/* * linux/arch/arm/mm/cache-fa.S * * Copyright (C) 2005 Faraday Corp. * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> * * Based on cache-v4wb.S: * Copyright (C) 1997-2002 Russell king * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * Processors: FA520 FA526 FA626 */ #include <linux/linkage.h> #include <linux/init.h> #include <asm/memory.h> #include <asm/page.h> #include "proc-macros.S" /* * The size of one data cache line. */ #define CACHE_DLINESIZE 16 /* * The total size of the data cache. */ #ifdef CONFIG_ARCH_GEMINI #define CACHE_DSIZE 8192 #else #define CACHE_DSIZE 16384 #endif /* FIXME: put optimal value here. Current one is just estimation */ #define CACHE_DLIMIT (CACHE_DSIZE * 2) /* * flush_icache_all() * * Unconditionally clean and invalidate the entire icache. */ ENTRY(fa_flush_icache_all) mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mov pc, lr ENDPROC(fa_flush_icache_all) /* * flush_user_cache_all() * * Clean and invalidate all cache entries in a particular address * space. */ ENTRY(fa_flush_user_cache_all) /* FALLTHROUGH */ /* * flush_kern_cache_all() * * Clean and invalidate the entire cache. */ ENTRY(fa_flush_kern_cache_all) mov ip, #0 mov r2, #VM_EXEC __flush_whole_cache: mcr p15, 0, ip, c7, c14, 0 @ clean/invalidate D cache tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush mov pc, lr /* * flush_user_cache_range(start, end, flags) * * Invalidate a range of cache entries in the specified * address space. * * - start - start address (inclusive, page aligned) * - end - end address (exclusive, page aligned) * - flags - vma_area_struct flags describing address space */ ENTRY(fa_flush_user_cache_range) mov ip, #0 sub r3, r1, r0 @ calculate total size cmp r3, #CACHE_DLIMIT @ total size >= limit? bhs __flush_whole_cache @ flush whole D cache 1: tst r2, #VM_EXEC mcrne p15, 0, r0, c7, c5, 1 @ invalidate I line mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b tst r2, #VM_EXEC mcrne p15, 0, ip, c7, c5, 6 @ invalidate BTB mcrne p15, 0, ip, c7, c10, 4 @ data write barrier mcrne p15, 0, ip, c7, c5, 4 @ prefetch flush mov pc, lr /* * coherent_kern_range(start, end) * * Ensure coherency between the Icache and the Dcache in the * region described by start. If you have non-snooping * Harvard caches, you need to implement this function. * * - start - virtual start address * - end - virtual end address */ ENTRY(fa_coherent_kern_range) /* fall through */ /* * coherent_user_range(start, end) * * Ensure coherency between the Icache and the Dcache in the * region described by start. If you have non-snooping * Harvard caches, you need to implement this function. * * - start - virtual start address * - end - virtual end address */ ENTRY(fa_coherent_user_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D entry mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b mov r0, #0 mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mcr p15, 0, r0, c7, c5, 4 @ prefetch flush mov pc, lr /* * flush_kern_dcache_area(void *addr, size_t size) * * Ensure that the data held in the page kaddr is written back * to the page in question. * * - addr - kernel address * - size - size of region */ ENTRY(fa_flush_kern_dcache_area) add r1, r0, r1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b mov r0, #0 mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mov pc, lr /* * dma_inv_range(start, end) * * Invalidate (discard) the specified virtual address range. * May not write back any entries. If 'start' or 'end' * are not cache line aligned, those lines must be written * back. * * - start - virtual start address * - end - virtual end address */ fa_dma_inv_range: tst r0, #CACHE_DLINESIZE - 1 bic r0, r0, #CACHE_DLINESIZE - 1 mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry tst r1, #CACHE_DLINESIZE - 1 bic r1, r1, #CACHE_DLINESIZE - 1 mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D entry 1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mov pc, lr /* * dma_clean_range(start, end) * * Clean (write back) the specified virtual address range. * * - start - virtual start address * - end - virtual end address */ fa_dma_clean_range: bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mov pc, lr /* * dma_flush_range(start,end) * - start - virtual start address of region * - end - virtual end address of region */ ENTRY(fa_dma_flush_range) bic r0, r0, #CACHE_DLINESIZE - 1 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D entry add r0, r0, #CACHE_DLINESIZE cmp r0, r1 blo 1b mov r0, #0 mcr p15, 0, r0, c7, c10, 4 @ drain write buffer mov pc, lr /* * dma_map_area(start, size, dir) * - start - kernel virtual start address * - size - size of region * - dir - DMA direction */ ENTRY(fa_dma_map_area) add r1, r1, r0 cmp r2, #DMA_TO_DEVICE beq fa_dma_clean_range bcs fa_dma_inv_range b fa_dma_flush_range ENDPROC(fa_dma_map_area) /* * dma_unmap_area(start, size, dir) * - start - kernel virtual start address * - size - size of region * - dir - DMA direction */ ENTRY(fa_dma_unmap_area) mov pc, lr ENDPROC(fa_dma_unmap_area) .globl fa_flush_kern_cache_louis .equ fa_flush_kern_cache_louis, fa_flush_kern_cache_all __INITDATA @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) define_cache_functions fa