Kernel  |  3.10

下载     查看原文件
C++程序  |  209行  |  5.5 KB
/*
 * Copyright (c) 2010-2011 Atheros Communications Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */

#include "hw.h"
#include "hw-ops.h"
#include "ar9003_phy.h"
#include "ar9003_rtt.h"

#define RTT_RESTORE_TIMEOUT          1000
#define RTT_ACCESS_TIMEOUT           100
#define RTT_BAD_VALUE                0x0bad0bad

/*
 * RTT (Radio Retention Table) hardware implementation information
 *
 * There is an internal table (i.e. the rtt) for each chain (or bank).
 * Each table contains 6 entries and each entry is corresponding to
 * a specific calibration parameter as depicted below.
 *  0~2 - DC offset DAC calibration: loop, low, high (offsetI/Q_...)
 *  3   - Filter cal (filterfc)
 *  4   - RX gain settings
 *  5   - Peak detector offset calibration (agc_caldac)
 */

void ar9003_hw_rtt_enable(struct ath_hw *ah)
{
	REG_WRITE(ah, AR_PHY_RTT_CTRL, 1);
}

void ar9003_hw_rtt_disable(struct ath_hw *ah)
{
	REG_WRITE(ah, AR_PHY_RTT_CTRL, 0);
}

void ar9003_hw_rtt_set_mask(struct ath_hw *ah, u32 rtt_mask)
{
	REG_RMW_FIELD(ah, AR_PHY_RTT_CTRL,
		      AR_PHY_RTT_CTRL_RESTORE_MASK, rtt_mask);
}

bool ar9003_hw_rtt_force_restore(struct ath_hw *ah)
{
	if (!ath9k_hw_wait(ah, AR_PHY_RTT_CTRL,
			   AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE,
			   0, RTT_RESTORE_TIMEOUT))
		return false;

	REG_RMW_FIELD(ah, AR_PHY_RTT_CTRL,
		      AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE, 1);

	if (!ath9k_hw_wait(ah, AR_PHY_RTT_CTRL,
			   AR_PHY_RTT_CTRL_FORCE_RADIO_RESTORE,
			   0, RTT_RESTORE_TIMEOUT))
		return false;

	return true;
}

static void ar9003_hw_rtt_load_hist_entry(struct ath_hw *ah, u8 chain,
					  u32 index, u32 data28)
{
	u32 val;

	val = SM(data28, AR_PHY_RTT_SW_RTT_TABLE_DATA);
	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain), val);

	val = SM(0, AR_PHY_RTT_SW_RTT_TABLE_ACCESS) |
	      SM(1, AR_PHY_RTT_SW_RTT_TABLE_WRITE) |
	      SM(index, AR_PHY_RTT_SW_RTT_TABLE_ADDR);
	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
	udelay(1);

	val |= SM(1, AR_PHY_RTT_SW_RTT_TABLE_ACCESS);
	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
	udelay(1);

	if (!ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
			   AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
			   RTT_ACCESS_TIMEOUT))
		return;

	val &= ~SM(1, AR_PHY_RTT_SW_RTT_TABLE_WRITE);
	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
	udelay(1);

	ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
		      AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
		      RTT_ACCESS_TIMEOUT);
}

void ar9003_hw_rtt_load_hist(struct ath_hw *ah)
{
	int chain, i;

	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
		if (!(ah->rxchainmask & (1 << chain)))
			continue;
		for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++) {
			ar9003_hw_rtt_load_hist_entry(ah, chain, i,
					      ah->caldata->rtt_table[chain][i]);
			ath_dbg(ath9k_hw_common(ah), CALIBRATE,
				"Load RTT value at idx %d, chain %d: 0x%x\n",
				i, chain, ah->caldata->rtt_table[chain][i]);
		}
	}
}

static int ar9003_hw_rtt_fill_hist_entry(struct ath_hw *ah, u8 chain, u32 index)
{
	u32 val;

	val = SM(0, AR_PHY_RTT_SW_RTT_TABLE_ACCESS) |
	      SM(0, AR_PHY_RTT_SW_RTT_TABLE_WRITE) |
	      SM(index, AR_PHY_RTT_SW_RTT_TABLE_ADDR);

	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
	udelay(1);

	val |= SM(1, AR_PHY_RTT_SW_RTT_TABLE_ACCESS);
	REG_WRITE(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain), val);
	udelay(1);

	if (!ath9k_hw_wait(ah, AR_PHY_RTT_TABLE_SW_INTF_B(chain),
			   AR_PHY_RTT_SW_RTT_TABLE_ACCESS, 0,
			   RTT_ACCESS_TIMEOUT))
		return RTT_BAD_VALUE;

	val = MS(REG_READ(ah, AR_PHY_RTT_TABLE_SW_INTF_1_B(chain)),
		 AR_PHY_RTT_SW_RTT_TABLE_DATA);


	return val;
}

void ar9003_hw_rtt_fill_hist(struct ath_hw *ah)
{
	int chain, i;

	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
		if (!(ah->rxchainmask & (1 << chain)))
			continue;
		for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++) {
			ah->caldata->rtt_table[chain][i] =
				ar9003_hw_rtt_fill_hist_entry(ah, chain, i);
			ath_dbg(ath9k_hw_common(ah), CALIBRATE,
				"RTT value at idx %d, chain %d is: 0x%x\n",
				i, chain, ah->caldata->rtt_table[chain][i]);
		}
	}

	ah->caldata->rtt_done = true;
}

void ar9003_hw_rtt_clear_hist(struct ath_hw *ah)
{
	int chain, i;

	for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) {
		if (!(ah->rxchainmask & (1 << chain)))
			continue;
		for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++)
			ar9003_hw_rtt_load_hist_entry(ah, chain, i, 0);
	}

	if (ah->caldata)
		ah->caldata->rtt_done = false;
}

bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan)
{
	bool restore;

	if (!ah->caldata)
		return false;

	if (!ah->caldata->rtt_done)
		return false;

	ar9003_hw_rtt_enable(ah);
	ar9003_hw_rtt_set_mask(ah, 0x10);

	if (!ath9k_hw_rfbus_req(ah)) {
		ath_err(ath9k_hw_common(ah), "Could not stop baseband\n");
		restore = false;
		goto fail;
	}

	ar9003_hw_rtt_load_hist(ah);
	restore = ar9003_hw_rtt_force_restore(ah);

fail:
	ath9k_hw_rfbus_done(ah);
	ar9003_hw_rtt_disable(ah);
	return restore;
}