/*
* drivers/input/tablet/wacom_sys.c
*
* USB Wacom tablet support - system specific code
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "wacom_wac.h"
#include "wacom.h"
/* defines to get HID report descriptor */
#define HID_DEVICET_HID (USB_TYPE_CLASS | 0x01)
#define HID_DEVICET_REPORT (USB_TYPE_CLASS | 0x02)
#define HID_USAGE_UNDEFINED 0x00
#define HID_USAGE_PAGE 0x05
#define HID_USAGE_PAGE_DIGITIZER 0x0d
#define HID_USAGE_PAGE_DESKTOP 0x01
#define HID_USAGE 0x09
#define HID_USAGE_X 0x30
#define HID_USAGE_Y 0x31
#define HID_USAGE_X_TILT 0x3d
#define HID_USAGE_Y_TILT 0x3e
#define HID_USAGE_FINGER 0x22
#define HID_USAGE_STYLUS 0x20
#define HID_USAGE_CONTACTMAX 0x55
#define HID_COLLECTION 0xa1
#define HID_COLLECTION_LOGICAL 0x02
#define HID_COLLECTION_END 0xc0
enum {
WCM_UNDEFINED = 0,
WCM_DESKTOP,
WCM_DIGITIZER,
};
struct hid_descriptor {
struct usb_descriptor_header header;
__le16 bcdHID;
u8 bCountryCode;
u8 bNumDescriptors;
u8 bDescriptorType;
__le16 wDescriptorLength;
} __attribute__ ((packed));
/* defines to get/set USB message */
#define USB_REQ_GET_REPORT 0x01
#define USB_REQ_SET_REPORT 0x09
#define WAC_HID_FEATURE_REPORT 0x03
#define WAC_MSG_RETRIES 5
#define WAC_CMD_LED_CONTROL 0x20
#define WAC_CMD_ICON_START 0x21
#define WAC_CMD_ICON_XFER 0x23
#define WAC_CMD_RETRIES 10
static int wacom_get_report(struct usb_interface *intf, u8 type, u8 id,
void *buf, size_t size, unsigned int retries)
{
struct usb_device *dev = interface_to_usbdev(intf);
int retval;
do {
retval = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_REPORT,
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE,
(type << 8) + id,
intf->altsetting[0].desc.bInterfaceNumber,
buf, size, 100);
} while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries);
return retval;
}
static int wacom_set_report(struct usb_interface *intf, u8 type, u8 id,
void *buf, size_t size, unsigned int retries)
{
struct usb_device *dev = interface_to_usbdev(intf);
int retval;
do {
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_REPORT,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
(type << 8) + id,
intf->altsetting[0].desc.bInterfaceNumber,
buf, size, 1000);
} while ((retval == -ETIMEDOUT || retval == -EPIPE) && --retries);
return retval;
}
static void wacom_sys_irq(struct urb *urb)
{
struct wacom *wacom = urb->context;
struct device *dev = &wacom->intf->dev;
int retval;
switch (urb->status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dev_dbg(dev, "%s - urb shutting down with status: %d\n",
__func__, urb->status);
return;
default:
dev_dbg(dev, "%s - nonzero urb status received: %d\n",
__func__, urb->status);
goto exit;
}
wacom_wac_irq(&wacom->wacom_wac, urb->actual_length);
exit:
usb_mark_last_busy(wacom->usbdev);
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
__func__, retval);
}
static int wacom_open(struct input_dev *dev)
{
struct wacom *wacom = input_get_drvdata(dev);
int retval = 0;
if (usb_autopm_get_interface(wacom->intf) < 0)
return -EIO;
mutex_lock(&wacom->lock);
if (usb_submit_urb(wacom->irq, GFP_KERNEL)) {
retval = -EIO;
goto out;
}
wacom->open = true;
wacom->intf->needs_remote_wakeup = 1;
out:
mutex_unlock(&wacom->lock);
usb_autopm_put_interface(wacom->intf);
return retval;
}
static void wacom_close(struct input_dev *dev)
{
struct wacom *wacom = input_get_drvdata(dev);
int autopm_error;
autopm_error = usb_autopm_get_interface(wacom->intf);
mutex_lock(&wacom->lock);
usb_kill_urb(wacom->irq);
wacom->open = false;
wacom->intf->needs_remote_wakeup = 0;
mutex_unlock(&wacom->lock);
if (!autopm_error)
usb_autopm_put_interface(wacom->intf);
}
/*
* Calculate the resolution of the X or Y axis, given appropriate HID data.
* This function is little more than hidinput_calc_abs_res stripped down.
*/
static int wacom_calc_hid_res(int logical_extents, int physical_extents,
unsigned char unit, unsigned char exponent)
{
int prev, unit_exponent;
/* Check if the extents are sane */
if (logical_extents <= 0 || physical_extents <= 0)
return 0;
/* Get signed value of nybble-sized twos-compliment exponent */
unit_exponent = exponent;
if (unit_exponent > 7)
unit_exponent -= 16;
/* Convert physical_extents to millimeters */
if (unit == 0x11) { /* If centimeters */
unit_exponent += 1;
} else if (unit == 0x13) { /* If inches */
prev = physical_extents;
physical_extents *= 254;
if (physical_extents < prev)
return 0;
unit_exponent -= 1;
} else {
return 0;
}
/* Apply negative unit exponent */
for (; unit_exponent < 0; unit_exponent++) {
prev = logical_extents;
logical_extents *= 10;
if (logical_extents < prev)
return 0;
}
/* Apply positive unit exponent */
for (; unit_exponent > 0; unit_exponent--) {
prev = physical_extents;
physical_extents *= 10;
if (physical_extents < prev)
return 0;
}
/* Calculate resolution */
return logical_extents / physical_extents;
}
/*
* The physical dimension specified by the HID descriptor is likely not in
* the "100th of a mm" units expected by wacom_calculate_touch_res. This
* function adjusts the value of [xy]_phy based on the unit and exponent
* provided by the HID descriptor. If an error occurs durring conversion
* (e.g. from the unit being left unspecified) [xy]_phy is not modified.
*/
static void wacom_fix_phy_from_hid(struct wacom_features *features)
{
int xres = wacom_calc_hid_res(features->x_max, features->x_phy,
features->unit, features->unitExpo);
int yres = wacom_calc_hid_res(features->y_max, features->y_phy,
features->unit, features->unitExpo);
if (xres > 0 && yres > 0) {
features->x_phy = (100 * features->x_max) / xres;
features->y_phy = (100 * features->y_max) / yres;
}
}
/*
* Static values for max X/Y and resolution of Pen interface is stored in
* features. This mean physical size of active area can be computed.
* This is useful to do when Pen and Touch have same active area of tablet.
* This means for Touch device, we only need to find max X/Y value and we
* have enough information to compute resolution of touch.
*/
static void wacom_set_phy_from_res(struct wacom_features *features)
{
features->x_phy = (features->x_max * 100) / features->x_resolution;
features->y_phy = (features->y_max * 100) / features->y_resolution;
}
static int wacom_parse_logical_collection(unsigned char *report,
struct wacom_features *features)
{
int length = 0;
if (features->type == BAMBOO_PT) {
/* Logical collection is only used by 3rd gen Bamboo Touch */
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
features->device_type = BTN_TOOL_FINGER;
wacom_set_phy_from_res(features);
features->x_max = features->y_max =
get_unaligned_le16(&report[10]);
length = 11;
}
return length;
}
static void wacom_retrieve_report_data(struct usb_interface *intf,
struct wacom_features *features)
{
int result = 0;
unsigned char *rep_data;
rep_data = kmalloc(2, GFP_KERNEL);
if (rep_data) {
rep_data[0] = 12;
result = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
rep_data[0], rep_data, 2,
WAC_MSG_RETRIES);
if (result >= 0 && rep_data[1] > 2)
features->touch_max = rep_data[1];
kfree(rep_data);
}
}
/*
* Interface Descriptor of wacom devices can be incomplete and
* inconsistent so wacom_features table is used to store stylus
* device's packet lengths, various maximum values, and tablet
* resolution based on product ID's.
*
* For devices that contain 2 interfaces, wacom_features table is
* inaccurate for the touch interface. Since the Interface Descriptor
* for touch interfaces has pretty complete data, this function exists
* to query tablet for this missing information instead of hard coding in
* an additional table.
*
* A typical Interface Descriptor for a stylus will contain a
* boot mouse application collection that is not of interest and this
* function will ignore it.
*
* It also contains a digitizer application collection that also is not
* of interest since any information it contains would be duplicate
* of what is in wacom_features. Usually it defines a report of an array
* of bytes that could be used as max length of the stylus packet returned.
* If it happens to define a Digitizer-Stylus Physical Collection then
* the X and Y logical values contain valid data but it is ignored.
*
* A typical Interface Descriptor for a touch interface will contain a
* Digitizer-Finger Physical Collection which will define both logical
* X/Y maximum as well as the physical size of tablet. Since touch
* interfaces haven't supported pressure or distance, this is enough
* information to override invalid values in the wacom_features table.
*
* 3rd gen Bamboo Touch no longer define a Digitizer-Finger Pysical
* Collection. Instead they define a Logical Collection with a single
* Logical Maximum for both X and Y.
*
* Intuos5 touch interface does not contain useful data. We deal with
* this after returning from this function.
*/
static int wacom_parse_hid(struct usb_interface *intf,
struct hid_descriptor *hid_desc,
struct wacom_features *features)
{
struct usb_device *dev = interface_to_usbdev(intf);
char limit = 0;
/* result has to be defined as int for some devices */
int result = 0;
int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
unsigned char *report;
report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL);
if (!report)
return -ENOMEM;
/* retrive report descriptors */
do {
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR,
USB_RECIP_INTERFACE | USB_DIR_IN,
HID_DEVICET_REPORT << 8,
intf->altsetting[0].desc.bInterfaceNumber, /* interface */
report,
hid_desc->wDescriptorLength,
5000); /* 5 secs */
} while (result < 0 && limit++ < WAC_MSG_RETRIES);
/* No need to parse the Descriptor. It isn't an error though */
if (result < 0)
goto out;
for (i = 0; i < hid_desc->wDescriptorLength; i++) {
switch (report[i]) {
case HID_USAGE_PAGE:
switch (report[i + 1]) {
case HID_USAGE_PAGE_DIGITIZER:
usage = WCM_DIGITIZER;
i++;
break;
case HID_USAGE_PAGE_DESKTOP:
usage = WCM_DESKTOP;
i++;
break;
}
break;
case HID_USAGE:
switch (report[i + 1]) {
case HID_USAGE_X:
if (usage == WCM_DESKTOP) {
if (finger) {
features->device_type = BTN_TOOL_FINGER;
switch (features->type) {
case TABLETPC2FG:
features->pktlen = WACOM_PKGLEN_TPC2FG;
break;
case MTSCREEN:
case WACOM_24HDT:
features->pktlen = WACOM_PKGLEN_MTOUCH;
break;
case MTTPC:
features->pktlen = WACOM_PKGLEN_MTTPC;
break;
case BAMBOO_PT:
features->pktlen = WACOM_PKGLEN_BBTOUCH;
break;
default:
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
break;
}
switch (features->type) {
case BAMBOO_PT:
features->x_phy =
get_unaligned_le16(&report[i + 5]);
features->x_max =
get_unaligned_le16(&report[i + 8]);
i += 15;
break;
case WACOM_24HDT:
features->x_max =
get_unaligned_le16(&report[i + 3]);
features->x_phy =
get_unaligned_le16(&report[i + 8]);
features->unit = report[i - 1];
features->unitExpo = report[i - 3];
i += 12;
break;
default:
features->x_max =
get_unaligned_le16(&report[i + 3]);
features->x_phy =
get_unaligned_le16(&report[i + 6]);
features->unit = report[i + 9];
features->unitExpo = report[i + 11];
i += 12;
break;
}
} else if (pen) {
/* penabled only accepts exact bytes of data */
if (features->type >= TABLETPC)
features->pktlen = WACOM_PKGLEN_GRAPHIRE;
features->device_type = BTN_TOOL_PEN;
features->x_max =
get_unaligned_le16(&report[i + 3]);
i += 4;
}
}
break;
case HID_USAGE_Y:
if (usage == WCM_DESKTOP) {
if (finger) {
switch (features->type) {
case TABLETPC2FG:
case MTSCREEN:
case MTTPC:
features->y_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
get_unaligned_le16(&report[i + 6]);
i += 7;
break;
case WACOM_24HDT:
features->y_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
get_unaligned_le16(&report[i - 2]);
i += 7;
break;
case BAMBOO_PT:
features->y_phy =
get_unaligned_le16(&report[i + 3]);
features->y_max =
get_unaligned_le16(&report[i + 6]);
i += 12;
break;
default:
features->y_max =
features->x_max;
features->y_phy =
get_unaligned_le16(&report[i + 3]);
i += 4;
break;
}
} else if (pen) {
features->y_max =
get_unaligned_le16(&report[i + 3]);
i += 4;
}
}
break;
case HID_USAGE_FINGER:
finger = 1;
i++;
break;
/*
* Requiring Stylus Usage will ignore boot mouse
* X/Y values and some cases of invalid Digitizer X/Y
* values commonly reported.
*/
case HID_USAGE_STYLUS:
pen = 1;
i++;
break;
case HID_USAGE_CONTACTMAX:
/* leave touch_max as is if predefined */
if (!features->touch_max)
wacom_retrieve_report_data(intf, features);
i++;
break;
}
break;
case HID_COLLECTION_END:
/* reset UsagePage and Finger */
finger = usage = 0;
break;
case HID_COLLECTION:
i++;
switch (report[i]) {
case HID_COLLECTION_LOGICAL:
i += wacom_parse_logical_collection(&report[i],
features);
break;
}
break;
}
}
out:
result = 0;
kfree(report);
return result;
}
static int wacom_set_device_mode(struct usb_interface *intf, int report_id, int length, int mode)
{
unsigned char *rep_data;
int error = -ENOMEM, limit = 0;
rep_data = kzalloc(length, GFP_KERNEL);
if (!rep_data)
return error;
do {
rep_data[0] = report_id;
rep_data[1] = mode;
error = wacom_set_report(intf, WAC_HID_FEATURE_REPORT,
report_id, rep_data, length, 1);
if (error >= 0)
error = wacom_get_report(intf, WAC_HID_FEATURE_REPORT,
report_id, rep_data, length, 1);
} while ((error < 0 || rep_data[1] != mode) && limit++ < WAC_MSG_RETRIES);
kfree(rep_data);
return error < 0 ? error : 0;
}
/*
* Switch the tablet into its most-capable mode. Wacom tablets are
* typically configured to power-up in a mode which sends mouse-like
* reports to the OS. To get absolute position, pressure data, etc.
* from the tablet, it is necessary to switch the tablet out of this
* mode and into one which sends the full range of tablet data.
*/
static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_features *features)
{
if (features->device_type == BTN_TOOL_FINGER) {
if (features->type > TABLETPC) {
/* MT Tablet PC touch */
return wacom_set_device_mode(intf, 3, 4, 4);
}
else if (features->type == WACOM_24HDT) {
return wacom_set_device_mode(intf, 18, 3, 2);
}
} else if (features->device_type == BTN_TOOL_PEN) {
if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
return wacom_set_device_mode(intf, 2, 2, 2);
}
}
return 0;
}
static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
struct wacom_features *features)
{
int error = 0;
struct usb_host_interface *interface = intf->cur_altsetting;
struct hid_descriptor *hid_desc;
/* default features */
features->device_type = BTN_TOOL_PEN;
features->x_fuzz = 4;
features->y_fuzz = 4;
features->pressure_fuzz = 0;
features->distance_fuzz = 0;
/*
* The wireless device HID is basic and layout conflicts with
* other tablets (monitor and touch interface can look like pen).
* Skip the query for this type and modify defaults based on
* interface number.
*/
if (features->type == WIRELESS) {
if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
features->device_type = 0;
} else if (intf->cur_altsetting->desc.bInterfaceNumber == 2) {
features->device_type = BTN_TOOL_FINGER;
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
}
}
/* only devices that support touch need to retrieve the info */
if (features->type < BAMBOO_PT) {
goto out;
}
error = usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc);
if (error) {
error = usb_get_extra_descriptor(&interface->endpoint[0],
HID_DEVICET_REPORT, &hid_desc);
if (error) {
dev_err(&intf->dev,
"can not retrieve extra class descriptor\n");
goto out;
}
}
error = wacom_parse_hid(intf, hid_desc, features);
if (error)
goto out;
wacom_fix_phy_from_hid(features);
out:
return error;
}
struct wacom_usbdev_data {
struct list_head list;
struct kref kref;
struct usb_device *dev;
struct wacom_shared shared;
};
static LIST_HEAD(wacom_udev_list);
static DEFINE_MUTEX(wacom_udev_list_lock);
static struct usb_device *wacom_get_sibling(struct usb_device *dev, int vendor, int product)
{
int port1;
struct usb_device *sibling;
if (vendor == 0 && product == 0)
return dev;
if (dev->parent == NULL)
return NULL;
usb_hub_for_each_child(dev->parent, port1, sibling) {
struct usb_device_descriptor *d;
if (sibling == NULL)
continue;
d = &sibling->descriptor;
if (d->idVendor == vendor && d->idProduct == product)
return sibling;
}
return NULL;
}
static struct wacom_usbdev_data *wacom_get_usbdev_data(struct usb_device *dev)
{
struct wacom_usbdev_data *data;
list_for_each_entry(data, &wacom_udev_list, list) {
if (data->dev == dev) {
kref_get(&data->kref);
return data;
}
}
return NULL;
}
static int wacom_add_shared_data(struct wacom_wac *wacom,
struct usb_device *dev)
{
struct wacom_usbdev_data *data;
int retval = 0;
mutex_lock(&wacom_udev_list_lock);
data = wacom_get_usbdev_data(dev);
if (!data) {
data = kzalloc(sizeof(struct wacom_usbdev_data), GFP_KERNEL);
if (!data) {
retval = -ENOMEM;
goto out;
}
kref_init(&data->kref);
data->dev = dev;
list_add_tail(&data->list, &wacom_udev_list);
}
wacom->shared = &data->shared;
out:
mutex_unlock(&wacom_udev_list_lock);
return retval;
}
static void wacom_release_shared_data(struct kref *kref)
{
struct wacom_usbdev_data *data =
container_of(kref, struct wacom_usbdev_data, kref);
mutex_lock(&wacom_udev_list_lock);
list_del(&data->list);
mutex_unlock(&wacom_udev_list_lock);
kfree(data);
}
static void wacom_remove_shared_data(struct wacom_wac *wacom)
{
struct wacom_usbdev_data *data;
if (wacom->shared) {
data = container_of(wacom->shared, struct wacom_usbdev_data, shared);
kref_put(&data->kref, wacom_release_shared_data);
wacom->shared = NULL;
}
}
static int wacom_led_control(struct wacom *wacom)
{
unsigned char *buf;
int retval;
buf = kzalloc(9, GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (wacom->wacom_wac.features.type >= INTUOS5S &&
wacom->wacom_wac.features.type <= INTUOS5L) {
/*
* Touch Ring and crop mark LED luminance may take on
* one of four values:
* 0 = Low; 1 = Medium; 2 = High; 3 = Off
*/
int ring_led = wacom->led.select[0] & 0x03;
int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03;
int crop_lum = 0;
buf[0] = WAC_CMD_LED_CONTROL;
buf[1] = (crop_lum << 4) | (ring_lum << 2) | (ring_led);
}
else {
int led = wacom->led.select[0] | 0x4;
if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
wacom->wacom_wac.features.type == WACOM_24HD)
led |= (wacom->led.select[1] << 4) | 0x40;
buf[0] = WAC_CMD_LED_CONTROL;
buf[1] = led;
buf[2] = wacom->led.llv;
buf[3] = wacom->led.hlv;
buf[4] = wacom->led.img_lum;
}
retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_LED_CONTROL,
buf, 9, WAC_CMD_RETRIES);
kfree(buf);
return retval;
}
static int wacom_led_putimage(struct wacom *wacom, int button_id, const void *img)
{
unsigned char *buf;
int i, retval;
buf = kzalloc(259, GFP_KERNEL);
if (!buf)
return -ENOMEM;
/* Send 'start' command */
buf[0] = WAC_CMD_ICON_START;
buf[1] = 1;
retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START,
buf, 2, WAC_CMD_RETRIES);
if (retval < 0)
goto out;
buf[0] = WAC_CMD_ICON_XFER;
buf[1] = button_id & 0x07;
for (i = 0; i < 4; i++) {
buf[2] = i;
memcpy(buf + 3, img + i * 256, 256);
retval = wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_XFER,
buf, 259, WAC_CMD_RETRIES);
if (retval < 0)
break;
}
/* Send 'stop' */
buf[0] = WAC_CMD_ICON_START;
buf[1] = 0;
wacom_set_report(wacom->intf, 0x03, WAC_CMD_ICON_START,
buf, 2, WAC_CMD_RETRIES);
out:
kfree(buf);
return retval;
}
static ssize_t wacom_led_select_store(struct device *dev, int set_id,
const char *buf, size_t count)
{
struct wacom *wacom = dev_get_drvdata(dev);
unsigned int id;
int err;
err = kstrtouint(buf, 10, &id);
if (err)
return err;
mutex_lock(&wacom->lock);
wacom->led.select[set_id] = id & 0x3;
err = wacom_led_control(wacom);
mutex_unlock(&wacom->lock);
return err < 0 ? err : count;
}
#define DEVICE_LED_SELECT_ATTR(SET_ID) \
static ssize_t wacom_led##SET_ID##_select_store(struct device *dev, \
struct device_attribute *attr, const char *buf, size_t count) \
{ \
return wacom_led_select_store(dev, SET_ID, buf, count); \
} \
static ssize_t wacom_led##SET_ID##_select_show(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct wacom *wacom = dev_get_drvdata(dev); \
return snprintf(buf, 2, "%d\n", wacom->led.select[SET_ID]); \
} \
static DEVICE_ATTR(status_led##SET_ID##_select, S_IWUSR | S_IRUSR, \
wacom_led##SET_ID##_select_show, \
wacom_led##SET_ID##_select_store)
DEVICE_LED_SELECT_ATTR(0);
DEVICE_LED_SELECT_ATTR(1);
static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest,
const char *buf, size_t count)
{
unsigned int value;
int err;
err = kstrtouint(buf, 10, &value);
if (err)
return err;
mutex_lock(&wacom->lock);
*dest = value & 0x7f;
err = wacom_led_control(wacom);
mutex_unlock(&wacom->lock);
return err < 0 ? err : count;
}
#define DEVICE_LUMINANCE_ATTR(name, field) \
static ssize_t wacom_##name##_luminance_store(struct device *dev, \
struct device_attribute *attr, const char *buf, size_t count) \
{ \
struct wacom *wacom = dev_get_drvdata(dev); \
\
return wacom_luminance_store(wacom, &wacom->led.field, \
buf, count); \
} \
static DEVICE_ATTR(name##_luminance, S_IWUSR, \
NULL, wacom_##name##_luminance_store)
DEVICE_LUMINANCE_ATTR(status0, llv);
DEVICE_LUMINANCE_ATTR(status1, hlv);
DEVICE_LUMINANCE_ATTR(buttons, img_lum);
static ssize_t wacom_button_image_store(struct device *dev, int button_id,
const char *buf, size_t count)
{
struct wacom *wacom = dev_get_drvdata(dev);
int err;
if (count != 1024)
return -EINVAL;
mutex_lock(&wacom->lock);
err = wacom_led_putimage(wacom, button_id, buf);
mutex_unlock(&wacom->lock);
return err < 0 ? err : count;
}
#define DEVICE_BTNIMG_ATTR(BUTTON_ID) \
static ssize_t wacom_btnimg##BUTTON_ID##_store(struct device *dev, \
struct device_attribute *attr, const char *buf, size_t count) \
{ \
return wacom_button_image_store(dev, BUTTON_ID, buf, count); \
} \
static DEVICE_ATTR(button##BUTTON_ID##_rawimg, S_IWUSR, \
NULL, wacom_btnimg##BUTTON_ID##_store)
DEVICE_BTNIMG_ATTR(0);
DEVICE_BTNIMG_ATTR(1);
DEVICE_BTNIMG_ATTR(2);
DEVICE_BTNIMG_ATTR(3);
DEVICE_BTNIMG_ATTR(4);
DEVICE_BTNIMG_ATTR(5);
DEVICE_BTNIMG_ATTR(6);
DEVICE_BTNIMG_ATTR(7);
static struct attribute *cintiq_led_attrs[] = {
&dev_attr_status_led0_select.attr,
&dev_attr_status_led1_select.attr,
NULL
};
static struct attribute_group cintiq_led_attr_group = {
.name = "wacom_led",
.attrs = cintiq_led_attrs,
};
static struct attribute *intuos4_led_attrs[] = {
&dev_attr_status0_luminance.attr,
&dev_attr_status1_luminance.attr,
&dev_attr_status_led0_select.attr,
&dev_attr_buttons_luminance.attr,
&dev_attr_button0_rawimg.attr,
&dev_attr_button1_rawimg.attr,
&dev_attr_button2_rawimg.attr,
&dev_attr_button3_rawimg.attr,
&dev_attr_button4_rawimg.attr,
&dev_attr_button5_rawimg.attr,
&dev_attr_button6_rawimg.attr,
&dev_attr_button7_rawimg.attr,
NULL
};
static struct attribute_group intuos4_led_attr_group = {
.name = "wacom_led",
.attrs = intuos4_led_attrs,
};
static struct attribute *intuos5_led_attrs[] = {
&dev_attr_status0_luminance.attr,
&dev_attr_status_led0_select.attr,
NULL
};
static struct attribute_group intuos5_led_attr_group = {
.name = "wacom_led",
.attrs = intuos5_led_attrs,
};
static int wacom_initialize_leds(struct wacom *wacom)
{
int error;
/* Initialize default values */
switch (wacom->wacom_wac.features.type) {
case INTUOS4S:
case INTUOS4:
case INTUOS4L:
wacom->led.select[0] = 0;
wacom->led.select[1] = 0;
wacom->led.llv = 10;
wacom->led.hlv = 20;
wacom->led.img_lum = 10;
error = sysfs_create_group(&wacom->intf->dev.kobj,
&intuos4_led_attr_group);
break;
case WACOM_24HD:
case WACOM_21UX2:
wacom->led.select[0] = 0;
wacom->led.select[1] = 0;
wacom->led.llv = 0;
wacom->led.hlv = 0;
wacom->led.img_lum = 0;
error = sysfs_create_group(&wacom->intf->dev.kobj,
&cintiq_led_attr_group);
break;
case INTUOS5S:
case INTUOS5:
case INTUOS5L:
wacom->led.select[0] = 0;
wacom->led.select[1] = 0;
wacom->led.llv = 32;
wacom->led.hlv = 0;
wacom->led.img_lum = 0;
error = sysfs_create_group(&wacom->intf->dev.kobj,
&intuos5_led_attr_group);
break;
default:
return 0;
}
if (error) {
dev_err(&wacom->intf->dev,
"cannot create sysfs group err: %d\n", error);
return error;
}
wacom_led_control(wacom);
return 0;
}
static void wacom_destroy_leds(struct wacom *wacom)
{
switch (wacom->wacom_wac.features.type) {
case INTUOS4S:
case INTUOS4:
case INTUOS4L:
sysfs_remove_group(&wacom->intf->dev.kobj,
&intuos4_led_attr_group);
break;
case WACOM_24HD:
case WACOM_21UX2:
sysfs_remove_group(&wacom->intf->dev.kobj,
&cintiq_led_attr_group);
break;
case INTUOS5S:
case INTUOS5:
case INTUOS5L:
sysfs_remove_group(&wacom->intf->dev.kobj,
&intuos5_led_attr_group);
break;
}
}
static enum power_supply_property wacom_battery_props[] = {
POWER_SUPPLY_PROP_CAPACITY
};
static int wacom_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct wacom *wacom = container_of(psy, struct wacom, battery);
int ret = 0;
switch (psp) {
case POWER_SUPPLY_PROP_CAPACITY:
val->intval =
wacom->wacom_wac.battery_capacity * 100 / 31;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int wacom_initialize_battery(struct wacom *wacom)
{
int error = 0;
if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR) {
wacom->battery.properties = wacom_battery_props;
wacom->battery.num_properties = ARRAY_SIZE(wacom_battery_props);
wacom->battery.get_property = wacom_battery_get_property;
wacom->battery.name = "wacom_battery";
wacom->battery.type = POWER_SUPPLY_TYPE_BATTERY;
wacom->battery.use_for_apm = 0;
error = power_supply_register(&wacom->usbdev->dev,
&wacom->battery);
if (!error)
power_supply_powers(&wacom->battery,
&wacom->usbdev->dev);
}
return error;
}
static void wacom_destroy_battery(struct wacom *wacom)
{
if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_MONITOR &&
wacom->battery.dev) {
power_supply_unregister(&wacom->battery);
wacom->battery.dev = NULL;
}
}
static int wacom_register_input(struct wacom *wacom)
{
struct input_dev *input_dev;
struct usb_interface *intf = wacom->intf;
struct usb_device *dev = interface_to_usbdev(intf);
struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
int error;
input_dev = input_allocate_device();
if (!input_dev) {
error = -ENOMEM;
goto fail1;
}
input_dev->name = wacom_wac->name;
input_dev->dev.parent = &intf->dev;
input_dev->open = wacom_open;
input_dev->close = wacom_close;
usb_to_input_id(dev, &input_dev->id);
input_set_drvdata(input_dev, wacom);
wacom_wac->input = input_dev;
error = wacom_setup_input_capabilities(input_dev, wacom_wac);
if (error)
goto fail1;
error = input_register_device(input_dev);
if (error)
goto fail2;
return 0;
fail2:
input_free_device(input_dev);
wacom_wac->input = NULL;
fail1:
return error;
}
static void wacom_wireless_work(struct work_struct *work)
{
struct wacom *wacom = container_of(work, struct wacom, work);
struct usb_device *usbdev = wacom->usbdev;
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom *wacom1, *wacom2;
struct wacom_wac *wacom_wac1, *wacom_wac2;
int error;
/*
* Regardless if this is a disconnect or a new tablet,
* remove any existing input and battery devices.
*/
wacom_destroy_battery(wacom);
/* Stylus interface */
wacom1 = usb_get_intfdata(usbdev->config->interface[1]);
wacom_wac1 = &(wacom1->wacom_wac);
if (wacom_wac1->input)
input_unregister_device(wacom_wac1->input);
wacom_wac1->input = NULL;
/* Touch interface */
wacom2 = usb_get_intfdata(usbdev->config->interface[2]);
wacom_wac2 = &(wacom2->wacom_wac);
if (wacom_wac2->input)
input_unregister_device(wacom_wac2->input);
wacom_wac2->input = NULL;
if (wacom_wac->pid == 0) {
dev_info(&wacom->intf->dev, "wireless tablet disconnected\n");
} else {
const struct usb_device_id *id = wacom_ids;
dev_info(&wacom->intf->dev,
"wireless tablet connected with PID %x\n",
wacom_wac->pid);
while (id->match_flags) {
if (id->idVendor == USB_VENDOR_ID_WACOM &&
id->idProduct == wacom_wac->pid)
break;
id++;
}
if (!id->match_flags) {
dev_info(&wacom->intf->dev,
"ignoring unknown PID.\n");
return;
}
/* Stylus interface */
wacom_wac1->features =
*((struct wacom_features *)id->driver_info);
wacom_wac1->features.device_type = BTN_TOOL_PEN;
error = wacom_register_input(wacom1);
if (error)
goto fail1;
/* Touch interface */
wacom_wac2->features =
*((struct wacom_features *)id->driver_info);
wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
wacom_wac2->features.device_type = BTN_TOOL_FINGER;
wacom_set_phy_from_res(&wacom_wac2->features);
wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
error = wacom_register_input(wacom2);
if (error)
goto fail2;
error = wacom_initialize_battery(wacom);
if (error)
goto fail3;
}
return;
fail3:
input_unregister_device(wacom_wac2->input);
wacom_wac2->input = NULL;
fail2:
input_unregister_device(wacom_wac1->input);
wacom_wac1->input = NULL;
fail1:
return;
}
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
struct wacom_features *features;
int error;
if (!id->driver_info)
return -EINVAL;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
if (!wacom)
return -ENOMEM;
wacom_wac = &wacom->wacom_wac;
wacom_wac->features = *((struct wacom_features *)id->driver_info);
features = &wacom_wac->features;
if (features->pktlen > WACOM_PKGLEN_MAX) {
error = -EINVAL;
goto fail1;
}
wacom_wac->data = usb_alloc_coherent(dev, WACOM_PKGLEN_MAX,
GFP_KERNEL, &wacom->data_dma);
if (!wacom_wac->data) {
error = -ENOMEM;
goto fail1;
}
wacom->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!wacom->irq) {
error = -ENOMEM;
goto fail2;
}
wacom->usbdev = dev;
wacom->intf = intf;
mutex_init(&wacom->lock);
INIT_WORK(&wacom->work, wacom_wireless_work);
usb_make_path(dev, wacom->phys, sizeof(wacom->phys));
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
endpoint = &intf->cur_altsetting->endpoint[0].desc;
/* Retrieve the physical and logical size for touch devices */
error = wacom_retrieve_hid_descriptor(intf, features);
if (error)
goto fail3;
/*
* Intuos5 has no useful data about its touch interface in its
* HID descriptor. If this is the touch interface (wMaxPacketSize
* of WACOM_PKGLEN_BBTOUCH3), override the table values.
*/
if (features->type >= INTUOS5S && features->type <= INTUOS5L) {
if (endpoint->wMaxPacketSize == WACOM_PKGLEN_BBTOUCH3) {
features->device_type = BTN_TOOL_FINGER;
features->pktlen = WACOM_PKGLEN_BBTOUCH3;
wacom_set_phy_from_res(features);
features->x_max = 4096;
features->y_max = 4096;
} else {
features->device_type = BTN_TOOL_PEN;
}
}
wacom_setup_device_quirks(features);
strlcpy(wacom_wac->name, features->name, sizeof(wacom_wac->name));
if (features->quirks & WACOM_QUIRK_MULTI_INPUT) {
struct usb_device *other_dev;
/* Append the device type to the name */
strlcat(wacom_wac->name,
features->device_type == BTN_TOOL_PEN ?
" Pen" : " Finger",
sizeof(wacom_wac->name));
other_dev = wacom_get_sibling(dev, features->oVid, features->oPid);
if (other_dev == NULL || wacom_get_usbdev_data(other_dev) == NULL)
other_dev = dev;
error = wacom_add_shared_data(wacom_wac, other_dev);
if (error)
goto fail3;
}
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, features->pktlen,
wacom_sys_irq, wacom, endpoint->bInterval);
wacom->irq->transfer_dma = wacom->data_dma;
wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
error = wacom_initialize_leds(wacom);
if (error)
goto fail4;
if (!(features->quirks & WACOM_QUIRK_NO_INPUT)) {
error = wacom_register_input(wacom);
if (error)
goto fail5;
}
/* Note that if query fails it is not a hard failure */
wacom_query_tablet_data(intf, features);
usb_set_intfdata(intf, wacom);
if (features->quirks & WACOM_QUIRK_MONITOR) {
if (usb_submit_urb(wacom->irq, GFP_KERNEL))
goto fail5;
}
return 0;
fail5: wacom_destroy_leds(wacom);
fail4: wacom_remove_shared_data(wacom_wac);
fail3: usb_free_urb(wacom->irq);
fail2: usb_free_coherent(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma);
fail1: kfree(wacom);
return error;
}
static void wacom_disconnect(struct usb_interface *intf)
{
struct wacom *wacom = usb_get_intfdata(intf);
usb_set_intfdata(intf, NULL);
usb_kill_urb(wacom->irq);
cancel_work_sync(&wacom->work);
if (wacom->wacom_wac.input)
input_unregister_device(wacom->wacom_wac.input);
wacom_destroy_battery(wacom);
wacom_destroy_leds(wacom);
usb_free_urb(wacom->irq);
usb_free_coherent(interface_to_usbdev(intf), WACOM_PKGLEN_MAX,
wacom->wacom_wac.data, wacom->data_dma);
wacom_remove_shared_data(&wacom->wacom_wac);
kfree(wacom);
}
static int wacom_suspend(struct usb_interface *intf, pm_message_t message)
{
struct wacom *wacom = usb_get_intfdata(intf);
mutex_lock(&wacom->lock);
usb_kill_urb(wacom->irq);
mutex_unlock(&wacom->lock);
return 0;
}
static int wacom_resume(struct usb_interface *intf)
{
struct wacom *wacom = usb_get_intfdata(intf);
struct wacom_features *features = &wacom->wacom_wac.features;
int rv = 0;
mutex_lock(&wacom->lock);
/* switch to wacom mode first */
wacom_query_tablet_data(intf, features);
wacom_led_control(wacom);
if ((wacom->open || features->quirks & WACOM_QUIRK_MONITOR)
&& usb_submit_urb(wacom->irq, GFP_NOIO) < 0)
rv = -EIO;
mutex_unlock(&wacom->lock);
return rv;
}
static int wacom_reset_resume(struct usb_interface *intf)
{
return wacom_resume(intf);
}
static struct usb_driver wacom_driver = {
.name = "wacom",
.id_table = wacom_ids,
.probe = wacom_probe,
.disconnect = wacom_disconnect,
.suspend = wacom_suspend,
.resume = wacom_resume,
.reset_resume = wacom_reset_resume,
.supports_autosuspend = 1,
};
module_usb_driver(wacom_driver);