- 根目录:
- drivers
- net
- wireless
- prism54
- isl_38xx.h
/*
* Copyright (C) 2002 Intersil Americas Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef _ISL_38XX_H
#define _ISL_38XX_H
#include <asm/io.h>
#include <asm/byteorder.h>
#define ISL38XX_CB_RX_QSIZE 8
#define ISL38XX_CB_TX_QSIZE 32
/* ISL38XX Access Point Specific definitions */
#define ISL38XX_MAX_WDS_LINKS 8
/* ISL38xx Client Specific definitions */
#define ISL38XX_PSM_ACTIVE_STATE 0
#define ISL38XX_PSM_POWERSAVE_STATE 1
/* ISL38XX Host Interface Definitions */
#define ISL38XX_PCI_MEM_SIZE 0x02000
#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000
#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000
#define ISL38XX_WRITEIO_DELAY 10 /* in us */
#define ISL38XX_RESET_DELAY 50 /* in ms */
#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */
#define ISL38XX_MAX_WAIT_CYCLES 10
/* PCI Memory Area */
#define ISL38XX_HARDWARE_REG 0x0000
#define ISL38XX_CARDBUS_CIS 0x0800
#define ISL38XX_DIRECT_MEM_WIN 0x1000
/* Hardware registers */
#define ISL38XX_DEV_INT_REG 0x0000
#define ISL38XX_INT_IDENT_REG 0x0010
#define ISL38XX_INT_ACK_REG 0x0014
#define ISL38XX_INT_EN_REG 0x0018
#define ISL38XX_GEN_PURP_COM_REG_1 0x0020
#define ISL38XX_GEN_PURP_COM_REG_2 0x0024
#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1
#define ISL38XX_DIR_MEM_BASE_REG 0x0030
#define ISL38XX_CTRL_STAT_REG 0x0078
/* High end mobos queue up pci writes, the following
* is used to "read" from after a write to force flush */
#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG
/**
* isl38xx_w32_flush - PCI iomem write helper
* @base: (host) memory base address of the device
* @val: 32bit value (host order) to write
* @offset: byte offset into @base to write value to
*
* This helper takes care of writing a 32bit datum to the
* specified offset into the device's pci memory space, and making sure
* the pci memory buffers get flushed by performing one harmless read
* from the %ISL38XX_PCI_POSTING_FLUSH offset.
*/
static inline void
isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
{
writel(val, base + offset);
(void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
}
/* Device Interrupt register bits */
#define ISL38XX_DEV_INT_RESET 0x0001
#define ISL38XX_DEV_INT_UPDATE 0x0002
#define ISL38XX_DEV_INT_WAKEUP 0x0008
#define ISL38XX_DEV_INT_SLEEP 0x0010
/* Interrupt Identification/Acknowledge/Enable register bits */
#define ISL38XX_INT_IDENT_UPDATE 0x0002
#define ISL38XX_INT_IDENT_INIT 0x0004
#define ISL38XX_INT_IDENT_WAKEUP 0x0008
#define ISL38XX_INT_IDENT_SLEEP 0x0010
#define ISL38XX_INT_SOURCES 0x001E
/* Control/Status register bits */
/* Looks like there are other meaningful bits
0x20004400 seen in normal operation,
0x200044db at 'timeout waiting for mgmt response'
*/
#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
#define ISL38XX_CTRL_STAT_RESET 0x10000000
#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000
/* Control Block definitions */
#define ISL38XX_CB_RX_DATA_LQ 0
#define ISL38XX_CB_TX_DATA_LQ 1
#define ISL38XX_CB_RX_DATA_HQ 2
#define ISL38XX_CB_TX_DATA_HQ 3
#define ISL38XX_CB_RX_MGMTQ 4
#define ISL38XX_CB_TX_MGMTQ 5
#define ISL38XX_CB_QCOUNT 6
#define ISL38XX_CB_MGMT_QSIZE 4
#define ISL38XX_MIN_QTHRESHOLD 4 /* fragments */
/* Memory Manager definitions */
#define MGMT_FRAME_SIZE 1500 /* >= size struct obj_bsslist */
#define MGMT_TX_FRAME_COUNT 24 /* max 4 + spare 4 + 8 init */
#define MGMT_RX_FRAME_COUNT 24 /* 4*4 + spare 8 */
#define MGMT_FRAME_COUNT (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
#define CONTROL_BLOCK_SIZE 1024 /* should be enough */
#define PSM_FRAME_SIZE 1536
#define PSM_MINIMAL_STATION_COUNT 64
#define PSM_FRAME_COUNT PSM_MINIMAL_STATION_COUNT
#define PSM_BUFFER_SIZE PSM_FRAME_SIZE * PSM_FRAME_COUNT
#define MAX_TRAP_RX_QUEUE 4
#define HOST_MEM_BLOCK CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE
/* Fragment package definitions */
#define FRAGMENT_FLAG_MF 0x0001
#define MAX_FRAGMENT_SIZE 1536
/* In monitor mode frames have a header. I don't know exactly how big those
* frame can be but I've never seen any frame bigger than 1584... :
*/
#define MAX_FRAGMENT_SIZE_RX 1600
typedef struct {
__le32 address; /* physical address on host */
__le16 size; /* packet size */
__le16 flags; /* set of bit-wise flags */
} isl38xx_fragment;
struct isl38xx_cb {
__le32 driver_curr_frag[ISL38XX_CB_QCOUNT];
__le32 device_curr_frag[ISL38XX_CB_QCOUNT];
isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
};
typedef struct isl38xx_cb isl38xx_control_block;
/* determine number of entries currently in queue */
int isl38xx_in_queue(isl38xx_control_block *cb, int queue);
void isl38xx_disable_interrupts(void __iomem *);
void isl38xx_enable_common_interrupts(void __iomem *);
void isl38xx_handle_sleep_request(isl38xx_control_block *, int *,
void __iomem *);
void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void __iomem *);
void isl38xx_trigger_device(int, void __iomem *);
void isl38xx_interface_reset(void __iomem *, dma_addr_t);
#endif /* _ISL_38XX_H */