
u8 BSSID[ETH_ALEN];
u8 PMKID[WLAN_PMKID_LEN];
} pmkid_t;
typedef struct _pmkid_list {
u32 npmkid;
pmkid_t pmkid[1];
} pmkid_list_t;
typedef struct _pmkid_cand {
u8 BSSID[ETH_ALEN];
u8 preauth;
} pmkid_cand_t;
typedef struct _pmkid_cand_list {
u32 npmkid_cand;
pmkid_cand_t pmkid_cand[1];
} pmkid_cand_list_t;
typedef struct wl_led_info {
u32 index; /* led index */
u32 behavior;
u8 activehi;
} wl_led_info_t;
/* R_REG and W_REG struct passed through ioctl */
typedef struct {
u32 byteoff; /* byte offset of the field in d11regs_t */
u32 val; /* read/write value of the field */
u32 size; /* sizeof the field */
uint band; /* band (optional) */
} rw_reg_t;
#ifdef BRCM_FULLMAC
/* Used to get specific STA parameters */
typedef struct {
u32 val;
u8 ea[ETH_ALEN];
} scb_val_t;
#endif /* BRCM_FULLMAC */
/* channel encoding */
typedef struct channel_info {
int hw_channel;
int target_channel;
int scan_channel;
} channel_info_t;
/* For ioctls that take a list of MAC addresses */
struct maclist {
uint count; /* number of MAC addresses */
u8 ea[1][ETH_ALEN]; /* variable length array of MAC addresses */
};
#ifdef BRCM_FULLMAC
/* Linux network driver ioctl encoding */
typedef struct wl_ioctl {
uint cmd; /* common ioctl definition */
void *buf; /* pointer to user buffer */
uint len; /* length of user buffer */
u8 set; /* get or set request (optional) */
uint used; /* bytes read or written (optional) */
uint needed; /* bytes needed (optional) */
} wl_ioctl_t;
#endif /* BRCM_FULLMAC */
/*
* Structure for passing hardware and software
* revision info up from the driver.
*/
typedef struct wlc_rev_info {
uint vendorid; /* PCI vendor id */
uint deviceid; /* device id of chip */
uint radiorev; /* radio revision */
uint chiprev; /* chip revision */
uint corerev; /* core revision */
uint boardid; /* board identifier (usu. PCI sub-device id) */
uint boardvendor; /* board vendor (usu. PCI sub-vendor id) */
uint boardrev; /* board revision */
uint driverrev; /* driver version */
uint ucoderev; /* microcode version */
uint bus; /* bus type */
uint chipnum; /* chip number */
uint phytype; /* phy type */
uint phyrev; /* phy revision */
uint anarev; /* anacore rev */
uint chippkg; /* chip package info */
} wlc_rev_info_t;
#define WL_REV_INFO_LEGACY_LENGTH 48
#ifdef BRCM_FULLMAC
#define WLC_IOCTL_SMLEN 256 /* "small" length ioctl buffer required */
#define WLC_IOCTL_MEDLEN 1536 /* "med" length ioctl buffer required */
#define WLC_IOCTL_MAXLEN 8192
#endif
/* common ioctl definitions */
#define WLC_GET_MAGIC 0
#define WLC_GET_VERSION 1
#define WLC_UP 2
#define WLC_DOWN 3
#define WLC_GET_LOOP 4
#define WLC_SET_LOOP 5
#define WLC_DUMP 6
#define WLC_GET_MSGLEVEL 7
#define WLC_SET_MSGLEVEL 8
#define WLC_GET_PROMISC 9
#define WLC_SET_PROMISC 10
#define WLC_OVERLAY_IOCTL 11
#define WLC_GET_RATE 12
/* #define WLC_SET_RATE 13 *//* no longer supported */
#define WLC_GET_INSTANCE 14
/* #define WLC_GET_FRAG 15 *//* no longer supported */
/* #define WLC_SET_FRAG 16 *//* no longer supported */
/* #define WLC_GET_RTS 17 *//* no longer supported */
/* #define WLC_SET_RTS 18 *//* no longer supported */
#define WLC_GET_INFRA 19
#define WLC_SET_INFRA 20
#define WLC_GET_AUTH 21
#define WLC_SET_AUTH 22
#define WLC_GET_BSSID 23
#define WLC_SET_BSSID 24
#define WLC_GET_SSID 25
#define WLC_SET_SSID 26
#define WLC_RESTART 27
/* #define WLC_DUMP_SCB 28 *//* no longer supported */
#define WLC_GET_CHANNEL 29
#define WLC_SET_CHANNEL 30
#define WLC_GET_SRL 31
#define WLC_SET_SRL 32
#define WLC_GET_LRL 33
#define WLC_SET_LRL 34
#define WLC_GET_PLCPHDR 35
#define WLC_SET_PLCPHDR 36
#define WLC_GET_RADIO 37
#define WLC_SET_RADIO 38
#define WLC_GET_PHYTYPE 39
#define WLC_DUMP_RATE 40
#define WLC_SET_RATE_PARAMS 41
#define WLC_GET_FIXRATE 42
#define WLC_SET_FIXRATE 43
/* #define WLC_GET_WEP 42 *//* no longer supported */
/* #define WLC_SET_WEP 43 *//* no longer supported */
#define WLC_GET_KEY 44
#define WLC_SET_KEY 45
#define WLC_GET_REGULATORY 46
#define WLC_SET_REGULATORY 47
#define WLC_GET_PASSIVE_SCAN 48
#define WLC_SET_PASSIVE_SCAN 49
#define WLC_SCAN 50
#define WLC_SCAN_RESULTS 51
#define WLC_DISASSOC 52
#define WLC_REASSOC 53
#define WLC_GET_ROAM_TRIGGER 54
#define WLC_SET_ROAM_TRIGGER 55
#define WLC_GET_ROAM_DELTA 56
#define WLC_SET_ROAM_DELTA 57
#define WLC_GET_ROAM_SCAN_PERIOD 58
#define WLC_SET_ROAM_SCAN_PERIOD 59
#define WLC_EVM 60 /* diag */
#define WLC_GET_TXANT 61
#define WLC_SET_TXANT 62
#define WLC_GET_ANTDIV 63
#define WLC_SET_ANTDIV 64
/* #define WLC_GET_TXPWR 65 *//* no longer supported */
/* #define WLC_SET_TXPWR 66 *//* no longer supported */
#define WLC_GET_CLOSED 67
#define WLC_SET_CLOSED 68
#define WLC_GET_MACLIST 69
#define WLC_SET_MACLIST 70
#define WLC_GET_RATESET 71
#define WLC_SET_RATESET 72
/* #define WLC_GET_LOCALE 73 *//* no longer supported */
#define WLC_LONGTRAIN 74
#define WLC_GET_BCNPRD 75
#define WLC_SET_BCNPRD 76
#define WLC_GET_DTIMPRD 77
#define WLC_SET_DTIMPRD 78
#define WLC_GET_SROM 79
#define WLC_SET_SROM 80
#define WLC_GET_WEP_RESTRICT 81
#define WLC_SET_WEP_RESTRICT 82
#define WLC_GET_COUNTRY 83
#define WLC_SET_COUNTRY 84
#define WLC_GET_PM 85
#define WLC_SET_PM 86
#define WLC_GET_WAKE 87
#define WLC_SET_WAKE 88
/* #define WLC_GET_D11CNTS 89 *//* -> "counters" iovar */
#define WLC_GET_FORCELINK 90 /* ndis only */
#define WLC_SET_FORCELINK 91 /* ndis only */
#define WLC_FREQ_ACCURACY 92 /* diag */
#define WLC_CARRIER_SUPPRESS 93 /* diag */
#define WLC_GET_PHYREG 94
#define WLC_SET_PHYREG 95
#define WLC_GET_RADIOREG 96
#define WLC_SET_RADIOREG 97
#define WLC_GET_REVINFO 98
#define WLC_GET_UCANTDIV 99
#define WLC_SET_UCANTDIV 100
#define WLC_R_REG 101
#define WLC_W_REG 102
/* #define WLC_DIAG_LOOPBACK 103 old tray diag */
/* #define WLC_RESET_D11CNTS 104 *//* -> "reset_d11cnts" iovar */
#define WLC_GET_MACMODE 105
#define WLC_SET_MACMODE 106
#define WLC_GET_MONITOR 107
#define WLC_SET_MONITOR 108
#define WLC_GET_GMODE 109
#define WLC_SET_GMODE 110
#define WLC_GET_LEGACY_ERP 111
#define WLC_SET_LEGACY_ERP 112
#define WLC_GET_RX_ANT 113
#define WLC_GET_CURR_RATESET 114 /* current rateset */
#define WLC_GET_SCANSUPPRESS 115
#define WLC_SET_SCANSUPPRESS 116
#define WLC_GET_AP 117
#define WLC_SET_AP 118
#define WLC_GET_EAP_RESTRICT 119
#define WLC_SET_EAP_RESTRICT 120
#define WLC_SCB_AUTHORIZE 121
#define WLC_SCB_DEAUTHORIZE 122
#define WLC_GET_WDSLIST 123
#define WLC_SET_WDSLIST 124
#define WLC_GET_ATIM 125
#define WLC_SET_ATIM 126
#define WLC_GET_RSSI 127
#define WLC_GET_PHYANTDIV 128
#define WLC_SET_PHYANTDIV 129
#define WLC_AP_RX_ONLY 130
#define WLC_GET_TX_PATH_PWR 131
#define WLC_SET_TX_PATH_PWR 132
#define WLC_GET_WSEC 133
#define WLC_SET_WSEC 134
#define WLC_GET_PHY_NOISE 135
#define WLC_GET_BSS_INFO 136
#define WLC_GET_PKTCNTS 137
#define WLC_GET_LAZYWDS 138
#define WLC_SET_LAZYWDS 139
#define WLC_GET_BANDLIST 140
#define WLC_GET_BAND 141
#define WLC_SET_BAND 142
#define WLC_SCB_DEAUTHENTICATE 143
#define WLC_GET_SHORTSLOT 144
#define WLC_GET_SHORTSLOT_OVERRIDE 145
#define WLC_SET_SHORTSLOT_OVERRIDE 146
#define WLC_GET_SHORTSLOT_RESTRICT 147
#define WLC_SET_SHORTSLOT_RESTRICT 148
#define WLC_GET_GMODE_PROTECTION 149
#define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
#define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
#define WLC_UPGRADE 152
/* #define WLC_GET_MRATE 153 *//* no longer supported */
/* #define WLC_SET_MRATE 154 *//* no longer supported */
#define WLC_GET_IGNORE_BCNS 155
#define WLC_SET_IGNORE_BCNS 156
#define WLC_GET_SCB_TIMEOUT 157
#define WLC_SET_SCB_TIMEOUT 158
#define WLC_GET_ASSOCLIST 159
#define WLC_GET_CLK 160
#define WLC_SET_CLK 161
#define WLC_GET_UP 162
#define WLC_OUT 163
#define WLC_GET_WPA_AUTH 164
#define WLC_SET_WPA_AUTH 165
#define WLC_GET_UCFLAGS 166
#define WLC_SET_UCFLAGS 167
#define WLC_GET_PWRIDX 168
#define WLC_SET_PWRIDX 169
#define WLC_GET_TSSI 170
#define WLC_GET_SUP_RATESET_OVERRIDE 171
#define WLC_SET_SUP_RATESET_OVERRIDE 172
/* #define WLC_SET_FAST_TIMER 173 *//* no longer supported */
/* #define WLC_GET_FAST_TIMER 174 *//* no longer supported */
/* #define WLC_SET_SLOW_TIMER 175 *//* no longer supported */
/* #define WLC_GET_SLOW_TIMER 176 *//* no longer supported */
/* #define WLC_DUMP_PHYREGS 177 *//* no longer supported */
#define WLC_GET_PROTECTION_CONTROL 178
#define WLC_SET_PROTECTION_CONTROL 179
#define WLC_GET_PHYLIST 180
#define WLC_ENCRYPT_STRENGTH 181 /* ndis only */
#define WLC_DECRYPT_STATUS 182 /* ndis only */
#define WLC_GET_KEY_SEQ 183
#define WLC_GET_SCAN_CHANNEL_TIME 184
#define WLC_SET_SCAN_CHANNEL_TIME 185
#define WLC_GET_SCAN_UNASSOC_TIME 186
#define WLC_SET_SCAN_UNASSOC_TIME 187
#define WLC_GET_SCAN_HOME_TIME 188
#define WLC_SET_SCAN_HOME_TIME 189
#define WLC_GET_SCAN_NPROBES 190
#define WLC_SET_SCAN_NPROBES 191
#define WLC_GET_PRB_RESP_TIMEOUT 192
#define WLC_SET_PRB_RESP_TIMEOUT 193
#define WLC_GET_ATTEN 194
#define WLC_SET_ATTEN 195
#define WLC_GET_SHMEM 196 /* diag */
#define WLC_SET_SHMEM 197 /* diag */
/* #define WLC_GET_GMODE_PROTECTION_CTS 198 *//* no longer supported */
/* #define WLC_SET_GMODE_PROTECTION_CTS 199 *//* no longer supported */
#define WLC_SET_WSEC_TEST 200
#define WLC_SCB_DEAUTHENTICATE_FOR_REASON 201
#define WLC_TKIP_COUNTERMEASURES 202
#define WLC_GET_PIOMODE 203
#define WLC_SET_PIOMODE 204
#define WLC_SET_ASSOC_PREFER 205
#define WLC_GET_ASSOC_PREFER 206
#define WLC_SET_ROAM_PREFER 207
#define WLC_GET_ROAM_PREFER 208
#define WLC_SET_LED 209
#define WLC_GET_LED 210
#define WLC_RESERVED6 211
#define WLC_RESERVED7 212
#define WLC_GET_CHANNEL_QA 213
#define WLC_START_CHANNEL_QA 214
#define WLC_GET_CHANNEL_SEL 215
#define WLC_START_CHANNEL_SEL 216
#define WLC_GET_VALID_CHANNELS 217
#define WLC_GET_FAKEFRAG 218
#define WLC_SET_FAKEFRAG 219
#define WLC_GET_PWROUT_PERCENTAGE 220
#define WLC_SET_PWROUT_PERCENTAGE 221
#define WLC_SET_BAD_FRAME_PREEMPT 222
#define WLC_GET_BAD_FRAME_PREEMPT 223
#define WLC_SET_LEAP_LIST 224
#define WLC_GET_LEAP_LIST 225
#define WLC_GET_CWMIN 226
#define WLC_SET_CWMIN 227
#define WLC_GET_CWMAX 228
#define WLC_SET_CWMAX 229
#define WLC_GET_WET 230
#define WLC_SET_WET 231
#define WLC_GET_PUB 232
/* #define WLC_SET_GLACIAL_TIMER 233 *//* no longer supported */
/* #define WLC_GET_GLACIAL_TIMER 234 *//* no longer supported */
#define WLC_GET_KEY_PRIMARY 235
#define WLC_SET_KEY_PRIMARY 236
/* #define WLC_DUMP_RADIOREGS 237 *//* no longer supported */
#define WLC_RESERVED4 238
#define WLC_RESERVED5 239
#define WLC_UNSET_CALLBACK 240
#define WLC_SET_CALLBACK 241
#define WLC_GET_RADAR 242
#define WLC_SET_RADAR 243
#define WLC_SET_SPECT_MANAGMENT 244
#define WLC_GET_SPECT_MANAGMENT 245
#define WLC_WDS_GET_REMOTE_HWADDR 246 /* handled in wl_linux.c/wl_vx.c */
#define WLC_WDS_GET_WPA_SUP 247
#define WLC_SET_CS_SCAN_TIMER 248
#define WLC_GET_CS_SCAN_TIMER 249
#define WLC_MEASURE_REQUEST 250
#define WLC_INIT 251
#define WLC_SEND_QUIET 252
#define WLC_KEEPALIVE 253
#define WLC_SEND_PWR_CONSTRAINT 254
#define WLC_UPGRADE_STATUS 255
#define WLC_CURRENT_PWR 256
#define WLC_GET_SCAN_PASSIVE_TIME 257
#define WLC_SET_SCAN_PASSIVE_TIME 258
#define WLC_LEGACY_LINK_BEHAVIOR 259
#define WLC_GET_CHANNELS_IN_COUNTRY 260
#define WLC_GET_COUNTRY_LIST 261
#define WLC_GET_VAR 262 /* get value of named variable */
#define WLC_SET_VAR 263 /* set named variable to value */
#define WLC_NVRAM_GET 264 /* deprecated */
#define WLC_NVRAM_SET 265
#define WLC_NVRAM_DUMP 266
#define WLC_REBOOT 267
#define WLC_SET_WSEC_PMK 268
#define WLC_GET_AUTH_MODE 269
#define WLC_SET_AUTH_MODE 270
#define WLC_GET_WAKEENTRY 271
#define WLC_SET_WAKEENTRY 272
#define WLC_NDCONFIG_ITEM 273 /* currently handled in wl_oid.c */
#define WLC_NVOTPW 274
#define WLC_OTPW 275
#define WLC_IOV_BLOCK_GET 276
#define WLC_IOV_MODULES_GET 277
#define WLC_SOFT_RESET 278
#define WLC_GET_ALLOW_MODE 279
#define WLC_SET_ALLOW_MODE 280
#define WLC_GET_DESIRED_BSSID 281
#define WLC_SET_DESIRED_BSSID 282
#define WLC_DISASSOC_MYAP 283
#define WLC_GET_RESERVED10 284
#define WLC_GET_RESERVED11 285
#define WLC_GET_RESERVED12 286
#define WLC_GET_RESERVED13 287
#define WLC_GET_RESERVED14 288
#define WLC_SET_RESERVED15 289
#define WLC_SET_RESERVED16 290
#define WLC_GET_RESERVED17 291
#define WLC_GET_RESERVED18 292
#define WLC_GET_RESERVED19 293
#define WLC_SET_RESERVED1A 294
#define WLC_GET_RESERVED1B 295
#define WLC_GET_RESERVED1C 296
#define WLC_GET_RESERVED1D 297
#define WLC_SET_RESERVED1E 298
#define WLC_GET_RESERVED1F 299
#define WLC_GET_RESERVED20 300
#define WLC_GET_RESERVED21 301
#define WLC_GET_RESERVED22 302
#define WLC_GET_RESERVED23 303
#define WLC_GET_RESERVED24 304
#define WLC_SET_RESERVED25 305
#define WLC_GET_RESERVED26 306
#define WLC_NPHY_SAMPLE_COLLECT 307 /* Nphy sample collect mode */
#define WLC_UM_PRIV 308 /* for usermode driver private ioctl */
#define WLC_GET_CMD 309
/* #define WLC_LAST 310 *//* Never used - can be reused */
#define WLC_RESERVED8 311
#define WLC_RESERVED9 312
#define WLC_RESERVED1 313
#define WLC_RESERVED2 314
#define WLC_RESERVED3 315
#define WLC_LAST 316
#ifndef EPICTRL_COOKIE
#define EPICTRL_COOKIE 0xABADCEDE
#endif
#define WL_DECRYPT_STATUS_SUCCESS 1
#define WL_DECRYPT_STATUS_FAILURE 2
#define WL_DECRYPT_STATUS_UNKNOWN 3
/* allows user-mode app to poll the status of USB image upgrade */
#define WLC_UPGRADE_SUCCESS 0
#define WLC_UPGRADE_PENDING 1
/* WLC_GET_AUTH, WLC_SET_AUTH values */
#define WL_AUTH_OPEN_SYSTEM 0 /* d11 open authentication */
#define WL_AUTH_SHARED_KEY 1 /* d11 shared authentication */
#define WL_AUTH_OPEN_SHARED 2 /* try open, then shared if open failed w/rc 13 */
/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
#define WL_RADIO_SW_DISABLE (1<<0)
#define WL_RADIO_HW_DISABLE (1<<1)
#define WL_RADIO_MPC_DISABLE (1<<2)
#define WL_RADIO_COUNTRY_DISABLE (1<<3) /* some countries don't support any channel */
#define WL_SPURAVOID_OFF 0
#define WL_SPURAVOID_ON1 1
#define WL_SPURAVOID_ON2 2
/* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
#define WL_TXPWR_OVERRIDE (1U<<31)
#define WL_PHY_PAVARS_LEN 6 /* Phy type, Band range, chain, a1, b0, b1 */
typedef struct wl_po {
u16 phy_type; /* Phy type */
u16 band;
u16 cckpo;
u32 ofdmpo;
u16 mcspo[8];
} wl_po_t;
/* a large TX Power as an init value to factor out of min() calculations,
* keep low enough to fit in an s8, units are .25 dBm
*/
#define WLC_TXPWR_MAX (127) /* ~32 dBm = 1,500 mW */
/* "diag" iovar argument and error code */
#define WL_DIAG_INTERRUPT 1 /* d11 loopback interrupt test */
#define WL_DIAG_LOOPBACK 2 /* d11 loopback data test */
#define WL_DIAG_MEMORY 3 /* d11 memory test */
#define WL_DIAG_LED 4 /* LED test */
#define WL_DIAG_REG 5 /* d11/phy register test */
#define WL_DIAG_SROM 6 /* srom read/crc test */
#define WL_DIAG_DMA 7 /* DMA test */
#define WL_DIAGERR_SUCCESS 0
#define WL_DIAGERR_FAIL_TO_RUN 1 /* unable to run requested diag */
#define WL_DIAGERR_NOT_SUPPORTED 2 /* diag requested is not supported */
#define WL_DIAGERR_INTERRUPT_FAIL 3 /* loopback interrupt test failed */
#define WL_DIAGERR_LOOPBACK_FAIL 4 /* loopback data test failed */
#define WL_DIAGERR_SROM_FAIL 5 /* srom read failed */
#define WL_DIAGERR_SROM_BADCRC 6 /* srom crc failed */
#define WL_DIAGERR_REG_FAIL 7 /* d11/phy register test failed */
#define WL_DIAGERR_MEMORY_FAIL 8 /* d11 memory test failed */
#define WL_DIAGERR_NOMEM 9 /* diag test failed due to no memory */
#define WL_DIAGERR_DMA_FAIL 10 /* DMA test failed */
#define WL_DIAGERR_MEMORY_TIMEOUT 11 /* d11 memory test didn't finish in time */
#define WL_DIAGERR_MEMORY_BADPATTERN 12 /* d11 memory test result in bad pattern */
/* band types */
#define WLC_BAND_AUTO 0 /* auto-select */
#define WLC_BAND_5G 1 /* 5 Ghz */
#define WLC_BAND_2G 2 /* 2.4 Ghz */
#define WLC_BAND_ALL 3 /* all bands */
/* band range returned by band_range iovar */
#define WL_CHAN_FREQ_RANGE_2G 0
#define WL_CHAN_FREQ_RANGE_5GL 1
#define WL_CHAN_FREQ_RANGE_5GM 2
#define WL_CHAN_FREQ_RANGE_5GH 3
/* phy types (returned by WLC_GET_PHYTPE) */
#define WLC_PHY_TYPE_A 0
#define WLC_PHY_TYPE_B 1
#define WLC_PHY_TYPE_G 2
#define WLC_PHY_TYPE_N 4
#define WLC_PHY_TYPE_LP 5
#define WLC_PHY_TYPE_SSN 6
#define WLC_PHY_TYPE_HT 7
#define WLC_PHY_TYPE_LCN 8
#define WLC_PHY_TYPE_NULL 0xf
/* MAC list modes */
#define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
#define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
#define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
/*
* 54g modes (basic bits may still be overridden)
*
* GMODE_LEGACY_B Rateset: 1b, 2b, 5.5, 11
* Preamble: Long
* Shortslot: Off
* GMODE_AUTO Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
* Extended Rateset: 6, 9, 12, 48
* Preamble: Long
* Shortslot: Auto
* GMODE_ONLY Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54
* Extended Rateset: 6b, 9, 12b, 48
* Preamble: Short required
* Shortslot: Auto
* GMODE_B_DEFERRED Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
* Extended Rateset: 6, 9, 12, 48
* Preamble: Long
* Shortslot: On
* GMODE_PERFORMANCE Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54
* Preamble: Short required
* Shortslot: On and required
* GMODE_LRS Rateset: 1b, 2b, 5.5b, 11b
* Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54
* Preamble: Long
* Shortslot: Auto
*/
#define GMODE_LEGACY_B 0
#define GMODE_AUTO 1
#define GMODE_ONLY 2
#define GMODE_B_DEFERRED 3
#define GMODE_PERFORMANCE 4
#define GMODE_LRS 5
#define GMODE_MAX 6
/* values for PLCPHdr_override */
#define WLC_PLCP_AUTO -1
#define WLC_PLCP_SHORT 0
#define WLC_PLCP_LONG 1
/* values for g_protection_override and n_protection_override */
#define WLC_PROTECTION_AUTO -1
#define WLC_PROTECTION_OFF 0
#define WLC_PROTECTION_ON 1
#define WLC_PROTECTION_MMHDR_ONLY 2
#define WLC_PROTECTION_CTS_ONLY 3
/* values for g_protection_control and n_protection_control */
#define WLC_PROTECTION_CTL_OFF 0
#define WLC_PROTECTION_CTL_LOCAL 1
#define WLC_PROTECTION_CTL_OVERLAP 2
/* values for n_protection */
#define WLC_N_PROTECTION_OFF 0
#define WLC_N_PROTECTION_OPTIONAL 1
#define WLC_N_PROTECTION_20IN40 2
#define WLC_N_PROTECTION_MIXEDMODE 3
/* values for n_preamble_type */
#define WLC_N_PREAMBLE_MIXEDMODE 0
#define WLC_N_PREAMBLE_GF 1
#define WLC_N_PREAMBLE_GF_BRCM 2
/* values for band specific 40MHz capabilities */
#define WLC_N_BW_20ALL 0
#define WLC_N_BW_40ALL 1
#define WLC_N_BW_20IN2G_40IN5G 2
/* values to force tx/rx chain */
#define WLC_N_TXRX_CHAIN0 0
#define WLC_N_TXRX_CHAIN1 1
/* bitflags for SGI support (sgi_rx iovar) */
#define WLC_N_SGI_20 0x01
#define WLC_N_SGI_40 0x02
/* Values for PM */
#define PM_OFF 0
#define PM_MAX 1
/* interference mitigation options */
#define INTERFERE_OVRRIDE_OFF -1 /* interference override off */
#define INTERFERE_NONE 0 /* off */
#define NON_WLAN 1 /* foreign/non 802.11 interference, no auto detect */
#define WLAN_MANUAL 2 /* ACI: no auto detection */
#define WLAN_AUTO 3 /* ACI: auto detect */
#define WLAN_AUTO_W_NOISE 4 /* ACI: auto - detect and non 802.11 interference */
#define AUTO_ACTIVE (1 << 7) /* Auto is currently active */
#define WL_RSSI_ANT_VERSION 1 /* current version of wl_rssi_ant_t */
#define WL_ANT_RX_MAX 2 /* max 2 receive antennas */
#define WL_ANT_HT_RX_MAX 3 /* max 3 receive antennas/cores */
#define WL_ANT_IDX_1 0 /* antenna index 1 */
#define WL_ANT_IDX_2 1 /* antenna index 2 */
#ifndef WL_RSSI_ANT_MAX
#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */
#elif WL_RSSI_ANT_MAX != 4
#error "WL_RSSI_ANT_MAX does not match"
#endif
/* RSSI per antenna */
typedef struct {
u32 version; /* version field */
u32 count; /* number of valid antenna rssi */
s8 rssi_ant[WL_RSSI_ANT_MAX]; /* rssi per antenna */
} wl_rssi_ant_t;
#define NUM_PWRCTRL_RATES 12
typedef struct {
u8 txpwr_band_max[NUM_PWRCTRL_RATES]; /* User set target */
u8 txpwr_limit[NUM_PWRCTRL_RATES]; /* reg and local power limit */
u8 txpwr_local_max; /* local max according to the AP */
u8 txpwr_local_constraint; /* local constraint according to the AP */
u8 txpwr_chan_reg_max; /* Regulatory max for this channel */
u8 txpwr_target[2][NUM_PWRCTRL_RATES]; /* Latest target for 2.4 and 5 Ghz */
u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */
u8 txpwr_opo[NUM_PWRCTRL_RATES]; /* On G phy, OFDM power offset */
u8 txpwr_bphy_cck_max[NUM_PWRCTRL_RATES]; /* Max CCK power for this band (SROM) */
u8 txpwr_bphy_ofdm_max; /* Max OFDM power for this band (SROM) */
u8 txpwr_aphy_max[NUM_PWRCTRL_RATES]; /* Max power for A band (SROM) */
s8 txpwr_antgain[2]; /* Ant gain for each band - from SROM */
u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */
} tx_power_legacy_t;
#define WL_TX_POWER_RATES_LEGACY 45
#define WL_TX_POWER_MCS20_FIRST 12
#define WL_TX_POWER_MCS20_NUM 16
#define WL_TX_POWER_MCS40_FIRST 28
#define WL_TX_POWER_MCS40_NUM 17
#define WL_TX_POWER_RATES 101
#define WL_TX_POWER_CCK_FIRST 0
#define WL_TX_POWER_CCK_NUM 4
#define WL_TX_POWER_OFDM_FIRST 4 /* Index for first 20MHz OFDM SISO rate */
#define WL_TX_POWER_OFDM20_CDD_FIRST 12 /* Index for first 20MHz OFDM CDD rate */
#define WL_TX_POWER_OFDM40_SISO_FIRST 52 /* Index for first 40MHz OFDM SISO rate */
#define WL_TX_POWER_OFDM40_CDD_FIRST 60 /* Index for first 40MHz OFDM CDD rate */
#define WL_TX_POWER_OFDM_NUM 8
#define WL_TX_POWER_MCS20_SISO_FIRST 20 /* Index for first 20MHz MCS SISO rate */
#define WL_TX_POWER_MCS20_CDD_FIRST 28 /* Index for first 20MHz MCS CDD rate */
#define WL_TX_POWER_MCS20_STBC_FIRST 36 /* Index for first 20MHz MCS STBC rate */
#define WL_TX_POWER_MCS20_SDM_FIRST 44 /* Index for first 20MHz MCS SDM rate */
#define WL_TX_POWER_MCS40_SISO_FIRST 68 /* Index for first 40MHz MCS SISO rate */
#define WL_TX_POWER_MCS40_CDD_FIRST 76 /* Index for first 40MHz MCS CDD rate */
#define WL_TX_POWER_MCS40_STBC_FIRST 84 /* Index for first 40MHz MCS STBC rate */
#define WL_TX_POWER_MCS40_SDM_FIRST 92 /* Index for first 40MHz MCS SDM rate */
#define WL_TX_POWER_MCS_1_STREAM_NUM 8
#define WL_TX_POWER_MCS_2_STREAM_NUM 8
#define WL_TX_POWER_MCS_32 100 /* Index for 40MHz rate MCS 32 */
#define WL_TX_POWER_MCS_32_NUM 1
/* sslpnphy specifics */
#define WL_TX_POWER_MCS20_SISO_FIRST_SSN 12 /* Index for first 20MHz MCS SISO rate */
/* tx_power_t.flags bits */
#define WL_TX_POWER_F_ENABLED 1
#define WL_TX_POWER_F_HW 2
#define WL_TX_POWER_F_MIMO 4
#define WL_TX_POWER_F_SISO 8
typedef struct {
u32 flags;
chanspec_t chanspec; /* txpwr report for this channel */
chanspec_t local_chanspec; /* channel on which we are associated */
u8 local_max; /* local max according to the AP */
u8 local_constraint; /* local constraint according to the AP */
s8 antgain[2]; /* Ant gain for each band - from SROM */
u8 rf_cores; /* count of RF Cores being reported */
u8 est_Pout[4]; /* Latest tx power out estimate per RF chain */
u8 est_Pout_act[4]; /* Latest tx power out estimate per RF chain
* without adjustment
*/
u8 est_Pout_cck; /* Latest CCK tx power out estimate */
u8 tx_power_max[4]; /* Maximum target power among all rates */
u8 tx_power_max_rate_ind[4]; /* Index of the rate with the max target power */
u8 user_limit[WL_TX_POWER_RATES]; /* User limit */
u8 reg_limit[WL_TX_POWER_RATES]; /* Regulatory power limit */
u8 board_limit[WL_TX_POWER_RATES]; /* Max power board can support (SROM) */
u8 target[WL_TX_POWER_RATES]; /* Latest target power */
} tx_power_t;
typedef struct tx_inst_power {
u8 txpwr_est_Pout[2]; /* Latest estimate for 2.4 and 5 Ghz */
u8 txpwr_est_Pout_gofdm; /* Pwr estimate for 2.4 OFDM */
} tx_inst_power_t;
/* Message levels */
#define WL_ERROR_VAL 0x00000001
#define WL_TRACE_VAL 0x00000002
/* maximum channels returned by the get valid channels iovar */
#define WL_NUMCHANNELS 64
#define WL_NUMCHANSPECS 100
struct tsinfo_arg {
u8 octets[3];
};
#define NFIFO 6 /* # tx/rx fifopairs */
struct wl_msglevel2 {
u32 low;
u32 high;
};
/* structure for per-tid ampdu control */
struct ampdu_tid_control {
u8 tid; /* tid */
u8 enable; /* enable/disable */
};
/* structure for identifying ea/tid for sending addba/delba */
struct ampdu_ea_tid {
u8 ea[ETH_ALEN]; /* Station address */
u8 tid; /* tid */
};
/* structure for identifying retry/tid for retry_limit_tid/rr_retry_limit_tid */
struct ampdu_retry_tid {
u8 tid; /* tid */
u8 retry; /* retry value */
};
/* Software feature flag defines used by wlfeatureflag */
#define WL_SWFL_NOHWRADIO 0x0004
#define WL_SWFL_FLOWCONTROL 0x0008 /* Enable backpressure to OS stack */
#define WL_SWFL_WLBSSSORT 0x0010 /* Per-port supports sorting of BSS */
#define WL_LIFETIME_MAX 0xFFFF /* Max value in ms */
/* Pattern matching filter. Specifies an offset within received packets to
* start matching, the pattern to match, the size of the pattern, and a bitmask
* that indicates which bits within the pattern should be matched.
*/
typedef struct wl_pkt_filter_pattern {
u32 offset; /* Offset within received packet to start pattern matching.
* Offset '0' is the first byte of the ethernet header.
*/
u32 size_bytes; /* Size of the pattern. Bitmask must be the same size. */
u8 mask_and_pattern[1]; /* Variable length mask and pattern data. mask starts
* at offset 0. Pattern immediately follows mask.
*/
} wl_pkt_filter_pattern_t;
/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
typedef struct wl_pkt_filter {
u32 id; /* Unique filter id, specified by app. */
u32 type; /* Filter type (WL_PKT_FILTER_TYPE_xxx). */
u32 negate_match; /* Negate the result of filter matches */
union { /* Filter definitions */
wl_pkt_filter_pattern_t pattern; /* Pattern matching filter */
} u;
} wl_pkt_filter_t;
#define WL_PKT_FILTER_FIXED_LEN offsetof(wl_pkt_filter_t, u)
#define WL_PKT_FILTER_PATTERN_FIXED_LEN offsetof(wl_pkt_filter_pattern_t, mask_and_pattern)
/* IOVAR "pkt_filter_enable" parameter. */
typedef struct wl_pkt_filter_enable {
u32 id; /* Unique filter id */
u32 enable; /* Enable/disable bool */
} wl_pkt_filter_enable_t;
#define WLC_RSSI_INVALID 0 /* invalid RSSI value */
/* n-mode support capability */
/* 2x2 includes both 1x1 & 2x2 devices
* reserved #define 2 for future when we want to separate 1x1 & 2x2 and
* control it independently
*/
#define WL_11N_2x2 1
#define WL_11N_3x3 3
#define WL_11N_4x4 4
/* define 11n feature disable flags */
#define WLFEATURE_DISABLE_11N 0x00000001
#define WLFEATURE_DISABLE_11N_STBC_TX 0x00000002
#define WLFEATURE_DISABLE_11N_STBC_RX 0x00000004
#define WLFEATURE_DISABLE_11N_SGI_TX 0x00000008
#define WLFEATURE_DISABLE_11N_SGI_RX 0x00000010
#define WLFEATURE_DISABLE_11N_AMPDU_TX 0x00000020
#define WLFEATURE_DISABLE_11N_AMPDU_RX 0x00000040
#define WLFEATURE_DISABLE_11N_GF 0x00000080
#define WL_EVENTING_MASK_LEN 16
#define TOE_TX_CSUM_OL 0x00000001
#define TOE_RX_CSUM_OL 0x00000002
#define PM_OFF 0
#define PM_MAX 1
#define PM_FAST 2
typedef enum sup_auth_status {
WLC_SUP_DISCONNECTED = 0,
WLC_SUP_CONNECTING,
WLC_SUP_IDREQUIRED,
WLC_SUP_AUTHENTICATING,
WLC_SUP_AUTHENTICATED,
WLC_SUP_KEYXCHANGE,
WLC_SUP_KEYED,
WLC_SUP_TIMEOUT,
WLC_SUP_LAST_BASIC_STATE,
WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED,
WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE,
WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE,
WLC_SUP_KEYXCHANGE_PREP_M4,
WLC_SUP_KEYXCHANGE_WAIT_G1,
WLC_SUP_KEYXCHANGE_PREP_G2
} sup_auth_status_t;
#endif /* _wlioctl_h_ */