/*
* MPC8308RDB Device Tree Source
*
* Copyright 2009 Freescale Semiconductor Inc.
* Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
compatible = "fsl,mpc8308rdb";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8308@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x08000000>; // 128MB at 0
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
reg = <0xe0005000 0x1000>;
interrupts = <77 0x8>;
interrupt-parent = <&ipic>;
// CS0 and CS1 are swapped when
// booting from nand, but the
// addresses are the same.
ranges = <0x0 0x0 0xfe000000 0x00800000
0x1 0x0 0xe0600000 0x00002000
0x2 0x0 0xf0000000 0x00020000
0x3 0x0 0xfa000000 0x00008000>;
flash@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x800000>;
bank-width = <2>;
device-width = <1>;
u-boot@0 {
reg = <0x0 0x60000>;
read-only;
};
env@60000 {
reg = <0x60000 0x10000>;
};
env1@70000 {
reg = <0x70000 0x10000>;
};
kernel@80000 {
reg = <0x80000 0x200000>;
};
dtb@280000 {
reg = <0x280000 0x10000>;
};
ramdisk@290000 {
reg = <0x290000 0x570000>;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8315-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x1 0x0 0x2000>;
jffs2@0 {
reg = <0x0 0x2000000>;
};
};
};
immr@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8308-immr", "simple-bus";
ranges = <0 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>;
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x68>;
};
};
usb@23000 {
compatible = "fsl-usb2-dr";
reg = <0x23000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&ipic>;
interrupts = <38 0x8>;
dr_mode = "peripheral";
phy_type = "ulpi";
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x24000 0x1000>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi0 >;
phy-handle = < &phy2 >;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x2>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
tbi-handle = < &tbi1 >;
/* Vitesse 7385 isn't on the MDIO bus */
fixed-link = <1 1 1000 0 0>;
fsl,magic-packet;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <133333333>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <133333333>;
interrupts = <10 0x8>;
interrupt-parent = <&ipic>;
};
gpio@c00 {
#gpio-cells = <2>;
device_type = "gpio";
compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
reg = <0xc00 0x18>;
interrupts = <74 0x8>;
interrupt-parent = <&ipic>;
gpio-controller;
};
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
* sense == 8: Level, low assertion
* sense == 2: Edge, high-to-low change
*/
ipic: interrupt-controller@700 {
compatible = "fsl,ipic";
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x700 0x100>;
device_type = "ipic";
};
ipic-msi@7c0 {
compatible = "fsl,ipic-msi";
reg = <0x7c0 0x40>;
msi-available-ranges = <0x0 0x100>;
interrupts = < 0x43 0x8
0x4 0x8
0x51 0x8
0x52 0x8
0x56 0x8
0x57 0x8
0x58 0x8
0x59 0x8 >;
interrupt-parent = < &ipic >;
};
dma@2c000 {
compatible = "fsl,mpc8308-dma", "fsl,mpc5121-dma";
reg = <0x2c000 0x1800>;
interrupts = <3 0x8
94 0x8>;
interrupt-parent = < &ipic >;
};
};
pci0: pcie@e0009000 {
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
reg = <0xe0009000 0x00001000
0xb0000000 0x01000000>;
ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
bus-range = <0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0 0 0 1 &ipic 1 8
0 0 0 2 &ipic 1 8
0 0 0 3 &ipic 1 8
0 0 0 4 &ipic 1 8>;
interrupts = <0x1 0x8>;
interrupt-parent = <&ipic>;
clock-frequency = <0>;
pcie@0 {
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
reg = <0 0 0 0 0>;
ranges = <0x02000000 0 0xa0000000
0x02000000 0 0xa0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00800000>;
};
};
};