- 根目录:
- drivers
- staging
- cxt1e1
- musycc.h
#ifndef _INC_MUSYCC_H_
#define _INC_MUSYCC_H_
/*-----------------------------------------------------------------------------
* musycc.h - Multichannel Synchronous Communications Controller
* CN8778/8474A/8472A/8471A
*
* Copyright (C) 2002-2005 SBE, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* For further information, contact via email: support@sbei.com
* SBE, Inc. San Ramon, California U.S.A.
*-----------------------------------------------------------------------------
*/
#include <linux/types.h>
#define VINT8 volatile u_int8_t
#define VINT32 volatile u_int32_t
#include "pmcc4_defs.h"
/*------------------------------------------------------------------------
// Vendor, Board Identification definitions
//------------------------------------------------------------------------
*/
#define PCI_VENDOR_ID_CONEXANT 0x14f1
#define PCI_DEVICE_ID_CN8471 0x8471
#define PCI_DEVICE_ID_CN8472 0x8472
#define PCI_DEVICE_ID_CN8474 0x8474
#define PCI_DEVICE_ID_CN8478 0x8478
#define PCI_DEVICE_ID_CN8500 0x8500
#define PCI_DEVICE_ID_CN8501 0x8501
#define PCI_DEVICE_ID_CN8502 0x8502
#define PCI_DEVICE_ID_CN8503 0x8503
#define INT_QUEUE_SIZE MUSYCC_NIQD
/* RAM image of MUSYCC registers laid out as a C structure */
struct musycc_groupr {
VINT32 thp[32]; /* Transmit Head Pointer [5-29] */
VINT32 tmp[32]; /* Transmit Message Pointer [5-30] */
VINT32 rhp[32]; /* Receive Head Pointer [5-29] */
VINT32 rmp[32]; /* Receive Message Pointer [5-30] */
VINT8 ttsm[128]; /* Time Slot Map [5-22] */
VINT8 tscm[256]; /* Subchannel Map [5-24] */
VINT32 tcct[32]; /* Channel Configuration [5-26] */
VINT8 rtsm[128]; /* Time Slot Map [5-22] */
VINT8 rscm[256]; /* Subchannel Map [5-24] */
VINT32 rcct[32]; /* Channel Configuration [5-26] */
VINT32 __glcd; /* Global Configuration Descriptor [5-10] */
VINT32 __iqp; /* Interrupt Queue Pointer [5-36] */
VINT32 __iql; /* Interrupt Queue Length [5-36] */
VINT32 grcd; /* Group Configuration Descriptor [5-16] */
VINT32 mpd; /* Memory Protection Descriptor [5-18] */
VINT32 mld; /* Message Length Descriptor [5-20] */
VINT32 pcd; /* Port Configuration Descriptor [5-19] */
};
/* hardware MUSYCC registers laid out as a C structure */
struct musycc_globalr {
VINT32 gbp; /* Group Base Pointer */
VINT32 dacbp; /* Dual Address Cycle Base Pointer */
VINT32 srd; /* Service Request Descriptor */
VINT32 isd; /* Interrupt Service Descriptor */
/*
* adjust __thp due to above 4 registers, which are not contained
* within musycc_groupr[]. All __XXX[] are just place holders,
* anyhow.
*/
VINT32 __thp[32 - 4]; /* Transmit Head Pointer [5-29] */
VINT32 __tmp[32]; /* Transmit Message Pointer [5-30] */
VINT32 __rhp[32]; /* Receive Head Pointer [5-29] */
VINT32 __rmp[32]; /* Receive Message Pointer [5-30] */
VINT8 ttsm[128]; /* Time Slot Map [5-22] */
VINT8 tscm[256]; /* Subchannel Map [5-24] */
VINT32 tcct[32]; /* Channel Configuration [5-26] */
VINT8 rtsm[128]; /* Time Slot Map [5-22] */
VINT8 rscm[256]; /* Subchannel Map [5-24] */
VINT32 rcct[32]; /* Channel Configuration [5-26] */
VINT32 glcd; /* Global Configuration Descriptor [5-10] */
VINT32 iqp; /* Interrupt Queue Pointer [5-36] */
VINT32 iql; /* Interrupt Queue Length [5-36] */
VINT32 grcd; /* Group Configuration Descriptor [5-16] */
VINT32 mpd; /* Memory Protection Descriptor [5-18] */
VINT32 mld; /* Message Length Descriptor [5-20] */
VINT32 pcd; /* Port Configuration Descriptor [5-19] */
VINT32 rbist; /* Receive BIST status [5-4] */
VINT32 tbist; /* Receive BIST status [5-4] */
};
/* Global Config Descriptor bit macros */
#define MUSYCC_GCD_ECLK_ENABLE 0x00000800 /* EBUS clock enable */
#define MUSYCC_GCD_INTEL_SELECT 0x00000400 /* MPU type select */
#define MUSYCC_GCD_INTA_DISABLE 0x00000008 /* PCI INTA disable */
#define MUSYCC_GCD_INTB_DISABLE 0x00000004 /* PCI INTB disable */
#define MUSYCC_GCD_BLAPSE 12 /* Position index for BLAPSE bit
* field */
#define MUSYCC_GCD_ALAPSE 8 /* Position index for ALAPSE bit
* field */
#define MUSYCC_GCD_ELAPSE 4 /* Position index for ELAPSE bit
* field */
#define MUSYCC_GCD_PORTMAP_3 3 /* Reserved */
#define MUSYCC_GCD_PORTMAP_2 2 /* Port 0=>Grp 0,1,2,3; Port 1=>Grp
* 4,5,6,7 */
#define MUSYCC_GCD_PORTMAP_1 1 /* Port 0=>Grp 0,1; Port 1=>Grp 2,3,
* etc... */
#define MUSYCC_GCD_PORTMAP_0 0 /* Port 0=>Grp 0; Port 1=>Grp 2,
* etc... */
/* and board specific assignments... */
#ifdef SBE_WAN256T3_ENABLE
#define BLAPSE_VAL 0
#define ALAPSE_VAL 0
#define ELAPSE_VAL 7
#define PORTMAP_VAL MUSYCC_GCD_PORTMAP_2
#endif
#ifdef SBE_PMCC4_ENABLE
#define BLAPSE_VAL 7
#define ALAPSE_VAL 3
#define ELAPSE_VAL 7
#define PORTMAP_VAL MUSYCC_GCD_PORTMAP_0
#endif
#define GCD_MAGIC (((BLAPSE_VAL)<<(MUSYCC_GCD_BLAPSE)) | \
((ALAPSE_VAL)<<(MUSYCC_GCD_ALAPSE)) | \
((ELAPSE_VAL)<<(MUSYCC_GCD_ELAPSE)) | \
(MUSYCC_GCD_ECLK_ENABLE) | PORTMAP_VAL)
/* Group Config Descriptor bit macros */
#define MUSYCC_GRCD_RX_ENABLE 0x00000001 /* Enable receive processing */
#define MUSYCC_GRCD_TX_ENABLE 0x00000002 /* Enable transmit processing */
#define MUSYCC_GRCD_SUBCHAN_DISABLE 0x00000004 /* Master disable for
* subchanneling */
#define MUSYCC_GRCD_OOFMP_DISABLE 0x00000008 /* Out of Frame message
* processing disabled all
* channels */
#define MUSYCC_GRCD_OOFIRQ_DISABLE 0x00000010 /* Out of Frame/In Frame irqs
* disabled */
#define MUSYCC_GRCD_COFAIRQ_DISABLE 0x00000020 /* Change of Frame Alignment
* irq disabled */
#define MUSYCC_GRCD_INHRBSD 0x00000100 /* Receive Buffer Status
* overwrite disabled */
#define MUSYCC_GRCD_INHTBSD 0x00000200 /* Transmit Buffer Status
* overwrite disabled */
#define MUSYCC_GRCD_SF_ALIGN 0x00008000 /* External frame sync */
#define MUSYCC_GRCD_MC_ENABLE 0x00000040 /* Message configuration bits
* copy enable. Conexant sez
* turn this on */
#define MUSYCC_GRCD_POLLTH_16 0x00000001 /* Poll every 16th frame */
#define MUSYCC_GRCD_POLLTH_32 0x00000002 /* Poll every 32nd frame */
#define MUSYCC_GRCD_POLLTH_64 0x00000003 /* Poll every 64th frame */
#define MUSYCC_GRCD_POLLTH_SHIFT 10 /* Position index for poll throttle
* bit field */
#define MUSYCC_GRCD_SUERM_THRESH_SHIFT 16 /* Position index for SUERM
* count threshold */
/* Port Config Descriptor bit macros */
#define MUSYCC_PCD_E1X2_MODE 2 /* Port mode in bits 0-2. T1 and E1 */
#define MUSYCC_PCD_E1X4_MODE 3 /* are defined in cn847x.h */
#define MUSYCC_PCD_NX64_MODE 4
#define MUSYCC_PCD_TXDATA_RISING 0x00000010 /* Sample Tx data on TCLK
* rising edge */
#define MUSYCC_PCD_TXSYNC_RISING 0x00000020 /* Sample Tx frame sync on
* TCLK rising edge */
#define MUSYCC_PCD_RXDATA_RISING 0x00000040 /* Sample Rx data on RCLK
* rising edge */
#define MUSYCC_PCD_RXSYNC_RISING 0x00000080 /* Sample Rx frame sync on
* RCLK rising edge */
#define MUSYCC_PCD_ROOF_RISING 0x00000100 /* Sample Rx Out Of Frame
* signal on RCLK rising edge */
#define MUSYCC_PCD_TX_DRIVEN 0x00000200 /* No mapped timeslots causes
* logic 1 on output, else
* tristate */
#define MUSYCC_PCD_PORTMODE_MASK 0xfffffff8 /* For changing the port mode
* between E1 and T1 */
/* Time Slot Descriptor bit macros */
#define MUSYCC_TSD_MODE_64KBPS 4
#define MUSYCC_TSD_MODE_56KBPS 5
#define MUSYCC_TSD_SUBCHANNEL_WO_FIRST 6
#define MUSYCC_TSD_SUBCHANNEL_WITH_FIRST 7
/* Message Descriptor bit macros */
#define MUSYCC_MDT_BASE03_ADDR 0x00006000
/* Channel Config Descriptor bit macros */
#define MUSYCC_CCD_BUFIRQ_DISABLE 0x00000002 /* BUFF and ONR irqs disabled */
#define MUSYCC_CCD_EOMIRQ_DISABLE 0x00000004 /* EOM irq disabled */
#define MUSYCC_CCD_MSGIRQ_DISABLE 0x00000008 /* LNG, FCS, ALIGN, and ABT
* irqs disabled */
#define MUSYCC_CCD_IDLEIRQ_DISABLE 0x00000010 /* CHABT, CHIC, and SHT irqs
* disabled */
#define MUSYCC_CCD_FILTIRQ_DISABLE 0x00000020 /* SFILT irq disabled */
#define MUSYCC_CCD_SDECIRQ_DISABLE 0x00000040 /* SDEC irq disabled */
#define MUSYCC_CCD_SINCIRQ_DISABLE 0x00000080 /* SINC irq disabled */
#define MUSYCC_CCD_SUERIRQ_DISABLE 0x00000100 /* SUERR irq disabled */
#define MUSYCC_CCD_FCS_XFER 0x00000200 /* Propagate FCS along with
* received data */
#define MUSYCC_CCD_PROTO_SHIFT 12 /* Position index for protocol bit
* field */
#define MUSYCC_CCD_TRANS 0 /* Protocol mode in bits 12-14 */
#define MUSYCC_CCD_SS7 1
#define MUSYCC_CCD_HDLC_FCS16 2
#define MUSYCC_CCD_HDLC_FCS32 3
#define MUSYCC_CCD_EOPIRQ_DISABLE 0x00008000 /* EOP irq disabled */
#define MUSYCC_CCD_INVERT_DATA 0x00800000 /* Invert data */
#define MUSYCC_CCD_MAX_LENGTH 10 /* Position index for max length bit
* field */
#define MUSYCC_CCD_BUFFER_LENGTH 16 /* Position index for internal data
* buffer length */
#define MUSYCC_CCD_BUFFER_LOC 24 /* Position index for internal data
* buffer starting location */
/****************************************************************************
* Interrupt Descriptor Information */
#define INT_EMPTY_ENTRY 0xfeedface
#define INT_EMPTY_ENTRY2 0xdeadface
/****************************************************************************
* Interrupt Status Descriptor
*
* NOTE: One must first fetch the value of the interrupt status descriptor
* into a local variable, then pass that value into the read macros. This
* is required to avoid race conditions.
***/
#define INTRPTS_NEXTINT_M 0x7FFF0000
#define INTRPTS_NEXTINT_S 16
#define INTRPTS_NEXTINT(x) ((x & INTRPTS_NEXTINT_M) >> INTRPTS_NEXTINT_S)
#define INTRPTS_INTFULL_M 0x00008000
#define INTRPTS_INTFULL_S 15
#define INTRPTS_INTFULL(x) ((x & INTRPTS_INTFULL_M) >> INTRPTS_INTFULL_S)
#define INTRPTS_INTCNT_M 0x00007FFF
#define INTRPTS_INTCNT_S 0
#define INTRPTS_INTCNT(x) ((x & INTRPTS_INTCNT_M) >> INTRPTS_INTCNT_S)
/****************************************************************************
* Interrupt Descriptor
***/
#define INTRPT_DIR_M 0x80000000
#define INTRPT_DIR_S 31
#define INTRPT_DIR(x) ((x & INTRPT_DIR_M) >> INTRPT_DIR_S)
#define INTRPT_GRP_M 0x60000000
#define INTRPT_GRP_MSB_M 0x00004000
#define INTRPT_GRP_S 29
#define INTRPT_GRP_MSB_S 12
#define INTRPT_GRP(x) (((x & INTRPT_GRP_M) >> INTRPT_GRP_S) | \
((x & INTRPT_GRP_MSB_M) >> INTRPT_GRP_MSB_S))
#define INTRPT_CH_M 0x1F000000
#define INTRPT_CH_S 24
#define INTRPT_CH(x) ((x & INTRPT_CH_M) >> INTRPT_CH_S)
#define INTRPT_EVENT_M 0x00F00000
#define INTRPT_EVENT_S 20
#define INTRPT_EVENT(x) ((x & INTRPT_EVENT_M) >> INTRPT_EVENT_S)
#define INTRPT_ERROR_M 0x000F0000
#define INTRPT_ERROR_S 16
#define INTRPT_ERROR(x) ((x & INTRPT_ERROR_M) >> INTRPT_ERROR_S)
#define INTRPT_ILOST_M 0x00008000
#define INTRPT_ILOST_S 15
#define INTRPT_ILOST(x) ((x & INTRPT_ILOST_M) >> INTRPT_ILOST_S)
#define INTRPT_PERR_M 0x00004000
#define INTRPT_PERR_S 14
#define INTRPT_PERR(x) ((x & INTRPT_PERR_M) >> INTRPT_PERR_S)
#define INTRPT_BLEN_M 0x00003FFF
#define INTRPT_BLEN_S 0
#define INTRPT_BLEN(x) ((x & INTRPT_BLEN_M) >> INTRPT_BLEN_S)
/* Buffer Descriptor bit macros */
#define OWNER_BIT 0x80000000 /* Set for MUSYCC owner on xmit, host
* owner on receive */
#define HOST_TX_OWNED 0x00000000 /* Host owns descriptor */
#define MUSYCC_TX_OWNED 0x80000000 /* MUSYCC owns descriptor */
#define HOST_RX_OWNED 0x80000000 /* Host owns descriptor */
#define MUSYCC_RX_OWNED 0x00000000 /* MUSYCC owns descriptor */
#define POLL_DISABLED 0x40000000 /* MUSYCC not allowed to poll buffer
* for ownership */
#define EOMIRQ_ENABLE 0x20000000 /* This buffer contains the end of
* the message */
#define EOBIRQ_ENABLE 0x10000000 /* EOB irq enabled */
#define PADFILL_ENABLE 0x01000000 /* Enable padfill */
#define REPEAT_BIT 0x00008000 /* Bit on for FISU descriptor */
#define LENGTH_MASK 0X3fff /* This part of status descriptor is
* length */
#define IDLE_CODE 25 /* Position index for idle code (2
* bits) */
#define EXTRA_FLAGS 16 /* Position index for minimum flags
* between messages (8 bits) */
#define IDLE_CODE_MASK 0x03 /* Gets rid of garbage before the
* pattern is OR'd in */
#define EXTRA_FLAGS_MASK 0xff /* Gets rid of garbage before the
* pattern is OR'd in */
#define PCI_PERMUTED_OWNER_BIT 0x00000080 /* For flipping the bit on
* the polled mode descriptor */
/* Service Request Descriptor bit macros */
#define SREQ 8 /* Position index for service request bit
* field */
#define SR_NOOP (0<<(SREQ)) /* No Operation. Generates SACK */
#define SR_CHIP_RESET (1<<(SREQ)) /* Soft chip reset */
#define SR_GROUP_RESET (2<<(SREQ)) /* Group reset */
#define SR_GLOBAL_INIT (4<<(SREQ)) /* Global init: read global
* config deswc and interrupt
* queue desc */
#define SR_GROUP_INIT (5<<(SREQ)) /* Group init: read Timeslot
* and Subchannel maps,
* Channel Config, */
/*
* Group Config, Memory Protect, Message Length, and Port Config
* Descriptors
*/
#define SR_CHANNEL_ACTIVATE (8<<(SREQ)) /* Init channel, read Head
* Pointer, process first
* Message Descriptor */
#define SR_GCHANNEL_MASK 0x001F /* channel portion (gchan) */
#define SR_CHANNEL_DEACTIVATE (9<<(SREQ)) /* Stop channel processing */
#define SR_JUMP (10<<(SREQ)) /* a: Process new Message
* List */
#define SR_CHANNEL_CONFIG (11<<(SREQ)) /* b: Read channel
* Configuration Descriptor */
#define SR_GLOBAL_CONFIG (16<<(SREQ)) /* 10: Read Global
* Configuration Descriptor */
#define SR_INTERRUPT_Q (17<<(SREQ)) /* 11: Read Interrupt Queue
* Descriptor */
#define SR_GROUP_CONFIG (18<<(SREQ)) /* 12: Read Group
* Configuration Descriptor */
#define SR_MEMORY_PROTECT (19<<(SREQ)) /* 13: Read Memory Protection
* Descriptor */
#define SR_MESSAGE_LENGTH (20<<(SREQ)) /* 14: Read Message Length
* Descriptor */
#define SR_PORT_CONFIG (21<<(SREQ)) /* 15: Read Port
* Configuration Descriptor */
#define SR_TIMESLOT_MAP (24<<(SREQ)) /* 18: Read Timeslot Map */
#define SR_SUBCHANNEL_MAP (25<<(SREQ)) /* 19: Read Subchannel Map */
#define SR_CHAN_CONFIG_TABLE (26<<(SREQ)) /* 20: Read Channel
* Configuration Table for
* the group */
#define SR_TX_DIRECTION 0x00000020 /* Transmit direction bit.
* Bit off indicates receive
* direction */
#define SR_RX_DIRECTION 0x00000000
/* Interrupt Descriptor bit macros */
#define GROUP10 29 /* Position index for the 2 LS group
* bits */
#define CHANNEL 24 /* Position index for channel bits */
#define INT_IQD_TX 0x80000000
#define INT_IQD_GRP 0x60000000
#define INT_IQD_CHAN 0x1f000000
#define INT_IQD_EVENT 0x00f00000
#define INT_IQD_ERROR 0x000f0000
#define INT_IQD_ILOST 0x00008000
#define INT_IQD_PERR 0x00004000
#define INT_IQD_BLEN 0x00003fff
/* Interrupt Descriptor Events */
#define EVE_EVENT 20 /* Position index for event bits */
#define EVE_NONE 0 /* No event to report in this
* interrupt */
#define EVE_SACK 1 /* Service Request acknowledge */
#define EVE_EOB 2 /* End of Buffer */
#define EVE_EOM 3 /* End of Message */
#define EVE_EOP 4 /* End of Padfill */
#define EVE_CHABT 5 /* Change to Abort Code */
#define EVE_CHIC 6 /* Change to Idle Code */
#define EVE_FREC 7 /* Frame Recovery */
#define EVE_SINC 8 /* MTP2 SUERM Increment */
#define EVE_SDEC 9 /* MTP2 SUERM Decrement */
#define EVE_SFILT 10 /* MTP2 SUERM Filtered Message */
/* Interrupt Descriptor Errors */
#define ERR_ERRORS 16 /* Position index for error bits */
#define ERR_BUF 1 /* Buffer Error */
#define ERR_COFA 2 /* Change of Frame Alignment Error */
#define ERR_ONR 3 /* Owner Bit Error */
#define ERR_PROT 4 /* Memory Protection Error */
#define ERR_OOF 8 /* Out of Frame Error */
#define ERR_FCS 9 /* FCS Error */
#define ERR_ALIGN 10 /* Octet Alignment Error */
#define ERR_ABT 11 /* Abort Termination */
#define ERR_LNG 12 /* Long Message Error */
#define ERR_SHT 13 /* Short Message Error */
#define ERR_SUERR 14 /* SUERM threshold exceeded */
#define ERR_PERR 15 /* PCI Parity Error */
/* Other Stuff */
#define TRANSMIT_DIRECTION 0x80000000 /* Transmit direction bit. Bit off
* indicates receive direction */
#define ILOST 0x00008000 /* Interrupt Lost */
#define GROUPMSB 0x00004000 /* Group number MSB */
#define SACK_IMAGE 0x00100000 /* Used in IRQ for semaphore test */
#define INITIAL_STATUS 0x10000 /* IRQ status should be this after
* reset */
/* This must be defined on an entire channel group (Port) basis */
#define SUERM_THRESHOLD 0x1f
#undef VINT32
#undef VINT8
#endif /*** _INC_MUSYCC_H_ ***/
/*** End-of-File ***/