/* * SMBus 2.0 driver for AMD-8111 IO-Hub. * * Copyright (c) 2002 Vojtech Pavlik * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation version 2. */ #include <linux/module.h> #include <linux/pci.h> #include <linux/kernel.h> #include <linux/stddef.h> #include <linux/ioport.h> #include <linux/init.h> #include <linux/i2c.h> #include <linux/delay.h> #include <linux/acpi.h> #include <linux/slab.h> #include <linux/io.h> MODULE_LICENSE("GPL"); MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>"); MODULE_DESCRIPTION("AMD8111 SMBus 2.0 driver"); struct amd_smbus { struct pci_dev *dev; struct i2c_adapter adapter; int base; int size; }; static struct pci_driver amd8111_driver; /* * AMD PCI control registers definitions. */ #define AMD_PCI_MISC 0x48 #define AMD_PCI_MISC_SCI 0x04 /* deliver SCI */ #define AMD_PCI_MISC_INT 0x02 /* deliver PCI IRQ */ #define AMD_PCI_MISC_SPEEDUP 0x01 /* 16x clock speedup */ /* * ACPI 2.0 chapter 13 PCI interface definitions. */ #define AMD_EC_DATA 0x00 /* data register */ #define AMD_EC_SC 0x04 /* status of controller */ #define AMD_EC_CMD 0x04 /* command register */ #define AMD_EC_ICR 0x08 /* interrupt control register */ #define AMD_EC_SC_SMI 0x04 /* smi event pending */ #define AMD_EC_SC_SCI 0x02 /* sci event pending */ #define AMD_EC_SC_BURST 0x01 /* burst mode enabled */ #define AMD_EC_SC_CMD 0x08 /* byte in data reg is command */ #define AMD_EC_SC_IBF 0x02 /* data ready for embedded controller */ #define AMD_EC_SC_OBF 0x01 /* data ready for host */ #define AMD_EC_CMD_RD 0x80 /* read EC */ #define AMD_EC_CMD_WR 0x81 /* write EC */ #define AMD_EC_CMD_BE 0x82 /* enable burst mode */ #define AMD_EC_CMD_BD 0x83 /* disable burst mode */ #define AMD_EC_CMD_QR 0x84 /* query EC */ /* * ACPI 2.0 chapter 13 access of registers of the EC */ static int amd_ec_wait_write(struct amd_smbus *smbus) { int timeout = 500; while ((inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF) && --timeout) udelay(1); if (!timeout) { dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n"); return -ETIMEDOUT; } return 0; } static int amd_ec_wait_read(struct amd_smbus *smbus) { int timeout = 500; while ((~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF) && --timeout) udelay(1); if (!timeout) { dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n"); return -ETIMEDOUT; } return 0; } static int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data) { int status; status = amd_ec_wait_write(smbus); if (status) return status; outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD); status = amd_ec_wait_write(smbus); if (status) return status; outb(address, smbus->base + AMD_EC_DATA); status = amd_ec_wait_read(smbus); if (status) return status; *data = inb(smbus->base + AMD_EC_DATA); return 0; } static int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data) { int status; status = amd_ec_wait_write(smbus); if (status) return status; outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD); status = amd_ec_wait_write(smbus); if (status) return status; outb(address, smbus->base + AMD_EC_DATA); status = amd_ec_wait_write(smbus); if (status) return status; outb(data, smbus->base + AMD_EC_DATA); return 0; } /* * ACPI 2.0 chapter 13 SMBus 2.0 EC register model */ #define AMD_SMB_PRTCL 0x00 /* protocol, PEC */ #define AMD_SMB_STS 0x01 /* status */ #define AMD_SMB_ADDR 0x02 /* address */ #define AMD_SMB_CMD 0x03 /* command */ #define AMD_SMB_DATA 0x04 /* 32 data registers */ #define AMD_SMB_BCNT 0x24 /* number of data bytes */ #define AMD_SMB_ALRM_A 0x25 /* alarm address */ #define AMD_SMB_ALRM_D 0x26 /* 2 bytes alarm data */ #define AMD_SMB_STS_DONE 0x80 #define AMD_SMB_STS_ALRM 0x40 #define AMD_SMB_STS_RES 0x20 #define AMD_SMB_STS_STATUS 0x1f #define AMD_SMB_STATUS_OK 0x00 #define AMD_SMB_STATUS_FAIL 0x07 #define AMD_SMB_STATUS_DNAK 0x10 #define AMD_SMB_STATUS_DERR 0x11 #define AMD_SMB_STATUS_CMD_DENY 0x12 #define AMD_SMB_STATUS_UNKNOWN 0x13 #define AMD_SMB_STATUS_ACC_DENY 0x17 #define AMD_SMB_STATUS_TIMEOUT 0x18 #define AMD_SMB_STATUS_NOTSUP 0x19 #define AMD_SMB_STATUS_BUSY 0x1A #define AMD_SMB_STATUS_PEC 0x1F #define AMD_SMB_PRTCL_WRITE 0x00 #define AMD_SMB_PRTCL_READ 0x01 #define AMD_SMB_PRTCL_QUICK 0x02 #define AMD_SMB_PRTCL_BYTE 0x04 #define AMD_SMB_PRTCL_BYTE_DATA 0x06 #define AMD_SMB_PRTCL_WORD_DATA 0x08 #define AMD_SMB_PRTCL_BLOCK_DATA 0x0a #define AMD_SMB_PRTCL_PROC_CALL 0x0c #define AMD_SMB_PRTCL_BLOCK_PROC_CALL 0x0d #define AMD_SMB_PRTCL_I2C_BLOCK_DATA 0x4a #define AMD_SMB_PRTCL_PEC 0x80 static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { struct amd_smbus *smbus = adap->algo_data; unsigned char protocol, len, pec, temp[2]; int i, status; protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ : AMD_SMB_PRTCL_WRITE; pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0; switch (size) { case I2C_SMBUS_QUICK: protocol |= AMD_SMB_PRTCL_QUICK; read_write = I2C_SMBUS_WRITE; break; case I2C_SMBUS_BYTE: if (read_write == I2C_SMBUS_WRITE) { status = amd_ec_write(smbus, AMD_SMB_CMD, command); if (status) return status; } protocol |= AMD_SMB_PRTCL_BYTE; break; case I2C_SMBUS_BYTE_DATA: status = amd_ec_write(smbus, AMD_SMB_CMD, command); if (status) return status; if (read_write == I2C_SMBUS_WRITE) { status = amd_ec_write(smbus, AMD_SMB_DATA, data->byte); if (status) return status; } protocol |= AMD_SMB_PRTCL_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: status = amd_ec_write(smbus, AMD_SMB_CMD, command); if (status) return status; if (read_write == I2C_SMBUS_WRITE) { status = amd_ec_write(smbus, AMD_SMB_DATA, data->word & 0xff); if (status) return status; status = amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); if (status) return status; } protocol |= AMD_SMB_PRTCL_WORD_DATA | pec; break; case I2C_SMBUS_BLOCK_DATA: status = amd_ec_write(smbus, AMD_SMB_CMD, command); if (status) return status; if (read_write == I2C_SMBUS_WRITE) { len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX); status = amd_ec_write(smbus, AMD_SMB_BCNT, len); if (status) return status; for (i = 0; i < len; i++) { status = amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); if (status) return status; } } protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec; break; case I2C_SMBUS_I2C_BLOCK_DATA: len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX); status = amd_ec_write(smbus, AMD_SMB_CMD, command); if (status) return status; status = amd_ec_write(smbus, AMD_SMB_BCNT, len); if (status) return status; if (read_write == I2C_SMBUS_WRITE) for (i = 0; i < len; i++) { status = amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); if (status) return status; } protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA; break; case I2C_SMBUS_PROC_CALL: status = amd_ec_write(smbus, AMD_SMB_CMD, command); if (status) return status; status = amd_ec_write(smbus, AMD_SMB_DATA, data->word & 0xff); if (status) return status; status = amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); if (status) return status; protocol = AMD_SMB_PRTCL_PROC_CALL | pec; read_write = I2C_SMBUS_READ; break; case I2C_SMBUS_BLOCK_PROC_CALL: len = min_t(u8, data->block[0], I2C_SMBUS_BLOCK_MAX - 1); status = amd_ec_write(smbus, AMD_SMB_CMD, command); if (status) return status; status = amd_ec_write(smbus, AMD_SMB_BCNT, len); if (status) return status; for (i = 0; i < len; i++) { status = amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); if (status) return status; } protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec; read_write = I2C_SMBUS_READ; break; default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); return -EOPNOTSUPP; } status = amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1); if (status) return status; status = amd_ec_write(smbus, AMD_SMB_PRTCL, protocol); if (status) return status; status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0); if (status) return status; if (~temp[0] & AMD_SMB_STS_DONE) { udelay(500); status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0); if (status) return status; } if (~temp[0] & AMD_SMB_STS_DONE) { msleep(1); status = amd_ec_read(smbus, AMD_SMB_STS, temp + 0); if (status) return status; } if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS)) return -EIO; if (read_write == I2C_SMBUS_WRITE) return 0; switch (size) { case I2C_SMBUS_BYTE: case I2C_SMBUS_BYTE_DATA: status = amd_ec_read(smbus, AMD_SMB_DATA, &data->byte); if (status) return status; break; case I2C_SMBUS_WORD_DATA: case I2C_SMBUS_PROC_CALL: status = amd_ec_read(smbus, AMD_SMB_DATA, temp + 0); if (status) return status; status = amd_ec_read(smbus, AMD_SMB_DATA + 1, temp + 1); if (status) return status; data->word = (temp[1] << 8) | temp[0]; break; case I2C_SMBUS_BLOCK_DATA: case I2C_SMBUS_BLOCK_PROC_CALL: status = amd_ec_read(smbus, AMD_SMB_BCNT, &len); if (status) return status; len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX); case I2C_SMBUS_I2C_BLOCK_DATA: for (i = 0; i < len; i++) { status = amd_ec_read(smbus, AMD_SMB_DATA + i, data->block + i + 1); if (status) return status; } data->block[0] = len; break; } return 0; } static u32 amd8111_func(struct i2c_adapter *adapter) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_PEC; } static const struct i2c_algorithm smbus_algorithm = { .smbus_xfer = amd8111_access, .functionality = amd8111_func, }; static DEFINE_PCI_DEVICE_TABLE(amd8111_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) }, { 0, } }; MODULE_DEVICE_TABLE (pci, amd8111_ids); static int amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id) { struct amd_smbus *smbus; int error; if (!(pci_resource_flags(dev, 0) & IORESOURCE_IO)) return -ENODEV; smbus = kzalloc(sizeof(struct amd_smbus), GFP_KERNEL); if (!smbus) return -ENOMEM; smbus->dev = dev; smbus->base = pci_resource_start(dev, 0); smbus->size = pci_resource_len(dev, 0); error = acpi_check_resource_conflict(&dev->resource[0]); if (error) { error = -ENODEV; goto out_kfree; } if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) { error = -EBUSY; goto out_kfree; } smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "SMBus2 AMD8111 adapter at %04x", smbus->base); smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; /* set up the sysfs linkage to our parent device */ smbus->adapter.dev.parent = &dev->dev; pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); error = i2c_add_adapter(&smbus->adapter); if (error) goto out_release_region; pci_set_drvdata(dev, smbus); return 0; out_release_region: release_region(smbus->base, smbus->size); out_kfree: kfree(smbus); return error; } static void amd8111_remove(struct pci_dev *dev) { struct amd_smbus *smbus = pci_get_drvdata(dev); i2c_del_adapter(&smbus->adapter); release_region(smbus->base, smbus->size); kfree(smbus); } static struct pci_driver amd8111_driver = { .name = "amd8111_smbus2", .id_table = amd8111_ids, .probe = amd8111_probe, .remove = amd8111_remove, }; module_pci_driver(amd8111_driver);