/* * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> * Copyright 2008 Juergen Beisert, kernel@pengutronix.de * * Based on code from Freescale, * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, * MA 02110-1301, USA. */ #include <linux/err.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/irq.h> #include <linux/irqdomain.h> #include <linux/gpio.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/basic_mmio_gpio.h> #include <linux/module.h> #define MXS_SET 0x4 #define MXS_CLR 0x8 #define PINCTRL_DOUT(p) ((is_imx23_gpio(p) ? 0x0500 : 0x0700) + (p->id) * 0x10) #define PINCTRL_DIN(p) ((is_imx23_gpio(p) ? 0x0600 : 0x0900) + (p->id) * 0x10) #define PINCTRL_DOE(p) ((is_imx23_gpio(p) ? 0x0700 : 0x0b00) + (p->id) * 0x10) #define PINCTRL_PIN2IRQ(p) ((is_imx23_gpio(p) ? 0x0800 : 0x1000) + (p->id) * 0x10) #define PINCTRL_IRQEN(p) ((is_imx23_gpio(p) ? 0x0900 : 0x1100) + (p->id) * 0x10) #define PINCTRL_IRQLEV(p) ((is_imx23_gpio(p) ? 0x0a00 : 0x1200) + (p->id) * 0x10) #define PINCTRL_IRQPOL(p) ((is_imx23_gpio(p) ? 0x0b00 : 0x1300) + (p->id) * 0x10) #define PINCTRL_IRQSTAT(p) ((is_imx23_gpio(p) ? 0x0c00 : 0x1400) + (p->id) * 0x10) #define GPIO_INT_FALL_EDGE 0x0 #define GPIO_INT_LOW_LEV 0x1 #define GPIO_INT_RISE_EDGE 0x2 #define GPIO_INT_HIGH_LEV 0x3 #define GPIO_INT_LEV_MASK (1 << 0) #define GPIO_INT_POL_MASK (1 << 1) enum mxs_gpio_id { IMX23_GPIO, IMX28_GPIO, }; struct mxs_gpio_port { void __iomem *base; int id; int irq; struct irq_domain *domain; struct bgpio_chip bgc; enum mxs_gpio_id devid; u32 both_edges; }; static inline int is_imx23_gpio(struct mxs_gpio_port *port) { return port->devid == IMX23_GPIO; } static inline int is_imx28_gpio(struct mxs_gpio_port *port) { return port->devid == IMX28_GPIO; } /* Note: This driver assumes 32 GPIOs are handled in one register */ static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) { u32 val; u32 pin_mask = 1 << d->hwirq; struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mxs_gpio_port *port = gc->private; void __iomem *pin_addr; int edge; port->both_edges &= ~pin_mask; switch (type) { case IRQ_TYPE_EDGE_BOTH: val = gpio_get_value(port->bgc.gc.base + d->hwirq); if (val) edge = GPIO_INT_FALL_EDGE; else edge = GPIO_INT_RISE_EDGE; port->both_edges |= pin_mask; break; case IRQ_TYPE_EDGE_RISING: edge = GPIO_INT_RISE_EDGE; break; case IRQ_TYPE_EDGE_FALLING: edge = GPIO_INT_FALL_EDGE; break; case IRQ_TYPE_LEVEL_LOW: edge = GPIO_INT_LOW_LEV; break; case IRQ_TYPE_LEVEL_HIGH: edge = GPIO_INT_HIGH_LEV; break; default: return -EINVAL; } /* set level or edge */ pin_addr = port->base + PINCTRL_IRQLEV(port); if (edge & GPIO_INT_LEV_MASK) writel(pin_mask, pin_addr + MXS_SET); else writel(pin_mask, pin_addr + MXS_CLR); /* set polarity */ pin_addr = port->base + PINCTRL_IRQPOL(port); if (edge & GPIO_INT_POL_MASK) writel(pin_mask, pin_addr + MXS_SET); else writel(pin_mask, pin_addr + MXS_CLR); writel(pin_mask, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); return 0; } static void mxs_flip_edge(struct mxs_gpio_port *port, u32 gpio) { u32 bit, val, edge; void __iomem *pin_addr; bit = 1 << gpio; pin_addr = port->base + PINCTRL_IRQPOL(port); val = readl(pin_addr); edge = val & bit; if (edge) writel(bit, pin_addr + MXS_CLR); else writel(bit, pin_addr + MXS_SET); } /* MXS has one interrupt *per* gpio port */ static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) { u32 irq_stat; struct mxs_gpio_port *port = irq_get_handler_data(irq); desc->irq_data.chip->irq_ack(&desc->irq_data); irq_stat = readl(port->base + PINCTRL_IRQSTAT(port)) & readl(port->base + PINCTRL_IRQEN(port)); while (irq_stat != 0) { int irqoffset = fls(irq_stat) - 1; if (port->both_edges & (1 << irqoffset)) mxs_flip_edge(port, irqoffset); generic_handle_irq(irq_find_mapping(port->domain, irqoffset)); irq_stat &= ~(1 << irqoffset); } } /* * Set interrupt number "irq" in the GPIO as a wake-up source. * While system is running, all registered GPIO interrupts need to have * wake-up enabled. When system is suspended, only selected GPIO interrupts * need to have wake-up enabled. * @param irq interrupt source number * @param enable enable as wake-up if equal to non-zero * @return This function returns 0 on success. */ static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mxs_gpio_port *port = gc->private; if (enable) enable_irq_wake(port->irq); else disable_irq_wake(port->irq); return 0; } static void __init mxs_gpio_init_gc(struct mxs_gpio_port *port, int irq_base) { struct irq_chip_generic *gc; struct irq_chip_type *ct; gc = irq_alloc_generic_chip("gpio-mxs", 1, irq_base, port->base, handle_level_irq); gc->private = port; ct = gc->chip_types; ct->chip.irq_ack = irq_gc_ack_set_bit; ct->chip.irq_mask = irq_gc_mask_clr_bit; ct->chip.irq_unmask = irq_gc_mask_set_bit; ct->chip.irq_set_type = mxs_gpio_set_irq_type; ct->chip.irq_set_wake = mxs_gpio_set_wake_irq; ct->regs.ack = PINCTRL_IRQSTAT(port) + MXS_CLR; ct->regs.mask = PINCTRL_IRQEN(port); irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } static int mxs_gpio_to_irq(struct gpio_chip *gc, unsigned offset) { struct bgpio_chip *bgc = to_bgpio_chip(gc); struct mxs_gpio_port *port = container_of(bgc, struct mxs_gpio_port, bgc); return irq_find_mapping(port->domain, offset); } static struct platform_device_id mxs_gpio_ids[] = { { .name = "imx23-gpio", .driver_data = IMX23_GPIO, }, { .name = "imx28-gpio", .driver_data = IMX28_GPIO, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(platform, mxs_gpio_ids); static const struct of_device_id mxs_gpio_dt_ids[] = { { .compatible = "fsl,imx23-gpio", .data = (void *) IMX23_GPIO, }, { .compatible = "fsl,imx28-gpio", .data = (void *) IMX28_GPIO, }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, mxs_gpio_dt_ids); static int mxs_gpio_probe(struct platform_device *pdev) { const struct of_device_id *of_id = of_match_device(mxs_gpio_dt_ids, &pdev->dev); struct device_node *np = pdev->dev.of_node; struct device_node *parent; static void __iomem *base; struct mxs_gpio_port *port; int irq_base; int err; port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); if (!port) return -ENOMEM; port->id = of_alias_get_id(np, "gpio"); if (port->id < 0) return port->id; port->devid = (enum mxs_gpio_id) of_id->data; port->irq = platform_get_irq(pdev, 0); if (port->irq < 0) return port->irq; /* * map memory region only once, as all the gpio ports * share the same one */ if (!base) { parent = of_get_parent(np); base = of_iomap(parent, 0); of_node_put(parent); if (!base) return -EADDRNOTAVAIL; } port->base = base; /* * select the pin interrupt functionality but initially * disable the interrupts */ writel(~0U, port->base + PINCTRL_PIN2IRQ(port)); writel(0, port->base + PINCTRL_IRQEN(port)); /* clear address has to be used to clear IRQSTAT bits */ writel(~0U, port->base + PINCTRL_IRQSTAT(port) + MXS_CLR); irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id()); if (irq_base < 0) return irq_base; port->domain = irq_domain_add_legacy(np, 32, irq_base, 0, &irq_domain_simple_ops, NULL); if (!port->domain) { err = -ENODEV; goto out_irqdesc_free; } /* gpio-mxs can be a generic irq chip */ mxs_gpio_init_gc(port, irq_base); /* setup one handler for each entry */ irq_set_chained_handler(port->irq, mxs_gpio_irq_handler); irq_set_handler_data(port->irq, port); err = bgpio_init(&port->bgc, &pdev->dev, 4, port->base + PINCTRL_DIN(port), port->base + PINCTRL_DOUT(port) + MXS_SET, port->base + PINCTRL_DOUT(port) + MXS_CLR, port->base + PINCTRL_DOE(port), NULL, 0); if (err) goto out_irqdesc_free; port->bgc.gc.to_irq = mxs_gpio_to_irq; port->bgc.gc.base = port->id * 32; err = gpiochip_add(&port->bgc.gc); if (err) goto out_bgpio_remove; return 0; out_bgpio_remove: bgpio_remove(&port->bgc); out_irqdesc_free: irq_free_descs(irq_base, 32); return err; } static struct platform_driver mxs_gpio_driver = { .driver = { .name = "gpio-mxs", .owner = THIS_MODULE, .of_match_table = mxs_gpio_dt_ids, }, .probe = mxs_gpio_probe, .id_table = mxs_gpio_ids, }; static int __init mxs_gpio_init(void) { return platform_driver_register(&mxs_gpio_driver); } postcore_initcall(mxs_gpio_init); MODULE_AUTHOR("Freescale Semiconductor, " "Daniel Mack <danielncaiaq.de>, " "Juergen Beisert <kernel@pengutronix.de>"); MODULE_DESCRIPTION("Freescale MXS GPIO"); MODULE_LICENSE("GPL");