1. 根目录:
2. drivers
3. staging
4. bcm
5. Debug.h

/*
 * Debug.h
 *
 * Dynamic (runtime) debug framework implementation.
 * -kaiwan.
 */
#ifndef _DEBUG_H
#define _DEBUG_H
#include <linux/string.h>
#define NONE 0xFFFF

/* TYPE and SUBTYPE
 * Define valid TYPE (or category or code-path, however you like to think of it)
 * and SUBTYPE s.
 * Type and SubType are treated as bitmasks.
 */
#define DBG_TYPE_INITEXIT	(1 << 0)	/* 1 */
#define DBG_TYPE_TX		(1 << 1)	/* 2 */
#define DBG_TYPE_RX		(1 << 2)	/* 4 */
#define DBG_TYPE_OTHERS		(1 << 3)	/* 8 */
#define NUMTYPES		4

/* -SUBTYPEs for TX :  TYPE is DBG_TYPE_TX -----//
 * Transmit.c ,Arp.c, LeakyBucket.c, And Qos.c
 * total 17 macros
 */
/* Transmit.c */
#define TX		1
#define MP_SEND		(TX << 0)
#define NEXT_SEND	(TX << 1)
#define TX_FIFO		(TX << 2)
#define TX_CONTROL	(TX << 3)

/* Arp.c */
#define IP_ADDR		(TX << 4)
#define ARP_REQ		(TX << 5)
#define ARP_RESP	(TX << 6)

/* Leakybucket.c */
#define TOKEN_COUNTS	(TX << 8)
#define CHECK_TOKENS	(TX << 9)
#define TX_PACKETS	(TX << 10)
#define TIMER		(TX << 11)

/* Qos.c */
#define QOS		TX
#define QUEUE_INDEX	(QOS << 12)
#define IPV4_DBG	(QOS << 13)
#define IPV6_DBG	(QOS << 14)
#define PRUNE_QUEUE	(QOS << 15)
#define SEND_QUEUE	(QOS << 16)

/* TX_Misc */
#define TX_OSAL_DBG	(TX << 17)

/* --SUBTYPEs for ------INIT & EXIT---------------------
 * ------------ TYPE is DBG_TYPE_INITEXIT -----//
 * DriverEntry.c, bcmfwup.c, ChipDetectTask.c, HaltnReset.c, InterfaceDDR.c
 */
#define MP		1
#define DRV_ENTRY	(MP << 0)
#define MP_INIT		(MP << 1)
#define READ_REG	(MP << 3)
#define DISPATCH	(MP << 2)
#define CLAIM_ADAP	(MP << 4)
#define REG_IO_PORT	(MP << 5)
#define INIT_DISP	(MP << 6)
#define RX_INIT		(MP << 7)

/* -SUBTYPEs for --RX----------------------------------
 * ------------RX  :  TYPE is DBG_TYPE_RX -----//
 * Receive.c
 */
#define RX		1
#define RX_DPC		(RX << 0)
#define RX_CTRL		(RX << 3)
#define RX_DATA		(RX << 4)
#define MP_RETURN	(RX << 1)
#define LINK_MSG	(RX << 2)

/* -SUBTYPEs for ----OTHER ROUTINES------------------
 * ------------OTHERS  :  TYPE is DBG_TYPE_OTHER -----//
 * HaltnReset,CheckForHang,PnP,Misc,CmHost
 * total 12 macros
 */
#define OTHERS		1
#define ISR		OTHERS
#define MP_DPC		(ISR << 0)

/* HaltnReset.c */
#define HALT		OTHERS
#define MP_HALT		(HALT << 1)
#define CHECK_HANG	(HALT << 2)
#define MP_RESET	(HALT << 3)
#define MP_SHUTDOWN	(HALT << 4)

/* pnp.c */
#define PNP		OTHERS
#define MP_PNP		(PNP << 5)

/* Misc.c */
#define MISC		OTHERS
#define DUMP_INFO	(MISC << 6)
#define CLASSIFY	(MISC << 7)
#define LINK_UP_MSG	(MISC << 8)
#define CP_CTRL_PKT	(MISC << 9)
#define DUMP_CONTROL	(MISC << 10)
#define LED_DUMP_INFO	(MISC << 11)

/* CmHost.c */
#define CMHOST		OTHERS
#define SERIAL		(OTHERS << 12)
#define IDLE_MODE	(OTHERS << 13)
#define WRM		(OTHERS << 14)
#define RDM		(OTHERS << 15)

/* TODO - put PHS_SEND in Tx PHS_RECEIVE in Rx path ? */
#define PHS_SEND	(OTHERS << 16)
#define PHS_RECEIVE	(OTHERS << 17)
#define PHS_MODULE	(OTHERS << 18)

#define INTF_INIT	(OTHERS << 19)
#define INTF_ERR	(OTHERS << 20)
#define INTF_WARN	(OTHERS << 21)
#define INTF_NORM	(OTHERS << 22)

#define IRP_COMPLETION		(OTHERS << 23)
#define SF_DESCRIPTOR_CNTS	(OTHERS << 24)
#define PHS_DISPATCH		(OTHERS << 25)
#define OSAL_DBG		(OTHERS << 26)
#define NVM_RW			(OTHERS << 27)

#define HOST_MIBS	(OTHERS << 28)
#define CONN_MSG	(CMHOST << 29)

/* Debug level
 * We have 8 debug levels, in (numerical) increasing order of verbosity.
 * IMP: Currently implementing ONLY DBG_LVL_ALL , i.e. , all debug prints will
 * appear (of course, iff global debug flag is ON and we match the Type and SubType).
 * Finer granularity debug levels are currently not in use, although the feature exists.
 *
 * Another way to say this:
 * All the debug prints currently have 'debug_level' set to DBG_LVL_ALL .
 * You can compile-time change that to any of the below, if you wish to. However, as of now, there's
 * no dynamic facility to have the userspace 'TestApp' set debug_level. Slated for future expansion.
 */
#define BCM_ALL		7
#define	BCM_LOW		6
#define	BCM_PRINT	5
#define	BCM_NORMAL	4
#define	BCM_MEDIUM	3
#define	BCM_SCREAM	2
#define	BCM_ERR		1
/* Not meant for developer in debug prints.
 * To be used to disable all prints by setting the DBG_LVL_CURR to this value
 */
#define	BCM_NONE	0

/* The current driver logging level.
 * Everything at this level and (numerically) lower (meaning higher prio)
 * is logged.
 * Replace 'BCM_ALL' in the DBG_LVL_CURR macro with the logging level desired.
 * For eg. to set the logging level to 'errors only' use:
 *	 #define DBG_LVL_CURR	(BCM_ERR)
 */

#define DBG_LVL_CURR	(BCM_ALL)
#define DBG_LVL_ALL	BCM_ALL

/* ---Userspace mapping of Debug State.
 * Delibrately matches that of the Windows driver..
 * The TestApp's ioctl passes this struct to us.
 */
struct bcm_user_debug_state {
	unsigned int Subtype, Type;
	unsigned int OnOff;
/*	unsigned int debug_level; future expansion */
} __packed;

/* ---Kernel-space mapping of Debug State */
struct bcm_debug_state {
	unsigned int type;
	/* A bitmap of 32 bits for Subtype per Type.
	 * Valid indexes in 'subtype' array are *only* 1,2,4 and 8,
	 * corresponding to valid Type values. Hence we use the 'Type' field
	 * as the index value, ignoring the array entries 0,3,5,6,7 !
	 */
	unsigned int subtype[(NUMTYPES*2)+1];
	unsigned int debug_level;
};
/* Instantiated in the Adapter structure
 * We'll reuse the debug level parameter to include a bit (the MSB) to indicate whether or not
 * we want the function's name printed.
 */
#define DBG_NO_FUNC_PRINT	(1 << 31)
#define DBG_LVL_BITMASK		0xFF

/* --- Only for direct printk's; "hidden" to API. */
#define DBG_TYPE_PRINTK		3

#define BCM_DEBUG_PRINT(Adapter, Type, SubType, dbg_level, string, args...) \
	do {								\
		if (DBG_TYPE_PRINTK == Type)				\
			pr_info("%s:" string, __func__, ##args);	\
		else if (Adapter &&					\
			(dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level && \
			(Type & Adapter->stDebugState.type) &&		\
			(SubType & Adapter->stDebugState.subtype[Type])) { \
			if (dbg_level & DBG_NO_FUNC_PRINT)		\
				pr_debug("%s:\n", string);	\
			else						\
				pr_debug("%s:\n" string, __func__, ##args); \
		}							\
	} while (0)

#define BCM_DEBUG_PRINT_BUFFER(Adapter, Type, SubType, dbg_level,  buffer, bufferlen) \
	do {								\
		if (DBG_TYPE_PRINTK == Type ||				\
			(Adapter &&					\
				(dbg_level & DBG_LVL_BITMASK) <= Adapter->stDebugState.debug_level  && \
				(Type & Adapter->stDebugState.type) &&	\
				(SubType & Adapter->stDebugState.subtype[Type]))) { \
			pr_debug("%s:\n", __func__);			\
			print_hex_dump(KERN_DEBUG, " ", DUMP_PREFIX_OFFSET, \
				16, 1, buffer, bufferlen, false);	\
		}							\
	} while (0)

#define BCM_SHOW_DEBUG_BITMAP(Adapter) do {			\
	int i;							\
	for (i = 0; i < (NUMTYPES * 2) + 1; i++) {		\
		if ((i == 1) || (i == 2) || (i == 4) || (i == 8)) {		\
			/* CAUTION! Forcefully turn on ALL debug paths and subpaths! \
			 * Adapter->stDebugState.subtype[i] = 0xffffffff; \
			 */ \
			BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "subtype[%d] = 0x%08x\n",	\
					i, Adapter->stDebugState.subtype[i]); \
		}	\
	}		\
} while (0)

#endif