/* * Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux. * Amiga MacroSystemUS WarpEngine SCSI controller. * Amiga Technologies/DKB A4091 SCSI controller. * * Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk> * plus modifications of the 53c7xx.c driver to support the Amiga. * * Rewritten to use 53c700.c by Kars de Jong <jongk@linux-m68k.org> */ #include <linux/module.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/zorro.h> #include <linux/slab.h> #include <asm/amigahw.h> #include <asm/amigaints.h> #include <scsi/scsi_host.h> #include <scsi/scsi_transport_spi.h> #include "53c700.h" MODULE_AUTHOR("Alan Hourihane <alanh@fairlite.demon.co.uk> / Kars de Jong <jongk@linux-m68k.org>"); MODULE_DESCRIPTION("Amiga Zorro NCR53C710 driver"); MODULE_LICENSE("GPL"); static struct scsi_host_template zorro7xx_scsi_driver_template = { .proc_name = "zorro7xx", .this_id = 7, .module = THIS_MODULE, }; static struct zorro_driver_data { const char *name; unsigned long offset; int absolute; /* offset is absolute address */ } zorro7xx_driver_data[] = { { .name = "PowerUP 603e+", .offset = 0xf40000, .absolute = 1 }, { .name = "WarpEngine 40xx", .offset = 0x40000 }, { .name = "A4091", .offset = 0x800000 }, { .name = "GForce 040/060", .offset = 0x40000 }, { 0 } }; static struct zorro_device_id zorro7xx_zorro_tbl[] = { { .id = ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS, .driver_data = (unsigned long)&zorro7xx_driver_data[0], }, { .id = ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx, .driver_data = (unsigned long)&zorro7xx_driver_data[1], }, { .id = ZORRO_PROD_CBM_A4091_1, .driver_data = (unsigned long)&zorro7xx_driver_data[2], }, { .id = ZORRO_PROD_CBM_A4091_2, .driver_data = (unsigned long)&zorro7xx_driver_data[2], }, { .id = ZORRO_PROD_GVP_GFORCE_040_060, .driver_data = (unsigned long)&zorro7xx_driver_data[3], }, { 0 } }; MODULE_DEVICE_TABLE(zorro, zorro7xx_zorro_tbl); static int zorro7xx_init_one(struct zorro_dev *z, const struct zorro_device_id *ent) { struct Scsi_Host *host; struct NCR_700_Host_Parameters *hostdata; struct zorro_driver_data *zdd; unsigned long board, ioaddr; board = zorro_resource_start(z); zdd = (struct zorro_driver_data *)ent->driver_data; if (zdd->absolute) { ioaddr = zdd->offset; } else { ioaddr = board + zdd->offset; } if (!zorro_request_device(z, zdd->name)) { printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n", board); return -EBUSY; } hostdata = kzalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL); if (!hostdata) { printk(KERN_ERR "zorro7xx: Failed to allocate host data\n"); goto out_release; } /* Fill in the required pieces of hostdata */ if (ioaddr > 0x01000000) hostdata->base = ioremap(ioaddr, zorro_resource_len(z)); else hostdata->base = (void __iomem *)ZTWO_VADDR(ioaddr); hostdata->clock = 50; hostdata->chip710 = 1; /* Settings for at least WarpEngine 40xx */ hostdata->ctest7_extra = CTEST7_TT1; zorro7xx_scsi_driver_template.name = zdd->name; /* and register the chip */ host = NCR_700_detect(&zorro7xx_scsi_driver_template, hostdata, &z->dev); if (!host) { printk(KERN_ERR "zorro7xx: No host detected; " "board configuration problem?\n"); goto out_free; } host->this_id = 7; host->base = ioaddr; host->irq = IRQ_AMIGA_PORTS; if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "zorro7xx-scsi", host)) { printk(KERN_ERR "zorro7xx: request_irq failed\n"); goto out_put_host; } zorro_set_drvdata(z, host); scsi_scan_host(host); return 0; out_put_host: scsi_host_put(host); out_free: if (ioaddr > 0x01000000) iounmap(hostdata->base); kfree(hostdata); out_release: zorro_release_device(z); return -ENODEV; } static void zorro7xx_remove_one(struct zorro_dev *z) { struct Scsi_Host *host = zorro_get_drvdata(z); struct NCR_700_Host_Parameters *hostdata = shost_priv(host); scsi_remove_host(host); NCR_700_release(host); kfree(hostdata); free_irq(host->irq, host); zorro_release_device(z); } static struct zorro_driver zorro7xx_driver = { .name = "zorro7xx-scsi", .id_table = zorro7xx_zorro_tbl, .probe = zorro7xx_init_one, .remove = zorro7xx_remove_one, }; static int __init zorro7xx_scsi_init(void) { return zorro_register_driver(&zorro7xx_driver); } static void __exit zorro7xx_scsi_exit(void) { zorro_unregister_driver(&zorro7xx_driver); } module_init(zorro7xx_scsi_init); module_exit(zorro7xx_scsi_exit);