/* * ALPS touchpad PS/2 mouse driver * * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au> * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com> * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru> * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> * Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net> * * ALPS detection, tap switching and status querying info is taken from * tpconfig utility (by C. Scott Ananian and Bruce Kall). * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published by * the Free Software Foundation. */ #include <linux/slab.h> #include <linux/input.h> #include <linux/input/mt.h> #include <linux/serio.h> #include <linux/libps2.h> #include "psmouse.h" #include "alps.h" /* * Definitions for ALPS version 3 and 4 command mode protocol */ #define ALPS_CMD_NIBBLE_10 0x01f2 #define ALPS_REG_BASE_RUSHMORE 0xc2c0 #define ALPS_REG_BASE_PINNACLE 0x0000 static const struct alps_nibble_commands alps_v3_nibble_commands[] = { { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */ { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */ { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */ { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */ { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */ { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */ { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */ { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */ { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */ { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */ { PSMOUSE_CMD_SETRES, 0x00 }, /* b */ { PSMOUSE_CMD_SETRES, 0x01 }, /* c */ { PSMOUSE_CMD_SETRES, 0x02 }, /* d */ { PSMOUSE_CMD_SETRES, 0x03 }, /* e */ { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ }; static const struct alps_nibble_commands alps_v4_nibble_commands[] = { { PSMOUSE_CMD_ENABLE, 0x00 }, /* 0 */ { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ { PSMOUSE_CMD_SETSCALE21, 0x00 }, /* 2 */ { PSMOUSE_CMD_SETRATE, 0x0a }, /* 3 */ { PSMOUSE_CMD_SETRATE, 0x14 }, /* 4 */ { PSMOUSE_CMD_SETRATE, 0x28 }, /* 5 */ { PSMOUSE_CMD_SETRATE, 0x3c }, /* 6 */ { PSMOUSE_CMD_SETRATE, 0x50 }, /* 7 */ { PSMOUSE_CMD_SETRATE, 0x64 }, /* 8 */ { PSMOUSE_CMD_SETRATE, 0xc8 }, /* 9 */ { ALPS_CMD_NIBBLE_10, 0x00 }, /* a */ { PSMOUSE_CMD_SETRES, 0x00 }, /* b */ { PSMOUSE_CMD_SETRES, 0x01 }, /* c */ { PSMOUSE_CMD_SETRES, 0x02 }, /* d */ { PSMOUSE_CMD_SETRES, 0x03 }, /* e */ { PSMOUSE_CMD_SETSCALE11, 0x00 }, /* f */ }; #define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */ #define ALPS_PASS 0x04 /* device has a pass-through port */ #define ALPS_WHEEL 0x08 /* hardware wheel present */ #define ALPS_FW_BK_1 0x10 /* front & back buttons present */ #define ALPS_FW_BK_2 0x20 /* front & back buttons present */ #define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */ #define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with 6-byte ALPS packet */ static const struct alps_model_info alps_model_data[] = { { { 0x32, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */ { { 0x33, 0x02, 0x0a }, 0x00, ALPS_PROTO_V1, 0x88, 0xf8, 0 }, /* UMAX-530T */ { { 0x53, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, { { 0x53, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, { { 0x60, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, /* HP ze1115 */ { { 0x63, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, { { 0x63, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, { { 0x63, 0x02, 0x28 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Fujitsu Siemens S6010 */ { { 0x63, 0x02, 0x3c }, 0x00, ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL }, /* Toshiba Satellite S2400-103 */ { { 0x63, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 }, /* NEC Versa L320 */ { { 0x63, 0x02, 0x64 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, { { 0x63, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */ { { 0x73, 0x00, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT }, /* ThinkPad R61 8918-5QG */ { { 0x73, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 }, { { 0x73, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 }, /* Ahtec Laptop */ { { 0x20, 0x02, 0x0e }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */ { { 0x22, 0x02, 0x0a }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, { { 0x22, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */ /* Dell Latitude E5500, E6400, E6500, Precision M4400 */ { { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, { { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */ { { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED }, /* Toshiba Tecra A11-11L */ { { 0x73, 0x02, 0x64 }, 0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 }, }; static void alps_set_abs_params_st(struct alps_data *priv, struct input_dev *dev1); static void alps_set_abs_params_mt(struct alps_data *priv, struct input_dev *dev1); /* * XXX - this entry is suspicious. First byte has zero lower nibble, * which is what a normal mouse would report. Also, the value 0x0e * isn't valid per PS/2 spec. */ /* Packet formats are described in Documentation/input/alps.txt */ static bool alps_is_valid_first_byte(struct alps_data *priv, unsigned char data) { return (data & priv->mask0) == priv->byte0; } static void alps_report_buttons(struct psmouse *psmouse, struct input_dev *dev1, struct input_dev *dev2, int left, int right, int middle) { struct input_dev *dev; /* * If shared button has already been reported on the * other device (dev2) then this event should be also * sent through that device. */ dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1; input_report_key(dev, BTN_LEFT, left); dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1; input_report_key(dev, BTN_RIGHT, right); dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1; input_report_key(dev, BTN_MIDDLE, middle); /* * Sync the _other_ device now, we'll do the first * device later once we report the rest of the events. */ input_sync(dev2); } static void alps_process_packet_v1_v2(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; struct input_dev *dev2 = priv->dev2; int x, y, z, ges, fin, left, right, middle; int back = 0, forward = 0; if (priv->proto_version == ALPS_PROTO_V1) { left = packet[2] & 0x10; right = packet[2] & 0x08; middle = 0; x = packet[1] | ((packet[0] & 0x07) << 7); y = packet[4] | ((packet[3] & 0x07) << 7); z = packet[5]; } else { left = packet[3] & 1; right = packet[3] & 2; middle = packet[3] & 4; x = packet[1] | ((packet[2] & 0x78) << (7 - 3)); y = packet[4] | ((packet[3] & 0x70) << (7 - 4)); z = packet[5]; } if (priv->flags & ALPS_FW_BK_1) { back = packet[0] & 0x10; forward = packet[2] & 4; } if (priv->flags & ALPS_FW_BK_2) { back = packet[3] & 4; forward = packet[2] & 4; if ((middle = forward && back)) forward = back = 0; } ges = packet[2] & 1; fin = packet[2] & 2; if ((priv->flags & ALPS_DUALPOINT) && z == 127) { input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x)); input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y)); alps_report_buttons(psmouse, dev2, dev, left, right, middle); input_sync(dev2); return; } alps_report_buttons(psmouse, dev, dev2, left, right, middle); /* Convert hardware tap to a reasonable Z value */ if (ges && !fin) z = 40; /* * A "tap and drag" operation is reported by the hardware as a transition * from (!fin && ges) to (fin && ges). This should be translated to the * sequence Z>0, Z==0, Z>0, so the Z==0 event has to be generated manually. */ if (ges && fin && !priv->prev_fin) { input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); input_report_abs(dev, ABS_PRESSURE, 0); input_report_key(dev, BTN_TOOL_FINGER, 0); input_sync(dev); } priv->prev_fin = fin; if (z > 30) input_report_key(dev, BTN_TOUCH, 1); if (z < 25) input_report_key(dev, BTN_TOUCH, 0); if (z > 0) { input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); } input_report_abs(dev, ABS_PRESSURE, z); input_report_key(dev, BTN_TOOL_FINGER, z > 0); if (priv->flags & ALPS_WHEEL) input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07)); if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { input_report_key(dev, BTN_FORWARD, forward); input_report_key(dev, BTN_BACK, back); } if (priv->flags & ALPS_FOUR_BUTTONS) { input_report_key(dev, BTN_0, packet[2] & 4); input_report_key(dev, BTN_1, packet[0] & 0x10); input_report_key(dev, BTN_2, packet[3] & 4); input_report_key(dev, BTN_3, packet[0] & 0x20); } input_sync(dev); } /* * Process bitmap data from v3 and v4 protocols. Returns the number of * fingers detected. A return value of 0 means at least one of the * bitmaps was empty. * * The bitmaps don't have enough data to track fingers, so this function * only generates points representing a bounding box of all contacts. * These points are returned in x1, y1, x2, and y2 when the return value * is greater than 0. */ static int alps_process_bitmap(struct alps_data *priv, unsigned int x_map, unsigned int y_map, int *x1, int *y1, int *x2, int *y2) { struct alps_bitmap_point { int start_bit; int num_bits; }; int fingers_x = 0, fingers_y = 0, fingers; int i, bit, prev_bit; struct alps_bitmap_point x_low = {0,}, x_high = {0,}; struct alps_bitmap_point y_low = {0,}, y_high = {0,}; struct alps_bitmap_point *point; if (!x_map || !y_map) return 0; *x1 = *y1 = *x2 = *y2 = 0; prev_bit = 0; point = &x_low; for (i = 0; x_map != 0; i++, x_map >>= 1) { bit = x_map & 1; if (bit) { if (!prev_bit) { point->start_bit = i; fingers_x++; } point->num_bits++; } else { if (prev_bit) point = &x_high; else point->num_bits = 0; } prev_bit = bit; } /* * y bitmap is reversed for what we need (lower positions are in * higher bits), so we process from the top end. */ y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - priv->y_bits); prev_bit = 0; point = &y_low; for (i = 0; y_map != 0; i++, y_map <<= 1) { bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1)); if (bit) { if (!prev_bit) { point->start_bit = i; fingers_y++; } point->num_bits++; } else { if (prev_bit) point = &y_high; else point->num_bits = 0; } prev_bit = bit; } /* * Fingers can overlap, so we use the maximum count of fingers * on either axis as the finger count. */ fingers = max(fingers_x, fingers_y); /* * If total fingers is > 1 but either axis reports only a single * contact, we have overlapping or adjacent fingers. For the * purposes of creating a bounding box, divide the single contact * (roughly) equally between the two points. */ if (fingers > 1) { if (fingers_x == 1) { i = x_low.num_bits / 2; x_low.num_bits = x_low.num_bits - i; x_high.start_bit = x_low.start_bit + i; x_high.num_bits = max(i, 1); } else if (fingers_y == 1) { i = y_low.num_bits / 2; y_low.num_bits = y_low.num_bits - i; y_high.start_bit = y_low.start_bit + i; y_high.num_bits = max(i, 1); } } *x1 = (priv->x_max * (2 * x_low.start_bit + x_low.num_bits - 1)) / (2 * (priv->x_bits - 1)); *y1 = (priv->y_max * (2 * y_low.start_bit + y_low.num_bits - 1)) / (2 * (priv->y_bits - 1)); if (fingers > 1) { *x2 = (priv->x_max * (2 * x_high.start_bit + x_high.num_bits - 1)) / (2 * (priv->x_bits - 1)); *y2 = (priv->y_max * (2 * y_high.start_bit + y_high.num_bits - 1)) / (2 * (priv->y_bits - 1)); } return fingers; } static void alps_set_slot(struct input_dev *dev, int slot, bool active, int x, int y) { input_mt_slot(dev, slot); input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); if (active) { input_report_abs(dev, ABS_MT_POSITION_X, x); input_report_abs(dev, ABS_MT_POSITION_Y, y); } } static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers, int x1, int y1, int x2, int y2) { alps_set_slot(dev, 0, num_fingers != 0, x1, y1); alps_set_slot(dev, 1, num_fingers == 2, x2, y2); } static void alps_process_trackstick_packet_v3(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; struct input_dev *dev = priv->dev2; int x, y, z, left, right, middle; /* Sanity check packet */ if (!(packet[0] & 0x40)) { psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n"); return; } /* * There's a special packet that seems to indicate the end * of a stream of trackstick data. Filter these out. */ if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f) return; x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f)); y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f)); z = (packet[4] & 0x7c) >> 2; /* * The x and y values tend to be quite large, and when used * alone the trackstick is difficult to use. Scale them down * to compensate. */ x /= 8; y /= 8; input_report_rel(dev, REL_X, x); input_report_rel(dev, REL_Y, -y); /* * Most ALPS models report the trackstick buttons in the touchpad * packets, but a few report them here. No reliable way has been * found to differentiate between the models upfront, so we enable * the quirk in response to seeing a button press in the trackstick * packet. */ left = packet[3] & 0x01; right = packet[3] & 0x02; middle = packet[3] & 0x04; if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) && (left || right || middle)) priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS; if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) { input_report_key(dev, BTN_LEFT, left); input_report_key(dev, BTN_RIGHT, right); input_report_key(dev, BTN_MIDDLE, middle); } input_sync(dev); return; } static void alps_decode_buttons_v3(struct alps_fields *f, unsigned char *p) { f->left = !!(p[3] & 0x01); f->right = !!(p[3] & 0x02); f->middle = !!(p[3] & 0x04); f->ts_left = !!(p[3] & 0x10); f->ts_right = !!(p[3] & 0x20); f->ts_middle = !!(p[3] & 0x40); } static void alps_decode_pinnacle(struct alps_fields *f, unsigned char *p) { f->first_mp = !!(p[4] & 0x40); f->is_mp = !!(p[0] & 0x40); f->fingers = (p[5] & 0x3) + 1; f->x_map = ((p[4] & 0x7e) << 8) | ((p[1] & 0x7f) << 2) | ((p[0] & 0x30) >> 4); f->y_map = ((p[3] & 0x70) << 4) | ((p[2] & 0x7f) << 1) | (p[4] & 0x01); f->x = ((p[1] & 0x7f) << 4) | ((p[4] & 0x30) >> 2) | ((p[0] & 0x30) >> 4); f->y = ((p[2] & 0x7f) << 4) | (p[4] & 0x0f); f->z = p[5] & 0x7f; alps_decode_buttons_v3(f, p); } static void alps_decode_rushmore(struct alps_fields *f, unsigned char *p) { alps_decode_pinnacle(f, p); f->x_map |= (p[5] & 0x10) << 11; f->y_map |= (p[5] & 0x20) << 6; } static void alps_decode_dolphin(struct alps_fields *f, unsigned char *p) { f->first_mp = !!(p[0] & 0x02); f->is_mp = !!(p[0] & 0x20); f->fingers = ((p[0] & 0x6) >> 1 | (p[0] & 0x10) >> 2); f->x_map = ((p[2] & 0x60) >> 5) | ((p[4] & 0x7f) << 2) | ((p[5] & 0x7f) << 9) | ((p[3] & 0x07) << 16) | ((p[3] & 0x70) << 15) | ((p[0] & 0x01) << 22); f->y_map = (p[1] & 0x7f) | ((p[2] & 0x1f) << 7); f->x = ((p[1] & 0x7f) | ((p[4] & 0x0f) << 7)); f->y = ((p[2] & 0x7f) | ((p[4] & 0xf0) << 3)); f->z = (p[0] & 4) ? 0 : p[5] & 0x7f; alps_decode_buttons_v3(f, p); } static void alps_process_touchpad_packet_v3(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; struct input_dev *dev2 = priv->dev2; int x1 = 0, y1 = 0, x2 = 0, y2 = 0; int fingers = 0, bmap_fingers; struct alps_fields f; priv->decode_fields(&f, packet); /* * There's no single feature of touchpad position and bitmap packets * that can be used to distinguish between them. We rely on the fact * that a bitmap packet should always follow a position packet with * bit 6 of packet[4] set. */ if (priv->multi_packet) { /* * Sometimes a position packet will indicate a multi-packet * sequence, but then what follows is another position * packet. Check for this, and when it happens process the * position packet as usual. */ if (f.is_mp) { fingers = f.fingers; bmap_fingers = alps_process_bitmap(priv, f.x_map, f.y_map, &x1, &y1, &x2, &y2); /* * We shouldn't report more than one finger if * we don't have two coordinates. */ if (fingers > 1 && bmap_fingers < 2) fingers = bmap_fingers; /* Now process position packet */ priv->decode_fields(&f, priv->multi_data); } else { priv->multi_packet = 0; } } /* * Bit 6 of byte 0 is not usually set in position packets. The only * times it seems to be set is in situations where the data is * suspect anyway, e.g. a palm resting flat on the touchpad. Given * this combined with the fact that this bit is useful for filtering * out misidentified bitmap packets, we reject anything with this * bit set. */ if (f.is_mp) return; if (!priv->multi_packet && f.first_mp) { priv->multi_packet = 1; memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); return; } priv->multi_packet = 0; /* * Sometimes the hardware sends a single packet with z = 0 * in the middle of a stream. Real releases generate packets * with x, y, and z all zero, so these seem to be flukes. * Ignore them. */ if (f.x && f.y && !f.z) return; /* * If we don't have MT data or the bitmaps were empty, we have * to rely on ST data. */ if (!fingers) { x1 = f.x; y1 = f.y; fingers = f.z > 0 ? 1 : 0; } if (f.z >= 64) input_report_key(dev, BTN_TOUCH, 1); else input_report_key(dev, BTN_TOUCH, 0); alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); input_mt_report_finger_count(dev, fingers); input_report_key(dev, BTN_LEFT, f.left); input_report_key(dev, BTN_RIGHT, f.right); input_report_key(dev, BTN_MIDDLE, f.middle); if (f.z > 0) { input_report_abs(dev, ABS_X, f.x); input_report_abs(dev, ABS_Y, f.y); } input_report_abs(dev, ABS_PRESSURE, f.z); input_sync(dev); if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) { input_report_key(dev2, BTN_LEFT, f.ts_left); input_report_key(dev2, BTN_RIGHT, f.ts_right); input_report_key(dev2, BTN_MIDDLE, f.ts_middle); input_sync(dev2); } } static void alps_process_packet_v3(struct psmouse *psmouse) { unsigned char *packet = psmouse->packet; /* * v3 protocol packets come in three types, two representing * touchpad data and one representing trackstick data. * Trackstick packets seem to be distinguished by always * having 0x3f in the last byte. This value has never been * observed in the last byte of either of the other types * of packets. */ if (packet[5] == 0x3f) { alps_process_trackstick_packet_v3(psmouse); return; } alps_process_touchpad_packet_v3(psmouse); } static void alps_process_packet_v4(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char *packet = psmouse->packet; struct input_dev *dev = psmouse->dev; int offset; int x, y, z; int left, right; int x1, y1, x2, y2; int fingers = 0; unsigned int x_bitmap, y_bitmap; /* * v4 has a 6-byte encoding for bitmap data, but this data is * broken up between 3 normal packets. Use priv->multi_packet to * track our position in the bitmap packet. */ if (packet[6] & 0x40) { /* sync, reset position */ priv->multi_packet = 0; } if (WARN_ON_ONCE(priv->multi_packet > 2)) return; offset = 2 * priv->multi_packet; priv->multi_data[offset] = packet[6]; priv->multi_data[offset + 1] = packet[7]; if (++priv->multi_packet > 2) { priv->multi_packet = 0; x_bitmap = ((priv->multi_data[2] & 0x1f) << 10) | ((priv->multi_data[3] & 0x60) << 3) | ((priv->multi_data[0] & 0x3f) << 2) | ((priv->multi_data[1] & 0x60) >> 5); y_bitmap = ((priv->multi_data[5] & 0x01) << 10) | ((priv->multi_data[3] & 0x1f) << 5) | (priv->multi_data[1] & 0x1f); fingers = alps_process_bitmap(priv, x_bitmap, y_bitmap, &x1, &y1, &x2, &y2); /* Store MT data.*/ priv->fingers = fingers; priv->x1 = x1; priv->x2 = x2; priv->y1 = y1; priv->y2 = y2; } left = packet[4] & 0x01; right = packet[4] & 0x02; x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) | ((packet[0] & 0x30) >> 4); y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f); z = packet[5] & 0x7f; /* * If there were no contacts in the bitmap, use ST * points in MT reports. * If there were two contacts or more, report MT data. */ if (priv->fingers < 2) { x1 = x; y1 = y; fingers = z > 0 ? 1 : 0; } else { fingers = priv->fingers; x1 = priv->x1; x2 = priv->x2; y1 = priv->y1; y2 = priv->y2; } if (z >= 64) input_report_key(dev, BTN_TOUCH, 1); else input_report_key(dev, BTN_TOUCH, 0); alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2); input_mt_report_finger_count(dev, fingers); input_report_key(dev, BTN_LEFT, left); input_report_key(dev, BTN_RIGHT, right); if (z > 0) { input_report_abs(dev, ABS_X, x); input_report_abs(dev, ABS_Y, y); } input_report_abs(dev, ABS_PRESSURE, z); input_sync(dev); } static void alps_report_bare_ps2_packet(struct psmouse *psmouse, unsigned char packet[], bool report_buttons) { struct alps_data *priv = psmouse->private; struct input_dev *dev2 = priv->dev2; if (report_buttons) alps_report_buttons(psmouse, dev2, psmouse->dev, packet[0] & 1, packet[0] & 2, packet[0] & 4); input_report_rel(dev2, REL_X, packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0); input_report_rel(dev2, REL_Y, packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0); input_sync(dev2); } static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; if (psmouse->pktcnt < 6) return PSMOUSE_GOOD_DATA; if (psmouse->pktcnt == 6) { /* * Start a timer to flush the packet if it ends up last * 6-byte packet in the stream. Timer needs to fire * psmouse core times out itself. 20 ms should be enough * to decide if we are getting more data or not. */ mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20)); return PSMOUSE_GOOD_DATA; } del_timer(&priv->timer); if (psmouse->packet[6] & 0x80) { /* * Highest bit is set - that means we either had * complete ALPS packet and this is start of the * next packet or we got garbage. */ if (((psmouse->packet[3] | psmouse->packet[4] | psmouse->packet[5]) & 0x80) || (!alps_is_valid_first_byte(priv, psmouse->packet[6]))) { psmouse_dbg(psmouse, "refusing packet %4ph (suspected interleaved ps/2)\n", psmouse->packet + 3); return PSMOUSE_BAD_DATA; } priv->process_packet(psmouse); /* Continue with the next packet */ psmouse->packet[0] = psmouse->packet[6]; psmouse->pktcnt = 1; } else { /* * High bit is 0 - that means that we indeed got a PS/2 * packet in the middle of ALPS packet. * * There is also possibility that we got 6-byte ALPS * packet followed by 3-byte packet from trackpoint. We * can not distinguish between these 2 scenarios but * because the latter is unlikely to happen in course of * normal operation (user would need to press all * buttons on the pad and start moving trackpoint * without touching the pad surface) we assume former. * Even if we are wrong the wost thing that would happen * the cursor would jump but we should not get protocol * de-synchronization. */ alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3], false); /* * Continue with the standard ALPS protocol handling, * but make sure we won't process it as an interleaved * packet again, which may happen if all buttons are * pressed. To avoid this let's reset the 4th bit which * is normally 1. */ psmouse->packet[3] = psmouse->packet[6] & 0xf7; psmouse->pktcnt = 4; } return PSMOUSE_GOOD_DATA; } static void alps_flush_packet(unsigned long data) { struct psmouse *psmouse = (struct psmouse *)data; struct alps_data *priv = psmouse->private; serio_pause_rx(psmouse->ps2dev.serio); if (psmouse->pktcnt == psmouse->pktsize) { /* * We did not any more data in reasonable amount of time. * Validate the last 3 bytes and process as a standard * ALPS packet. */ if ((psmouse->packet[3] | psmouse->packet[4] | psmouse->packet[5]) & 0x80) { psmouse_dbg(psmouse, "refusing packet %3ph (suspected interleaved ps/2)\n", psmouse->packet + 3); } else { priv->process_packet(psmouse); } psmouse->pktcnt = 0; } serio_continue_rx(psmouse->ps2dev.serio); } static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */ if (psmouse->pktcnt == 3) { alps_report_bare_ps2_packet(psmouse, psmouse->packet, true); return PSMOUSE_FULL_PACKET; } return PSMOUSE_GOOD_DATA; } /* Check for PS/2 packet stuffed in the middle of ALPS packet. */ if ((priv->flags & ALPS_PS2_INTERLEAVED) && psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) { return alps_handle_interleaved_ps2(psmouse); } if (!alps_is_valid_first_byte(priv, psmouse->packet[0])) { psmouse_dbg(psmouse, "refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n", psmouse->packet[0], priv->mask0, priv->byte0); return PSMOUSE_BAD_DATA; } /* Bytes 2 - pktsize should have 0 in the highest bit */ if (priv->proto_version != ALPS_PROTO_V5 && psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize && (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) { psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]); return PSMOUSE_BAD_DATA; } if (psmouse->pktcnt == psmouse->pktsize) { priv->process_packet(psmouse); return PSMOUSE_FULL_PACKET; } return PSMOUSE_GOOD_DATA; } static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble) { struct ps2dev *ps2dev = &psmouse->ps2dev; struct alps_data *priv = psmouse->private; int command; unsigned char *param; unsigned char dummy[4]; BUG_ON(nibble > 0xf); command = priv->nibble_commands[nibble].command; param = (command & 0x0f00) ? dummy : (unsigned char *)&priv->nibble_commands[nibble].data; if (ps2_command(ps2dev, param, command)) return -1; return 0; } static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr) { struct ps2dev *ps2dev = &psmouse->ps2dev; struct alps_data *priv = psmouse->private; int i, nibble; if (ps2_command(ps2dev, NULL, priv->addr_command)) return -1; for (i = 12; i >= 0; i -= 4) { nibble = (addr >> i) & 0xf; if (alps_command_mode_send_nibble(psmouse, nibble)) return -1; } return 0; } static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[4]; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) return -1; /* * The address being read is returned in the first two bytes * of the result. Check that this address matches the expected * address. */ if (addr != ((param[0] << 8) | param[1])) return -1; return param[2]; } static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr) { if (alps_command_mode_set_addr(psmouse, addr)) return -1; return __alps_command_mode_read_reg(psmouse, addr); } static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value) { if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf)) return -1; if (alps_command_mode_send_nibble(psmouse, value & 0xf)) return -1; return 0; } static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr, u8 value) { if (alps_command_mode_set_addr(psmouse, addr)) return -1; return __alps_command_mode_write_reg(psmouse, value); } static int alps_rpt_cmd(struct psmouse *psmouse, int init_command, int repeated_command, unsigned char *param) { struct ps2dev *ps2dev = &psmouse->ps2dev; param[0] = 0; if (init_command && ps2_command(ps2dev, param, init_command)) return -EIO; if (ps2_command(ps2dev, NULL, repeated_command) || ps2_command(ps2dev, NULL, repeated_command) || ps2_command(ps2dev, NULL, repeated_command)) return -EIO; param[0] = param[1] = param[2] = 0xff; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) return -EIO; psmouse_dbg(psmouse, "%2.2X report: %3ph\n", repeated_command, param); return 0; } static int alps_enter_command_mode(struct psmouse *psmouse) { unsigned char param[4]; if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_RESET_WRAP, param)) { psmouse_err(psmouse, "failed to enter command mode\n"); return -1; } if ((param[0] != 0x88 || (param[1] != 0x07 && param[1] != 0x08)) && param[0] != 0x73) { psmouse_dbg(psmouse, "unknown response while entering command mode\n"); return -1; } return 0; } static inline int alps_exit_command_mode(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) return -1; return 0; } /* * For DualPoint devices select the device that should respond to * subsequent commands. It looks like glidepad is behind stickpointer, * I'd thought it would be other way around... */ static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable) { struct ps2dev *ps2dev = &psmouse->ps2dev; int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11; if (ps2_command(ps2dev, NULL, cmd) || ps2_command(ps2dev, NULL, cmd) || ps2_command(ps2dev, NULL, cmd) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE)) return -1; /* we may get 3 more bytes, just ignore them */ ps2_drain(ps2dev, 3, 100); return 0; } static int alps_absolute_mode_v1_v2(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; /* Try ALPS magic knock - 4 disable before enable */ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) return -1; /* * Switch mouse to poll (remote) mode so motion data will not * get in our way */ return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL); } static int alps_get_status(struct psmouse *psmouse, char *param) { /* Get status: 0xF5 0xF5 0xF5 0xE9 */ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_DISABLE, param)) return -1; return 0; } /* * Turn touchpad tapping on or off. The sequences are: * 0xE9 0xF5 0xF5 0xF3 0x0A to enable, * 0xE9 0xF5 0xF5 0xE8 0x00 to disable. * My guess that 0xE9 (GetInfo) is here as a sync point. * For models that also have stickpointer (DualPoints) its tapping * is controlled separately (0xE6 0xE6 0xE6 0xF3 0x14|0x0A) but * we don't fiddle with it. */ static int alps_tap_mode(struct psmouse *psmouse, int enable) { struct ps2dev *ps2dev = &psmouse->ps2dev; int cmd = enable ? PSMOUSE_CMD_SETRATE : PSMOUSE_CMD_SETRES; unsigned char tap_arg = enable ? 0x0A : 0x00; unsigned char param[4]; if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) || ps2_command(ps2dev, &tap_arg, cmd)) return -1; if (alps_get_status(psmouse, param)) return -1; return 0; } /* * alps_poll() - poll the touchpad for current motion packet. * Used in resync. */ static int alps_poll(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; unsigned char buf[sizeof(psmouse->packet)]; bool poll_failed; if (priv->flags & ALPS_PASS) alps_passthrough_mode_v2(psmouse, true); poll_failed = ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0; if (priv->flags & ALPS_PASS) alps_passthrough_mode_v2(psmouse, false); if (poll_failed || (buf[0] & priv->mask0) != priv->byte0) return -1; if ((psmouse->badbyte & 0xc8) == 0x08) { /* * Poll the track stick ... */ if (ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (3 << 8))) return -1; } memcpy(psmouse->packet, buf, sizeof(buf)); return 0; } static int alps_hw_init_v1_v2(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; if ((priv->flags & ALPS_PASS) && alps_passthrough_mode_v2(psmouse, true)) { return -1; } if (alps_tap_mode(psmouse, true)) { psmouse_warn(psmouse, "Failed to enable hardware tapping\n"); return -1; } if (alps_absolute_mode_v1_v2(psmouse)) { psmouse_err(psmouse, "Failed to enable absolute mode\n"); return -1; } if ((priv->flags & ALPS_PASS) && alps_passthrough_mode_v2(psmouse, false)) { return -1; } /* ALPS needs stream mode, otherwise it won't report any data */ if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) { psmouse_err(psmouse, "Failed to enable stream mode\n"); return -1; } return 0; } /* * Enable or disable passthrough mode to the trackstick. */ static int alps_passthrough_mode_v3(struct psmouse *psmouse, int reg_base, bool enable) { int reg_val, ret = -1; if (alps_enter_command_mode(psmouse)) return -1; reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008); if (reg_val == -1) goto error; if (enable) reg_val |= 0x01; else reg_val &= ~0x01; ret = __alps_command_mode_write_reg(psmouse, reg_val); error: if (alps_exit_command_mode(psmouse)) ret = -1; return ret; } /* Must be in command mode when calling this function */ static int alps_absolute_mode_v3(struct psmouse *psmouse) { int reg_val; reg_val = alps_command_mode_read_reg(psmouse, 0x0004); if (reg_val == -1) return -1; reg_val |= 0x06; if (__alps_command_mode_write_reg(psmouse, reg_val)) return -1; return 0; } static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) { int ret = -EIO, reg_val; if (alps_enter_command_mode(psmouse)) goto error; reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08); if (reg_val == -1) goto error; /* bit 7: trackstick is present */ ret = reg_val & 0x80 ? 0 : -ENODEV; error: alps_exit_command_mode(psmouse); return ret; } static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base) { struct ps2dev *ps2dev = &psmouse->ps2dev; int ret = 0; unsigned char param[4]; if (alps_passthrough_mode_v3(psmouse, reg_base, true)) return -EIO; /* * E7 report for the trackstick * * There have been reports of failures to seem to trace back * to the above trackstick check failing. When these occur * this E7 report fails, so when that happens we continue * with the assumption that there isn't a trackstick after * all. */ if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) { psmouse_warn(psmouse, "trackstick E7 report failed\n"); ret = -ENODEV; } else { psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param); /* * Not sure what this does, but it is absolutely * essential. Without it, the touchpad does not * work at all and the trackstick just emits normal * PS/2 packets. */ if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || alps_command_mode_send_nibble(psmouse, 0x9) || alps_command_mode_send_nibble(psmouse, 0x4)) { psmouse_err(psmouse, "Error sending magic E6 sequence\n"); ret = -EIO; goto error; } /* * This ensures the trackstick packets are in the format * supported by this driver. If bit 1 isn't set the packet * format is different. */ if (alps_enter_command_mode(psmouse) || alps_command_mode_write_reg(psmouse, reg_base + 0x08, 0x82) || alps_exit_command_mode(psmouse)) ret = -EIO; } error: if (alps_passthrough_mode_v3(psmouse, reg_base, false)) ret = -EIO; return ret; } static int alps_hw_init_v3(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; int reg_val; unsigned char param[4]; reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE); if (reg_val == -EIO) goto error; if (reg_val == 0 && alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) goto error; if (alps_enter_command_mode(psmouse) || alps_absolute_mode_v3(psmouse)) { psmouse_err(psmouse, "Failed to enter absolute mode\n"); goto error; } reg_val = alps_command_mode_read_reg(psmouse, 0x0006); if (reg_val == -1) goto error; if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01)) goto error; reg_val = alps_command_mode_read_reg(psmouse, 0x0007); if (reg_val == -1) goto error; if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01)) goto error; if (alps_command_mode_read_reg(psmouse, 0x0144) == -1) goto error; if (__alps_command_mode_write_reg(psmouse, 0x04)) goto error; if (alps_command_mode_read_reg(psmouse, 0x0159) == -1) goto error; if (__alps_command_mode_write_reg(psmouse, 0x03)) goto error; if (alps_command_mode_read_reg(psmouse, 0x0163) == -1) goto error; if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03)) goto error; if (alps_command_mode_read_reg(psmouse, 0x0162) == -1) goto error; if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04)) goto error; alps_exit_command_mode(psmouse); /* Set rate and enable data reporting */ param[0] = 0x64; if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { psmouse_err(psmouse, "Failed to enable data reporting\n"); return -1; } return 0; error: /* * Leaving the touchpad in command mode will essentially render * it unusable until the machine reboots, so exit it here just * to be safe */ alps_exit_command_mode(psmouse); return -1; } static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; struct ps2dev *ps2dev = &psmouse->ps2dev; int reg_val, ret = -1; if (priv->flags & ALPS_DUALPOINT) { reg_val = alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE); if (reg_val == -EIO) goto error; if (reg_val == -ENODEV) priv->flags &= ~ALPS_DUALPOINT; } if (alps_enter_command_mode(psmouse) || alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 || alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) goto error; reg_val = alps_command_mode_read_reg(psmouse, 0xc2c6); if (reg_val == -1) goto error; if (__alps_command_mode_write_reg(psmouse, reg_val & 0xfd)) goto error; if (alps_command_mode_write_reg(psmouse, 0xc2c9, 0x64)) goto error; /* enter absolute mode */ reg_val = alps_command_mode_read_reg(psmouse, 0xc2c4); if (reg_val == -1) goto error; if (__alps_command_mode_write_reg(psmouse, reg_val | 0x02)) goto error; alps_exit_command_mode(psmouse); return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); error: alps_exit_command_mode(psmouse); return ret; } /* Must be in command mode when calling this function */ static int alps_absolute_mode_v4(struct psmouse *psmouse) { int reg_val; reg_val = alps_command_mode_read_reg(psmouse, 0x0004); if (reg_val == -1) return -1; reg_val |= 0x02; if (__alps_command_mode_write_reg(psmouse, reg_val)) return -1; return 0; } static int alps_hw_init_v4(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[4]; if (alps_enter_command_mode(psmouse)) goto error; if (alps_absolute_mode_v4(psmouse)) { psmouse_err(psmouse, "Failed to enter absolute mode\n"); goto error; } if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c)) goto error; if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03)) goto error; if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03)) goto error; if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15)) goto error; if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01)) goto error; if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03)) goto error; if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03)) goto error; if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03)) goto error; alps_exit_command_mode(psmouse); /* * This sequence changes the output from a 9-byte to an * 8-byte format. All the same data seems to be present, * just in a more compact format. */ param[0] = 0xc8; param[1] = 0x64; param[2] = 0x50; if (ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE) || ps2_command(ps2dev, ¶m[2], PSMOUSE_CMD_SETRATE) || ps2_command(ps2dev, param, PSMOUSE_CMD_GETID)) return -1; /* Set rate and enable data reporting */ param[0] = 0x64; if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) || ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { psmouse_err(psmouse, "Failed to enable data reporting\n"); return -1; } return 0; error: /* * Leaving the touchpad in command mode will essentially render * it unusable until the machine reboots, so exit it here just * to be safe */ alps_exit_command_mode(psmouse); return -1; } static int alps_hw_init_dolphin_v1(struct psmouse *psmouse) { struct ps2dev *ps2dev = &psmouse->ps2dev; unsigned char param[2]; /* This is dolphin "v1" as empirically defined by florin9doi */ param[0] = 0x64; param[1] = 0x28; if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) return -1; return 0; } static void alps_set_defaults(struct alps_data *priv) { priv->byte0 = 0x8f; priv->mask0 = 0x8f; priv->flags = ALPS_DUALPOINT; priv->x_max = 2000; priv->y_max = 1400; priv->x_bits = 15; priv->y_bits = 11; switch (priv->proto_version) { case ALPS_PROTO_V1: case ALPS_PROTO_V2: priv->hw_init = alps_hw_init_v1_v2; priv->process_packet = alps_process_packet_v1_v2; priv->set_abs_params = alps_set_abs_params_st; break; case ALPS_PROTO_V3: priv->hw_init = alps_hw_init_v3; priv->process_packet = alps_process_packet_v3; priv->set_abs_params = alps_set_abs_params_mt; priv->decode_fields = alps_decode_pinnacle; priv->nibble_commands = alps_v3_nibble_commands; priv->addr_command = PSMOUSE_CMD_RESET_WRAP; break; case ALPS_PROTO_V4: priv->hw_init = alps_hw_init_v4; priv->process_packet = alps_process_packet_v4; priv->set_abs_params = alps_set_abs_params_mt; priv->nibble_commands = alps_v4_nibble_commands; priv->addr_command = PSMOUSE_CMD_DISABLE; break; case ALPS_PROTO_V5: priv->hw_init = alps_hw_init_dolphin_v1; priv->process_packet = alps_process_packet_v3; priv->decode_fields = alps_decode_dolphin; priv->set_abs_params = alps_set_abs_params_mt; priv->nibble_commands = alps_v3_nibble_commands; priv->addr_command = PSMOUSE_CMD_RESET_WRAP; priv->byte0 = 0xc8; priv->mask0 = 0xc8; priv->flags = 0; priv->x_max = 1360; priv->y_max = 660; priv->x_bits = 23; priv->y_bits = 12; break; } } static int alps_match_table(struct psmouse *psmouse, struct alps_data *priv, unsigned char *e7, unsigned char *ec) { const struct alps_model_info *model; int i; for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) { model = &alps_model_data[i]; if (!memcmp(e7, model->signature, sizeof(model->signature)) && (!model->command_mode_resp || model->command_mode_resp == ec[2])) { priv->proto_version = model->proto_version; alps_set_defaults(priv); priv->flags = model->flags; priv->byte0 = model->byte0; priv->mask0 = model->mask0; return 0; } } return -EINVAL; } static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) { unsigned char e6[4], e7[4], ec[4]; /* * First try "E6 report". * ALPS should return 0,0,10 or 0,0,100 if no buttons are pressed. * The bits 0-2 of the first byte will be 1s if some buttons are * pressed. */ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE11, e6)) return -EIO; if ((e6[0] & 0xf8) != 0 || e6[1] != 0 || (e6[2] != 10 && e6[2] != 100)) return -EINVAL; /* * Now get the "E7" and "EC" reports. These will uniquely identify * most ALPS touchpads. */ if (alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_SETSCALE21, e7) || alps_rpt_cmd(psmouse, PSMOUSE_CMD_SETRES, PSMOUSE_CMD_RESET_WRAP, ec) || alps_exit_command_mode(psmouse)) return -EIO; if (alps_match_table(psmouse, priv, e7, ec) == 0) { return 0; } else if (e7[0] == 0x73 && e7[1] == 0x03 && e7[2] == 0x50 && ec[0] == 0x73 && ec[1] == 0x01) { priv->proto_version = ALPS_PROTO_V5; alps_set_defaults(priv); return 0; } else if (ec[0] == 0x88 && ec[1] == 0x08) { priv->proto_version = ALPS_PROTO_V3; alps_set_defaults(priv); priv->hw_init = alps_hw_init_rushmore_v3; priv->decode_fields = alps_decode_rushmore; priv->x_bits = 16; priv->y_bits = 12; /* hack to make addr_command, nibble_command available */ psmouse->private = priv; if (alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE)) priv->flags &= ~ALPS_DUALPOINT; return 0; } else if (ec[0] == 0x88 && ec[1] == 0x07 && ec[2] >= 0x90 && ec[2] <= 0x9d) { priv->proto_version = ALPS_PROTO_V3; alps_set_defaults(priv); return 0; } psmouse_info(psmouse, "Unknown ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); return -EINVAL; } static int alps_reconnect(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; psmouse_reset(psmouse); if (alps_identify(psmouse, priv) < 0) return -1; return priv->hw_init(psmouse); } static void alps_disconnect(struct psmouse *psmouse) { struct alps_data *priv = psmouse->private; psmouse_reset(psmouse); del_timer_sync(&priv->timer); input_unregister_device(priv->dev2); kfree(priv); } static void alps_set_abs_params_st(struct alps_data *priv, struct input_dev *dev1) { input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0); input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0); } static void alps_set_abs_params_mt(struct alps_data *priv, struct input_dev *dev1) { set_bit(INPUT_PROP_SEMI_MT, dev1->propbit); input_mt_init_slots(dev1, 2, 0); input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit); set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); set_bit(BTN_TOOL_QUADTAP, dev1->keybit); input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); } int alps_init(struct psmouse *psmouse) { struct alps_data *priv; struct input_dev *dev1 = psmouse->dev, *dev2; priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL); dev2 = input_allocate_device(); if (!priv || !dev2) goto init_fail; priv->dev2 = dev2; setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse); psmouse->private = priv; psmouse_reset(psmouse); if (alps_identify(psmouse, priv) < 0) goto init_fail; if (priv->hw_init(psmouse)) goto init_fail; /* * Undo part of setup done for us by psmouse core since touchpad * is not a relative device. */ __clear_bit(EV_REL, dev1->evbit); __clear_bit(REL_X, dev1->relbit); __clear_bit(REL_Y, dev1->relbit); /* * Now set up our capabilities. */ dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY); dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH); dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER); dev1->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT); dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); priv->set_abs_params(priv, dev1); input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); if (priv->flags & ALPS_WHEEL) { dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL); dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL); } if (priv->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) { dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD); dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK); } if (priv->flags & ALPS_FOUR_BUTTONS) { dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0); dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1); dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2); dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3); } else { dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE); } snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys); dev2->phys = priv->phys; dev2->name = (priv->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse"; dev2->id.bustype = BUS_I8042; dev2->id.vendor = 0x0002; dev2->id.product = PSMOUSE_ALPS; dev2->id.version = 0x0000; dev2->dev.parent = &psmouse->ps2dev.serio->dev; dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); dev2->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT); if (input_register_device(priv->dev2)) goto init_fail; psmouse->protocol_handler = alps_process_byte; psmouse->poll = alps_poll; psmouse->disconnect = alps_disconnect; psmouse->reconnect = alps_reconnect; psmouse->pktsize = priv->proto_version == ALPS_PROTO_V4 ? 8 : 6; /* We are having trouble resyncing ALPS touchpads so disable it for now */ psmouse->resync_time = 0; return 0; init_fail: psmouse_reset(psmouse); input_free_device(dev2); kfree(priv); psmouse->private = NULL; return -1; } int alps_detect(struct psmouse *psmouse, bool set_properties) { struct alps_data dummy; if (alps_identify(psmouse, &dummy) < 0) return -1; if (set_properties) { psmouse->vendor = "ALPS"; psmouse->name = dummy.flags & ALPS_DUALPOINT ? "DualPoint TouchPad" : "GlidePoint"; psmouse->model = dummy.proto_version << 8; } return 0; }