/************************************************************************** * Copyright (c) 2011, Intel Corporation. * All Rights Reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. * * This program is distributed in the hope it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * **************************************************************************/ #include <linux/backlight.h> #include <drm/drmP.h> #include <drm/drm.h> #include <drm/gma_drm.h> #include "psb_drv.h" #include "psb_reg.h" #include "psb_intel_reg.h" #include "intel_bios.h" #include "cdv_device.h" #define VGA_SR_INDEX 0x3c4 #define VGA_SR_DATA 0x3c5 static void cdv_disable_vga(struct drm_device *dev) { u8 sr1; u32 vga_reg; vga_reg = VGACNTRL; outb(1, VGA_SR_INDEX); sr1 = inb(VGA_SR_DATA); outb(sr1 | 1<<5, VGA_SR_DATA); udelay(300); REG_WRITE(vga_reg, VGA_DISP_DISABLE); REG_READ(vga_reg); } static int cdv_output_init(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; drm_mode_create_scaling_mode_property(dev); cdv_disable_vga(dev); cdv_intel_crt_init(dev, &dev_priv->mode_dev); cdv_intel_lvds_init(dev, &dev_priv->mode_dev); /* These bits indicate HDMI not SDVO on CDV */ if (REG_READ(SDVOB) & SDVO_DETECTED) { cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOB); if (REG_READ(DP_B) & DP_DETECTED) cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_B); } if (REG_READ(SDVOC) & SDVO_DETECTED) { cdv_hdmi_init(dev, &dev_priv->mode_dev, SDVOC); if (REG_READ(DP_C) & DP_DETECTED) cdv_intel_dp_init(dev, &dev_priv->mode_dev, DP_C); } return 0; } #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE /* * Cedartrail Backlght Interfaces */ static struct backlight_device *cdv_backlight_device; static int cdv_backlight_combination_mode(struct drm_device *dev) { return REG_READ(BLC_PWM_CTL2) & PWM_LEGACY_MODE; } static u32 cdv_get_max_backlight(struct drm_device *dev) { u32 max = REG_READ(BLC_PWM_CTL); if (max == 0) { DRM_DEBUG_KMS("LVDS Panel PWM value is 0!\n"); /* i915 does this, I believe which means that we should not * smash PWM control as firmware will take control of it. */ return 1; } max >>= 16; if (cdv_backlight_combination_mode(dev)) max *= 0xff; return max; } static int cdv_get_brightness(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); u32 val = REG_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; if (cdv_backlight_combination_mode(dev)) { u8 lbpc; val &= ~1; pci_read_config_byte(dev->pdev, 0xF4, &lbpc); val *= lbpc; } return (val * 100)/cdv_get_max_backlight(dev); } static int cdv_set_brightness(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); int level = bd->props.brightness; u32 blc_pwm_ctl; /* Percentage 1-100% being valid */ if (level < 1) level = 1; level *= cdv_get_max_backlight(dev); level /= 100; if (cdv_backlight_combination_mode(dev)) { u32 max = cdv_get_max_backlight(dev); u8 lbpc; lbpc = level * 0xfe / max + 1; level /= lbpc; pci_write_config_byte(dev->pdev, 0xF4, lbpc); } blc_pwm_ctl = REG_READ(BLC_PWM_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; REG_WRITE(BLC_PWM_CTL, (blc_pwm_ctl | (level << BACKLIGHT_DUTY_CYCLE_SHIFT))); return 0; } static const struct backlight_ops cdv_ops = { .get_brightness = cdv_get_brightness, .update_status = cdv_set_brightness, }; static int cdv_backlight_init(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; struct backlight_properties props; memset(&props, 0, sizeof(struct backlight_properties)); props.max_brightness = 100; props.type = BACKLIGHT_PLATFORM; cdv_backlight_device = backlight_device_register("psb-bl", NULL, (void *)dev, &cdv_ops, &props); if (IS_ERR(cdv_backlight_device)) return PTR_ERR(cdv_backlight_device); cdv_backlight_device->props.brightness = cdv_get_brightness(cdv_backlight_device); backlight_update_status(cdv_backlight_device); dev_priv->backlight_device = cdv_backlight_device; dev_priv->backlight_enabled = true; return 0; } #endif /* * Provide the Cedarview specific chip logic and low level methods * for power management * * FIXME: we need to implement the apm/ospm base management bits * for this and the MID devices. */ static inline u32 CDV_MSG_READ32(uint port, uint offset) { int mcr = (0x10<<24) | (port << 16) | (offset << 8); uint32_t ret_val = 0; struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); pci_write_config_dword(pci_root, 0xD0, mcr); pci_read_config_dword(pci_root, 0xD4, &ret_val); pci_dev_put(pci_root); return ret_val; } static inline void CDV_MSG_WRITE32(uint port, uint offset, u32 value) { int mcr = (0x11<<24) | (port << 16) | (offset << 8) | 0xF0; struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); pci_write_config_dword(pci_root, 0xD4, value); pci_write_config_dword(pci_root, 0xD0, mcr); pci_dev_put(pci_root); } #define PSB_PM_SSC 0x20 #define PSB_PM_SSS 0x30 #define PSB_PWRGT_GFX_ON 0x02 #define PSB_PWRGT_GFX_OFF 0x01 #define PSB_PWRGT_GFX_D0 0x00 #define PSB_PWRGT_GFX_D3 0x03 static void cdv_init_pm(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; u32 pwr_cnt; int i; dev_priv->apm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, PSB_APMBA) & 0xFFFF; dev_priv->ospm_base = CDV_MSG_READ32(PSB_PUNIT_PORT, PSB_OSPMBA) & 0xFFFF; /* Power status */ pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); /* Enable the GPU */ pwr_cnt &= ~PSB_PWRGT_GFX_MASK; pwr_cnt |= PSB_PWRGT_GFX_ON; outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); /* Wait for the GPU power */ for (i = 0; i < 5; i++) { u32 pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); if ((pwr_sts & PSB_PWRGT_GFX_MASK) == 0) return; udelay(10); } dev_err(dev->dev, "GPU: power management timed out.\n"); } static void cdv_errata(struct drm_device *dev) { /* Disable bonus launch. * CPU and GPU competes for memory and display misses updates and * flickers. Worst with dual core, dual displays. * * Fixes were done to Win 7 gfx driver to disable a feature called * Bonus Launch to work around the issue, by degrading * performance. */ CDV_MSG_WRITE32(3, 0x30, 0x08027108); } /** * cdv_save_display_registers - save registers lost on suspend * @dev: our DRM device * * Save the state we need in order to be able to restore the interface * upon resume from suspend */ static int cdv_save_display_registers(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; struct psb_save_area *regs = &dev_priv->regs; struct drm_connector *connector; dev_dbg(dev->dev, "Saving GPU registers.\n"); pci_read_config_byte(dev->pdev, 0xF4, ®s->cdv.saveLBB); regs->cdv.saveDSPCLK_GATE_D = REG_READ(DSPCLK_GATE_D); regs->cdv.saveRAMCLK_GATE_D = REG_READ(RAMCLK_GATE_D); regs->cdv.saveDSPARB = REG_READ(DSPARB); regs->cdv.saveDSPFW[0] = REG_READ(DSPFW1); regs->cdv.saveDSPFW[1] = REG_READ(DSPFW2); regs->cdv.saveDSPFW[2] = REG_READ(DSPFW3); regs->cdv.saveDSPFW[3] = REG_READ(DSPFW4); regs->cdv.saveDSPFW[4] = REG_READ(DSPFW5); regs->cdv.saveDSPFW[5] = REG_READ(DSPFW6); regs->cdv.saveADPA = REG_READ(ADPA); regs->cdv.savePP_CONTROL = REG_READ(PP_CONTROL); regs->cdv.savePFIT_PGM_RATIOS = REG_READ(PFIT_PGM_RATIOS); regs->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); regs->saveBLC_PWM_CTL2 = REG_READ(BLC_PWM_CTL2); regs->cdv.saveLVDS = REG_READ(LVDS); regs->cdv.savePFIT_CONTROL = REG_READ(PFIT_CONTROL); regs->cdv.savePP_ON_DELAYS = REG_READ(PP_ON_DELAYS); regs->cdv.savePP_OFF_DELAYS = REG_READ(PP_OFF_DELAYS); regs->cdv.savePP_CYCLE = REG_READ(PP_CYCLE); regs->cdv.saveVGACNTRL = REG_READ(VGACNTRL); regs->cdv.saveIER = REG_READ(PSB_INT_ENABLE_R); regs->cdv.saveIMR = REG_READ(PSB_INT_MASK_R); list_for_each_entry(connector, &dev->mode_config.connector_list, head) connector->funcs->dpms(connector, DRM_MODE_DPMS_OFF); return 0; } /** * cdv_restore_display_registers - restore lost register state * @dev: our DRM device * * Restore register state that was lost during suspend and resume. * * FIXME: review */ static int cdv_restore_display_registers(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; struct psb_save_area *regs = &dev_priv->regs; struct drm_connector *connector; u32 temp; pci_write_config_byte(dev->pdev, 0xF4, regs->cdv.saveLBB); REG_WRITE(DSPCLK_GATE_D, regs->cdv.saveDSPCLK_GATE_D); REG_WRITE(RAMCLK_GATE_D, regs->cdv.saveRAMCLK_GATE_D); /* BIOS does below anyway */ REG_WRITE(DPIO_CFG, 0); REG_WRITE(DPIO_CFG, DPIO_MODE_SELECT_0 | DPIO_CMN_RESET_N); temp = REG_READ(DPLL_A); if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) { REG_WRITE(DPLL_A, temp | DPLL_SYNCLOCK_ENABLE); REG_READ(DPLL_A); } temp = REG_READ(DPLL_B); if ((temp & DPLL_SYNCLOCK_ENABLE) == 0) { REG_WRITE(DPLL_B, temp | DPLL_SYNCLOCK_ENABLE); REG_READ(DPLL_B); } udelay(500); REG_WRITE(DSPFW1, regs->cdv.saveDSPFW[0]); REG_WRITE(DSPFW2, regs->cdv.saveDSPFW[1]); REG_WRITE(DSPFW3, regs->cdv.saveDSPFW[2]); REG_WRITE(DSPFW4, regs->cdv.saveDSPFW[3]); REG_WRITE(DSPFW5, regs->cdv.saveDSPFW[4]); REG_WRITE(DSPFW6, regs->cdv.saveDSPFW[5]); REG_WRITE(DSPARB, regs->cdv.saveDSPARB); REG_WRITE(ADPA, regs->cdv.saveADPA); REG_WRITE(BLC_PWM_CTL2, regs->saveBLC_PWM_CTL2); REG_WRITE(LVDS, regs->cdv.saveLVDS); REG_WRITE(PFIT_CONTROL, regs->cdv.savePFIT_CONTROL); REG_WRITE(PFIT_PGM_RATIOS, regs->cdv.savePFIT_PGM_RATIOS); REG_WRITE(BLC_PWM_CTL, regs->saveBLC_PWM_CTL); REG_WRITE(PP_ON_DELAYS, regs->cdv.savePP_ON_DELAYS); REG_WRITE(PP_OFF_DELAYS, regs->cdv.savePP_OFF_DELAYS); REG_WRITE(PP_CYCLE, regs->cdv.savePP_CYCLE); REG_WRITE(PP_CONTROL, regs->cdv.savePP_CONTROL); REG_WRITE(VGACNTRL, regs->cdv.saveVGACNTRL); REG_WRITE(PSB_INT_ENABLE_R, regs->cdv.saveIER); REG_WRITE(PSB_INT_MASK_R, regs->cdv.saveIMR); /* Fix arbitration bug */ cdv_errata(dev); drm_mode_config_reset(dev); list_for_each_entry(connector, &dev->mode_config.connector_list, head) connector->funcs->dpms(connector, DRM_MODE_DPMS_ON); /* Resume the modeset for every activated CRTC */ drm_helper_resume_force_mode(dev); return 0; } static int cdv_power_down(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; u32 pwr_cnt, pwr_mask, pwr_sts; int tries = 5; pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); pwr_cnt &= ~PSB_PWRGT_GFX_MASK; pwr_cnt |= PSB_PWRGT_GFX_OFF; pwr_mask = PSB_PWRGT_GFX_MASK; outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); while (tries--) { pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D3) return 0; udelay(10); } return 0; } static int cdv_power_up(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; u32 pwr_cnt, pwr_mask, pwr_sts; int tries = 5; pwr_cnt = inl(dev_priv->apm_base + PSB_APM_CMD); pwr_cnt &= ~PSB_PWRGT_GFX_MASK; pwr_cnt |= PSB_PWRGT_GFX_ON; pwr_mask = PSB_PWRGT_GFX_MASK; outl(pwr_cnt, dev_priv->apm_base + PSB_APM_CMD); while (tries--) { pwr_sts = inl(dev_priv->apm_base + PSB_APM_STS); if ((pwr_sts & pwr_mask) == PSB_PWRGT_GFX_D0) return 0; udelay(10); } return 0; } /* FIXME ? - shared with Poulsbo */ static void cdv_get_core_freq(struct drm_device *dev) { uint32_t clock; struct pci_dev *pci_root = pci_get_bus_and_slot(0, 0); struct drm_psb_private *dev_priv = dev->dev_private; pci_write_config_dword(pci_root, 0xD0, 0xD0050300); pci_read_config_dword(pci_root, 0xD4, &clock); pci_dev_put(pci_root); switch (clock & 0x07) { case 0: dev_priv->core_freq = 100; break; case 1: dev_priv->core_freq = 133; break; case 2: dev_priv->core_freq = 150; break; case 3: dev_priv->core_freq = 178; break; case 4: dev_priv->core_freq = 200; break; case 5: case 6: case 7: dev_priv->core_freq = 266; break; default: dev_priv->core_freq = 0; } } static void cdv_hotplug_work_func(struct work_struct *work) { struct drm_psb_private *dev_priv = container_of(work, struct drm_psb_private, hotplug_work); struct drm_device *dev = dev_priv->dev; /* Just fire off a uevent and let userspace tell us what to do */ drm_helper_hpd_irq_event(dev); } /* The core driver has received a hotplug IRQ. We are in IRQ context so extract the needed information and kick off queued processing */ static int cdv_hotplug_event(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; schedule_work(&dev_priv->hotplug_work); REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); return 1; } static void cdv_hotplug_enable(struct drm_device *dev, bool on) { if (on) { u32 hotplug = REG_READ(PORT_HOTPLUG_EN); hotplug |= HDMIB_HOTPLUG_INT_EN | HDMIC_HOTPLUG_INT_EN | HDMID_HOTPLUG_INT_EN | CRT_HOTPLUG_INT_EN; REG_WRITE(PORT_HOTPLUG_EN, hotplug); } else { REG_WRITE(PORT_HOTPLUG_EN, 0); REG_WRITE(PORT_HOTPLUG_STAT, REG_READ(PORT_HOTPLUG_STAT)); } } static const char *force_audio_names[] = { "off", "auto", "on", }; void cdv_intel_attach_force_audio_property(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_psb_private *dev_priv = dev->dev_private; struct drm_property *prop; int i; prop = dev_priv->force_audio_property; if (prop == NULL) { prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, "audio", ARRAY_SIZE(force_audio_names)); if (prop == NULL) return; for (i = 0; i < ARRAY_SIZE(force_audio_names); i++) drm_property_add_enum(prop, i, i-1, force_audio_names[i]); dev_priv->force_audio_property = prop; } drm_object_attach_property(&connector->base, prop, 0); } static const char *broadcast_rgb_names[] = { "Full", "Limited 16:235", }; void cdv_intel_attach_broadcast_rgb_property(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_psb_private *dev_priv = dev->dev_private; struct drm_property *prop; int i; prop = dev_priv->broadcast_rgb_property; if (prop == NULL) { prop = drm_property_create(dev, DRM_MODE_PROP_ENUM, "Broadcast RGB", ARRAY_SIZE(broadcast_rgb_names)); if (prop == NULL) return; for (i = 0; i < ARRAY_SIZE(broadcast_rgb_names); i++) drm_property_add_enum(prop, i, i, broadcast_rgb_names[i]); dev_priv->broadcast_rgb_property = prop; } drm_object_attach_property(&connector->base, prop, 0); } /* Cedarview */ static const struct psb_offset cdv_regmap[2] = { { .fp0 = FPA0, .fp1 = FPA1, .cntr = DSPACNTR, .conf = PIPEACONF, .src = PIPEASRC, .dpll = DPLL_A, .dpll_md = DPLL_A_MD, .htotal = HTOTAL_A, .hblank = HBLANK_A, .hsync = HSYNC_A, .vtotal = VTOTAL_A, .vblank = VBLANK_A, .vsync = VSYNC_A, .stride = DSPASTRIDE, .size = DSPASIZE, .pos = DSPAPOS, .base = DSPABASE, .surf = DSPASURF, .addr = DSPABASE, .status = PIPEASTAT, .linoff = DSPALINOFF, .tileoff = DSPATILEOFF, .palette = PALETTE_A, }, { .fp0 = FPB0, .fp1 = FPB1, .cntr = DSPBCNTR, .conf = PIPEBCONF, .src = PIPEBSRC, .dpll = DPLL_B, .dpll_md = DPLL_B_MD, .htotal = HTOTAL_B, .hblank = HBLANK_B, .hsync = HSYNC_B, .vtotal = VTOTAL_B, .vblank = VBLANK_B, .vsync = VSYNC_B, .stride = DSPBSTRIDE, .size = DSPBSIZE, .pos = DSPBPOS, .base = DSPBBASE, .surf = DSPBSURF, .addr = DSPBBASE, .status = PIPEBSTAT, .linoff = DSPBLINOFF, .tileoff = DSPBTILEOFF, .palette = PALETTE_B, } }; static int cdv_chip_setup(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; INIT_WORK(&dev_priv->hotplug_work, cdv_hotplug_work_func); if (pci_enable_msi(dev->pdev)) dev_warn(dev->dev, "Enabling MSI failed!\n"); dev_priv->regmap = cdv_regmap; cdv_get_core_freq(dev); psb_intel_opregion_init(dev); psb_intel_init_bios(dev); cdv_hotplug_enable(dev, false); return 0; } /* CDV is much like Poulsbo but has MID like SGX offsets and PM */ const struct psb_ops cdv_chip_ops = { .name = "GMA3600/3650", .accel_2d = 0, .pipes = 2, .crtcs = 2, .hdmi_mask = (1 << 0) | (1 << 1), .lvds_mask = (1 << 1), .sdvo_mask = (1 << 0), .cursor_needs_phys = 0, .sgx_offset = MRST_SGX_OFFSET, .chip_setup = cdv_chip_setup, .errata = cdv_errata, .crtc_helper = &cdv_intel_helper_funcs, .crtc_funcs = &cdv_intel_crtc_funcs, .clock_funcs = &cdv_clock_funcs, .output_init = cdv_output_init, .hotplug = cdv_hotplug_event, .hotplug_enable = cdv_hotplug_enable, #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE .backlight_init = cdv_backlight_init, #endif .init_pm = cdv_init_pm, .save_regs = cdv_save_display_registers, .restore_regs = cdv_restore_display_registers, .power_down = cdv_power_down, .power_up = cdv_power_up, .update_wm = cdv_update_wm, .disable_sr = cdv_disable_sr, };