/* * Copyright (C) ST-Ericsson SA 2010 * * License terms: GNU General Public License (GPL) version 2 */ #ifndef __MACH_DB8500_REGS_H #define __MACH_DB8500_REGS_H /* Base address and bank offsets for ESRAM */ #define U8500_ESRAM_BASE 0x40000000 #define U8500_ESRAM_BANK_SIZE 0x00020000 #define U8500_ESRAM_BANK0 U8500_ESRAM_BASE #define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) #define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) /* * on V1 DMA uses 4KB for logical parameters position is right after the 64KB * reserved for security */ #define U8500_ESRAM_DMA_LCPA_OFFSET 0x10000 #define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK0 + U8500_ESRAM_DMA_LCPA_OFFSET) /* This address fulfills the 256k alignment requirement of the lcla base */ #define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4 #define U8500_PER3_BASE 0x80000000 #define U8500_STM_BASE 0x80100000 #define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) #define U8500_PER2_BASE 0x80110000 #define U8500_PER1_BASE 0x80120000 #define U8500_B2R2_BASE 0x80130000 #define U8500_HSEM_BASE 0x80140000 #define U8500_PER4_BASE 0x80150000 #define U8500_TPIU_BASE 0x80190000 #define U8500_ICN_BASE 0x81000000 #define U8500_BOOT_ROM_BASE 0x90000000 /* ASIC ID is at 0xbf4 offset within this region */ #define U8500_ASIC_ID_BASE 0x9001D000 #define U9540_BOOT_ROM_BASE 0xFFFE0000 /* ASIC ID is at 0xbf4 offset within this region */ #define U9540_ASIC_ID_BASE 0xFFFFD000 #define U8500_PER6_BASE 0xa03c0000 #define U8500_PER7_BASE 0xa03d0000 #define U8500_PER5_BASE 0xa03e0000 #define U8500_SVA_BASE 0xa0100000 #define U8500_SIA_BASE 0xa0200000 #define U8500_SGA_BASE 0xa0300000 #define U8500_MCDE_BASE 0xa0350000 #define U8500_DMA_BASE 0x801C0000 /* v1 */ #define U8500_SBAG_BASE 0xa0390000 #define U8500_SCU_BASE 0xa0410000 #define U8500_GIC_CPU_BASE 0xa0410100 #define U8500_TWD_BASE 0xa0410600 #define U8500_GIC_DIST_BASE 0xa0411000 #define U8500_L2CC_BASE 0xa0412000 #define U8500_MODEM_I2C 0xb7e02000 #define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) #define U8500_GPIO1_BASE (U8500_PER3_BASE + 0xE000) #define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xE000) #define U8500_GPIO3_BASE (U8500_PER5_BASE + 0x1E000) #define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) #define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) /* per6 base addresses */ #define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000) #define U8500_HASH0_BASE (U8500_PER6_BASE + 0x1000) #define U8500_HASH1_BASE (U8500_PER6_BASE + 0x2000) #define U8500_PKA_BASE (U8500_PER6_BASE + 0x4000) #define U8500_PKAM_BASE (U8500_PER6_BASE + 0x5100) #define U8500_MTU0_BASE (U8500_PER6_BASE + 0x6000) /* v1 */ #define U8500_MTU1_BASE (U8500_PER6_BASE + 0x7000) /* v1 */ #define U8500_CR_BASE (U8500_PER6_BASE + 0x8000) /* v1 */ #define U8500_CRYP0_BASE (U8500_PER6_BASE + 0xa000) #define U8500_CRYP1_BASE (U8500_PER6_BASE + 0xb000) #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) /* per5 base addresses */ #define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000) #define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) /* per4 base addresses */ #define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x00000) #define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x01000) #define U8500_RTT0_BASE (U8500_PER4_BASE + 0x02000) #define U8500_RTT1_BASE (U8500_PER4_BASE + 0x03000) #define U8500_RTC_BASE (U8500_PER4_BASE + 0x04000) #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) #define U9540_DMC1_BASE (U8500_PER4_BASE + 0x0A000) #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) #define U9540_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x6A000) #define U8500_PRCMU_TCPM_BASE (U8500_PER4_BASE + 0x60000) #define U8500_PRCMU_TIMER_3_BASE (U8500_PER4_BASE + 0x07338) #define U8500_PRCMU_TIMER_4_BASE (U8500_PER4_BASE + 0x07450) /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) #define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000) #define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000) #define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000) #define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000) #define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000) #define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) #define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000) #define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) /* per2 base addresses */ #define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000) #define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000) #define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000) #define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000) #define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000) #define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000) #define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000) #define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000) #define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000) #define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000) #define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000) #define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) /* per1 base addresses */ #define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000) #define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000) #define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000) #define U8500_MSP3_BASE (U8500_PER1_BASE + 0x5000) #define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000) #define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000) #define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000) #define U8500_I2C4_BASE (U8500_PER1_BASE + 0xa000) #define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xb000) #define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) #define U8500_SHRM_GOP_INTERRUPT_BASE 0xB7C00040 #define U8500_GPIOBANK0_BASE U8500_GPIO0_BASE #define U8500_GPIOBANK1_BASE (U8500_GPIO0_BASE + 0x80) #define U8500_GPIOBANK2_BASE U8500_GPIO1_BASE #define U8500_GPIOBANK3_BASE (U8500_GPIO1_BASE + 0x80) #define U8500_GPIOBANK4_BASE (U8500_GPIO1_BASE + 0x100) #define U8500_GPIOBANK5_BASE (U8500_GPIO1_BASE + 0x180) #define U8500_GPIOBANK6_BASE U8500_GPIO2_BASE #define U8500_GPIOBANK7_BASE (U8500_GPIO2_BASE + 0x80) #define U8500_GPIOBANK8_BASE U8500_GPIO3_BASE #define U8500_MCDE_SIZE 0x1000 #define U8500_DSI_LINK_SIZE 0x1000 #define U8500_DSI_LINK1_BASE (U8500_MCDE_BASE + U8500_MCDE_SIZE) #define U8500_DSI_LINK2_BASE (U8500_DSI_LINK1_BASE + U8500_DSI_LINK_SIZE) #define U8500_DSI_LINK3_BASE (U8500_DSI_LINK2_BASE + U8500_DSI_LINK_SIZE) #define U8500_DSI_LINK_COUNT 0x3 /* Modem and APE physical addresses */ #define U8500_MODEM_BASE 0xe000000 #define U8500_APE_BASE 0x6000000 /* SoC identification number information */ #define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0) /* Offsets to specific addresses in some IP blocks for DMA */ #define MSP_TX_RX_REG_OFFSET 0 #define CRYP1_RX_REG_OFFSET 0x10 #define CRYP1_TX_REG_OFFSET 0x8 #define HASH1_TX_REG_OFFSET 0x4 /* * Macros to get at IO space when running virtually * We dont map all the peripherals, let ioremap do * this for us. We map only very basic peripherals here. */ #define U8500_IO_VIRTUAL 0xf0000000 #define U8500_IO_PHYSICAL 0xa0000000 /* This is where we map in the ROM to check ASIC IDs */ #define UX500_VIRT_ROM 0xf0000000 /* This macro is used in assembly, so no cast */ #define IO_ADDRESS(x) \ (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL) /* typesafe io address */ #define __io_address(n) IOMEM(IO_ADDRESS(n)) /* Used by some plat-nomadik code */ #define io_p2v(n) __io_address(n) #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #endif