/******************************************************************************
*
* Module Name: exstore - AML Interpreter object store support
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acdispat.h"
#include "acinterp.h"
#include "amlcode.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exstore")
/* Local prototypes */
static acpi_status
acpi_ex_store_object_to_index(union acpi_operand_object *val_desc,
union acpi_operand_object *dest_desc,
struct acpi_walk_state *walk_state);
/*******************************************************************************
*
* FUNCTION: acpi_ex_store
*
* PARAMETERS: *source_desc - Value to be stored
* *dest_desc - Where to store it. Must be an NS node
* or union acpi_operand_object of type
* Reference;
* walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Store the value described by source_desc into the location
* described by dest_desc. Called by various interpreter
* functions to store the result of an operation into
* the destination operand -- not just simply the actual "Store"
* ASL operator.
*
******************************************************************************/
acpi_status
acpi_ex_store(union acpi_operand_object *source_desc,
union acpi_operand_object *dest_desc,
struct acpi_walk_state *walk_state)
{
acpi_status status = AE_OK;
union acpi_operand_object *ref_desc = dest_desc;
ACPI_FUNCTION_TRACE_PTR(ex_store, dest_desc);
/* Validate parameters */
if (!source_desc || !dest_desc) {
ACPI_ERROR((AE_INFO, "Null parameter"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
/* dest_desc can be either a namespace node or an ACPI object */
if (ACPI_GET_DESCRIPTOR_TYPE(dest_desc) == ACPI_DESC_TYPE_NAMED) {
/*
* Dest is a namespace node,
* Storing an object into a Named node.
*/
status = acpi_ex_store_object_to_node(source_desc,
(struct
acpi_namespace_node *)
dest_desc, walk_state,
ACPI_IMPLICIT_CONVERSION);
return_ACPI_STATUS(status);
}
/* Destination object must be a Reference or a Constant object */
switch (dest_desc->common.type) {
case ACPI_TYPE_LOCAL_REFERENCE:
break;
case ACPI_TYPE_INTEGER:
/* Allow stores to Constants -- a Noop as per ACPI spec */
if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) {
return_ACPI_STATUS(AE_OK);
}
/*lint -fallthrough */
default:
/* Destination is not a Reference object */
ACPI_ERROR((AE_INFO,
"Target is not a Reference or Constant object - %s [%p]",
acpi_ut_get_object_type_name(dest_desc),
dest_desc));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/*
* Examine the Reference class. These cases are handled:
*
* 1) Store to Name (Change the object associated with a name)
* 2) Store to an indexed area of a Buffer or Package
* 3) Store to a Method Local or Arg
* 4) Store to the debug object
*/
switch (ref_desc->reference.class) {
case ACPI_REFCLASS_REFOF:
/* Storing an object into a Name "container" */
status = acpi_ex_store_object_to_node(source_desc,
ref_desc->reference.
object, walk_state,
ACPI_IMPLICIT_CONVERSION);
break;
case ACPI_REFCLASS_INDEX:
/* Storing to an Index (pointer into a packager or buffer) */
status =
acpi_ex_store_object_to_index(source_desc, ref_desc,
walk_state);
break;
case ACPI_REFCLASS_LOCAL:
case ACPI_REFCLASS_ARG:
/* Store to a method local/arg */
status =
acpi_ds_store_object_to_local(ref_desc->reference.class,
ref_desc->reference.value,
source_desc, walk_state);
break;
case ACPI_REFCLASS_DEBUG:
/*
* Storing to the Debug object causes the value stored to be
* displayed and otherwise has no effect -- see ACPI Specification
*/
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"**** Write to Debug Object: Object %p %s ****:\n\n",
source_desc,
acpi_ut_get_object_type_name(source_desc)));
ACPI_DEBUG_OBJECT(source_desc, 0, 0);
break;
default:
ACPI_ERROR((AE_INFO, "Unknown Reference Class 0x%2.2X",
ref_desc->reference.class));
ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_INFO);
status = AE_AML_INTERNAL;
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_store_object_to_index
*
* PARAMETERS: *source_desc - Value to be stored
* *dest_desc - Named object to receive the value
* walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Store the object to indexed Buffer or Package element
*
******************************************************************************/
static acpi_status
acpi_ex_store_object_to_index(union acpi_operand_object *source_desc,
union acpi_operand_object *index_desc,
struct acpi_walk_state *walk_state)
{
acpi_status status = AE_OK;
union acpi_operand_object *obj_desc;
union acpi_operand_object *new_desc;
u8 value = 0;
u32 i;
ACPI_FUNCTION_TRACE(ex_store_object_to_index);
/*
* Destination must be a reference pointer, and
* must point to either a buffer or a package
*/
switch (index_desc->reference.target_type) {
case ACPI_TYPE_PACKAGE:
/*
* Storing to a package element. Copy the object and replace
* any existing object with the new object. No implicit
* conversion is performed.
*
* The object at *(index_desc->Reference.Where) is the
* element within the package that is to be modified.
* The parent package object is at index_desc->Reference.Object
*/
obj_desc = *(index_desc->reference.where);
if (source_desc->common.type == ACPI_TYPE_LOCAL_REFERENCE &&
source_desc->reference.class == ACPI_REFCLASS_TABLE) {
/* This is a DDBHandle, just add a reference to it */
acpi_ut_add_reference(source_desc);
new_desc = source_desc;
} else {
/* Normal object, copy it */
status =
acpi_ut_copy_iobject_to_iobject(source_desc,
&new_desc,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
if (obj_desc) {
/* Decrement reference count by the ref count of the parent package */
for (i = 0; i < ((union acpi_operand_object *)
index_desc->reference.object)->common.
reference_count; i++) {
acpi_ut_remove_reference(obj_desc);
}
}
*(index_desc->reference.where) = new_desc;
/* Increment ref count by the ref count of the parent package-1 */
for (i = 1; i < ((union acpi_operand_object *)
index_desc->reference.object)->common.
reference_count; i++) {
acpi_ut_add_reference(new_desc);
}
break;
case ACPI_TYPE_BUFFER_FIELD:
/*
* Store into a Buffer or String (not actually a real buffer_field)
* at a location defined by an Index.
*
* The first 8-bit element of the source object is written to the
* 8-bit Buffer location defined by the Index destination object,
* according to the ACPI 2.0 specification.
*/
/*
* Make sure the target is a Buffer or String. An error should
* not happen here, since the reference_object was constructed
* by the INDEX_OP code.
*/
obj_desc = index_desc->reference.object;
if ((obj_desc->common.type != ACPI_TYPE_BUFFER) &&
(obj_desc->common.type != ACPI_TYPE_STRING)) {
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/*
* The assignment of the individual elements will be slightly
* different for each source type.
*/
switch (source_desc->common.type) {
case ACPI_TYPE_INTEGER:
/* Use the least-significant byte of the integer */
value = (u8) (source_desc->integer.value);
break;
case ACPI_TYPE_BUFFER:
case ACPI_TYPE_STRING:
/* Note: Takes advantage of common string/buffer fields */
value = source_desc->buffer.pointer[0];
break;
default:
/* All other types are invalid */
ACPI_ERROR((AE_INFO,
"Source must be Integer/Buffer/String type, not %s",
acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/* Store the source value into the target buffer byte */
obj_desc->buffer.pointer[index_desc->reference.value] = value;
break;
default:
ACPI_ERROR((AE_INFO, "Target is not a Package or BufferField"));
status = AE_AML_OPERAND_TYPE;
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_store_object_to_node
*
* PARAMETERS: source_desc - Value to be stored
* node - Named object to receive the value
* walk_state - Current walk state
* implicit_conversion - Perform implicit conversion (yes/no)
*
* RETURN: Status
*
* DESCRIPTION: Store the object to the named object.
*
* The Assignment of an object to a named object is handled here
* The value passed in will replace the current value (if any)
* with the input value.
*
* When storing into an object the data is converted to the
* target object type then stored in the object. This means
* that the target object type (for an initialized target) will
* not be changed by a store operation.
*
* Assumes parameters are already validated.
*
******************************************************************************/
acpi_status
acpi_ex_store_object_to_node(union acpi_operand_object *source_desc,
struct acpi_namespace_node *node,
struct acpi_walk_state *walk_state,
u8 implicit_conversion)
{
acpi_status status = AE_OK;
union acpi_operand_object *target_desc;
union acpi_operand_object *new_desc;
acpi_object_type target_type;
ACPI_FUNCTION_TRACE_PTR(ex_store_object_to_node, source_desc);
/* Get current type of the node, and object attached to Node */
target_type = acpi_ns_get_type(node);
target_desc = acpi_ns_get_attached_object(node);
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n",
source_desc,
acpi_ut_get_object_type_name(source_desc), node,
acpi_ut_get_type_name(target_type)));
/*
* Resolve the source object to an actual value
* (If it is a reference object)
*/
status = acpi_ex_resolve_object(&source_desc, target_type, walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* If no implicit conversion, drop into the default case below */
if ((!implicit_conversion) ||
((walk_state->opcode == AML_COPY_OP) &&
(target_type != ACPI_TYPE_LOCAL_REGION_FIELD) &&
(target_type != ACPI_TYPE_LOCAL_BANK_FIELD) &&
(target_type != ACPI_TYPE_LOCAL_INDEX_FIELD))) {
/*
* Force execution of default (no implicit conversion). Note:
* copy_object does not perform an implicit conversion, as per the ACPI
* spec -- except in case of region/bank/index fields -- because these
* objects must retain their original type permanently.
*/
target_type = ACPI_TYPE_ANY;
}
/* Do the actual store operation */
switch (target_type) {
case ACPI_TYPE_BUFFER_FIELD:
case ACPI_TYPE_LOCAL_REGION_FIELD:
case ACPI_TYPE_LOCAL_BANK_FIELD:
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* For fields, copy the source data to the target field. */
status = acpi_ex_write_data_to_field(source_desc, target_desc,
&walk_state->result_obj);
break;
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
/*
* These target types are all of type Integer/String/Buffer, and
* therefore support implicit conversion before the store.
*
* Copy and/or convert the source object to a new target object
*/
status =
acpi_ex_store_object_to_object(source_desc, target_desc,
&new_desc, walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (new_desc != target_desc) {
/*
* Store the new new_desc as the new value of the Name, and set
* the Name's type to that of the value being stored in it.
* source_desc reference count is incremented by attach_object.
*
* Note: This may change the type of the node if an explicit store
* has been performed such that the node/object type has been
* changed.
*/
status =
acpi_ns_attach_object(node, new_desc,
new_desc->common.type);
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Store %s into %s via Convert/Attach\n",
acpi_ut_get_object_type_name
(source_desc),
acpi_ut_get_object_type_name
(new_desc)));
}
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Storing [%s] (%p) directly into node [%s] (%p)"
" with no implicit conversion\n",
acpi_ut_get_object_type_name(source_desc),
source_desc,
acpi_ut_get_object_type_name(target_desc),
node));
/*
* No conversions for all other types. Directly store a copy of
* the source object. NOTE: This is a departure from the ACPI
* spec, which states "If conversion is impossible, abort the
* running control method".
*
* This code implements "If conversion is impossible, treat the
* Store operation as a CopyObject".
*/
status =
acpi_ut_copy_iobject_to_iobject(source_desc, &new_desc,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status =
acpi_ns_attach_object(node, new_desc,
new_desc->common.type);
acpi_ut_remove_reference(new_desc);
break;
}
return_ACPI_STATUS(status);
}