- 根目录:
- drivers
- media
- usb
- gspca
- sq905c.c
/*
* SQ905C subdriver
*
* Copyright (C) 2009 Theodore Kilgore
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
*
* This driver uses work done in
* libgphoto2/camlibs/digigr8, Copyright (C) Theodore Kilgore.
*
* This driver has also used as a base the sq905c driver
* and may contain code fragments from it.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define MODULE_NAME "sq905c"
#include <linux/workqueue.h>
#include <linux/slab.h>
#include "gspca.h"
MODULE_AUTHOR("Theodore Kilgore <kilgota@auburn.edu>");
MODULE_DESCRIPTION("GSPCA/SQ905C USB Camera Driver");
MODULE_LICENSE("GPL");
/* Default timeouts, in ms */
#define SQ905C_CMD_TIMEOUT 500
#define SQ905C_DATA_TIMEOUT 1000
/* Maximum transfer size to use. */
#define SQ905C_MAX_TRANSFER 0x8000
#define FRAME_HEADER_LEN 0x50
/* Commands. These go in the "value" slot. */
#define SQ905C_CLEAR 0xa0 /* clear everything */
#define SQ905C_GET_ID 0x14f4 /* Read version number */
#define SQ905C_CAPTURE_LOW 0xa040 /* Starts capture at 160x120 */
#define SQ905C_CAPTURE_MED 0x1440 /* Starts capture at 320x240 */
#define SQ905C_CAPTURE_HI 0x2840 /* Starts capture at 320x240 */
/* For capture, this must go in the "index" slot. */
#define SQ905C_CAPTURE_INDEX 0x110f
/* Structure to hold all of our device specific stuff */
struct sd {
struct gspca_dev gspca_dev; /* !! must be the first item */
const struct v4l2_pix_format *cap_mode;
/* Driver stuff */
struct work_struct work_struct;
struct workqueue_struct *work_thread;
};
/*
* Most of these cameras will do 640x480 and 320x240. 160x120 works
* in theory but gives very poor output. Therefore, not supported.
* The 0x2770:0x9050 cameras have max resolution of 320x240.
*/
static struct v4l2_pix_format sq905c_mode[] = {
{ 320, 240, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
.bytesperline = 320,
.sizeimage = 320 * 240,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 0},
{ 640, 480, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
.bytesperline = 640,
.sizeimage = 640 * 480,
.colorspace = V4L2_COLORSPACE_SRGB,
.priv = 0}
};
/* Send a command to the camera. */
static int sq905c_command(struct gspca_dev *gspca_dev, u16 command, u16 index)
{
int ret;
ret = usb_control_msg(gspca_dev->dev,
usb_sndctrlpipe(gspca_dev->dev, 0),
USB_REQ_SYNCH_FRAME, /* request */
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
command, index, NULL, 0,
SQ905C_CMD_TIMEOUT);
if (ret < 0) {
pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
return ret;
}
return 0;
}
static int sq905c_read(struct gspca_dev *gspca_dev, u16 command, u16 index,
int size)
{
int ret;
ret = usb_control_msg(gspca_dev->dev,
usb_rcvctrlpipe(gspca_dev->dev, 0),
USB_REQ_SYNCH_FRAME, /* request */
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
command, index, gspca_dev->usb_buf, size,
SQ905C_CMD_TIMEOUT);
if (ret < 0) {
pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
return ret;
}
return 0;
}
/*
* This function is called as a workqueue function and runs whenever the camera
* is streaming data. Because it is a workqueue function it is allowed to sleep
* so we can use synchronous USB calls. To avoid possible collisions with other
* threads attempting to use gspca_dev->usb_buf we take the usb_lock when
* performing USB operations using it. In practice we don't really need this
* as the camera doesn't provide any controls.
*/
static void sq905c_dostream(struct work_struct *work)
{
struct sd *dev = container_of(work, struct sd, work_struct);
struct gspca_dev *gspca_dev = &dev->gspca_dev;
int bytes_left; /* bytes remaining in current frame. */
int data_len; /* size to use for the next read. */
int act_len;
int packet_type;
int ret;
u8 *buffer;
buffer = kmalloc(SQ905C_MAX_TRANSFER, GFP_KERNEL | GFP_DMA);
if (!buffer) {
pr_err("Couldn't allocate USB buffer\n");
goto quit_stream;
}
while (gspca_dev->present && gspca_dev->streaming) {
#ifdef CONFIG_PM
if (gspca_dev->frozen)
break;
#endif
/* Request the header, which tells the size to download */
ret = usb_bulk_msg(gspca_dev->dev,
usb_rcvbulkpipe(gspca_dev->dev, 0x81),
buffer, FRAME_HEADER_LEN, &act_len,
SQ905C_DATA_TIMEOUT);
PDEBUG(D_STREAM,
"Got %d bytes out of %d for header",
act_len, FRAME_HEADER_LEN);
if (ret < 0 || act_len < FRAME_HEADER_LEN)
goto quit_stream;
/* size is read from 4 bytes starting 0x40, little endian */
bytes_left = buffer[0x40]|(buffer[0x41]<<8)|(buffer[0x42]<<16)
|(buffer[0x43]<<24);
PDEBUG(D_STREAM, "bytes_left = 0x%x", bytes_left);
/* We keep the header. It has other information, too. */
packet_type = FIRST_PACKET;
gspca_frame_add(gspca_dev, packet_type,
buffer, FRAME_HEADER_LEN);
while (bytes_left > 0 && gspca_dev->present) {
data_len = bytes_left > SQ905C_MAX_TRANSFER ?
SQ905C_MAX_TRANSFER : bytes_left;
ret = usb_bulk_msg(gspca_dev->dev,
usb_rcvbulkpipe(gspca_dev->dev, 0x81),
buffer, data_len, &act_len,
SQ905C_DATA_TIMEOUT);
if (ret < 0 || act_len < data_len)
goto quit_stream;
PDEBUG(D_STREAM,
"Got %d bytes out of %d for frame",
data_len, bytes_left);
bytes_left -= data_len;
if (bytes_left == 0)
packet_type = LAST_PACKET;
else
packet_type = INTER_PACKET;
gspca_frame_add(gspca_dev, packet_type,
buffer, data_len);
}
}
quit_stream:
if (gspca_dev->present) {
mutex_lock(&gspca_dev->usb_lock);
sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
mutex_unlock(&gspca_dev->usb_lock);
}
kfree(buffer);
}
/* This function is called at probe time just before sd_init */
static int sd_config(struct gspca_dev *gspca_dev,
const struct usb_device_id *id)
{
struct cam *cam = &gspca_dev->cam;
struct sd *dev = (struct sd *) gspca_dev;
int ret;
PDEBUG(D_PROBE,
"SQ9050 camera detected"
" (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0);
if (ret < 0) {
PERR("Get version command failed");
return ret;
}
ret = sq905c_read(gspca_dev, 0xf5, 0, 20);
if (ret < 0) {
PERR("Reading version command failed");
return ret;
}
/* Note we leave out the usb id and the manufacturing date */
PDEBUG(D_PROBE,
"SQ9050 ID string: %02x - %*ph",
gspca_dev->usb_buf[3], 6, gspca_dev->usb_buf + 14);
cam->cam_mode = sq905c_mode;
cam->nmodes = 2;
if (gspca_dev->usb_buf[15] == 0)
cam->nmodes = 1;
/* We don't use the buffer gspca allocates so make it small. */
cam->bulk_size = 32;
cam->bulk = 1;
INIT_WORK(&dev->work_struct, sq905c_dostream);
return 0;
}
/* called on streamoff with alt==0 and on disconnect */
/* the usb_lock is held at entry - restore on exit */
static void sd_stop0(struct gspca_dev *gspca_dev)
{
struct sd *dev = (struct sd *) gspca_dev;
/* wait for the work queue to terminate */
mutex_unlock(&gspca_dev->usb_lock);
/* This waits for sq905c_dostream to finish */
destroy_workqueue(dev->work_thread);
dev->work_thread = NULL;
mutex_lock(&gspca_dev->usb_lock);
}
/* this function is called at probe and resume time */
static int sd_init(struct gspca_dev *gspca_dev)
{
int ret;
/* connect to the camera and reset it. */
ret = sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
return ret;
}
/* Set up for getting frames. */
static int sd_start(struct gspca_dev *gspca_dev)
{
struct sd *dev = (struct sd *) gspca_dev;
int ret;
dev->cap_mode = gspca_dev->cam.cam_mode;
/* "Open the shutter" and set size, to start capture */
switch (gspca_dev->width) {
case 640:
PDEBUG(D_STREAM, "Start streaming at high resolution");
dev->cap_mode++;
ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_HI,
SQ905C_CAPTURE_INDEX);
break;
default: /* 320 */
PDEBUG(D_STREAM, "Start streaming at medium resolution");
ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_MED,
SQ905C_CAPTURE_INDEX);
}
if (ret < 0) {
PERR("Start streaming command failed");
return ret;
}
/* Start the workqueue function to do the streaming */
dev->work_thread = create_singlethread_workqueue(MODULE_NAME);
queue_work(dev->work_thread, &dev->work_struct);
return 0;
}
/* Table of supported USB devices */
static const struct usb_device_id device_table[] = {
{USB_DEVICE(0x2770, 0x905c)},
{USB_DEVICE(0x2770, 0x9050)},
{USB_DEVICE(0x2770, 0x9051)},
{USB_DEVICE(0x2770, 0x9052)},
{USB_DEVICE(0x2770, 0x913d)},
{}
};
MODULE_DEVICE_TABLE(usb, device_table);
/* sub-driver description */
static const struct sd_desc sd_desc = {
.name = MODULE_NAME,
.config = sd_config,
.init = sd_init,
.start = sd_start,
.stop0 = sd_stop0,
};
/* -- device connect -- */
static int sd_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
return gspca_dev_probe(intf, id,
&sd_desc,
sizeof(struct sd),
THIS_MODULE);
}
static struct usb_driver sd_driver = {
.name = MODULE_NAME,
.id_table = device_table,
.probe = sd_probe,
.disconnect = gspca_disconnect,
#ifdef CONFIG_PM
.suspend = gspca_suspend,
.resume = gspca_resume,
.reset_resume = gspca_resume,
#endif
};
module_usb_driver(sd_driver);