hcfdef.h - Android社区 - https://www.androidos.net.cn/

Kernel | 3.0

下载查看原文件

//   vim:tw=110:ts=4:
#ifndef HCFDEFC_H
#define HCFDEFC_H 1

/*************************************************************************************************
*
* FILE	 : HCFDEF.H
*
* DATE   : $Date: 2004/08/05 11:47:10 $   $Revision: 1.8 $
* Original: 2004/05/28 14:05:35    Revision: 1.59      Tag: hcf7_t20040602_01
* Original: 2004/05/13 15:31:45    Revision: 1.53      Tag: hcf7_t7_20040513_01
* Original: 2004/04/15 09:24:42    Revision: 1.44      Tag: hcf7_t7_20040415_01
* Original: 2004/04/13 14:22:45    Revision: 1.43      Tag: t7_20040413_01
* Original: 2004/04/01 15:32:55    Revision: 1.40      Tag: t7_20040401_01
* Original: 2004/03/10 15:39:28    Revision: 1.36      Tag: t20040310_01
* Original: 2004/03/03 14:10:12    Revision: 1.34      Tag: t20040304_01
* Original: 2004/03/02 09:27:12    Revision: 1.32      Tag: t20040302_03
* Original: 2004/02/24 13:00:29    Revision: 1.29      Tag: t20040224_01
* Original: 2004/02/18 17:13:57    Revision: 1.26      Tag: t20040219_01
*
* AUTHOR : Nico Valster
*
* SPECIFICATION: ...........
*
* DESC   : Definitions and Prototypes for HCF only
*
**************************************************************************************************
*
*
* SOFTWARE LICENSE
*
* This software is provided subject to the following terms and conditions,
* which you should read carefully before using the software.  Using this
* software indicates your acceptance of these terms and conditions.  If you do
* not agree with these terms and conditions, do not use the software.
*
* COPYRIGHT � 1994 - 1995	by AT&T.				All Rights Reserved
* COPYRIGHT � 1996 - 2000 by Lucent Technologies.	All Rights Reserved
* COPYRIGHT � 2001 - 2004	by Agere Systems Inc.	All Rights Reserved
* All rights reserved.
*
* Redistribution and use in source or binary forms, with or without
* modifications, are permitted provided that the following conditions are met:
*
* . Redistributions of source code must retain the above copyright notice, this
*    list of conditions and the following Disclaimer as comments in the code as
*    well as in the documentation and/or other materials provided with the
*    distribution.
*
* . Redistributions in binary form must reproduce the above copyright notice,
*    this list of conditions and the following Disclaimer in the documentation
*    and/or other materials provided with the distribution.
*
* . Neither the name of Agere Systems Inc. nor the names of the contributors
*    may be used to endorse or promote products derived from this software
*    without specific prior written permission.
*
* Disclaimer
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, INFRINGEMENT AND THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  ANY
* USE, MODIFICATION OR DISTRIBUTION OF THIS SOFTWARE IS SOLELY AT THE USERS OWN
* RISK. IN NO EVENT SHALL AGERE SYSTEMS INC. OR CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, INCLUDING, BUT NOT LIMITED TO, CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*
*************************************************************************************************/

/************************************************************************************************/
/*********************************  P R E F I X E S  ********************************************/
/************************************************************************************************/
//IFB_		Interface Block
//HCMD_		Hermes Command
//HFS_		Hermes (Transmit/Receive) Frame Structure
//HREG_		Hermes Register

/*************************************************************************************************/

#if 0 //
#define BIT0  0x0001
#define BIT1  0x0002
#define BIT2  0x0004
#define BIT3  0x0008
#define BIT4  0x0010
#define BIT5  0x0020
#define BIT6  0x0040
#define BIT7  0x0080
#define BIT8  0x0100
#define BIT9  0x0200
#define BIT10 0x0400
#define BIT11 0x0800
#define BIT12 0x1000
#define BIT13 0x2000
#define BIT14 0x4000
#define BIT15 0x8000
#define BIT16 0x00010000
#define BIT17 0x00020000
#define BIT18 0x00040000
#define BIT19 0x00080000
#define BIT20 0x00100000
#define BIT21 0x00200000
#define BIT22 0x00400000
#define BIT23 0x00800000
#define BIT24 0x01000000
#define BIT25 0x02000000
#define BIT26 0x04000000
#define BIT27 0x08000000
#define BIT28 0x10000000
#define BIT29 0x20000000
#define BIT30 0x40000000
#define BIT31 0x80000000
#endif // 0

/************************************************************************************************/
/********************************* GENERAL EQUATES **********************************************/
/************************************************************************************************/

#define HCF_MAGIC				0x7D37	// "}7" Handle validation

#define	PLUG_DATA_OFFSET        0x00000800	//needed by some test tool on top of H-II NDIS driver

#define INI_TICK_INI			0x00040000L

#define IO_IN					0		//hcfio_in_string
#define IO_OUT					1		//hcfio_out_string

//DO_ASSERT, create an artificial FALSE to force an ASSERT without the nasty compiler warning
#define DO_ASSERT				( assert_ifbp->IFB_Magic != HCF_MAGIC && assert_ifbp->IFB_Magic == HCF_MAGIC )
#define NT_ASSERT				0x0000		//, NEVER_TESTED
#define NEVER_TESTED			MERGE_2( 0xEFFE, 0xFEEF )
#define SE_ASSERT				0x5EFF		/* Side Effect, HCFASSERT invokation which are only called for the
											 * side effect and which should never trigger */
#define DHF_FILE_NAME_OFFSET	10000		//to distinguish DHF from HCF asserts by means of line number
#define MMD_FILE_NAME_OFFSET	20000		//to distinguish MMD from HCF asserts by means of line number

// trace codes used to
// 1: profile execution times via HCF_TRACE and HCF_TRACE_VALUE
// 2: hierarchical flow information via HCFLOGENTRY / HCFLOGEXIT

//#define HCF_TRACE_CONNECT		useless
//#define HCF_TRACE_DISCONNECT	useless
#define HCF_TRACE_ACTION		0x0000  // 0x0001
#define HCF_TRACE_CNTL			0x0001  // 0x0002
#define HCF_TRACE_DMA_RX_GET	0x0002  // 0x0004
#define HCF_TRACE_DMA_RX_PUT	0x0003  // 0x0008
#define HCF_TRACE_DMA_TX_GET	0x0004  // 0x0010
#define HCF_TRACE_DMA_TX_PUT	0x0005  // 0x0020
#define HCF_TRACE_GET_INFO		0x0006  // 0x0040
#define HCF_TRACE_PUT_INFO		0x0007  // 0x0080
#define HCF_TRACE_RCV_MSG		0x0008  // 0x0100
#define HCF_TRACE_SEND_MSG		0x0009  // 0x0200
#define HCF_TRACE_SERVICE_NIC	0x000A  // 0x0400
// #define HCF_TRACE_           0x000C  // 0x1000
// #define HCF_TRACE_           0x000D  // 0x2000
// #define HCF_TRACE_           0x000E  // 0x4000
// #define HCF_TRACE_           0x000F  // 0x8000
//	============================================ HCF_TRACE_... codes below 0x0010 are asserted on re-entry
#define HCF_TRACE_ACTION_KLUDGE	0x0010  /* once you start introducing kludges there is no end to it
										 * this is an escape to do not assert on re-entrancy problem caused
										 * by HCF_ACT_INT_FORCE_ON used to get Microsofts NDIS drivers going
										 */
#define HCF_TRACE_STRIO			0x0020
#define HCF_TRACE_ALLOC			0X0021
#define HCF_TRACE_DL			0X0023
#define HCF_TRACE_ISR_INFO		0X0024
#define HCF_TRACE_CALIBRATE		0x0026

#define HCF_TRACE_CMD_CPL 		0x0040
#define HCF_TRACE_CMD_EXE		0x0041
#define HCF_TRACE_GET_FID		0x0042
#define HCF_TRACE_GET_FRAG		0x0043
#define HCF_TRACE_INIT			0x0044
#define HCF_TRACE_PUT_FRAG		0x0045
#define HCF_TRACE_SETUP_BAP		0x0046

#define	HCF_TRACE_EXIT 			0x8000	// Keil C warns "long constant truncated to int"

//#define BAP_0					HREG_DATA_0		//Used by DMA controller to access NIC RAM
#define BAP_1					HREG_DATA_1		//Used by HCF to access NIC RAM

//************************* Hermes Receive/Transmit Frame Structures
//HFS_STAT
//see MMD.H for HFS_STAT_ERR
#define 	HFS_STAT_MSG_TYPE	0xE000	//Hermes reported Message Type
#define 	HFS_STAT_MIC_KEY_ID	0x1800	//MIC key used (if any)
#define 	HFS_STAT_1042		0x2000	//RFC1042 Encoded
#define 	HFS_STAT_TUNNEL		0x4000	//Bridge-Tunnel Encoded
#define 	HFS_STAT_WMP_MSG	0x6000	//WaveLAN-II Management Protocol Frame
#if (HCF_TYPE) & HCF_TYPE_WPA
#define 	HFS_STAT_MIC		0x0010	//Frame contains MIC  //;? re-instate when F/W ready
#endif

//************************* Hermes Register Offsets and Command bits
#define HREG_IO_RANGE			0x80		//I/O Range used by Hermes

//************************* Command/Status
#define HREG_CMD				0x00		//
#define 	HCMD_CMD_CODE			0x3F
#define HREG_PARAM_0			0x02		//
#define HREG_PARAM_1			0x04		//
#define HREG_PARAM_2			0x06		//
#define HREG_STAT				0x08		//
#define 	HREG_STAT_CMD_CODE		0x003F	//
#define		HREG_STAT_DIAG_ERR		0x0100
#define		HREG_STAT_INQUIRE_ERR	0x0500
#define 	HREG_STAT_CMD_RESULT	0x7F00	//
#define HREG_RESP_0				0x0A		//
#define HREG_RESP_1				0x0C		//
#define HREG_RESP_2				0x0E		//

//************************* FID Management
#define HREG_INFO_FID			0x10		//
#define HREG_RX_FID				0x20		//
#define HREG_ALLOC_FID  		0x22		//
#define HREG_TX_COMPL_FID  		0x24		//

//************************* BAP
//20031030 HWi Inserted this again because the dongle code uses this (GPIF.C)
//#define HREG_SELECT_0			0x18		//
//#define HREG_OFFSET_0			0x1C		//
//#define HREG_DATA_0			0x36		//

//#define 	HREG_OFFSET_BUSY		0x8000	// use HCMD_BUSY
#define 	HREG_OFFSET_ERR			0x4000	//
//rsrvd #define 	HREG_OFFSET_DATA_OFFSET	0x0FFF	//

#define HREG_SELECT_1			0x1A		//
#define HREG_OFFSET_1			0x1E		//
#define HREG_DATA_1				0x38		//

//************************* Event
#define HREG_EV_STAT			0x30		//
#define HREG_INT_EN				0x32		//
#define HREG_EV_ACK				0x34		//

#define    HREG_EV_TICK				0x8000	//Auxiliary Timer Tick
//#define  HREG_EV_RES				0x4000	//H-I only: H/W error (Wait Time-out)
#define    HREG_EV_INFO_DROP		0x2000	//WMAC did not have sufficient RAM to build Unsollicited Frame
#if (HCF_TYPE) & HCF_TYPE_HII5
#define    HREG_EV_ACK_REG_READY	0x0000
#else
#define    HREG_EV_ACK_REG_READY	0x1000	//Workaround Kludge bit for H-II (not H-II.5)
#endif // HCF_TYPE_HII5
#if (HCF_SLEEP) & ( HCF_CDS | HCF_DDS )
#define    HREG_EV_SLEEP_REQ		0x0800
#else
#define    HREG_EV_SLEEP_REQ		0x0000
#endif // HCF_CDS / HCF_DDS
#if HCF_DMA
//#define    HREG_EV_LPESC			0x0400 // firmware sets this bit and clears it, not for host usage.
#define    HREG_EV_RDMAD			0x0200 // rx frame in host memory
#define    HREG_EV_TDMAD			0x0100 // tx frame in host memory processed
//#define    HREG_EV_RXDMA			0x0040 // firmware kicks off DMA engine (bit is not for host usage)
//#define    HREG_EV_TXDMA			0x0020 // firmware kicks off DMA engine (bit is not for host usage)
#define    HREG_EV_FW_DMA			0x0460 // firmware / DMA engine I/F (bits are not for host usage)
#else
#define    HREG_EV_FW_DMA			0x0000
#endif // HCF_DMA
#define    HREG_EV_INFO				0x0080	// Asynchronous Information Frame
#define    HREG_EV_CMD				0x0010	// Command completed, Status and Response available
#define    HREG_EV_ALLOC			0x0008	// Asynchronous part of Allocation/Reclaim completed
#define    HREG_EV_TX_EXC			0x0004	// Asynchronous Transmission unsuccessful completed
#define    HREG_EV_TX				0x0002	// Asynchronous Transmission successful completed
#define    HREG_EV_RX				0x0001	// Asynchronous Receive Frame

#define    HREG_EV_TX_EXT 			( (HCF_EXT) & (HCF_EXT_INT_TX_EX | HCF_EXT_INT_TICK ) )
									/* HREG_EV_TX_EXT := 0x0000 or HREG_EV_TX_EXC and/or HREG_EV_TICK
									 * could be extended with HREG_EV_TX */
#if HCF_EXT_INT_TX_EX != HREG_EV_TX_EXC
err: these values should match;
#endif // HCF_EXT_INT_TX_EX / HREG_EV_TX_EXC

#if HCF_EXT_INT_TICK != HREG_EV_TICK
err: these values should match;
#endif // HCF_EXT_INT_TICK / HREG_EV_TICK

//************************* Host Software
#define HREG_SW_0				0x28		//
#define HREG_SW_1				0x2A		//
#define HREG_SW_2				0x2C		//
//rsrvd #define HREG_SW_3		0x2E		//
//************************* Control and Auxiliary Port

#define HREG_IO					0x12
#define		HREG_IO_SRESET			0x0001
#define		HREG_IO_WAKEUP_ASYNC	0x0002
#define		HREG_IO_WOKEN_UP		0x0004
#define HREG_CNTL				0x14		//
//#define		HREG_CNTL_WAKEUP_SYNC	0x0001
#define		HREG_CNTL_AUX_ENA_STAT	0xC000
#define		HREG_CNTL_AUX_DIS_STAT	0x0000
#define		HREG_CNTL_AUX_ENA_CNTL	0x8000
#define		HREG_CNTL_AUX_DIS_CNTL	0x4000
#define		HREG_CNTL_AUX_DSD		0x2000
#define		HREG_CNTL_AUX_ENA		(HREG_CNTL_AUX_ENA_CNTL | HREG_CNTL_AUX_DIS_CNTL )
#define HREG_SPARE				0x16		//
#define HREG_AUX_PAGE			0x3A		//
#define HREG_AUX_OFFSET			0x3C		//
#define HREG_AUX_DATA			0x3E		//

#if HCF_DMA
//************************* DMA (bus mastering)
	// Be careful to use these registers only at a genuine 32 bits NIC
	// On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences
	// thereof, e.g.  HREG_DMA_CTRL register maps to HREG_CMD.
#define HREG_DMA_CTRL						0x0040
#define HREG_TXDMA_PTR32					0x0044
#define HREG_TXDMA_PRIO_PTR32				0x0048
#define HREG_TXDMA_HIPRIO_PTR32				0x004C
#define HREG_RXDMA_PTR32					0x0050
#define HREG_CARDDETECT_1					0x007C // contains 7D37
#define HREG_CARDDETECT_2					0x007E // contains 7DE7
#define HREG_FREETIMER						0x0058
#define HREG_DMA_RX_CNT						0x0026

/******************************************************************************
* Defines for the bits in the DmaControl register (@40h)
******************************************************************************/
#define HREG_DMA_CTRL_RXHWEN				0x80000000 // high word enable bit
#define HREG_DMA_CTRL_RXRESET				0x40000000 // tx dma init bit
#define HREG_DMA_CTRL_RXBAP1				BIT29
#define HREG_DMA_CTRL_RX_STALLED			BIT28
#define HREG_DMA_CTRL_RXAUTOACK_DMADONE		BIT27 // no host involvement req. for TDMADONE event
#define HREG_DMA_CTRL_RXAUTOACK_INFO		BIT26 // no host involvement req. for alloc event
#define HREG_DMA_CTRL_RXAUTOACK_DMAEN		0x02000000 // no host involvement req. for TxDMAen event
#define HREG_DMA_CTRL_RXAUTOACK_RX			0x01000000 // no host involvement req. for tx event
#define HREG_DMA_CTRL_RX_BUSY				BIT23 // read only bit
//#define HREG_DMA_CTRL_RX_RBUFCONT_PLAIN		0	  // bits 21..20
//#define HREG_DMA_CTRL_RX_MODE_PLAIN_DMA		0	  // mode 0
#define HREG_DMA_CTRL_RX_MODE_SINGLE_PACKET	0x00010000 // mode 1
#define HREG_DMA_CTRL_RX_MODE_MULTI_PACKET	0x00020000 // mode 2
//#define HREG_DMA_CTRL_RX_MODE_DISABLE		(0x00020000|0x00010000) // disable tx dma engine
#define HREG_DMA_CTRL_TXHWEN				0x8000 // low word enable bit
#define HREG_DMA_CTRL_TXRESET				0x4000 // rx dma init bit
#define HREG_DMA_CTRL_TXBAP1				BIT13
#define HREG_DMA_CTRL_TXAUTOACK_DMADONE		BIT11 // no host involvement req. for RxDMADONE event
#define HREG_DMA_CTRL_TXAUTOACK_DMAEN		0x00000400 // no host involvement req. for RxDMAen event
#define HREG_DMA_CTRL_TXAUTOACK_DMAALLOC	0x00000200  // no host involvement req. for info event
#define HREG_DMA_CTRL_TXAUTOACK_TX			0x00000100  // no host involvement req. for rx event
#define HREG_DMA_CTRL_TX_BUSY				BIT7  // read only bit
//#define HREG_DMA_CTRL_TX_TBUFCONT_PLAIN		0	  // bits 6..5
//#define HREG_DMA_CTRL_TX_MODE_PLAIN_DMA		0	  // mode 0
#define HREG_DMA_CTRL_TX_MODE_SINGLE_PACKET	BIT0 // mode 1
#define HREG_DMA_CTRL_TX_MODE_MULTI_PACKET	0x00000002 // mode 2
//#define HREG_DMA_CTRL_TX_MODE_DISABLE		(0x00000001|0x00000002) // disable tx dma engine

//configuration DWORD to configure DMA for mode2 operation, using BAP0 as the DMA BAP.
#define DMA_CTRLSTAT_GO (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RX_MODE_MULTI_PACKET | \
                         HREG_DMA_CTRL_RXAUTOACK_DMAEN | HREG_DMA_CTRL_RXAUTOACK_RX | \
                         HREG_DMA_CTRL_TXHWEN | /*;?HREG_DMA_CTRL_TX_TBUFCONT_PLAIN |*/ \
                         HREG_DMA_CTRL_TX_MODE_MULTI_PACKET | HREG_DMA_CTRL_TXAUTOACK_DMAEN |\
                         HREG_DMA_CTRL_TXAUTOACK_DMAALLOC)

//configuration DWORD to reset both the Tx and Rx DMA engines
#define DMA_CTRLSTAT_RESET (HREG_DMA_CTRL_RXHWEN | HREG_DMA_CTRL_RXRESET | HREG_DMA_CTRL_TXHWEN | HREG_DMA_CTRL_TXRESET)

//#define DESC_DMA_OWNED     		0x80000000 					// BIT31
#define DESC_DMA_OWNED     		0x8000	 					// BIT31
#define DESC_SOP   			 	0x8000 						// BIT15
#define DESC_EOP   			 	0x4000 						// BIT14

#define DMA_RX				0
#define DMA_TX				1

// #define IFB_RxFirstDesc		IFB_FirstDesc[DMA_RX]
// #define IFB_TxFirstDesc		IFB_FirstDesc[DMA_TX]
// #define IFB_RxLastDesc		IFB_LastDesc[DMA_RX]
// #define IFB_TxLastDesc		IFB_LastDesc[DMA_TX]

#endif // HCF_DMA
//
/************************************************************************************************/
/**********************************  EQUATES  ***************************************************/
/************************************************************************************************/

// Hermes Command Codes and Qualifier bits
#define 	HCMD_BUSY			0x8000	// Busy bit, applicable for all commands
#define HCMD_INI				0x0000	//
#define HCMD_ENABLE				HCF_CNTL_ENABLE		// 0x0001
#define HCMD_DISABLE			HCF_CNTL_DISABLE	// 0x0002
#define HCMD_CONNECT			HCF_CNTL_CONNECT	// 0x0003
#define HCMD_EXECUTE			0x0004	//
#define HCMD_DISCONNECT			HCF_CNTL_DISCONNECT	// 0x0005
#define HCMD_SLEEP				0x0006	//
#define HCMD_CONTINUE			HCF_CNTL_CONTINUE	// 0x0007
#define 	HCMD_RETRY			0x0100	// Retry bit
#define HCMD_ALLOC				0x000A	//
#define HCMD_TX					0x000B	//
#define 	HCMD_RECL			0x0100	// Reclaim bit, applicable for Tx and Inquire
#define HCMD_INQUIRE			0x0011	//
#define HCMD_ACCESS				0x0021	//
#define 	HCMD_ACCESS_WRITE	0x0100	// Write bit
#define HCMD_PROGRAM			0x0022	//
#define HCMD_READ_MIF			0x0030
#define HCMD_WRITE_MIF			0x0031
#define HCMD_THESEUS			0x0038
#define 	HCMD_STARTPREAMBLE  0x0E00	// Start continuous preamble Tx
#define 	HCMD_STOP			0x0F00	// Stop Theseus test mode

//Configuration Management
//

#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM	1	// Default Bottom Compatibility for Primary Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_PRI_3_TOP	1	// Default Top    Compatibility for Primary Firmware - driver I/F

#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM	1	// Default Bottom Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_4_TOP	1	// Default Top    Compatibility for H/W - driver I/F

#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM	1	// Default Bottom Compatibility for H/W - driver I/F
#define CFG_DRV_ACT_RANGES_HSI_5_TOP	1	// Default Top    Compatibility for H/W - driver I/F

#if (HCF_TYPE) & HCF_TYPE_WPA
#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM	16	// Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_1_TOP    16	// Default Top    Compatibility for AP Firmware - driver I/F
#else  //;? is this REALLY O.K.
#define CFG_DRV_ACT_RANGES_APF_1_BOTTOM	1	// Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_1_TOP    1	// Default Top    Compatibility for AP Firmware - driver I/F
#endif // HCF_TYPE_WPA

#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM	2	// Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_2_TOP    2	// Default Top    Compatibility for AP Firmware - driver I/F

#define CFG_DRV_ACT_RANGES_APF_3_BOTTOM	1	// Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_3_TOP    1	// Default Top    Compatibility for AP Firmware - driver I/F

#define CFG_DRV_ACT_RANGES_APF_4_BOTTOM	1	// Default Bottom Compatibility for AP Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_APF_4_TOP    1	// Default Top    Compatibility for AP Firmware - driver I/F

#if (HCF_TYPE) & HCF_TYPE_HII5
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM	6	// Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_2_TOP    6	// Default Top    Compatibility for Station Firmware - driver I/F
#else // (HCF_TYPE) & HCF_TYPE_HII5
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM	1	// Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_2_TOP    2	// Default Top    Compatibility for Station Firmware - driver I/F
#endif // (HCF_TYPE) & HCF_TYPE_HII5

#define CFG_DRV_ACT_RANGES_STA_3_BOTTOM	1	// Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_3_TOP    1	// Default Top    Compatibility for Station Firmware - driver I/F

#define CFG_DRV_ACT_RANGES_STA_4_BOTTOM	1	// Default Bottom Compatibility for Station Firmware - driver I/F
#define CFG_DRV_ACT_RANGES_STA_4_TOP    1	// Default Top    Compatibility for Station Firmware - driver I/F

//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_PRI_1_TOP || defined HCF_CFG_PRI_1_BOTTOM
err: PRI_1 not supported for H-I;	// Compatibility for Primary Firmware - driver I/F
#endif // HCF_CFG_PRI_1_TOP / HCF_CFG_PRI_1_BOTTOM

#if defined HCF_CFG_PRI_2_TOP || defined HCF_CFG_PRI_2_BOTTOM
err: PRI_2 not supported for H-I;	// Compatibility for Primary Firmware - driver I/F
#endif // HCF_CFG_PRI_2_TOP / HCF_CFG_PRI_2_BOTTOM

#ifdef HCF_CFG_PRI_3_TOP									// Top Compatibility for Primary Firmware - driver I/F
#if HCF_CFG_PRI_3_TOP == 0 || \
	CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_TOP && HCF_CFG_PRI_3_TOP <= CFG_DRV_ACT_RANGES_PRI_3_TOP
#undef CFG_DRV_ACT_RANGES_PRI_3_TOP
#define CFG_DRV_ACT_RANGES_PRI_3_TOP	HCF_CFG_PRI_3_TOP
#else
err: ;
#endif
#endif // HCF_CFG_PRI_3_TOP

#ifdef HCF_CFG_PRI_3_BOTTOM                       			// Bottom Compatibility for Primary Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_PRI_3_BOTTOM <= HCF_CFG_PRI_3_BOTTOM && HCF_CFG_PRI_3_BOTTOM <= CFG_DRV_ACT_RANGES_PRI_3_TOP
#undef CFG_DRV_ACT_RANGES_PRI_3_BOTTOM
#define CFG_DRV_ACT_RANGES_PRI_3_BOTTOM	HCF_CFG_PRI_3_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_PRI_3_BOTTOM

//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_HSI_0_TOP || defined HCF_CFG_HSI_0_BOTTOM
err: HSI_0 not supported for H-I;	// Compatibility for HSI I/F
#endif // HCF_CFG_HSI_0_TOP / HCF_CFG_HSI_0_BOTTOM

#if defined HCF_CFG_HSI_1_TOP || defined HCF_CFG_HSI_1_BOTTOM
err: HSI_1 not supported for H-I;	// Compatibility for HSI I/F
#endif // HCF_CFG_HSI_1_TOP / HCF_CFG_HSI_1_BOTTOM

#if defined HCF_CFG_HSI_2_TOP || defined HCF_CFG_HSI_2_BOTTOM
err: HSI_2 not supported for H-I;	// Compatibility for HSI I/F
#endif // HCF_CFG_HSI_2_TOP / HCF_CFG_HSI_2_BOTTOM

#if defined HCF_CFG_HSI_3_TOP || defined HCF_CFG_HSI_3_BOTTOM
err: HSI_3 not supported for H-I;	// Compatibility for HSI I/F
#endif // HCF_CFG_HSI_3_TOP / HCF_CFG_HSI_3_BOTTOM

#ifdef HCF_CFG_HSI_4_TOP 									// Top Compatibility for HSI I/F
#if HCF_CFG_HSI_4_TOP == 0 || \
	CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= CF_CFG_HSI_4_TOP && HCF_CFG_HSI_4_TOP <= CFG_DRV_ACT_RANGES_HSI_4_TOP
#undef CFG_DRV_ACT_RANGES_HSI_4_TOP
#define CFG_DRV_ACT_RANGES_HSI_4_TOP	HCF_CFG_HSI_4_TOP
#else
err: ;
#endif
#endif // HCF_CFG_HSI_4_TOP

#ifdef HCF_CFG_HSI_4_BOTTOM								// Bottom Compatibility for HSI I/F
#if CFG_DRV_ACT_RANGES_HSI_4_BOTTOM <= HCF_CFG_HSI_4_BOTTOM && HCF_CFG_HSI_4_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_4_TOP
#undef CFG_DRV_ACT_RANGES_HSI_4_BOTTOM
#define CFG_DRV_ACT_RANGES_HSI_4_BOTTOM	HCF_CFG_HSI_4_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_HSI_4_BOTTOM

#ifdef HCF_CFG_HSI_5_TOP 									// Top Compatibility for HSI I/F
#if HCF_CFG_HSI_5_TOP == 0 || \
	CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= CF_CFG_HSI_5_TOP && HCF_CFG_HSI_5_TOP <= CFG_DRV_ACT_RANGES_HSI_5_TOP
#undef CFG_DRV_ACT_RANGES_HSI_5_TOP
#define CFG_DRV_ACT_RANGES_HSI_5_TOP	HCF_CFG_HSI_5_TOP
#else
err: ;
#endif
#endif // HCF_CFG_HSI_5_TOP

#ifdef HCF_CFG_HSI_5_BOTTOM								// Bottom Compatibility for HSI I/F
#if CFG_DRV_ACT_RANGES_HSI_5_BOTTOM <= HCF_CFG_HSI_5_BOTTOM && HCF_CFG_HSI_5_BOTTOM <= CFG_DRV_ACT_RANGES_HSI_5_TOP
#undef CFG_DRV_ACT_RANGES_HSI_5_BOTTOM
#define CFG_DRV_ACT_RANGES_HSI_5_BOTTOM	HCF_CFG_HSI_5_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_HSI_5_BOTTOM
//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_APF_1_TOP || defined HCF_CFG_APF_1_BOTTOM
err: APF_1 not supported for H-I;	// Compatibility for AP Firmware - driver I/F
#endif // HCF_CFG_APF_1_TOP / HCF_CFG_APF_1_BOTTOM

#ifdef HCF_CFG_APF_2_TOP                  					// Top Compatibility for AP Firmware - driver I/F
#if HCF_CFG_APF_2_TOP == 0 || \
	CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_TOP && HCF_CFG_APF_2_TOP <= CFG_DRV_ACT_RANGES_APF_2_TOP
#undef CFG_DRV_ACT_RANGES_APF_2_TOP
#define CFG_DRV_ACT_RANGES_APF_2_TOP	HCF_CFG_APF_2_TOP
#else
err: ;
#endif
#endif // HCF_CFG_APF_TOP

#ifdef HCF_CFG_APF_2_BOTTOM                       			// Bottom Compatibility for AP Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_APF_2_BOTTOM <= HCF_CFG_APF_2_BOTTOM && HCF_CFG_APF_2_BOTTOM <= CFG_DRV_ACT_RANGES_APF_2_TOP
#undef CFG_DRV_ACT_RANGES_APF_2_BOTTOM
#define CFG_DRV_ACT_RANGES_APF_2_BOTTOM	HCF_CFG_APF_2_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_APF_BOTTOM

//---------------------------------------------------------------------------------------------------------------------
#if defined HCF_CFG_STA_1_TOP || defined HCF_CFG_STA_1_BOTTOM
err: STA_1 not supported for H-I;	// Compatibility for Station Firmware - driver I/F
#endif // HCF_CFG_STA_1_TOP / HCF_CFG_STA_1_BOTTOM

#ifdef HCF_CFG_STA_2_TOP                  					// Top Compatibility for Station Firmware - driver I/F
#if HCF_CFG_STA_2_TOP == 0 || \
	CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_TOP && HCF_CFG_STA_2_TOP <= CFG_DRV_ACT_RANGES_STA_2_TOP
#undef CFG_DRV_ACT_RANGES_STA_2_TOP
#define CFG_DRV_ACT_RANGES_STA_2_TOP	HCF_CFG_STA_2_TOP
#else
err: ;
#endif
#endif // HCF_CFG_STA_TOP

#ifdef HCF_CFG_STA_2_BOTTOM                       			// Bottom Compatibility for Station Firmware - driver I/F
#if CFG_DRV_ACT_RANGES_STA_2_BOTTOM <= HCF_CFG_STA_2_BOTTOM && HCF_CFG_STA_2_BOTTOM <= CFG_DRV_ACT_RANGES_STA_2_TOP
#undef CFG_DRV_ACT_RANGES_STA_2_BOTTOM
#define CFG_DRV_ACT_RANGES_STA_2_BOTTOM	HCF_CFG_STA_2_BOTTOM
#else
err: ;
#endif
#endif // HCF_CFG_STA_BOTTOM

/************************************************************************************************/
/**************************************  MACROS  ************************************************/
/************************************************************************************************/

#ifdef HCF_SLEEP
#if defined MSF_WAIT
err: MSF should no longer supply this macro;
#else
#define MSF_WAIT(x) 																			\
	{ PROT_CNT_INI														\
		HCF_WAIT_WHILE( ( IPW( HREG_IO ) & HREG_IO_WOKEN_UP ) == 0 );						\
		HCFASSERT( prot_cnt, IPW( HREG_IO ) )							\
	}
#endif // MSF_WAIT
#else
#define MSF_WAIT(x)	/*NOP*/
#endif // HCF_SLEEP

#define LOF(x) 			(sizeof(x)/sizeof(hcf_16)-1)

#define MUL_BY_2( x )	( (x) << 1 )						//used to multiply by 2
#define DIV_BY_2( x )	( (x) >> 1 )						//used to divide by 2

//resolve problems on for some 16 bits compilers to create 32 bit values
#define MERGE_2( hw, lw )	( ( ((hcf_32)(hw)) << 16 ) | ((hcf_16)(lw)) )

#if ! defined HCF_STATIC
#define		  HCF_STATIC	static
#endif //	  HCF_STATIC

#if ( (HCF_TYPE) & HCF_TYPE_HII5 ) == 0
#define DAWA_ACK( mask) {													\
	OPW( HREG_EV_ACK, mask | HREG_EV_ACK_REG_READY );						\
	OPW( HREG_EV_ACK, (mask & ~HREG_EV_ALLOC) | HREG_EV_ACK_REG_READY ); 	}
#define DAWA_ZERO_FID(reg) OPW( reg, 0 );
#else
#define DAWA_ACK( mask)   OPW( HREG_EV_ACK, mask );
#define DAWA_ZERO_FID(reg)
#endif // HCF_TYPE_HII5

#if (HCF_TYPE) & HCF_TYPE_WPA
#define	CALC_RX_MIC( p, len ) calc_mic_rx_frag( ifbp, p, len )
#define	CALC_TX_MIC( p, len ) calc_mic_tx_frag( ifbp, p, len )
#define IF_SSN(x)  x
#define IF_NOT_SSN(x)
#else
#define	CALC_RX_MIC( p, len )
#define	CALC_TX_MIC( p, len )
#define MIC_RX_RTN( mic, dw )
#define MIC_TX_RTN( mic, dw )
#define IF_SSN(x)
#define IF_NOT_SSN(x) x
#endif // HCF_TYPE_WPA

#if HCF_TALLIES & HCF_TALLIES_HCF		//HCF tally support
#define IF_TALLY(x)  x
#else
#define IF_TALLY(x)
#endif // HCF_TALLIES_HCF

#if HCF_DMA
#define IF_DMA(x)			x
#define IF_NOT_DMA(x)
#define IF_USE_DMA(x) 		if (   ifbp->IFB_CntlOpt & USE_DMA  ) x
#define IF_NOT_USE_DMA(x)	if ( !(ifbp->IFB_CntlOpt & USE_DMA) ) x
#else
#define IF_DMA(x)
#define IF_NOT_DMA(x)		x
#define IF_USE_DMA(x)
#define IF_NOT_USE_DMA(x) 	x
#endif // HCF_DMA

#define IPW(x) ((hcf_16)IN_PORT_WORD( ifbp->IFB_IOBase + (x) ) )
#define OPW(x, y) OUT_PORT_WORD( ifbp->IFB_IOBase + (x), y )
	/* make sure the implementation of HCF_WAIT_WHILE is such that there may be multiple HCF_WAIT_WHILE calls
	 * in a row and that when one fails all subsequent fail immediately without reinitialization of prot_cnt
	 */
#if HCF_PROT_TIME == 0
#define PROT_CNT_INI
#define IF_PROT_TIME(x)
#if defined HCF_YIELD
#define HCF_WAIT_WHILE( x ) while ( (x) && (HCF_YIELD) ) /*NOP*/;
#else
#define HCF_WAIT_WHILE( x ) while ( x ) /*NOP*/;
#endif // HCF_YIELD
#else
#define PROT_CNT_INI 	hcf_32 prot_cnt = ifbp->IFB_TickIni;
#define IF_PROT_TIME(x)	x
#if defined HCF_YIELD
#define HCF_WAIT_WHILE( x ) while ( prot_cnt && (x) && (HCF_YIELD) ) prot_cnt--;
#else
#include <linux/delay.h>
#define HCF_WAIT_WHILE( x ) while ( prot_cnt && (x) ) { udelay(2); prot_cnt--; }
#endif // HCF_YIELD
#endif // HCF_PROT_TIME

#if defined HCF_EX_INT
//#if HCF_EX_INT & ~( HCF_EX_INT_TX_EX | HCF_EX_INT_TX_OK | HCF_EX_INT_TICK )
;? out dated checking
err: you used an invalid bitmask;
// #endif // HCF_EX_INT validation
// #else
// #define HCF_EX_INT 0x000
#endif // HCF_EX_INT

#if 0 //get compiler going
#if HCF_EX_INT_TICK	!= HREG_EV_TICK
;? out dated checking
err: someone redefined these macros while the implemenation assumes they are equal;
#endif
#if HCF_EX_INT_TX_OK != HFS_TX_CNTL_TX_OK || HFS_TX_CNTL_TX_OK != HREG_EV_TX_OK
;? out dated checking
err: someone redefined these macros while the implemenation assumes they are equal;
#endif
#if HCF_EX_INT_TX_EX != HFS_TX_CNTL_TX_EX || HFS_TX_CNTL_TX_EX != HREG_EV_TX_EX
;? out dated checking
err: someone redefined these macros while the implemenation assumes they are equal;
#endif
#endif // 0 get compiler going

/* The assert in HCFLOGENTRY checks against re-entrancy. Re-entrancy could be caused by MSF logic at
 * task-level calling hcf_functions without shielding with HCF_ACT_ON/_OFF. When an interrupt occurs,
 * the ISR could (either directly or indirectly) cause re-entering of the interrupted HCF-routine.
 *
 * The "(ifbp->IFB_AssertWhere = where)" test in HCFLOGENTRY services ALSO as a statement to get around:
 * #pragma warning: conditional expression is constant
 * on the if-statement
 */
#if HCF_ASSERT
#define HCFASSERT(x,q) {if (!(x)) {mdd_assert(        ifbp, __LINE__                   , q );}}
#define MMDASSERT(x,q) {if (!(x)) {mdd_assert( assert_ifbp, __LINE__ + FILE_NAME_OFFSET, q );}}

#define HCFLOGENTRY( where, what ) 														\
{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) {											\
	HCF_ENTRY( ifbp ); 																	\
	HCFASSERT( (ifbp->IFB_AssertTrace & 1<<((where)&0xF)) == 0, ifbp->IFB_AssertTrace );		\
	ifbp->IFB_AssertTrace |= 1<<((where)&0xF);												\
	}																					\
HCFTRACE(ifbp, where )																	\
HCFTRACEVALUE(ifbp, what )																\
}

#define HCFLOGEXIT( where ) 															\
{if ( (ifbp->IFB_AssertWhere = where) <= 15 ) {											\
  	HCF_EXIT( ifbp ); 																	\
	ifbp->IFB_AssertTrace &= ~(1<<((where)&0xF));												\
	}						 															\
HCFTRACE(ifbp, (where)|HCF_TRACE_EXIT )													\
}

#else // HCF_ASSERT
#define HCFASSERT( x, q )
#define MMDASSERT( x, q )
#define HCFLOGENTRY( where, what ) 	  	{HCF_ENTRY( ifbp );}
#define HCFLOGEXIT( where ) 		  	{HCF_EXIT( ifbp );}
#endif // HCF_ASSERT

#if HCF_INT_ON
/* ;? HCFASSERT_INT
 * #if (HCF_SLEEP) & HCF_DDS
 * #define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF && ifbp->IFB_IntOffCnt != 0xFFFE, \
 * 								 ifbp->IFB_IntOffCnt )
 * #else
 */
#define HCFASSERT_INT HCFASSERT( ifbp->IFB_IntOffCnt != 0xFFFF, ifbp->IFB_IntOffCnt )
// #endif // HCF_DDS
#else
#define HCFASSERT_INT
#endif // HCF_INT_ON

#if defined HCF_TRACE
#define HCFTRACE(ifbp, where )	   {OPW( HREG_SW_1, where );}
//#define HCFTRACE(ifbp, where )	   {HCFASSERT( DO_ASSERT, where );}
#define HCFTRACEVALUE(ifbp, what ) {OPW( HREG_SW_2, what  );}
//#define HCFTRACEVALUE(ifbp, what ) {HCFASSERT( DO_ASSERT, what  );}
#else
#define HCFTRACE(ifbp, where )
#define HCFTRACEVALUE(ifbp, what )
#endif // HCF_TRACE

#if HCF_BIG_ENDIAN
#define BE_PAR(x)				,x
#else
#define BE_PAR(x)
#endif // HCF_BIG_ENDIAN

/************************************************************************************************/
/**************************************  END OF MACROS  *****************************************/
/************************************************************************************************/

/************************************************************************************************/
/***************************************  PROTOTYPES  *******************************************/
/************************************************************************************************/

#if HCF_ASSERT
extern IFBP BASED assert_ifbp;			//to make asserts easily work under MMD and DHF
EXTERN_C void		 mdd_assert			(IFBP ifbp, unsigned int line_number, hcf_32 q );
#endif //HCF_ASSERT

#if ! ( (HCF_IO) & HCF_IO_32BITS )				// defined 16 bits only
#undef OUT_PORT_STRING_32
#undef IN_PORT_STRING_32
#endif // HCF_IO
#endif	//HCFDEFC_H

C++程序 | 802行 | 32.94 KB

登录后可以享受更多权益