* Clock bindings for Freescale i.MX5
Required properties:
- compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53
- reg: Address and length of the register set
- interrupts: Should contain CCM interrupt
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX5
clocks and IDs.
Clock ID
---------------------------
dummy 0
ckil 1
osc 2
ckih1 3
ckih2 4
ahb 5
ipg 6
axi_a 7
axi_b 8
uart_pred 9
uart_root 10
esdhc_a_pred 11
esdhc_b_pred 12
esdhc_c_s 13
esdhc_d_s 14
emi_sel 15
emi_slow_podf 16
nfc_podf 17
ecspi_pred 18
ecspi_podf 19
usboh3_pred 20
usboh3_podf 21
usb_phy_pred 22
usb_phy_podf 23
cpu_podf 24
di_pred 25
tve_s 27
uart1_ipg_gate 28
uart1_per_gate 29
uart2_ipg_gate 30
uart2_per_gate 31
uart3_ipg_gate 32
uart3_per_gate 33
i2c1_gate 34
i2c2_gate 35
gpt_ipg_gate 36
pwm1_ipg_gate 37
pwm1_hf_gate 38
pwm2_ipg_gate 39
pwm2_hf_gate 40
gpt_hf_gate 41
fec_gate 42
usboh3_per_gate 43
esdhc1_ipg_gate 44
esdhc2_ipg_gate 45
esdhc3_ipg_gate 46
esdhc4_ipg_gate 47
ssi1_ipg_gate 48
ssi2_ipg_gate 49
ssi3_ipg_gate 50
ecspi1_ipg_gate 51
ecspi1_per_gate 52
ecspi2_ipg_gate 53
ecspi2_per_gate 54
cspi_ipg_gate 55
sdma_gate 56
emi_slow_gate 57
ipu_s 58
ipu_gate 59
nfc_gate 60
ipu_di1_gate 61
vpu_s 62
vpu_gate 63
vpu_reference_gate 64
uart4_ipg_gate 65
uart4_per_gate 66
uart5_ipg_gate 67
uart5_per_gate 68
tve_gate 69
tve_pred 70
esdhc1_per_gate 71
esdhc2_per_gate 72
esdhc3_per_gate 73
esdhc4_per_gate 74
usb_phy_gate 75
hsi2c_gate 76
mipi_hsc1_gate 77
mipi_hsc2_gate 78
mipi_esc_gate 79
mipi_hsp_gate 80
ldb_di1_div_3_5 81
ldb_di1_div 82
ldb_di0_div_3_5 83
ldb_di0_div 84
ldb_di1_gate 85
can2_serial_gate 86
can2_ipg_gate 87
i2c3_gate 88
lp_apm 89
periph_apm 90
main_bus 91
ahb_max 92
aips_tz1 93
aips_tz2 94
tmax1 95
tmax2 96
tmax3 97
spba 98
uart_sel 99
esdhc_a_sel 100
esdhc_b_sel 101
esdhc_a_podf 102
esdhc_b_podf 103
ecspi_sel 104
usboh3_sel 105
usb_phy_sel 106
iim_gate 107
usboh3_gate 108
emi_fast_gate 109
ipu_di0_gate 110
gpc_dvfs 111
pll1_sw 112
pll2_sw 113
pll3_sw 114
ipu_di0_sel 115
ipu_di1_sel 116
tve_ext_sel 117
mx51_mipi 118
pll4_sw 119
ldb_di1_sel 120
di_pll4_podf 121
ldb_di0_sel 122
ldb_di0_gate 123
usb_phy1_gate 124
usb_phy2_gate 125
per_lp_apm 126
per_pred1 127
per_pred2 128
per_podf 129
per_root 130
ssi_apm 131
ssi1_root_sel 132
ssi2_root_sel 133
ssi3_root_sel 134
ssi_ext1_sel 135
ssi_ext2_sel 136
ssi_ext1_com_sel 137
ssi_ext2_com_sel 138
ssi1_root_pred 139
ssi1_root_podf 140
ssi2_root_pred 141
ssi2_root_podf 142
ssi_ext1_pred 143
ssi_ext1_podf 144
ssi_ext2_pred 145
ssi_ext2_podf 146
ssi1_root_gate 147
ssi2_root_gate 148
ssi3_root_gate 149
ssi_ext1_gate 150
ssi_ext2_gate 151
epit1_ipg_gate 152
epit1_hf_gate 153
epit2_ipg_gate 154
epit2_hf_gate 155
can_sel 156
can1_serial_gate 157
can1_ipg_gate 158
owire_gate 159
gpu3d_s 160
gpu2d_s 161
gpu3d_gate 162
gpu2d_gate 163
garb_gate 164
cko1_sel 165
cko1_podf 166
cko1 167
cko2_sel 168
cko2_podf 169
cko2 170
srtc_gate 171
pata_gate 172
Examples (for mx53):
clks: ccm@53fd4000{
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
can1: can@53fc8000 {
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks 158>, <&clks 157>;
clock-names = "ipg", "per";
status = "disabled";
};