/******************************************************************************
*
* Module Name: exoparg3 - AML execution - opcodes with 3 arguments
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acinterp.h"
#include "acparser.h"
#include "amlcode.h"
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exoparg3")
/*!
* Naming convention for AML interpreter execution routines.
*
* The routines that begin execution of AML opcodes are named with a common
* convention based upon the number of arguments, the number of target operands,
* and whether or not a value is returned:
*
* AcpiExOpcode_xA_yT_zR
*
* Where:
*
* xA - ARGUMENTS: The number of arguments (input operands) that are
* required for this opcode type (1 through 6 args).
* yT - TARGETS: The number of targets (output operands) that are required
* for this opcode type (0, 1, or 2 targets).
* zR - RETURN VALUE: Indicates whether this opcode type returns a value
* as the function return (0 or 1).
*
* The AcpiExOpcode* functions are called via the Dispatcher component with
* fully resolved operands.
!*/
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_3A_0T_0R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute Triadic operator (3 operands)
*
******************************************************************************/
acpi_status acpi_ex_opcode_3A_0T_0R(struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
struct acpi_signal_fatal_info *fatal;
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE_STR(ex_opcode_3A_0T_0R,
acpi_ps_get_opcode_name(walk_state->opcode));
switch (walk_state->opcode) {
case AML_FATAL_OP: /* Fatal (fatal_type fatal_code fatal_arg) */
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"FatalOp: Type %X Code %X Arg %X <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<\n",
(u32) operand[0]->integer.value,
(u32) operand[1]->integer.value,
(u32) operand[2]->integer.value));
fatal = ACPI_ALLOCATE(sizeof(struct acpi_signal_fatal_info));
if (fatal) {
fatal->type = (u32) operand[0]->integer.value;
fatal->code = (u32) operand[1]->integer.value;
fatal->argument = (u32) operand[2]->integer.value;
}
/* Always signal the OS! */
status = acpi_os_signal(ACPI_SIGNAL_FATAL, fatal);
/* Might return while OS is shutting down, just continue */
ACPI_FREE(fatal);
break;
default:
ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
cleanup:
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_3A_1T_1R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute Triadic operator (3 operands)
*
******************************************************************************/
acpi_status acpi_ex_opcode_3A_1T_1R(struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc = NULL;
char *buffer = NULL;
acpi_status status = AE_OK;
u64 index;
acpi_size length;
ACPI_FUNCTION_TRACE_STR(ex_opcode_3A_1T_1R,
acpi_ps_get_opcode_name(walk_state->opcode));
switch (walk_state->opcode) {
case AML_MID_OP: /* Mid (Source[0], Index[1], Length[2], Result[3]) */
/*
* Create the return object. The Source operand is guaranteed to be
* either a String or a Buffer, so just use its type.
*/
return_desc = acpi_ut_create_internal_object((operand[0])->
common.type);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/* Get the Integer values from the objects */
index = operand[1]->integer.value;
length = (acpi_size) operand[2]->integer.value;
/*
* If the index is beyond the length of the String/Buffer, or if the
* requested length is zero, return a zero-length String/Buffer
*/
if (index >= operand[0]->string.length) {
length = 0;
}
/* Truncate request if larger than the actual String/Buffer */
else if ((index + length) > operand[0]->string.length) {
length = (acpi_size) operand[0]->string.length -
(acpi_size) index;
}
/* Strings always have a sub-pointer, not so for buffers */
switch ((operand[0])->common.type) {
case ACPI_TYPE_STRING:
/* Always allocate a new buffer for the String */
buffer = ACPI_ALLOCATE_ZEROED((acpi_size) length + 1);
if (!buffer) {
status = AE_NO_MEMORY;
goto cleanup;
}
break;
case ACPI_TYPE_BUFFER:
/* If the requested length is zero, don't allocate a buffer */
if (length > 0) {
/* Allocate a new buffer for the Buffer */
buffer = ACPI_ALLOCATE_ZEROED(length);
if (!buffer) {
status = AE_NO_MEMORY;
goto cleanup;
}
}
break;
default: /* Should not happen */
status = AE_AML_OPERAND_TYPE;
goto cleanup;
}
if (buffer) {
/* We have a buffer, copy the portion requested */
ACPI_MEMCPY(buffer, operand[0]->string.pointer + index,
length);
}
/* Set the length of the new String/Buffer */
return_desc->string.pointer = buffer;
return_desc->string.length = (u32) length;
/* Mark buffer initialized */
return_desc->buffer.flags |= AOPOBJ_DATA_VALID;
break;
default:
ACPI_ERROR((AE_INFO, "Unknown AML opcode 0x%X",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
/* Store the result in the target */
status = acpi_ex_store(return_desc, operand[3], walk_state);
cleanup:
/* Delete return object on error */
if (ACPI_FAILURE(status) || walk_state->result_obj) {
acpi_ut_remove_reference(return_desc);
walk_state->result_obj = NULL;
}
/* Set the return object and exit */
else {
walk_state->result_obj = return_desc;
}
return_ACPI_STATUS(status);
}