/* * Hauppauge HD PVR USB driver * * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) * Copyright (C) 2008 Janne Grunau (j@jannau.net) * Copyright (C) 2008 John Poet * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation, version 2. * */ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/uaccess.h> #include <linux/atomic.h> #include <linux/usb.h> #include <linux/mutex.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <media/v4l2-dev.h> #include <media/v4l2-common.h> #include "hdpvr.h" static int video_nr[HDPVR_MAX] = {[0 ... (HDPVR_MAX - 1)] = UNSET}; module_param_array(video_nr, int, NULL, 0); MODULE_PARM_DESC(video_nr, "video device number (-1=Auto)"); /* holds the number of currently registered devices */ static atomic_t dev_nr = ATOMIC_INIT(-1); int hdpvr_debug; module_param(hdpvr_debug, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(hdpvr_debug, "enable debugging output"); static uint default_video_input = HDPVR_VIDEO_INPUTS; module_param(default_video_input, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(default_video_input, "default video input: 0=Component / " "1=S-Video / 2=Composite"); static uint default_audio_input = HDPVR_AUDIO_INPUTS; module_param(default_audio_input, uint, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(default_audio_input, "default audio input: 0=RCA back / " "1=RCA front / 2=S/PDIF"); static bool boost_audio; module_param(boost_audio, bool, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(boost_audio, "boost the audio signal"); /* table of devices that work with this driver */ static struct usb_device_id hdpvr_table[] = { { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID) }, { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID1) }, { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID2) }, { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID3) }, { USB_DEVICE(HD_PVR_VENDOR_ID, HD_PVR_PRODUCT_ID4) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, hdpvr_table); void hdpvr_delete(struct hdpvr_device *dev) { hdpvr_free_buffers(dev); if (dev->video_dev) video_device_release(dev->video_dev); usb_put_dev(dev->udev); } static void challenge(u8 *bytes) { u64 *i64P, tmp64; uint i, idx; for (idx = 0; idx < 32; ++idx) { if (idx & 0x3) bytes[(idx >> 3) + 3] = bytes[(idx >> 2) & 0x3]; switch (idx & 0x3) { case 0x3: bytes[2] += bytes[3] * 4 + bytes[4] + bytes[5]; bytes[4] += bytes[(idx & 0x1) * 2] * 9 + 9; break; case 0x1: bytes[0] *= 8; bytes[0] += 7*idx + 4; bytes[6] += bytes[3] * 3; break; case 0x0: bytes[3 - (idx >> 3)] = bytes[idx >> 2]; bytes[5] += bytes[6] * 3; for (i = 0; i < 3; i++) bytes[3] *= bytes[3] + 1; break; case 0x2: for (i = 0; i < 3; i++) bytes[1] *= bytes[6] + 1; for (i = 0; i < 3; i++) { i64P = (u64 *)bytes; tmp64 = le64_to_cpup(i64P); tmp64 <<= bytes[7] & 0x0f; *i64P += cpu_to_le64(tmp64); } break; } } } /* try to init the device like the windows driver */ static int device_authorization(struct hdpvr_device *dev) { int ret, retval = -ENOMEM; char request_type = 0x38, rcv_request = 0x81; char *response; #ifdef HDPVR_DEBUG size_t buf_size = 46; char *print_buf = kzalloc(5*buf_size+1, GFP_KERNEL); if (!print_buf) { v4l2_err(&dev->v4l2_dev, "Out of memory\n"); return retval; } #endif mutex_lock(&dev->usbc_mutex); ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), rcv_request, 0x80 | request_type, 0x0400, 0x0003, dev->usbc_buf, 46, 10000); if (ret != 46) { v4l2_err(&dev->v4l2_dev, "unexpected answer of status request, len %d\n", ret); goto unlock; } #ifdef HDPVR_DEBUG else { hex_dump_to_buffer(dev->usbc_buf, 46, 16, 1, print_buf, 5*buf_size+1, 0); v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "Status request returned, len %d: %s\n", ret, print_buf); } #endif dev->fw_ver = dev->usbc_buf[1]; v4l2_info(&dev->v4l2_dev, "firmware version 0x%x dated %s\n", dev->fw_ver, &dev->usbc_buf[2]); if (dev->fw_ver > 0x15) { dev->options.brightness = 0x80; dev->options.contrast = 0x40; dev->options.hue = 0xf; dev->options.saturation = 0x40; dev->options.sharpness = 0x80; } switch (dev->fw_ver) { case HDPVR_FIRMWARE_VERSION: dev->flags &= ~HDPVR_FLAG_AC3_CAP; break; case HDPVR_FIRMWARE_VERSION_AC3: case HDPVR_FIRMWARE_VERSION_0X12: case HDPVR_FIRMWARE_VERSION_0X15: case HDPVR_FIRMWARE_VERSION_0X1E: dev->flags |= HDPVR_FLAG_AC3_CAP; break; default: v4l2_info(&dev->v4l2_dev, "untested firmware, the driver might" " not work.\n"); if (dev->fw_ver >= HDPVR_FIRMWARE_VERSION_AC3) dev->flags |= HDPVR_FLAG_AC3_CAP; else dev->flags &= ~HDPVR_FLAG_AC3_CAP; } response = dev->usbc_buf+38; #ifdef HDPVR_DEBUG hex_dump_to_buffer(response, 8, 16, 1, print_buf, 5*buf_size+1, 0); v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "challenge: %s\n", print_buf); #endif challenge(response); #ifdef HDPVR_DEBUG hex_dump_to_buffer(response, 8, 16, 1, print_buf, 5*buf_size+1, 0); v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, " response: %s\n", print_buf); kfree(print_buf); #endif msleep(100); ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), 0xd1, 0x00 | request_type, 0x0000, 0x0000, response, 8, 10000); v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "magic request returned %d\n", ret); retval = ret != 8; unlock: mutex_unlock(&dev->usbc_mutex); return retval; } static int hdpvr_device_init(struct hdpvr_device *dev) { int ret; u8 *buf; struct hdpvr_video_info *vidinf; if (device_authorization(dev)) return -EACCES; /* default options for init */ hdpvr_set_options(dev); /* set filter options */ mutex_lock(&dev->usbc_mutex); buf = dev->usbc_buf; buf[0] = 0x03; buf[1] = 0x03; buf[2] = 0x00; buf[3] = 0x00; ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), 0x01, 0x38, CTRL_LOW_PASS_FILTER_VALUE, CTRL_DEFAULT_INDEX, buf, 4, 1000); v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "control request returned %d\n", ret); mutex_unlock(&dev->usbc_mutex); vidinf = get_video_info(dev); if (!vidinf) v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "no valid video signal or device init failed\n"); else kfree(vidinf); /* enable fan and bling leds */ mutex_lock(&dev->usbc_mutex); buf[0] = 0x1; ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), 0xd4, 0x38, 0, 0, buf, 1, 1000); v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "control request returned %d\n", ret); /* boost analog audio */ buf[0] = boost_audio; ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), 0xd5, 0x38, 0, 0, buf, 1, 1000); v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, "control request returned %d\n", ret); mutex_unlock(&dev->usbc_mutex); dev->status = STATUS_IDLE; return 0; } static const struct hdpvr_options hdpvr_default_options = { .video_std = HDPVR_60HZ, .video_input = HDPVR_COMPONENT, .audio_input = HDPVR_RCA_BACK, .bitrate = 65, /* 6 mbps */ .peak_bitrate = 90, /* 9 mbps */ .bitrate_mode = HDPVR_CONSTANT, .gop_mode = HDPVR_SIMPLE_IDR_GOP, .audio_codec = V4L2_MPEG_AUDIO_ENCODING_AAC, /* original picture controls for firmware version <= 0x15 */ /* updated in device_authorization() for newer firmware */ .brightness = 0x86, .contrast = 0x80, .hue = 0x80, .saturation = 0x80, .sharpness = 0x80, }; static int hdpvr_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct hdpvr_device *dev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; struct i2c_client *client; size_t buffer_size; int i; int retval = -ENOMEM; /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) { dev_err(&interface->dev, "Out of memory\n"); goto error; } dev->workqueue = 0; /* register v4l2_device early so it can be used for printks */ if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) { dev_err(&interface->dev, "v4l2_device_register failed\n"); goto error; } mutex_init(&dev->io_mutex); mutex_init(&dev->i2c_mutex); mutex_init(&dev->usbc_mutex); dev->usbc_buf = kmalloc(64, GFP_KERNEL); if (!dev->usbc_buf) { v4l2_err(&dev->v4l2_dev, "Out of memory\n"); goto error; } init_waitqueue_head(&dev->wait_buffer); init_waitqueue_head(&dev->wait_data); dev->workqueue = create_singlethread_workqueue("hdpvr_buffer"); if (!dev->workqueue) goto error; /* init video transfer queues */ INIT_LIST_HEAD(&dev->free_buff_list); INIT_LIST_HEAD(&dev->rec_buff_list); dev->options = hdpvr_default_options; if (default_video_input < HDPVR_VIDEO_INPUTS) dev->options.video_input = default_video_input; if (default_audio_input < HDPVR_AUDIO_INPUTS) { dev->options.audio_input = default_audio_input; if (default_audio_input == HDPVR_SPDIF) dev->options.audio_codec = V4L2_MPEG_AUDIO_ENCODING_AC3; } dev->udev = usb_get_dev(interface_to_usbdev(interface)); /* set up the endpoint information */ /* use only the first bulk-in and bulk-out endpoints */ iface_desc = interface->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) { /* USB interface description is buggy, reported max * packet size is 512 bytes, windows driver uses 8192 */ buffer_size = 8192; dev->bulk_in_size = buffer_size; dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; } } if (!dev->bulk_in_endpointAddr) { v4l2_err(&dev->v4l2_dev, "Could not find bulk-in endpoint\n"); goto error; } /* init the device */ if (hdpvr_device_init(dev)) { v4l2_err(&dev->v4l2_dev, "device init failed\n"); goto error; } mutex_lock(&dev->io_mutex); if (hdpvr_alloc_buffers(dev, NUM_BUFFERS)) { mutex_unlock(&dev->io_mutex); v4l2_err(&dev->v4l2_dev, "allocating transfer buffers failed\n"); goto error; } mutex_unlock(&dev->io_mutex); #if IS_ENABLED(CONFIG_I2C) retval = hdpvr_register_i2c_adapter(dev); if (retval < 0) { v4l2_err(&dev->v4l2_dev, "i2c adapter register failed\n"); goto error; } client = hdpvr_register_ir_rx_i2c(dev); if (!client) { v4l2_err(&dev->v4l2_dev, "i2c IR RX device register failed\n"); retval = -ENODEV; goto reg_fail; } client = hdpvr_register_ir_tx_i2c(dev); if (!client) { v4l2_err(&dev->v4l2_dev, "i2c IR TX device register failed\n"); retval = -ENODEV; goto reg_fail; } #endif retval = hdpvr_register_videodev(dev, &interface->dev, video_nr[atomic_inc_return(&dev_nr)]); if (retval < 0) { v4l2_err(&dev->v4l2_dev, "registering videodev failed\n"); goto error; } /* let the user know what node this device is now attached to */ v4l2_info(&dev->v4l2_dev, "device now attached to %s\n", video_device_node_name(dev->video_dev)); return 0; reg_fail: #if IS_ENABLED(CONFIG_I2C) i2c_del_adapter(&dev->i2c_adapter); #endif error: if (dev) { /* Destroy single thread */ if (dev->workqueue) destroy_workqueue(dev->workqueue); /* this frees allocated memory */ hdpvr_delete(dev); } return retval; } static void hdpvr_disconnect(struct usb_interface *interface) { struct hdpvr_device *dev = to_hdpvr_dev(usb_get_intfdata(interface)); v4l2_info(&dev->v4l2_dev, "device %s disconnected\n", video_device_node_name(dev->video_dev)); /* prevent more I/O from starting and stop any ongoing */ mutex_lock(&dev->io_mutex); dev->status = STATUS_DISCONNECTED; wake_up_interruptible(&dev->wait_data); wake_up_interruptible(&dev->wait_buffer); mutex_unlock(&dev->io_mutex); v4l2_device_disconnect(&dev->v4l2_dev); msleep(100); flush_workqueue(dev->workqueue); mutex_lock(&dev->io_mutex); hdpvr_cancel_queue(dev); mutex_unlock(&dev->io_mutex); #if IS_ENABLED(CONFIG_I2C) i2c_del_adapter(&dev->i2c_adapter); #endif video_unregister_device(dev->video_dev); atomic_dec(&dev_nr); } static struct usb_driver hdpvr_usb_driver = { .name = "hdpvr", .probe = hdpvr_probe, .disconnect = hdpvr_disconnect, .id_table = hdpvr_table, }; module_usb_driver(hdpvr_usb_driver); MODULE_LICENSE("GPL"); MODULE_VERSION("0.2.1"); MODULE_AUTHOR("Janne Grunau"); MODULE_DESCRIPTION("Hauppauge HD PVR driver");