- 根目录:
- drivers
- staging
- bcm
- Ioctl.h
#ifndef _IOCTL_H_
#define _IOCTL_H_
struct bcm_rdm_buffer {
unsigned long Register;
unsigned long Length;
} __packed;
struct bcm_wrm_buffer {
unsigned long Register;
unsigned long Length;
unsigned char Data[4];
} __packed;
struct bcm_ioctl_buffer {
void __user *InputBuffer;
unsigned long InputLength;
void __user *OutputBuffer;
unsigned long OutputLength;
} __packed;
struct bcm_gpio_info {
unsigned int uiGpioNumber; /* valid numbers 0-15 */
unsigned int uiGpioValue; /* 1 set ; 0 not set */
} __packed;
struct bcm_user_thread_req {
/* 0->Inactivate LED thread. */
/* 1->Activate the LED thread */
unsigned int ThreadState;
} __packed;
#define LED_THREAD_ACTIVATION_REQ 1
#define BCM_IOCTL 'k'
#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801, int)
#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int)
#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int)
#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)
#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)
#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)
#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)
#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int)
#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int)
#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int)
#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int)
#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int)
#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int)
#define IOCTL_GET_STATISTICS_POINTER _IOW(BCM_IOCTL, 0x80E, int)
#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int)
#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int)
#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int)
#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int)
#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char)
#define IOCTL_CLOSE_NOTIFICATION _IO(BCM_IOCTL, 0x814)
#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815)
#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, struct bcm_ioctl_buffer)
#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816)
#define IOCTL_CINR_LEVEL_REQ _IOW(BCM_IOCTL, 0x817, char)
#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817, char)
#define IOCTL_BE_BUCKET_SIZE _IOW(BCM_IOCTL, 0x818, unsigned long)
#define IOCTL_RTPS_BUCKET_SIZE _IOW(BCM_IOCTL, 0x819, unsigned long)
#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long)
#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821)
#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int)
#define IOCTL_BCM_GET_DRIVER_VERSION _IOR(BCM_IOCTL, 0x829, int)
#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int)
#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int)
#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int)
#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int)
#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int)
#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int)
#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int)
#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char)
#define IOCTL_BCM_REGISTER_READ_PRIVATE _IOW(BCM_IOCTL, 0x827, char)
#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, struct bcm_ioctl_buffer)
#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int)
#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int)
#define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE _IOR(BCM_IOCTL, 0x860, int)
#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int)
#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int)
#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int)
#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int)
#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int)
#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int)
#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int)
#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int)
#define IOCTL_BCM_FLASH2X_SECTION_WRITE _IOW(BCM_IOCTL, 0x866, int)
#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL, 0x867, int)
#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL, 0x868, int)
#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869)
#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870, int)
#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)
#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)
#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)
#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int)
#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int)
#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int)
#define IOCTL_BCM_GPIO_MULTI_REQUEST _IOW(BCM_IOCTL, 0x82D, struct bcm_ioctl_buffer)
#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, struct bcm_ioctl_buffer)
enum bcm_interface_type {
BCM_MII,
BCM_CARDBUS,
BCM_USB,
BCM_SDIO,
BCM_PCMCIA
};
struct bcm_driver_info {
enum bcm_nvm_type u32NVMType;
unsigned int MaxRDMBufferSize;
enum bcm_interface_type u32InterfaceType;
unsigned int u32DSDStartOffset;
unsigned int u32RxAlignmentCorrection;
unsigned int u32Reserved[10];
};
struct bcm_nvm_readwrite {
void __user *pBuffer;
uint32_t uiOffset;
uint32_t uiNumBytes;
bool bVerify;
};
struct bcm_bulk_wrm_buffer {
unsigned long Register;
unsigned long SwapEndian;
unsigned long Values[1];
};
enum bcm_flash2x_section_val {
NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
ISO_IMAGE1,
ISO_IMAGE2,
DSD0,
DSD1,
DSD2,
VSA0,
VSA1,
VSA2,
SCSI,
CONTROL_SECTION,
ISO_IMAGE1_PART2,
ISO_IMAGE1_PART3,
ISO_IMAGE2_PART2,
ISO_IMAGE2_PART3,
TOTAL_SECTIONS
};
/*
* Structure used for READ/WRITE Flash Map2.x
*/
struct bcm_flash2x_readwrite {
enum bcm_flash2x_section_val Section; /* which section has to be read/written */
u32 offset; /* Offset within Section. */
u32 numOfBytes; /* NOB from the offset */
u32 bVerify;
void __user *pDataBuff; /* Buffer for reading/writing */
};
/*
* This structure is used for coping one section to other.
* there are two ways to copy one section to other.
* it NOB =0, complete section will be copied on to other.
* if NOB !=0, only NOB will be copied from the given offset.
*/
struct bcm_flash2x_copy_section {
enum bcm_flash2x_section_val SrcSection;
enum bcm_flash2x_section_val DstSection;
u32 offset;
u32 numOfBytes;
};
/*
* This section provide the complete bitmap of the Flash.
* using this map lib/APP will isssue read/write command.
* Fields are defined as :
* Bit [0] = section is present //1:present, 0: Not present
* Bit [1] = section is valid //1: valid, 0: not valid
* Bit [2] = Section is R/W //0: RW, 1: RO
* Bit [3] = Section is Active or not 1 means Active, 0->inactive
* Bit [7...3] = Reserved
*/
struct bcm_flash2x_bitmap {
unsigned char ISO_IMAGE1;
unsigned char ISO_IMAGE2;
unsigned char DSD0;
unsigned char DSD1;
unsigned char DSD2;
unsigned char VSA0;
unsigned char VSA1;
unsigned char VSA2;
unsigned char SCSI;
unsigned char CONTROL_SECTION;
/* Reserved for future use */
unsigned char Reserved0;
unsigned char Reserved1;
unsigned char Reserved2;
};
struct bcm_time_elapsed {
u64 ul64TimeElapsedSinceNetEntry;
u32 uiReserved[4];
};
enum {
WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
MAX_IDX
};
struct bcm_gpio_multi_info {
unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
unsigned int uiGPIOMask; /* set the correspondig bit to 1 to access GPIO */
unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
} __packed;
struct bcm_gpio_multi_mode {
unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
unsigned int uiGPIOMask; /* GPIO mask to set mode */
} __packed;
#endif