/* Driver for Realtek PCI-Express card reader * * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, see <http://www.gnu.org/licenses/>. * * Author: * Wei WANG <wei_wang@realsil.com.cn> * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China */ #include <linux/module.h> #include <linux/delay.h> #include <linux/mfd/rtsx_pci.h> #include "rtsx_pcr.h" static u8 rts5229_get_ic_version(struct rtsx_pcr *pcr) { u8 val; rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val); return val & 0x0F; } static int rts5229_extra_init_hw(struct rtsx_pcr *pcr) { rtsx_pci_init_cmd(pcr); /* Configure GPIO as output */ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, GPIO_CTL, 0x02, 0x02); /* Switch LDO3318 source from DV33 to card_3v3 */ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x00); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, LDO_PWR_SEL, 0x03, 0x01); /* LED shine disabled, set initial shine cycle period */ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, OLT_LED_CTL, 0x0F, 0x02); return rtsx_pci_send_cmd(pcr, 100); } static int rts5229_optimize_phy(struct rtsx_pcr *pcr) { /* Optimize RX sensitivity */ return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42); } static int rts5229_turn_on_led(struct rtsx_pcr *pcr) { return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x02); } static int rts5229_turn_off_led(struct rtsx_pcr *pcr) { return rtsx_pci_write_register(pcr, GPIO_CTL, 0x02, 0x00); } static int rts5229_enable_auto_blink(struct rtsx_pcr *pcr) { return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x08); } static int rts5229_disable_auto_blink(struct rtsx_pcr *pcr) { return rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x08, 0x00); } static int rts5229_card_power_on(struct rtsx_pcr *pcr, int card) { int err; rtsx_pci_init_cmd(pcr); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, SD_POWER_MASK, SD_PARTIAL_POWER_ON); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, LDO3318_PWR_MASK, 0x02); err = rtsx_pci_send_cmd(pcr, 100); if (err < 0) return err; /* To avoid too large in-rush current */ udelay(150); rtsx_pci_init_cmd(pcr); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, SD_POWER_MASK, SD_POWER_ON); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, LDO3318_PWR_MASK, 0x06); err = rtsx_pci_send_cmd(pcr, 100); if (err < 0) return err; return 0; } static int rts5229_card_power_off(struct rtsx_pcr *pcr, int card) { rtsx_pci_init_cmd(pcr); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CARD_PWR_CTL, SD_POWER_MASK | PMOS_STRG_MASK, SD_POWER_OFF | PMOS_STRG_400mA); rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PWR_GATE_CTRL, LDO3318_PWR_MASK, 0X00); return rtsx_pci_send_cmd(pcr, 100); } static int rts5229_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage) { int err; if (voltage == OUTPUT_3V3) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_D); if (err < 0) return err; err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4FC0 | 0x24); if (err < 0) return err; } else if (voltage == OUTPUT_1V8) { err = rtsx_pci_write_register(pcr, SD30_DRIVE_SEL, 0x07, DRIVER_TYPE_B); if (err < 0) return err; err = rtsx_pci_write_phy_register(pcr, 0x08, 0x4C40 | 0x24); if (err < 0) return err; } else { return -EINVAL; } return 0; } static const struct pcr_ops rts5229_pcr_ops = { .extra_init_hw = rts5229_extra_init_hw, .optimize_phy = rts5229_optimize_phy, .turn_on_led = rts5229_turn_on_led, .turn_off_led = rts5229_turn_off_led, .enable_auto_blink = rts5229_enable_auto_blink, .disable_auto_blink = rts5229_disable_auto_blink, .card_power_on = rts5229_card_power_on, .card_power_off = rts5229_card_power_off, .switch_output_voltage = rts5229_switch_output_voltage, .cd_deglitch = NULL, .conv_clk_and_div_n = NULL, }; /* SD Pull Control Enable: * SD_DAT[3:0] ==> pull up * SD_CD ==> pull up * SD_WP ==> pull up * SD_CMD ==> pull up * SD_CLK ==> pull down */ static const u32 rts5229_sd_pull_ctl_enable_tbl1[] = { RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA), RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9), 0, }; /* For RTS5229 version C */ static const u32 rts5229_sd_pull_ctl_enable_tbl2[] = { RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA), RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD9), 0, }; /* SD Pull Control Disable: * SD_DAT[3:0] ==> pull down * SD_CD ==> pull up * SD_WP ==> pull down * SD_CMD ==> pull down * SD_CLK ==> pull down */ static const u32 rts5229_sd_pull_ctl_disable_tbl1[] = { RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55), RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5), 0, }; /* For RTS5229 version C */ static const u32 rts5229_sd_pull_ctl_disable_tbl2[] = { RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55), RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE5), 0, }; /* MS Pull Control Enable: * MS CD ==> pull up * others ==> pull down */ static const u32 rts5229_ms_pull_ctl_enable_tbl[] = { RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55), RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15), 0, }; /* MS Pull Control Disable: * MS CD ==> pull up * others ==> pull down */ static const u32 rts5229_ms_pull_ctl_disable_tbl[] = { RTSX_REG_PAIR(CARD_PULL_CTL5, 0x55), RTSX_REG_PAIR(CARD_PULL_CTL6, 0x15), 0, }; void rts5229_init_params(struct rtsx_pcr *pcr) { pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104; pcr->num_slots = 2; pcr->ops = &rts5229_pcr_ops; pcr->ic_version = rts5229_get_ic_version(pcr); if (pcr->ic_version == IC_VER_C) { pcr->sd_pull_ctl_enable_tbl = rts5229_sd_pull_ctl_enable_tbl2; pcr->sd_pull_ctl_disable_tbl = rts5229_sd_pull_ctl_disable_tbl2; } else { pcr->sd_pull_ctl_enable_tbl = rts5229_sd_pull_ctl_enable_tbl1; pcr->sd_pull_ctl_disable_tbl = rts5229_sd_pull_ctl_disable_tbl1; } pcr->ms_pull_ctl_enable_tbl = rts5229_ms_pull_ctl_enable_tbl; pcr->ms_pull_ctl_disable_tbl = rts5229_ms_pull_ctl_disable_tbl; }