menuconfig ISDN_DRV_GIGASET
	tristate "Siemens Gigaset support"
	depends on TTY
	select CRC_CCITT
	select BITREVERSE
	help
	  This driver supports the Siemens Gigaset SX205/255 family of
	  ISDN DECT bases, including the predecessors Gigaset 3070/3075
	  and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
	  721X.
	  If you have one of these devices, say M here and for at least
	  one of the connection specific parts that follow.
	  This will build a module called "gigaset".
	  Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
	  as a module, you have to build this driver as a module too,
	  otherwise the Gigaset device won't show up as an ISDN device.

if ISDN_DRV_GIGASET

config GIGASET_CAPI
	bool "Gigaset CAPI support"
	depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
	default ISDN_I4L='n'
	help
	  Build the Gigaset driver as a CAPI 2.0 driver interfacing with
	  the Kernel CAPI subsystem. To use it with the old ISDN4Linux
	  subsystem you'll have to enable the capidrv glue driver.
	  (select ISDN_CAPI_CAPIDRV.)
	  Say N to build the old native ISDN4Linux variant.
	  If unsure, say Y.

config GIGASET_I4L
	bool
	depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
	default !GIGASET_CAPI

config GIGASET_DUMMYLL
	bool
	default !GIGASET_CAPI&&!GIGASET_I4L

config GIGASET_BASE
	tristate "Gigaset base station support"
	depends on USB
	help
	  Say M here if you want to use the USB interface of the Gigaset
	  base for connection to your system.
	  This will build a module called "bas_gigaset".

config GIGASET_M105
	tristate "Gigaset M105 support"
	depends on USB
	help
	  Say M here if you want to connect to the Gigaset base via DECT
	  using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
	  This will build a module called "usb_gigaset".

config GIGASET_M101
	tristate "Gigaset M101 support"
	help
	  Say M here if you want to connect to the Gigaset base via DECT
	  using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
	  This will build a module called "ser_gigaset".

config GIGASET_DEBUG
	bool "Gigaset debugging"
	help
	  This enables debugging code in the Gigaset drivers.
	  If in doubt, say yes.

endif # ISDN_DRV_GIGASET