menuconfig FSL_SOC_BOOKE
	bool "Freescale Book-E Machine Type"
	depends on PPC_85xx || PPC_BOOK3E
	select FSL_SOC
	select PPC_UDBG_16550
	select MPIC
	select PPC_PCI_CHOICE
	select FSL_PCI if PCI
	select SERIAL_8250_EXTENDED if SERIAL_8250
	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
	default y

if FSL_SOC_BOOKE

if PPC32

config FSL_85XX_CACHE_SRAM
	bool
	select PPC_LIB_RHEAP
	help
	  When selected, this option enables cache-sram support
	  for memory allocation on P1/P2 QorIQ platforms.
	  cache-sram-size and cache-sram-offset kernel boot
	  parameters should be passed when this option is enabled.

config BSC9131_RDB
	bool "Freescale BSC9131RDB"
	select DEFAULT_UIMAGE
	help
	  This option enables support for the Freescale BSC9131RDB board.
	  The BSC9131 is a heterogeneous SoC containing an e500v2 powerpc and a
	  StarCore SC3850 DSP
	  Manufacturer : Freescale Semiconductor, Inc

config MPC8540_ADS
	bool "Freescale MPC8540 ADS"
	select DEFAULT_UIMAGE
	help
	  This option enables support for the MPC 8540 ADS board

config MPC8560_ADS
	bool "Freescale MPC8560 ADS"
	select DEFAULT_UIMAGE
	select CPM2
	help
	  This option enables support for the MPC 8560 ADS board

config MPC85xx_CDS
	bool "Freescale MPC85xx CDS"
	select DEFAULT_UIMAGE
	select PPC_I8259
	select HAS_RAPIDIO
	help
	  This option enables support for the MPC85xx CDS board

config MPC85xx_MDS
	bool "Freescale MPC85xx MDS"
	select DEFAULT_UIMAGE
	select PHYLIB
	select HAS_RAPIDIO
	select SWIOTLB
	help
	  This option enables support for the MPC85xx MDS board

config MPC8536_DS
	bool "Freescale MPC8536 DS"
	select DEFAULT_UIMAGE
	select SWIOTLB
	help
	  This option enables support for the MPC8536 DS board

config MPC85xx_DS
	bool "Freescale MPC85xx DS"
	select PPC_I8259
	select DEFAULT_UIMAGE
	select FSL_ULI1575 if PCI
	select SWIOTLB
	help
	  This option enables support for the MPC85xx DS (MPC8544 DS) board

config MPC85xx_RDB
	bool "Freescale MPC85xx RDB"
	select PPC_I8259
	select DEFAULT_UIMAGE
	select FSL_ULI1575 if PCI
	select SWIOTLB
	help
	  This option enables support for the MPC85xx RDB (P2020 RDB) board

config P1010_RDB
	bool "Freescale P1010RDB"
	select DEFAULT_UIMAGE
	help
	  This option enables support for the MPC85xx RDB (P1010 RDB) board

	  P1010RDB contains P1010Si, which provides CPU performance up to 800
	  MHz and 1600 DMIPS, additional functionality and faster interfaces
	  (DDR3/3L, SATA II, and PCI  Express).

config P1022_DS
	bool "Freescale P1022 DS"
	select DEFAULT_UIMAGE
	select SWIOTLB
	help
	  This option enables support for the Freescale P1022DS reference board.

config P1022_RDK
	bool "Freescale / iVeia P1022 RDK"
	select DEFAULT_UIMAGE
	help
	  This option enables support for the Freescale / iVeia P1022RDK
	  reference board.

config P1023_RDS
	bool "Freescale P1023 RDS"
	select DEFAULT_UIMAGE
	help
	  This option enables support for the P1023 RDS board

config SOCRATES
	bool "Socrates"
	select DEFAULT_UIMAGE
	help
	  This option enables support for the Socrates board.

config KSI8560
        bool "Emerson KSI8560"
        select DEFAULT_UIMAGE
        help
          This option enables support for the Emerson KSI8560 board

config XES_MPC85xx
	bool "X-ES single-board computer"
	select DEFAULT_UIMAGE
	help
	  This option enables support for the various single-board
	  computers from Extreme Engineering Solutions (X-ES) based on
	  Freescale MPC85xx processors.
	  Manufacturer: Extreme Engineering Solutions, Inc.
	  URL: <http://www.xes-inc.com/>

config STX_GP3
	bool "Silicon Turnkey Express GP3"
	help
	  This option enables support for the Silicon Turnkey Express GP3
	  board.
	select CPM2
	select DEFAULT_UIMAGE

config TQM8540
	bool "TQ Components TQM8540"
	help
	  This option enables support for the TQ Components TQM8540 board.
	select DEFAULT_UIMAGE
	select TQM85xx

config TQM8541
	bool "TQ Components TQM8541"
	help
	  This option enables support for the TQ Components TQM8541 board.
	select DEFAULT_UIMAGE
	select TQM85xx
	select CPM2

config TQM8548
	bool "TQ Components TQM8548"
	help
	  This option enables support for the TQ Components TQM8548 board.
	select DEFAULT_UIMAGE
	select TQM85xx

config TQM8555
	bool "TQ Components TQM8555"
	help
	  This option enables support for the TQ Components TQM8555 board.
	select DEFAULT_UIMAGE
	select TQM85xx
	select CPM2

config TQM8560
	bool "TQ Components TQM8560"
	help
	  This option enables support for the TQ Components TQM8560 board.
	select DEFAULT_UIMAGE
	select TQM85xx
	select CPM2

config SBC8548
	bool "Wind River SBC8548"
	select DEFAULT_UIMAGE
	help
	  This option enables support for the Wind River SBC8548 board

config PPA8548
	bool "Prodrive PPA8548"
	help
	  This option enables support for the Prodrive PPA8548 board.
	select DEFAULT_UIMAGE
	select HAS_RAPIDIO

config GE_IMP3A
	bool "GE Intelligent Platforms IMP3A"
	select DEFAULT_UIMAGE
	select SWIOTLB
	select MMIO_NVRAM
	select ARCH_REQUIRE_GPIOLIB
	select GE_FPGA
	help
	  This option enables support for the GE Intelligent Platforms IMP3A
	  board.

	  This board is a 3U CompactPCI Single Board Computer with a Freescale
	  P2020 processor.

config P2041_RDB
	bool "Freescale P2041 RDB"
	select DEFAULT_UIMAGE
	select PPC_E500MC
	select PHYS_64BIT
	select SWIOTLB
	select ARCH_REQUIRE_GPIOLIB
	select GPIO_MPC8XXX
	select HAS_RAPIDIO
	select PPC_EPAPR_HV_PIC
	help
	  This option enables support for the P2041 RDB board

config P3041_DS
	bool "Freescale P3041 DS"
	select DEFAULT_UIMAGE
	select PPC_E500MC
	select PHYS_64BIT
	select SWIOTLB
	select ARCH_REQUIRE_GPIOLIB
	select GPIO_MPC8XXX
	select HAS_RAPIDIO
	select PPC_EPAPR_HV_PIC
	help
	  This option enables support for the P3041 DS board

config P4080_DS
	bool "Freescale P4080 DS"
	select DEFAULT_UIMAGE
	select PPC_E500MC
	select PHYS_64BIT
	select SWIOTLB
	select ARCH_REQUIRE_GPIOLIB
	select GPIO_MPC8XXX
	select HAS_RAPIDIO
	select PPC_EPAPR_HV_PIC
	help
	  This option enables support for the P4080 DS board

config SGY_CTS1000
	tristate "Servergy CTS-1000 support"
	select GPIOLIB
	select OF_GPIO
	depends on P4080_DS
	help
	  Enable this to support functionality in Servergy's CTS-1000 systems.

endif # PPC32

config P5020_DS
	bool "Freescale P5020 DS"
	select DEFAULT_UIMAGE
	select E500
	select PPC_E500MC
	select PHYS_64BIT
	select SWIOTLB
	select ARCH_REQUIRE_GPIOLIB
	select GPIO_MPC8XXX
	select HAS_RAPIDIO
	select PPC_EPAPR_HV_PIC
	help
	  This option enables support for the P5020 DS board

config P5040_DS
	bool "Freescale P5040 DS"
	select DEFAULT_UIMAGE
	select E500
	select PPC_E500MC
	select PHYS_64BIT
	select SWIOTLB
	select ARCH_REQUIRE_GPIOLIB
	select GPIO_MPC8XXX
	select HAS_RAPIDIO
	select PPC_EPAPR_HV_PIC
	help
	  This option enables support for the P5040 DS board

config PPC_QEMU_E500
	bool "QEMU generic e500 platform"
	select DEFAULT_UIMAGE
	help
	  This option enables support for running as a QEMU guest using
	  QEMU's generic e500 machine.  This is not required if you're
	  using a QEMU machine that targets a specific board, such as
	  mpc8544ds.

	  Unlike most e500 boards that target a specific CPU, this
	  platform works with any e500-family CPU that QEMU supports.
	  Thus, you'll need to make sure CONFIG_PPC_E500MC is set or
	  unset based on the emulated CPU (or actual host CPU in the case
	  of KVM).

if PPC64

config T4240_QDS
	bool "Freescale T4240 QDS"
	select DEFAULT_UIMAGE
	select E500
	select PPC_E500MC
	select PHYS_64BIT
	select SWIOTLB
	select ARCH_REQUIRE_GPIOLIB
	select GPIO_MPC8XXX
	select HAS_RAPIDIO
	select PPC_EPAPR_HV_PIC
	help
	  This option enables support for the T4240 QDS board

config B4_QDS
	bool "Freescale B4 QDS"
	select DEFAULT_UIMAGE
	select E500
	select PPC_E500MC
	select PHYS_64BIT
	select SWIOTLB
	select GPIOLIB
	select ARCH_REQUIRE_GPIOLIB
	select HAS_RAPIDIO
	select PPC_EPAPR_HV_PIC
	help
	  This option enables support for the B4 QDS board
	  The B4 application development system B4 QDS is a complete
	  debugging environment intended for engineers developing
	  applications for the B4.

endif
endif # FSL_SOC_BOOKE

config TQM85xx
	bool