/* * June 2006 Steve Glendinning <steve.glendinning@shawell.net> * * Polaris-specific resource declaration * */ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/io.h> #include <asm/irq.h> #include <asm/machvec.h> #include <asm/heartbeat.h> #include <cpu/gpio.h> #include <mach-se/mach/se.h> #define BCR2 (0xFFFFFF62) #define WCR2 (0xFFFFFF66) #define AREA5_WAIT_CTRL (0x1C00) #define WAIT_STATES_10 (0x7) /* Dummy supplies, where voltage doesn't matter */ static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x.0"), REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), }; static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", .start = PA_EXT5, .end = PA_EXT5 + 0x1fff, .flags = IORESOURCE_MEM, }, [1] = { .name = "smsc911x-irq", .start = IRQ0_IRQ, .end = IRQ0_IRQ, .flags = IORESOURCE_IRQ, }, }; static struct smsc911x_platform_config smsc911x_config = { .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, .flags = SMSC911X_USE_32BIT, .phy_interface = PHY_INTERFACE_MODE_MII, }; static struct platform_device smsc911x_device = { .name = "smsc911x", .id = 0, .num_resources = ARRAY_SIZE(smsc911x_resources), .resource = smsc911x_resources, .dev = { .platform_data = &smsc911x_config, }, }; static unsigned char heartbeat_bit_pos[] = { 0, 1, 2, 3 }; static struct heartbeat_data heartbeat_data = { .bit_pos = heartbeat_bit_pos, .nr_bits = ARRAY_SIZE(heartbeat_bit_pos), }; static struct resource heartbeat_resource = { .start = PORT_PCDR, .end = PORT_PCDR, .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }; static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, .dev = { .platform_data = &heartbeat_data, }, .num_resources = 1, .resource = &heartbeat_resource, }; static struct platform_device *polaris_devices[] __initdata = { &smsc911x_device, &heartbeat_device, }; static int __init polaris_initialise(void) { u16 wcr, bcr_mask; printk(KERN_INFO "Configuring Polaris external bus\n"); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); /* Configure area 5 with 2 wait states */ wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); wcr |= (WAIT_STATES_10 << 10); __raw_writew(wcr, WCR2); /* Configure area 5 for 32-bit access */ bcr_mask = __raw_readw(BCR2); bcr_mask |= 1 << 10; __raw_writew(bcr_mask, BCR2); return platform_add_devices(polaris_devices, ARRAY_SIZE(polaris_devices)); } arch_initcall(polaris_initialise); static struct ipr_data ipr_irq_table[] = { /* External IRQs */ { IRQ0_IRQ, 0, 0, 1, }, /* IRQ0 */ { IRQ1_IRQ, 0, 4, 1, }, /* IRQ1 */ }; static unsigned long ipr_offsets[] = { INTC_IPRC }; static struct ipr_desc ipr_irq_desc = { .ipr_offsets = ipr_offsets, .nr_offsets = ARRAY_SIZE(ipr_offsets), .ipr_data = ipr_irq_table, .nr_irqs = ARRAY_SIZE(ipr_irq_table), .chip = { .name = "sh7709-ext", }, }; static void __init init_polaris_irq(void) { /* Disable all interrupts */ __raw_writew(0, BCR_ILCRA); __raw_writew(0, BCR_ILCRB); __raw_writew(0, BCR_ILCRC); __raw_writew(0, BCR_ILCRD); __raw_writew(0, BCR_ILCRE); __raw_writew(0, BCR_ILCRF); __raw_writew(0, BCR_ILCRG); register_ipr_controller(&ipr_irq_desc); } static struct sh_machine_vector mv_polaris __initmv = { .mv_name = "Polaris", .mv_init_irq = init_polaris_irq, };