- 根目录:
- arch
- powerpc
- platforms
- ps3
- interrupt.c
/*
* PS3 interrupt routines.
*
* Copyright (C) 2006 Sony Computer Entertainment Inc.
* Copyright 2006 Sony Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/irq.h>
#include <asm/machdep.h>
#include <asm/udbg.h>
#include <asm/lv1call.h>
#include <asm/smp.h>
#include "platform.h"
#if defined(DEBUG)
#define DBG udbg_printf
#define FAIL udbg_printf
#else
#define DBG pr_devel
#define FAIL pr_debug
#endif
/**
* struct ps3_bmp - a per cpu irq status and mask bitmap structure
* @status: 256 bit status bitmap indexed by plug
* @unused_1: Alignment
* @mask: 256 bit mask bitmap indexed by plug
* @unused_2: Alignment
*
* The HV maintains per SMT thread mappings of HV outlet to HV plug on
* behalf of the guest. These mappings are implemented as 256 bit guest
* supplied bitmaps indexed by plug number. The addresses of the bitmaps
* are registered with the HV through lv1_configure_irq_state_bitmap().
* The HV requires that the 512 bits of status + mask not cross a page
* boundary. PS3_BMP_MINALIGN is used to define this minimal 64 byte
* alignment.
*
* The HV supports 256 plugs per thread, assigned as {0..255}, for a total
* of 512 plugs supported on a processor. To simplify the logic this
* implementation equates HV plug value to Linux virq value, constrains each
* interrupt to have a system wide unique plug number, and limits the range
* of the plug values to map into the first dword of the bitmaps. This
* gives a usable range of plug values of {NUM_ISA_INTERRUPTS..63}. Note
* that there is no constraint on how many in this set an individual thread
* can acquire.
*
* The mask is declared as unsigned long so we can use set/clear_bit on it.
*/
#define PS3_BMP_MINALIGN 64
struct ps3_bmp {
struct {
u64 status;
u64 unused_1[3];
unsigned long mask;
u64 unused_2[3];
};
};
/**
* struct ps3_private - a per cpu data structure
* @bmp: ps3_bmp structure
* @bmp_lock: Syncronize access to bmp.
* @ipi_debug_brk_mask: Mask for debug break IPIs
* @ppe_id: HV logical_ppe_id
* @thread_id: HV thread_id
* @ipi_mask: Mask of IPI virqs
*/
struct ps3_private {
struct ps3_bmp bmp __attribute__ ((aligned (PS3_BMP_MINALIGN)));
spinlock_t bmp_lock;
u64 ppe_id;
u64 thread_id;
unsigned long ipi_debug_brk_mask;
unsigned long ipi_mask;
};
static DEFINE_PER_CPU(struct ps3_private, ps3_private);
/**
* ps3_chip_mask - Set an interrupt mask bit in ps3_bmp.
* @virq: The assigned Linux virq.
*
* Sets ps3_bmp.mask and calls lv1_did_update_interrupt_mask().
*/
static void ps3_chip_mask(struct irq_data *d)
{
struct ps3_private *pd = irq_data_get_irq_chip_data(d);
unsigned long flags;
DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, d->irq);
local_irq_save(flags);
clear_bit(63 - d->irq, &pd->bmp.mask);
lv1_did_update_interrupt_mask(pd->ppe_id, pd->thread_id);
local_irq_restore(flags);
}
/**
* ps3_chip_unmask - Clear an interrupt mask bit in ps3_bmp.
* @virq: The assigned Linux virq.
*
* Clears ps3_bmp.mask and calls lv1_did_update_interrupt_mask().
*/
static void ps3_chip_unmask(struct irq_data *d)
{
struct ps3_private *pd = irq_data_get_irq_chip_data(d);
unsigned long flags;
DBG("%s:%d: thread_id %llu, virq %d\n", __func__, __LINE__,
pd->thread_id, d->irq);
local_irq_save(flags);
set_bit(63 - d->irq, &pd->bmp.mask);
lv1_did_update_interrupt_mask(pd->ppe_id, pd->thread_id);
local_irq_restore(flags);
}
/**
* ps3_chip_eoi - HV end-of-interrupt.
* @virq: The assigned Linux virq.
*
* Calls lv1_end_of_interrupt_ext().
*/
static void ps3_chip_eoi(struct irq_data *d)
{
const struct ps3_private *pd = irq_data_get_irq_chip_data(d);
/* non-IPIs are EOIed here. */
if (!test_bit(63 - d->irq, &pd->ipi_mask))
lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, d->irq);
}
/**
* ps3_irq_chip - Represents the ps3_bmp as a Linux struct irq_chip.
*/
static struct irq_chip ps3_irq_chip = {
.name = "ps3",
.irq_mask = ps3_chip_mask,
.irq_unmask = ps3_chip_unmask,
.irq_eoi = ps3_chip_eoi,
};
/**
* ps3_virq_setup - virq related setup.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @outlet: The HV outlet from the various create outlet routines.
* @virq: The assigned Linux virq.
*
* Calls irq_create_mapping() to get a virq and sets the chip data to
* ps3_private data.
*/
static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq)
{
int result;
struct ps3_private *pd;
/* This defines the default interrupt distribution policy. */
if (cpu == PS3_BINDING_CPU_ANY)
cpu = 0;
pd = &per_cpu(ps3_private, cpu);
*virq = irq_create_mapping(NULL, outlet);
if (*virq == NO_IRQ) {
FAIL("%s:%d: irq_create_mapping failed: outlet %lu\n",
__func__, __LINE__, outlet);
result = -ENOMEM;
goto fail_create;
}
DBG("%s:%d: outlet %lu => cpu %u, virq %u\n", __func__, __LINE__,
outlet, cpu, *virq);
result = irq_set_chip_data(*virq, pd);
if (result) {
FAIL("%s:%d: irq_set_chip_data failed\n",
__func__, __LINE__);
goto fail_set;
}
ps3_chip_mask(irq_get_irq_data(*virq));
return result;
fail_set:
irq_dispose_mapping(*virq);
fail_create:
return result;
}
/**
* ps3_virq_destroy - virq related teardown.
* @virq: The assigned Linux virq.
*
* Clears chip data and calls irq_dispose_mapping() for the virq.
*/
static int ps3_virq_destroy(unsigned int virq)
{
const struct ps3_private *pd = irq_get_chip_data(virq);
DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
irq_set_chip_data(virq, NULL);
irq_dispose_mapping(virq);
DBG("%s:%d <-\n", __func__, __LINE__);
return 0;
}
/**
* ps3_irq_plug_setup - Generic outlet and virq related setup.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @outlet: The HV outlet from the various create outlet routines.
* @virq: The assigned Linux virq.
*
* Sets up virq and connects the irq plug.
*/
int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq)
{
int result;
struct ps3_private *pd;
result = ps3_virq_setup(cpu, outlet, virq);
if (result) {
FAIL("%s:%d: ps3_virq_setup failed\n", __func__, __LINE__);
goto fail_setup;
}
pd = irq_get_chip_data(*virq);
/* Binds outlet to cpu + virq. */
result = lv1_connect_irq_plug_ext(pd->ppe_id, pd->thread_id, *virq,
outlet, 0);
if (result) {
FAIL("%s:%d: lv1_connect_irq_plug_ext failed: %s\n",
__func__, __LINE__, ps3_result(result));
result = -EPERM;
goto fail_connect;
}
return result;
fail_connect:
ps3_virq_destroy(*virq);
fail_setup:
return result;
}
EXPORT_SYMBOL_GPL(ps3_irq_plug_setup);
/**
* ps3_irq_plug_destroy - Generic outlet and virq related teardown.
* @virq: The assigned Linux virq.
*
* Disconnects the irq plug and tears down virq.
* Do not call for system bus event interrupts setup with
* ps3_sb_event_receive_port_setup().
*/
int ps3_irq_plug_destroy(unsigned int virq)
{
int result;
const struct ps3_private *pd = irq_get_chip_data(virq);
DBG("%s:%d: ppe_id %llu, thread_id %llu, virq %u\n", __func__,
__LINE__, pd->ppe_id, pd->thread_id, virq);
ps3_chip_mask(irq_get_irq_data(virq));
result = lv1_disconnect_irq_plug_ext(pd->ppe_id, pd->thread_id, virq);
if (result)
FAIL("%s:%d: lv1_disconnect_irq_plug_ext failed: %s\n",
__func__, __LINE__, ps3_result(result));
ps3_virq_destroy(virq);
return result;
}
EXPORT_SYMBOL_GPL(ps3_irq_plug_destroy);
/**
* ps3_event_receive_port_setup - Setup an event receive port.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @virq: The assigned Linux virq.
*
* The virq can be used with lv1_connect_interrupt_event_receive_port() to
* arrange to receive interrupts from system-bus devices, or with
* ps3_send_event_locally() to signal events.
*/
int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq)
{
int result;
u64 outlet;
result = lv1_construct_event_receive_port(&outlet);
if (result) {
FAIL("%s:%d: lv1_construct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
*virq = NO_IRQ;
return result;
}
result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
EXPORT_SYMBOL_GPL(ps3_event_receive_port_setup);
/**
* ps3_event_receive_port_destroy - Destroy an event receive port.
* @virq: The assigned Linux virq.
*
* Since ps3_event_receive_port_destroy destroys the receive port outlet,
* SB devices need to call disconnect_interrupt_event_receive_port() before
* this.
*/
int ps3_event_receive_port_destroy(unsigned int virq)
{
int result;
DBG(" -> %s:%d virq %u\n", __func__, __LINE__, virq);
ps3_chip_mask(irq_get_irq_data(virq));
result = lv1_destruct_event_receive_port(virq_to_hw(virq));
if (result)
FAIL("%s:%d: lv1_destruct_event_receive_port failed: %s\n",
__func__, __LINE__, ps3_result(result));
/*
* Don't call ps3_virq_destroy() here since ps3_smp_cleanup_cpu()
* calls from interrupt context (smp_call_function) when kexecing.
*/
DBG(" <- %s:%d\n", __func__, __LINE__);
return result;
}
int ps3_send_event_locally(unsigned int virq)
{
return lv1_send_event_locally(virq_to_hw(virq));
}
/**
* ps3_sb_event_receive_port_setup - Setup a system bus event receive port.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @dev: The system bus device instance.
* @virq: The assigned Linux virq.
*
* An event irq represents a virtual device interrupt. The interrupt_id
* coresponds to the software interrupt number.
*/
int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
enum ps3_cpu_binding cpu, unsigned int *virq)
{
/* this should go in system-bus.c */
int result;
result = ps3_event_receive_port_setup(cpu, virq);
if (result)
return result;
result = lv1_connect_interrupt_event_receive_port(dev->bus_id,
dev->dev_id, virq_to_hw(*virq), dev->interrupt_id);
if (result) {
FAIL("%s:%d: lv1_connect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
ps3_event_receive_port_destroy(*virq);
*virq = NO_IRQ;
return result;
}
DBG("%s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
dev->interrupt_id, *virq);
return 0;
}
EXPORT_SYMBOL(ps3_sb_event_receive_port_setup);
int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
unsigned int virq)
{
/* this should go in system-bus.c */
int result;
DBG(" -> %s:%d: interrupt_id %u, virq %u\n", __func__, __LINE__,
dev->interrupt_id, virq);
result = lv1_disconnect_interrupt_event_receive_port(dev->bus_id,
dev->dev_id, virq_to_hw(virq), dev->interrupt_id);
if (result)
FAIL("%s:%d: lv1_disconnect_interrupt_event_receive_port"
" failed: %s\n", __func__, __LINE__,
ps3_result(result));
result = ps3_event_receive_port_destroy(virq);
BUG_ON(result);
/*
* ps3_event_receive_port_destroy() destroys the IRQ plug,
* so don't call ps3_irq_plug_destroy() here.
*/
result = ps3_virq_destroy(virq);
BUG_ON(result);
DBG(" <- %s:%d\n", __func__, __LINE__);
return result;
}
EXPORT_SYMBOL(ps3_sb_event_receive_port_destroy);
/**
* ps3_io_irq_setup - Setup a system bus io irq.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @interrupt_id: The device interrupt id read from the system repository.
* @virq: The assigned Linux virq.
*
* An io irq represents a non-virtualized device interrupt. interrupt_id
* coresponds to the interrupt number of the interrupt controller.
*/
int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
unsigned int *virq)
{
int result;
u64 outlet;
result = lv1_construct_io_irq_outlet(interrupt_id, &outlet);
if (result) {
FAIL("%s:%d: lv1_construct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
EXPORT_SYMBOL_GPL(ps3_io_irq_setup);
int ps3_io_irq_destroy(unsigned int virq)
{
int result;
unsigned long outlet = virq_to_hw(virq);
ps3_chip_mask(irq_get_irq_data(virq));
/*
* lv1_destruct_io_irq_outlet() will destroy the IRQ plug,
* so call ps3_irq_plug_destroy() first.
*/
result = ps3_irq_plug_destroy(virq);
BUG_ON(result);
result = lv1_destruct_io_irq_outlet(outlet);
if (result)
FAIL("%s:%d: lv1_destruct_io_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
EXPORT_SYMBOL_GPL(ps3_io_irq_destroy);
/**
* ps3_vuart_irq_setup - Setup the system virtual uart virq.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @virt_addr_bmp: The caller supplied virtual uart interrupt bitmap.
* @virq: The assigned Linux virq.
*
* The system supports only a single virtual uart, so multiple calls without
* freeing the interrupt will return a wrong state error.
*/
int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
unsigned int *virq)
{
int result;
u64 outlet;
u64 lpar_addr;
BUG_ON(!is_kernel_addr((u64)virt_addr_bmp));
lpar_addr = ps3_mm_phys_to_lpar(__pa(virt_addr_bmp));
result = lv1_configure_virtual_uart_irq(lpar_addr, &outlet);
if (result) {
FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
EXPORT_SYMBOL_GPL(ps3_vuart_irq_setup);
int ps3_vuart_irq_destroy(unsigned int virq)
{
int result;
ps3_chip_mask(irq_get_irq_data(virq));
result = lv1_deconfigure_virtual_uart_irq();
if (result) {
FAIL("%s:%d: lv1_configure_virtual_uart_irq failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
result = ps3_irq_plug_destroy(virq);
BUG_ON(result);
return result;
}
EXPORT_SYMBOL_GPL(ps3_vuart_irq_destroy);
/**
* ps3_spe_irq_setup - Setup an spe virq.
* @cpu: enum ps3_cpu_binding indicating the cpu the interrupt should be
* serviced on.
* @spe_id: The spe_id returned from lv1_construct_logical_spe().
* @class: The spe interrupt class {0,1,2}.
* @virq: The assigned Linux virq.
*
*/
int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
unsigned int class, unsigned int *virq)
{
int result;
u64 outlet;
BUG_ON(class > 2);
result = lv1_get_spe_irq_outlet(spe_id, class, &outlet);
if (result) {
FAIL("%s:%d: lv1_get_spe_irq_outlet failed: %s\n",
__func__, __LINE__, ps3_result(result));
return result;
}
result = ps3_irq_plug_setup(cpu, outlet, virq);
BUG_ON(result);
return result;
}
int ps3_spe_irq_destroy(unsigned int virq)
{
int result;
ps3_chip_mask(irq_get_irq_data(virq));
result = ps3_irq_plug_destroy(virq);
BUG_ON(result);
return result;
}
#define PS3_INVALID_OUTLET ((irq_hw_number_t)-1)
#define PS3_PLUG_MAX 63
#if defined(DEBUG)
static void _dump_64_bmp(const char *header, const u64 *p, unsigned cpu,
const char* func, int line)
{
pr_debug("%s:%d: %s %u {%04llx_%04llx_%04llx_%04llx}\n",
func, line, header, cpu,
*p >> 48, (*p >> 32) & 0xffff, (*p >> 16) & 0xffff,
*p & 0xffff);
}
static void __maybe_unused _dump_256_bmp(const char *header,
const u64 *p, unsigned cpu, const char* func, int line)
{
pr_debug("%s:%d: %s %u {%016llx:%016llx:%016llx:%016llx}\n",
func, line, header, cpu, p[0], p[1], p[2], p[3]);
}
#define dump_bmp(_x) _dump_bmp(_x, __func__, __LINE__)
static void _dump_bmp(struct ps3_private* pd, const char* func, int line)
{
unsigned long flags;
spin_lock_irqsave(&pd->bmp_lock, flags);
_dump_64_bmp("stat", &pd->bmp.status, pd->thread_id, func, line);
_dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
spin_unlock_irqrestore(&pd->bmp_lock, flags);
}
#define dump_mask(_x) _dump_mask(_x, __func__, __LINE__)
static void __maybe_unused _dump_mask(struct ps3_private *pd,
const char* func, int line)
{
unsigned long flags;
spin_lock_irqsave(&pd->bmp_lock, flags);
_dump_64_bmp("mask", (u64*)&pd->bmp.mask, pd->thread_id, func, line);
spin_unlock_irqrestore(&pd->bmp_lock, flags);
}
#else
static void dump_bmp(struct ps3_private* pd) {};
#endif /* defined(DEBUG) */
static int ps3_host_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hwirq)
{
DBG("%s:%d: hwirq %lu, virq %u\n", __func__, __LINE__, hwirq,
virq);
irq_set_chip_and_handler(virq, &ps3_irq_chip, handle_fasteoi_irq);
return 0;
}
static int ps3_host_match(struct irq_domain *h, struct device_node *np)
{
/* Match all */
return 1;
}
static const struct irq_domain_ops ps3_host_ops = {
.map = ps3_host_map,
.match = ps3_host_match,
};
void __init ps3_register_ipi_debug_brk(unsigned int cpu, unsigned int virq)
{
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
set_bit(63 - virq, &pd->ipi_debug_brk_mask);
DBG("%s:%d: cpu %u, virq %u, mask %lxh\n", __func__, __LINE__,
cpu, virq, pd->ipi_debug_brk_mask);
}
void __init ps3_register_ipi_irq(unsigned int cpu, unsigned int virq)
{
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
set_bit(63 - virq, &pd->ipi_mask);
DBG("%s:%d: cpu %u, virq %u, ipi_mask %lxh\n", __func__, __LINE__,
cpu, virq, pd->ipi_mask);
}
static unsigned int ps3_get_irq(void)
{
struct ps3_private *pd = &__get_cpu_var(ps3_private);
u64 x = (pd->bmp.status & pd->bmp.mask);
unsigned int plug;
/* check for ipi break first to stop this cpu ASAP */
if (x & pd->ipi_debug_brk_mask)
x &= pd->ipi_debug_brk_mask;
asm volatile("cntlzd %0,%1" : "=r" (plug) : "r" (x));
plug &= 0x3f;
if (unlikely(plug == NO_IRQ)) {
DBG("%s:%d: no plug found: thread_id %llu\n", __func__,
__LINE__, pd->thread_id);
dump_bmp(&per_cpu(ps3_private, 0));
dump_bmp(&per_cpu(ps3_private, 1));
return NO_IRQ;
}
#if defined(DEBUG)
if (unlikely(plug < NUM_ISA_INTERRUPTS || plug > PS3_PLUG_MAX)) {
dump_bmp(&per_cpu(ps3_private, 0));
dump_bmp(&per_cpu(ps3_private, 1));
BUG();
}
#endif
/* IPIs are EOIed here. */
if (test_bit(63 - plug, &pd->ipi_mask))
lv1_end_of_interrupt_ext(pd->ppe_id, pd->thread_id, plug);
return plug;
}
void __init ps3_init_IRQ(void)
{
int result;
unsigned cpu;
struct irq_domain *host;
host = irq_domain_add_nomap(NULL, PS3_PLUG_MAX + 1, &ps3_host_ops, NULL);
irq_set_default_host(host);
for_each_possible_cpu(cpu) {
struct ps3_private *pd = &per_cpu(ps3_private, cpu);
lv1_get_logical_ppe_id(&pd->ppe_id);
pd->thread_id = get_hard_smp_processor_id(cpu);
spin_lock_init(&pd->bmp_lock);
DBG("%s:%d: ppe_id %llu, thread_id %llu, bmp %lxh\n",
__func__, __LINE__, pd->ppe_id, pd->thread_id,
ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
result = lv1_configure_irq_state_bitmap(pd->ppe_id,
pd->thread_id, ps3_mm_phys_to_lpar(__pa(&pd->bmp)));
if (result)
FAIL("%s:%d: lv1_configure_irq_state_bitmap failed:"
" %s\n", __func__, __LINE__,
ps3_result(result));
}
ppc_md.get_irq = ps3_get_irq;
}
void ps3_shutdown_IRQ(int cpu)
{
int result;
u64 ppe_id;
u64 thread_id = get_hard_smp_processor_id(cpu);
lv1_get_logical_ppe_id(&ppe_id);
result = lv1_configure_irq_state_bitmap(ppe_id, thread_id, 0);
DBG("%s:%d: lv1_configure_irq_state_bitmap (%llu:%llu/%d) %s\n", __func__,
__LINE__, ppe_id, thread_id, cpu, ps3_result(result));
}