/* Driver for Realtek RTS51xx USB card reader * Header file * * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, see <http://www.gnu.org/licenses/>. * * Author: * wwang (wei_wang@realsil.com.cn) * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China * Maintainer: * Edwin Rong (edwin_rong@realsil.com.cn) * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China */ #ifndef __RTS51X_SCSI_H #define __RTS51X_SCSI_H #include <linux/usb.h> #include <linux/usb_usual.h> #include <linux/blkdev.h> #include <linux/completion.h> #include <linux/mutex.h> #include <scsi/scsi_host.h> #include "rts51x_chip.h" #define MS_SP_CMND 0xFA #define MS_FORMAT 0xA0 #define GET_MS_INFORMATION 0xB0 #define VENDOR_CMND 0xF0 #define READ_STATUS 0x09 #define READ_MEM 0x0D #define WRITE_MEM 0x0E #define GET_BUS_WIDTH 0x13 #define GET_SD_CSD 0x14 #define TOGGLE_GPIO 0x15 #define TRACE_MSG 0x18 #define SCSI_APP_CMD 0x10 #define PP_READ10 0x1A #define PP_WRITE10 0x0A #define READ_HOST_REG 0x1D #define WRITE_HOST_REG 0x0D #define SET_VAR 0x05 #define GET_VAR 0x15 #define DMA_READ 0x16 #define DMA_WRITE 0x06 #define GET_DEV_STATUS 0x10 #define SET_CHIP_MODE 0x27 #define SUIT_CMD 0xE0 #define WRITE_PHY 0x07 #define READ_PHY 0x17 #define INIT_BATCHCMD 0x41 #define ADD_BATCHCMD 0x42 #define SEND_BATCHCMD 0x43 #define GET_BATCHRSP 0x44 #ifdef SUPPORT_CPRM /* SD Pass Through Command Extension */ #define SD_PASS_THRU_MODE 0xD0 #define SD_EXECUTE_NO_DATA 0xD1 #define SD_EXECUTE_READ 0xD2 #define SD_EXECUTE_WRITE 0xD3 #define SD_GET_RSP 0xD4 #define SD_HW_RST 0xD6 #endif #ifdef SUPPORT_MAGIC_GATE #define CMD_MSPRO_MG_RKEY 0xA4 /* Report Key Command */ #define CMD_MSPRO_MG_SKEY 0xA3 /* Send Key Command */ /* CBWCB field: key class */ #define KC_MG_R_PRO 0xBE /* MG-R PRO */ /* CBWCB field: key format */ #define KF_SET_LEAF_ID 0x31 /* Set Leaf ID */ #define KF_GET_LOC_EKB 0x32 /* Get Local EKB */ #define KF_CHG_HOST 0x33 /* Challenge (host) */ #define KF_RSP_CHG 0x34 /* Response and Challenge (device) */ #define KF_RSP_HOST 0x35 /* Response (host) */ #define KF_GET_ICV 0x36 /* Get ICV */ #define KF_SET_ICV 0x37 /* SSet ICV */ #endif struct rts51x_chip; /*----------------------------------- Start-Stop-Unit -----------------------------------*/ #define STOP_MEDIUM 0x00 /* access disable */ #define MAKE_MEDIUM_READY 0x01 /* access enable */ #define UNLOAD_MEDIUM 0x02 /* unload */ #define LOAD_MEDIUM 0x03 /* load */ /*----------------------------------- STANDARD_INQUIRY -----------------------------------*/ #define QULIFIRE 0x00 #define AENC_FNC 0x00 #define TRML_IOP 0x00 #define REL_ADR 0x00 #define WBUS_32 0x00 #define WBUS_16 0x00 #define SYNC 0x00 #define LINKED 0x00 #define CMD_QUE 0x00 #define SFT_RE 0x00 #define VEN_ID_LEN 8 /* Vendor ID Length */ #define PRDCT_ID_LEN 16 /* Product ID Length */ #define PRDCT_REV_LEN 4 /* Product LOT Length */ #define DRCT_ACCESS_DEV 0x00 /* Direct Access Device */ #define RMB_DISC 0x80 /* The Device is Removable */ #define ANSI_SCSI2 0x02 /* Based on ANSI-SCSI2 */ #define SCSI 0x00 /* Interface ID */ void rts51x_scsi_show_command(struct scsi_cmnd *srb); void rts51x_set_sense_type(struct rts51x_chip *chip, unsigned int lun, int sense_type); void rts51x_set_sense_data(struct rts51x_chip *chip, unsigned int lun, u8 err_code, u8 sense_key, u32 info, u8 asc, u8 ascq, u8 sns_key_info0, u16 sns_key_info1); int rts51x_scsi_handler(struct scsi_cmnd *srb, struct rts51x_chip *chip); struct Scsi_Host; struct scsi_device; struct scsi_cmnd; int slave_alloc(struct scsi_device *sdev); int slave_configure(struct scsi_device *sdev); int queuecommand(struct Scsi_Host *, struct scsi_cmnd *); int command_abort(struct scsi_cmnd *srb); int bus_reset(struct scsi_cmnd *srb); #endif /* __RTS51X_SCSI_H */