/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h * * Copyright (c) 2003 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * * VR1000 - CPLD control constants * Machine VR1000 - IRQ Number definitions * Machine VR1000 - Memory map definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef __MACH_S3C24XX_VR1000_H #define __MACH_S3C24XX_VR1000_H __FILE__ #define VR1000_CPLD_CTRL2_RAMWEN (0x04) /* SRAM Write Enable */ /* irq numbers to onboard peripherals */ #define VR1000_IRQ_USBOC IRQ_EINT19 #define VR1000_IRQ_IDE0 IRQ_EINT16 #define VR1000_IRQ_IDE1 IRQ_EINT17 #define VR1000_IRQ_SERIAL IRQ_EINT12 #define VR1000_IRQ_DM9000A IRQ_EINT10 #define VR1000_IRQ_DM9000N IRQ_EINT9 #define VR1000_IRQ_SMALERT IRQ_EINT8 /* map */ #define VR1000_IOADDR(x) (S3C2410_ADDR((x) + 0x01300000)) /* we put the CPLD registers next, to get them out of the way */ #define VR1000_VA_CTRL1 VR1000_IOADDR(0x00000000) /* 0x01300000 */ #define VR1000_PA_CTRL1 (S3C2410_CS5 | 0x7800000) #define VR1000_VA_CTRL2 VR1000_IOADDR(0x00100000) /* 0x01400000 */ #define VR1000_PA_CTRL2 (S3C2410_CS1 | 0x6000000) #define VR1000_VA_CTRL3 VR1000_IOADDR(0x00200000) /* 0x01500000 */ #define VR1000_PA_CTRL3 (S3C2410_CS1 | 0x6800000) #define VR1000_VA_CTRL4 VR1000_IOADDR(0x00300000) /* 0x01600000 */ #define VR1000_PA_CTRL4 (S3C2410_CS1 | 0x7000000) /* next, we have the PC104 ISA interrupt registers */ #define VR1000_PA_PC104_IRQREQ (S3C2410_CS5 | 0x6000000) /* 0x01700000 */ #define VR1000_VA_PC104_IRQREQ VR1000_IOADDR(0x00400000) #define VR1000_PA_PC104_IRQRAW (S3C2410_CS5 | 0x6800000) /* 0x01800000 */ #define VR1000_VA_PC104_IRQRAW VR1000_IOADDR(0x00500000) #define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */ #define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000) /* * 0xE0000000 contains the IO space that is split by speed and * whether the access is for 8 or 16bit IO... this ensures that * the correct access is made * * 0x10000000 of space, partitioned as so: * * 0x00000000 to 0x04000000 8bit, slow * 0x04000000 to 0x08000000 16bit, slow * 0x08000000 to 0x0C000000 16bit, net * 0x0C000000 to 0x10000000 16bit, fast * * each of these spaces has the following in: * * 0x02000000 to 0x02100000 1MB IDE primary channel * 0x02100000 to 0x02200000 1MB IDE primary channel aux * 0x02200000 to 0x02400000 1MB IDE secondary channel * 0x02300000 to 0x02400000 1MB IDE secondary channel aux * 0x02500000 to 0x02600000 1MB Davicom DM9000 ethernet controllers * 0x02600000 to 0x02700000 1MB * * the phyiscal layout of the zones are: * nGCS2 - 8bit, slow * nGCS3 - 16bit, slow * nGCS4 - 16bit, net * nGCS5 - 16bit, fast */ #define VR1000_VA_MULTISPACE (0xE0000000) #define VR1000_VA_ISAIO (VR1000_VA_MULTISPACE + 0x00000000) #define VR1000_VA_ISAMEM (VR1000_VA_MULTISPACE + 0x01000000) #define VR1000_VA_IDEPRI (VR1000_VA_MULTISPACE + 0x02000000) #define VR1000_VA_IDEPRIAUX (VR1000_VA_MULTISPACE + 0x02100000) #define VR1000_VA_IDESEC (VR1000_VA_MULTISPACE + 0x02200000) #define VR1000_VA_IDESECAUX (VR1000_VA_MULTISPACE + 0x02300000) #define VR1000_VA_ASIXNET (VR1000_VA_MULTISPACE + 0x02400000) #define VR1000_VA_DM9000 (VR1000_VA_MULTISPACE + 0x02500000) #define VR1000_VA_SUPERIO (VR1000_VA_MULTISPACE + 0x02600000) /* physical offset addresses for the peripherals */ #define VR1000_PA_IDEPRI (0x02000000) #define VR1000_PA_IDEPRIAUX (0x02800000) #define VR1000_PA_IDESEC (0x03000000) #define VR1000_PA_IDESECAUX (0x03800000) #define VR1000_PA_DM9000 (0x05000000) #define VR1000_PA_SERIAL (0x11800000) #define VR1000_VA_SERIAL (VR1000_IOADDR(0x00700000)) /* VR1000 ram is in CS1, with A26..A24 = 2_101 */ #define VR1000_PA_SRAM (S3C2410_CS1 | 0x05000000) /* some configurations for the peripherals */ #define VR1000_DM9000_CS VR1000_VAM_CS4 #endif /* __MACH_S3C24XX_VR1000_H */