/* * Marvell EBU SoC Device Bus Controller * (memory controller for NOR/NAND/SRAM/FPGA devices) * * Copyright (C) 2013 Marvell * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/io.h> #include <linux/clk.h> #include <linux/mbus.h> #include <linux/of_platform.h> #include <linux/of_address.h> #include <linux/platform_device.h> /* Register definitions */ #define DEV_WIDTH_BIT 30 #define BADR_SKEW_BIT 28 #define RD_HOLD_BIT 23 #define ACC_NEXT_BIT 17 #define RD_SETUP_BIT 12 #define ACC_FIRST_BIT 6 #define SYNC_ENABLE_BIT 24 #define WR_HIGH_BIT 16 #define WR_LOW_BIT 8 #define READ_PARAM_OFFSET 0x0 #define WRITE_PARAM_OFFSET 0x4 struct devbus_read_params { u32 bus_width; u32 badr_skew; u32 turn_off; u32 acc_first; u32 acc_next; u32 rd_setup; u32 rd_hold; }; struct devbus_write_params { u32 sync_enable; u32 wr_high; u32 wr_low; u32 ale_wr; }; struct devbus { struct device *dev; void __iomem *base; unsigned long tick_ps; }; static int get_timing_param_ps(struct devbus *devbus, struct device_node *node, const char *name, u32 *ticks) { u32 time_ps; int err; err = of_property_read_u32(node, name, &time_ps); if (err < 0) { dev_err(devbus->dev, "%s has no '%s' property\n", name, node->full_name); return err; } *ticks = (time_ps + devbus->tick_ps - 1) / devbus->tick_ps; dev_dbg(devbus->dev, "%s: %u ps -> 0x%x\n", name, time_ps, *ticks); return 0; } static int devbus_set_timing_params(struct devbus *devbus, struct device_node *node) { struct devbus_read_params r; struct devbus_write_params w; u32 value; int err; dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n", devbus->tick_ps); /* Get read timings */ err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width); if (err < 0) { dev_err(devbus->dev, "%s has no 'devbus,bus-width' property\n", node->full_name); return err; } /* Convert bit width to byte width */ r.bus_width /= 8; err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps", &r.badr_skew); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps", &r.turn_off); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps", &r.acc_first); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps", &r.acc_next); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps", &r.rd_setup); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps", &r.rd_hold); if (err < 0) return err; /* Get write timings */ err = of_property_read_u32(node, "devbus,sync-enable", &w.sync_enable); if (err < 0) { dev_err(devbus->dev, "%s has no 'devbus,sync-enable' property\n", node->full_name); return err; } err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps", &w.ale_wr); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps", &w.wr_low); if (err < 0) return err; err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps", &w.wr_high); if (err < 0) return err; /* Set read timings */ value = r.bus_width << DEV_WIDTH_BIT | r.badr_skew << BADR_SKEW_BIT | r.rd_hold << RD_HOLD_BIT | r.acc_next << ACC_NEXT_BIT | r.rd_setup << RD_SETUP_BIT | r.acc_first << ACC_FIRST_BIT | r.turn_off; dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n", devbus->base + READ_PARAM_OFFSET, value); writel(value, devbus->base + READ_PARAM_OFFSET); /* Set write timings */ value = w.sync_enable << SYNC_ENABLE_BIT | w.wr_low << WR_LOW_BIT | w.wr_high << WR_HIGH_BIT | w.ale_wr; dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n", devbus->base + WRITE_PARAM_OFFSET, value); writel(value, devbus->base + WRITE_PARAM_OFFSET); return 0; } static int mvebu_devbus_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct device_node *node = pdev->dev.of_node; struct devbus *devbus; struct resource *res; struct clk *clk; unsigned long rate; int err; devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL); if (!devbus) return -ENOMEM; devbus->dev = dev; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); devbus->base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(devbus->base)) return PTR_ERR(devbus->base); clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) return PTR_ERR(clk); clk_prepare_enable(clk); /* * Obtain clock period in picoseconds, * we need this in order to convert timing * parameters from cycles to picoseconds. */ rate = clk_get_rate(clk) / 1000; devbus->tick_ps = 1000000000 / rate; /* Read the device tree node and set the new timing parameters */ err = devbus_set_timing_params(devbus, node); if (err < 0) return err; /* * We need to create a child device explicitly from here to * guarantee that the child will be probed after the timing * parameters for the bus are written. */ err = of_platform_populate(node, NULL, NULL, dev); if (err < 0) return err; return 0; } static const struct of_device_id mvebu_devbus_of_match[] = { { .compatible = "marvell,mvebu-devbus" }, {}, }; MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match); static struct platform_driver mvebu_devbus_driver = { .probe = mvebu_devbus_probe, .driver = { .name = "mvebu-devbus", .owner = THIS_MODULE, .of_match_table = mvebu_devbus_of_match, }, }; static int __init mvebu_devbus_init(void) { return platform_driver_register(&mvebu_devbus_driver); } module_init(mvebu_devbus_init); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>"); MODULE_DESCRIPTION("Marvell EBU SoC Device Bus controller");