#
# Serial device configuration
#
if TTY
menu "Serial drivers"
depends on HAS_IOMEM
source "drivers/tty/serial/8250/Kconfig"
comment "Non-8250 serial port support"
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
an Integrator/AP or Integrator/PP2 platform, or if you have a
Cirrus Logic EP93xx CPU, say Y or M here.
If unsure, say N.
config SERIAL_AMBA_PL010_CONSOLE
bool "Support for console on AMBA serial port"
depends on SERIAL_AMBA_PL010=y
select SERIAL_CORE_CONSOLE
---help---
Say Y here if you wish to use an AMBA PrimeCell UART as the system
console (the system console is the device which receives all kernel
messages and warnings and which allows logins in single user mode).
Even if you say Y here, the currently visible framebuffer console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyAM0". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_AMBA_PL011
tristate "ARM AMBA PL011 serial port support"
depends on ARM_AMBA
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
here.
If unsure, say N.
config SERIAL_AMBA_PL011_CONSOLE
bool "Support for console on AMBA serial port"
depends on SERIAL_AMBA_PL011=y
select SERIAL_CORE_CONSOLE
---help---
Say Y here if you wish to use an AMBA PrimeCell UART as the system
console (the system console is the device which receives all kernel
messages and warnings and which allows logins in single user mode).
Even if you say Y here, the currently visible framebuffer console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyAMA0". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_SB1250_DUART
tristate "BCM1xxx on-chip DUART serial support"
depends on SIBYTE_SB1xxx_SOC=y
select SERIAL_CORE
default y
---help---
Support for the asynchronous serial interface (DUART) included in
the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
the letter D in DUART stands for "dual", which is how the device
is implemented. Depending on the SOC configuration there may be
one or more DUARTs available of which all are handled.
If unsure, say Y. To compile this driver as a module, choose M here:
the module will be called sb1250-duart.
config SERIAL_SB1250_DUART_CONSOLE
bool "Support for console on a BCM1xxx DUART serial port"
depends on SERIAL_SB1250_DUART=y
select SERIAL_CORE_CONSOLE
default y
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
mode).
If unsure, say Y.
config SERIAL_ATMEL
bool "AT91 / AT32 on-chip serial port support"
depends on ARCH_AT91 || AVR32
select SERIAL_CORE
help
This enables the driver for the on-chip UARTs of the Atmel
AT91 and AT32 processors.
config SERIAL_ATMEL_CONSOLE
bool "Support for console on AT91 / AT32 serial port"
depends on SERIAL_ATMEL=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you wish to use an on-chip UART on a Atmel
AT91 or AT32 processor as the system console (the system
console is the device which receives all kernel messages and
warnings and which allows logins in single user mode).
config SERIAL_ATMEL_PDC
bool "Support DMA transfers on AT91 / AT32 serial port"
depends on SERIAL_ATMEL
default y
help
Say Y here if you wish to use the PDC to do DMA transfers to
and from the Atmel AT91 / AT32 serial port. In order to
actually use DMA transfers, make sure that the use_dma_tx
and use_dma_rx members in the atmel_uart_data struct is set
appropriately for each port.
Note that break and error handling currently doesn't work
properly when DMA is enabled. Make sure that ports where
this matters don't use DMA.
config SERIAL_ATMEL_TTYAT
bool "Install as device ttyATn instead of ttySn"
depends on SERIAL_ATMEL=y
help
Say Y here if you wish to have the internal AT91 / AT32 UARTs
appear as /dev/ttyATn (major 204, minor starting at 154)
instead of the normal /dev/ttySn (major 4, minor starting at
64). This is necessary if you also want other UARTs, such as
external 8250/16C550 compatible UARTs.
The ttySn nodes are legally reserved for the 8250 serial driver
but are often misused by other serial drivers.
To use this, you should create suitable ttyATn device nodes in
/dev/, and pass "console=ttyATn" to the kernel.
Say Y if you have an external 8250/16C550 UART. If unsure, say N.
config SERIAL_KGDB_NMI
bool "Serial console over KGDB NMI debugger port"
depends on KGDB_SERIAL_CONSOLE
help
This special driver allows you to temporary use NMI debugger port
as a normal console (assuming that the port is attached to KGDB).
Unlike KDB's disable_nmi command, with this driver you are always
able to go back to the debugger using KGDB escape sequence ($3#33).
This is because this console driver processes the input in NMI
context, and thus is able to intercept the magic sequence.
Note that since the console interprets input and uses polling
communication methods, for things like PPP you still must fully
detach debugger port from the KGDB NMI (i.e. disable_nmi), and
use raw console.
If unsure, say N.
config SERIAL_KS8695
bool "Micrel KS8695 (Centaur) serial port support"
depends on ARCH_KS8695
select SERIAL_CORE
help
This selects the Micrel Centaur KS8695 UART. Say Y here.
config SERIAL_KS8695_CONSOLE
bool "Support for console on KS8695 (Centaur) serial port"
depends on SERIAL_KS8695=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you wish to use a KS8695 (Centaur) UART as the
system console (the system console is the device which
receives all kernel messages and warnings and which allows
logins in single user mode).
config SERIAL_CLPS711X
tristate "CLPS711X serial port support"
depends on ARCH_CLPS711X || COMPILE_TEST
select SERIAL_CORE
help
This enables the driver for the on-chip UARTs of the Cirrus
Logic EP711x/EP721x/EP731x processors.
config SERIAL_CLPS711X_CONSOLE
bool "Support for console on CLPS711X serial port"
depends on SERIAL_CLPS711X=y
select SERIAL_CORE_CONSOLE
help
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyCL1".
config SERIAL_SAMSUNG
tristate "Samsung SoC serial support"
depends on PLAT_SAMSUNG
select SERIAL_CORE
help
Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
provide all of these ports, depending on how the serial port
pins are configured.
config SERIAL_SAMSUNG_UARTS_4
bool
depends on PLAT_SAMSUNG
default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
depends on PLAT_SAMSUNG
default 6 if CPU_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
Select the number of available UART ports for the Samsung S3C
serial driver
config SERIAL_SAMSUNG_DEBUG
bool "Samsung SoC serial debug"
depends on SERIAL_SAMSUNG && DEBUG_LL
help
Add support for debugging the serial driver. Since this is
generally being used as a console, we use our own output
routines that go via the low-level debug printascii()
function.
config SERIAL_SAMSUNG_CONSOLE
bool "Support for console on Samsung SoC serial port"
depends on SERIAL_SAMSUNG=y
select SERIAL_CORE_CONSOLE
help
Allow selection of the S3C24XX on-board serial ports for use as
an virtual console.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttySACx". (Try "man bootparam" or see the documentation of
your boot loader about how to pass options to the kernel at
boot time.)
config SERIAL_SIRFSOC
tristate "SiRF SoC Platform Serial port support"
depends on ARCH_SIRF
select SERIAL_CORE
help
Support for the on-chip UART on the CSR SiRFprimaII series,
providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
provide all of these ports, depending on how the serial port
pins are configured).
config SERIAL_SIRFSOC_CONSOLE
bool "Support for console on SiRF SoC serial port"
depends on SERIAL_SIRFSOC=y
select SERIAL_CORE_CONSOLE
help
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttySiRFx". (Try "man bootparam" or see the documentation of
your boot loader about how to pass options to the kernel at
boot time.)
config SERIAL_TEGRA
tristate "NVIDIA Tegra20/30 SoC serial controller"
depends on ARCH_TEGRA && TEGRA20_APB_DMA
select SERIAL_CORE
help
Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not
provide all of these ports, depending on how the serial port
are enabled). This driver uses the APB DMA to achieve higher baudrate
and better performance.
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
select SERIAL_CORE
help
MAX3100 chip support
config SERIAL_MAX310X
bool "MAX310X support"
depends on SPI_MASTER
select SERIAL_CORE
select REGMAP_SPI if SPI_MASTER
default n
help
This selects support for an advanced UART from Maxim (Dallas).
Supported ICs are MAX3107, MAX3108, MAX3109, MAX14830.
Each IC contains 128 words each of receive and transmit FIFO
that can be controlled through I2C or high-speed SPI.
Say Y here if you want to support this ICs.
config SERIAL_DZ
bool "DECstation DZ serial driver"
depends on MACH_DECSTATION && 32BIT
select SERIAL_CORE
default y
---help---
DZ11-family serial controllers for DECstations and VAXstations,
including the DC7085, M7814, and M7819.
config SERIAL_DZ_CONSOLE
bool "Support console on DECstation DZ serial driver"
depends on SERIAL_DZ=y
select SERIAL_CORE_CONSOLE
default y
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
mode).
Note that the firmware uses ttyS3 as the serial console on
DECstations that use this driver.
If unsure, say Y.
config SERIAL_ZS
tristate "DECstation Z85C30 serial support"
depends on MACH_DECSTATION
select SERIAL_CORE
default y
---help---
Support for the Zilog 85C350 serial communications controller used
for serial ports in newer DECstation systems. These include the
DECsystem 5900 and all models of the DECstation and DECsystem 5000
systems except from model 200.
If unsure, say Y. To compile this driver as a module, choose M here:
the module will be called zs.
config SERIAL_ZS_CONSOLE
bool "Support for console on a DECstation Z85C30 serial port"
depends on SERIAL_ZS=y
select SERIAL_CORE_CONSOLE
default y
---help---
If you say Y here, it will be possible to use a serial port as the
system console (the system console is the device which receives all
kernel messages and warnings and which allows logins in single user
mode).
Note that the firmware uses ttyS1 as the serial console on the
Maxine and ttyS3 on the others using this driver.
If unsure, say Y.
config SERIAL_21285
tristate "DC21285 serial port support"
depends on FOOTBRIDGE
select SERIAL_CORE
help
If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
PCI bridge you can enable its onboard serial port by enabling this
option.
config SERIAL_21285_CONSOLE
bool "Console on DC21285 serial port"
depends on SERIAL_21285=y
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the 21285 footbridge you can
make it the console by answering Y to this option.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyFB". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_MPSC
bool "Marvell MPSC serial port support"
depends on MV64X60
select SERIAL_CORE
help
Say Y here if you want to use the Marvell MPSC serial controller.
config SERIAL_MPSC_CONSOLE
bool "Support for console on Marvell MPSC serial port"
depends on SERIAL_MPSC
select SERIAL_CORE_CONSOLE
help
Say Y here if you want to support a serial console on a Marvell MPSC.
config SERIAL_PXA
bool "PXA serial port support"
depends on ARCH_PXA || ARCH_MMP
select SERIAL_CORE
help
If you have a machine based on an Intel XScale PXA2xx CPU you
can enable its onboard serial ports by enabling this option.
config SERIAL_PXA_CONSOLE
bool "Console on PXA serial port"
depends on SERIAL_PXA
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the Intel XScale PXA
CPU you can make it the console by answering Y to this option.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttySA0". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_SA1100
bool "SA1100 serial port support"
depends on ARCH_SA1100
select SERIAL_CORE
help
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
can enable its onboard serial port by enabling this option.
Please read <file:Documentation/arm/SA1100/serial_UART> for further
info.
config SERIAL_SA1100_CONSOLE
bool "Console on SA1100 serial port"
depends on SERIAL_SA1100
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the SA1100/SA1110 StrongARM
CPU you can make it the console by answering Y to this option.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttySA0". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_MRST_MAX3110
tristate "SPI UART driver for Max3110"
depends on SPI_DW_PCI
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
help
This is the UART protocol driver for the MAX3110 device on
the Intel Moorestown platform. On other systems use the max3100
driver.
config SERIAL_MFD_HSU
tristate "Medfield High Speed UART support"
depends on PCI
select SERIAL_CORE
config SERIAL_MFD_HSU_CONSOLE
boolean "Medfile HSU serial console support"
depends on SERIAL_MFD_HSU=y
select SERIAL_CORE_CONSOLE
config SERIAL_BFIN
tristate "Blackfin serial port support"
depends on BLACKFIN
select SERIAL_CORE
select SERIAL_BFIN_UART0 if (BF531 || BF532 || BF533 || BF561)
help
Add support for the built-in UARTs on the Blackfin.
To compile this driver as a module, choose M here: the
module is named bfin_uart.ko.
config SERIAL_BFIN_CONSOLE
bool "Console on Blackfin serial port"
depends on SERIAL_BFIN=y
select SERIAL_CORE_CONSOLE
choice
prompt "UART Mode"
depends on SERIAL_BFIN
default SERIAL_BFIN_DMA
help
This driver supports the built-in serial ports of the Blackfin family
of CPUs
config SERIAL_BFIN_DMA
bool "DMA mode"
depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
help
This driver works under DMA mode. If this option is selected, the
blackfin simple dma driver is also enabled.
config SERIAL_BFIN_PIO
bool "PIO mode"
help
This driver works under PIO mode.
endchoice
config SERIAL_BFIN_UART0
bool "Enable UART0"
depends on SERIAL_BFIN
help
Enable UART0
config BFIN_UART0_CTSRTS
bool "Enable UART0 hardware flow control"
depends on SERIAL_BFIN_UART0
help
Enable hardware flow control in the driver.
config SERIAL_BFIN_UART1
bool "Enable UART1"
depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
help
Enable UART1
config BFIN_UART1_CTSRTS
bool "Enable UART1 hardware flow control"
depends on SERIAL_BFIN_UART1
help
Enable hardware flow control in the driver.
config SERIAL_BFIN_UART2
bool "Enable UART2"
depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
help
Enable UART2
config BFIN_UART2_CTSRTS
bool "Enable UART2 hardware flow control"
depends on SERIAL_BFIN_UART2
help
Enable hardware flow control in the driver.
config SERIAL_BFIN_UART3
bool "Enable UART3"
depends on SERIAL_BFIN && (BF54x)
help
Enable UART3
config BFIN_UART3_CTSRTS
bool "Enable UART3 hardware flow control"
depends on SERIAL_BFIN_UART3
help
Enable hardware flow control in the driver.
config SERIAL_IMX
tristate "IMX serial port support"
depends on ARCH_MXC
select SERIAL_CORE
select RATIONAL
help
If you have a machine based on a Motorola IMX CPU you
can enable its onboard serial port by enabling this option.
config SERIAL_IMX_CONSOLE
bool "Console on IMX serial port"
depends on SERIAL_IMX=y
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the Freescale IMX
CPU you can make it the console by answering Y to this option.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttymxc0". (Try "man bootparam" or see the documentation of
your bootloader about how to pass options to the kernel at boot time.)
config SERIAL_UARTLITE
tristate "Xilinx uartlite serial port support"
depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE || ARCH_ZYNQ
select SERIAL_CORE
help
Say Y here if you want to use the Xilinx uartlite serial controller.
To compile this driver as a module, choose M here: the
module will be called uartlite.
config SERIAL_UARTLITE_CONSOLE
bool "Support for console on Xilinx uartlite serial port"
depends on SERIAL_UARTLITE=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you wish to use a Xilinx uartlite as the system
console (the system console is the device which receives all kernel
messages and warnings and which allows logins in single user mode).
config SERIAL_SUNCORE
bool
depends on SPARC
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
default y
config SERIAL_SUNZILOG
tristate "Sun Zilog8530 serial support"
depends on SPARC
help
This driver supports the Zilog8530 serial ports found on many Sparc
systems. Say Y or M if you want to be able to these serial ports.
config SERIAL_SUNZILOG_CONSOLE
bool "Console on Sun Zilog8530 serial port"
depends on SERIAL_SUNZILOG=y
help
If you would like to be able to use the Zilog8530 serial port
on your Sparc system as the console, you can do so by answering
Y to this option.
config SERIAL_SUNSU
tristate "Sun SU serial support"
depends on SPARC && PCI
help
This driver supports the 8250 serial ports that run the keyboard and
mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
to these serial ports.
config SERIAL_SUNSU_CONSOLE
bool "Console on Sun SU serial port"
depends on SERIAL_SUNSU=y
help
If you would like to be able to use the SU serial port
on your Sparc system as the console, you can do so by answering
Y to this option.
config SERIAL_MUX
tristate "Serial MUX support"
depends on GSC
select SERIAL_CORE
default y
---help---
Saying Y here will enable the hardware MUX serial driver for
the Nova, K class systems and D class with a 'remote control card'.
The hardware MUX is not 8250/16550 compatible therefore the
/dev/ttyB0 device is shared between the Serial MUX and the PDC
software console. The following steps need to be completed to use
the Serial MUX:
1. create the device entry (mknod /dev/ttyB0 c 11 0)
2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
3. Add device ttyB0 to /etc/securetty (if you want to log on as
root on this console.)
4. Change the kernel command console parameter to: console=ttyB0
config SERIAL_MUX_CONSOLE
bool "Support for console on serial MUX"
depends on SERIAL_MUX=y
select SERIAL_CORE_CONSOLE
default y
config PDC_CONSOLE
bool "PDC software console support"
depends on PARISC && !SERIAL_MUX && VT
default n
help
Saying Y here will enable the software based PDC console to be
used as the system console. This is useful for machines in
which the hardware based console has not been written yet. The
following steps must be competed to use the PDC console:
1. create the device entry (mknod /dev/ttyB0 c 11 0)
2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
3. Add device ttyB0 to /etc/securetty (if you want to log on as
root on this console.)
4. Change the kernel command console parameter to: console=ttyB0
config SERIAL_SUNSAB
tristate "Sun Siemens SAB82532 serial support"
depends on SPARC && PCI
help
This driver supports the Siemens SAB82532 DUSCC serial ports on newer
(PCI) UltraSPARC systems. Say Y or M if you want to be able to these
serial ports.
config SERIAL_SUNSAB_CONSOLE
bool "Console on Sun Siemens SAB82532 serial port"
depends on SERIAL_SUNSAB=y
help
If you would like to be able to use the SAB82532 serial port
on your Sparc system as the console, you can do so by answering
Y to this option.
config SERIAL_SUNHV
bool "Sun4v Hypervisor Console support"
depends on SPARC64
help
This driver supports the console device found on SUN4V Sparc
systems. Say Y if you want to be able to use this device.
config SERIAL_IP22_ZILOG
tristate "SGI Zilog8530 serial support"
depends on SGI_HAS_ZILOG
select SERIAL_CORE
help
This driver supports the Zilog8530 serial ports found on SGI
systems. Say Y or M if you want to be able to these serial ports.
config SERIAL_IP22_ZILOG_CONSOLE
bool "Console on SGI Zilog8530 serial port"
depends on SERIAL_IP22_ZILOG=y
select SERIAL_CORE_CONSOLE
config SERIAL_SH_SCI
tristate "SuperH SCI(F) serial port support"
depends on HAVE_CLK && (SUPERH || ARM || COMPILE_TEST)
select SERIAL_CORE
config SERIAL_SH_SCI_NR_UARTS
int "Maximum number of SCI(F) serial ports"
depends on SERIAL_SH_SCI
default "2"
config SERIAL_SH_SCI_CONSOLE
bool "Support for console on SuperH SCI(F)"
depends on SERIAL_SH_SCI=y
select SERIAL_CORE_CONSOLE
config SERIAL_SH_SCI_DMA
bool "DMA support"
depends on SERIAL_SH_SCI && SH_DMAE
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
depends on SOC_PNX833X
select SERIAL_CORE
help
If you have a MIPS-based Philips SoC such as PNX8330 and you want
to use serial ports, say Y. Otherwise, say N.
config SERIAL_PNX8XXX_CONSOLE
bool "Enable PNX8XX0 serial console"
depends on SERIAL_PNX8XXX
select SERIAL_CORE_CONSOLE
help
If you have a MIPS-based Philips SoC such as PNX8330 and you want
to use serial console, say Y. Otherwise, say N.
config SERIAL_HS_LPC32XX
tristate "LPC32XX high speed serial port support"
depends on ARCH_LPC32XX && OF
select SERIAL_CORE
help
Support for the LPC32XX high speed serial ports (up to 900kbps).
Those are UARTs completely different from the Standard UARTs on the
LPC32XX SoC.
Choose M or Y here to build this driver.
config SERIAL_HS_LPC32XX_CONSOLE
bool "Enable LPC32XX high speed UART serial console"
depends on SERIAL_HS_LPC32XX
select SERIAL_CORE_CONSOLE
help
If you would like to be able to use one of the high speed serial
ports on the LPC32XX as the console, you can do so by answering
Y to this option.
config SERIAL_CORE
tristate
config SERIAL_CORE_CONSOLE
bool
config CONSOLE_POLL
bool
config SERIAL_68328
bool "68328 serial support"
depends on M68328 || M68EZ328 || M68VZ328
help
This driver supports the built-in serial port of the Motorola 68328
(standard, EZ and VZ varieties).
config SERIAL_68328_RTS_CTS
bool "Support RTS/CTS on 68328 serial port"
depends on SERIAL_68328
config SERIAL_MCF
bool "Coldfire serial support"
depends on COLDFIRE
select SERIAL_CORE
help
This serial driver supports the Freescale Coldfire serial ports.
config SERIAL_MCF_BAUDRATE
int "Default baudrate for Coldfire serial ports"
depends on SERIAL_MCF
default 19200
help
This setting lets you define what the default baudrate is for the
ColdFire serial ports. The usual default varies from board to board,
and this setting is a way of catering for that.
config SERIAL_MCF_CONSOLE
bool "Coldfire serial console support"
depends on SERIAL_MCF
select SERIAL_CORE_CONSOLE
help
Enable a ColdFire internal serial port to be the system console.
config SERIAL_PMACZILOG
tristate "Mac or PowerMac z85c30 ESCC support"
depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
select SERIAL_CORE
help
This driver supports the Zilog z85C30 serial ports found on
(Power)Mac machines.
Say Y or M if you want to be able to these serial ports.
config SERIAL_PMACZILOG_TTYS
bool "Use ttySn device nodes for Zilog z85c30"
depends on SERIAL_PMACZILOG
help
The pmac_zilog driver for the z85C30 chip on many powermacs
historically used the device numbers for /dev/ttySn. The
8250 serial port driver also uses these numbers, which means
the two drivers being unable to coexist; you could not use
both z85C30 and 8250 type ports at the same time.
If this option is not selected, the pmac_zilog driver will
use the device numbers allocated for /dev/ttyPZn. This allows
the pmac_zilog and 8250 drivers to co-exist, but may cause
existing userspace setups to break. Programs that need to
access the built-in serial ports on powermacs will need to
be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
If you enable this option, any z85c30 ports in the system will
be registered as ttyS0 onwards as in the past, and you will be
unable to use the 8250 module for PCMCIA or other 16C550-style
UARTs.
Say N unless you need the z85c30 ports on your (Power)Mac
to appear as /dev/ttySn.
config SERIAL_PMACZILOG_CONSOLE
bool "Console on Mac or PowerMac z85c30 serial port"
depends on SERIAL_PMACZILOG=y
select SERIAL_CORE_CONSOLE
help
If you would like to be able to use the z85c30 serial port
on your (Power)Mac as the console, you can do so by answering
Y to this option.
config SERIAL_CPM
tristate "CPM SCC/SMC serial port support"
depends on CPM2 || 8xx
select SERIAL_CORE
help
This driver supports the SCC and SMC serial ports on Motorola
embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
config SERIAL_CPM_CONSOLE
bool "Support for console on CPM SCC/SMC serial port"
depends on SERIAL_CPM=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you wish to use a SCC or SMC CPM UART as the system
console (the system console is the device which receives all kernel
messages and warnings and which allows logins in single user mode).
Even if you say Y here, the currently visible framebuffer console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyCPM0". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_SGI_L1_CONSOLE
bool "SGI Altix L1 serial console support"
depends on IA64_GENERIC || IA64_SGI_SN2
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
help
If you have an SGI Altix and you would like to use the system
controller serial port as your console (you want this!),
say Y. Otherwise, say N.
config SERIAL_MPC52xx
tristate "Freescale MPC52xx/MPC512x family PSC serial support"
depends on PPC_MPC52xx || PPC_MPC512x
select SERIAL_CORE
help
This driver supports MPC52xx and MPC512x PSC serial ports. If you would
like to use them, you must answer Y or M to this option. Note that
for use as console, it must be included in kernel and not as a
module.
config SERIAL_MPC52xx_CONSOLE
bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
depends on SERIAL_MPC52xx=y
select SERIAL_CORE_CONSOLE
help
Select this options if you'd like to use one of the PSC serial port
of the Freescale MPC52xx family as a console.
config SERIAL_MPC52xx_CONSOLE_BAUD
int "Freescale MPC52xx/MPC512x family PSC serial port baud"
depends on SERIAL_MPC52xx_CONSOLE=y
default "9600"
help
Select the MPC52xx console baud rate.
This value is only used if the bootloader doesn't pass in the
console baudrate
config SERIAL_ICOM
tristate "IBM Multiport Serial Adapter"
depends on PCI && PPC_PSERIES
select SERIAL_CORE
select FW_LOADER
help
This driver is for a family of multiport serial adapters
including 2 port RVX, 2 port internal modem, 4 port internal
modem and a split 1 port RVX and 1 port internal modem.
This driver can also be built as a module. If so, the module
will be called icom.
config SERIAL_M32R_SIO
bool "M32R SIO I/F"
depends on M32R
default y
select SERIAL_CORE
help
Say Y here if you want to use the M32R serial controller.
config SERIAL_M32R_SIO_CONSOLE
bool "use SIO console"
depends on SERIAL_M32R_SIO=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you want to support a serial console.
If you use an M3T-M32700UT or an OPSPUT platform,
please say also y for SERIAL_M32R_PLDSIO.
config SERIAL_M32R_PLDSIO
bool "M32R SIO I/F on a PLD"
depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
default n
help
Say Y here if you want to use the M32R serial controller
on a PLD (Programmable Logic Device).
If you use an M3T-M32700UT or an OPSPUT platform,
please say Y.
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
depends on HAS_TXX9_SERIAL
select SERIAL_CORE
default y
config HAS_TXX9_SERIAL
bool
config SERIAL_TXX9_NR_UARTS
int "Maximum number of TMPTX39XX/49XX SIO ports"
depends on SERIAL_TXX9
default "6"
config SERIAL_TXX9_CONSOLE
bool "TMPTX39XX/49XX SIO Console support"
depends on SERIAL_TXX9=y
select SERIAL_CORE_CONSOLE
config SERIAL_TXX9_STDSERIAL
bool "TX39XX/49XX SIO act as standard serial"
depends on !SERIAL_8250 && SERIAL_TXX9
config SERIAL_VR41XX
tristate "NEC VR4100 series Serial Interface Unit support"
depends on CPU_VR41XX
select SERIAL_CORE
help
If you have a NEC VR4100 series processor and you want to use
Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
(not include VR4111/VR4121 DSIU), say Y. Otherwise, say N.
config SERIAL_VR41XX_CONSOLE
bool "Enable NEC VR4100 series Serial Interface Unit console"
depends on SERIAL_VR41XX=y
select SERIAL_CORE_CONSOLE
help
If you have a NEC VR4100 series processor and you want to use
a console on a serial port, say Y. Otherwise, say N.
config SERIAL_JSM
tristate "Digi International NEO PCI Support"
depends on PCI
select SERIAL_CORE
help
This is a driver for Digi International's Neo series
of cards which provide multiple serial ports. You would need
something like this to connect more than two modems to your Linux
box, for instance in order to become a dial-in server. This driver
supports PCI boards only.
If you have a card like this, say Y here, otherwise say N.
To compile this driver as a module, choose M here: the
module will be called jsm.
config SERIAL_SGI_IOC4
tristate "SGI IOC4 controller serial support"
depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
select SERIAL_CORE
help
If you have an SGI Altix with an IOC4 based Base IO card
and wish to use the serial ports on this card, say Y.
Otherwise, say N.
config SERIAL_SGI_IOC3
tristate "SGI Altix IOC3 serial support"
depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
select SERIAL_CORE
help
If you have an SGI Altix with an IOC3 serial card,
say Y or M. Otherwise, say N.
config SERIAL_MSM
bool "MSM on-chip serial port support"
depends on ARCH_MSM
select SERIAL_CORE
config SERIAL_MSM_CONSOLE
bool "MSM serial console support"
depends on SERIAL_MSM=y
select SERIAL_CORE_CONSOLE
config SERIAL_MSM_HS
tristate "MSM UART High Speed: Serial Driver"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
select SERIAL_CORE
help
If you have a machine based on MSM family of SoCs, you
can enable its onboard high speed serial port by enabling
this option.
Choose M here to compile it as a module. The module will be
called msm_serial_hs.
config SERIAL_VT8500
bool "VIA VT8500 on-chip serial port support"
depends on ARCH_VT8500
select SERIAL_CORE
config SERIAL_VT8500_CONSOLE
bool "VIA VT8500 serial console support"
depends on SERIAL_VT8500=y
select SERIAL_CORE_CONSOLE
config SERIAL_NETX
tristate "NetX serial port support"
depends on ARCH_NETX
select SERIAL_CORE
help
If you have a machine based on a Hilscher NetX SoC you
can enable its onboard serial port by enabling this option.
To compile this driver as a module, choose M here: the
module will be called netx-serial.
config SERIAL_NETX_CONSOLE
bool "Console on NetX serial port"
depends on SERIAL_NETX=y
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the Hilscher NetX SoC
you can make it the console by answering Y to this option.
config SERIAL_OF_PLATFORM
tristate "Serial port on Open Firmware platform bus"
depends on OF
depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
help
If you have a PowerPC based system that has serial ports
on a platform specific bus, you should enable this option.
Currently, only 8250 compatible ports are supported, but
others can easily be added.
config SERIAL_OMAP
tristate "OMAP serial port support"
depends on ARCH_OMAP2PLUS
select SERIAL_CORE
help
If you have a machine based on an Texas Instruments OMAP CPU you
can enable its onboard serial ports by enabling this option.
By enabling this option you take advantage of dma feature available
with the omap-serial driver. DMA support can be enabled from platform
data.
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
depends on SERIAL_OMAP=y
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
console.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyOx". (Try "man bootparam" or see the documentation of
your boot loader about how to pass options to the kernel at
boot time.)
config SERIAL_OF_PLATFORM_NWPSERIAL
tristate "NWP serial port driver"
depends on PPC_OF && PPC_DCR
select SERIAL_OF_PLATFORM
select SERIAL_CORE_CONSOLE
select SERIAL_CORE
help
This driver supports the cell network processor nwp serial
device.
config SERIAL_OF_PLATFORM_NWPSERIAL_CONSOLE
bool "Console on NWP serial port"
depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
select SERIAL_CORE_CONSOLE
help
Support for Console on the NWP serial ports.
config SERIAL_LANTIQ
bool "Lantiq serial driver"
depends on LANTIQ
select SERIAL_CORE
select SERIAL_CORE_CONSOLE
help
Support for console and UART on Lantiq SoCs.
config SERIAL_QE
tristate "Freescale QUICC Engine serial port support"
depends on QUICC_ENGINE
select SERIAL_CORE
select FW_LOADER
default n
help
This driver supports the QE serial ports on Freescale embedded
PowerPC that contain a QUICC Engine.
config SERIAL_SCCNXP
tristate "SCCNXP serial port support"
select SERIAL_CORE
help
This selects support for an advanced UART from NXP (Philips).
Supported ICs are SCC2681, SCC2691, SCC2692, SC28L91, SC28L92,
SC28L202, SCC68681 and SCC68692.
config SERIAL_SCCNXP_CONSOLE
bool "Console on SCCNXP serial port"
depends on SERIAL_SCCNXP=y
select SERIAL_CORE_CONSOLE
help
Support for console on SCCNXP serial ports.
config SERIAL_BFIN_SPORT
tristate "Blackfin SPORT emulate UART"
depends on BLACKFIN
select SERIAL_CORE
help
Enable SPORT emulate UART on Blackfin series.
To compile this driver as a module, choose M here: the
module will be called bfin_sport_uart.
config SERIAL_BFIN_SPORT_CONSOLE
bool "Console on Blackfin sport emulated uart"
depends on SERIAL_BFIN_SPORT=y
select SERIAL_CORE_CONSOLE
config SERIAL_BFIN_SPORT0_UART
bool "Enable UART over SPORT0"
depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
help
Enable UART over SPORT0
config SERIAL_BFIN_SPORT0_UART_CTSRTS
bool "Enable UART over SPORT0 hardware flow control"
depends on SERIAL_BFIN_SPORT0_UART
help
Enable hardware flow control in the driver.
config SERIAL_BFIN_SPORT1_UART
bool "Enable UART over SPORT1"
depends on SERIAL_BFIN_SPORT
help
Enable UART over SPORT1
config SERIAL_BFIN_SPORT1_UART_CTSRTS
bool "Enable UART over SPORT1 hardware flow control"
depends on SERIAL_BFIN_SPORT1_UART
help
Enable hardware flow control in the driver.
config SERIAL_BFIN_SPORT2_UART
bool "Enable UART over SPORT2"
depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
help
Enable UART over SPORT2
config SERIAL_BFIN_SPORT2_UART_CTSRTS
bool "Enable UART over SPORT2 hardware flow control"
depends on SERIAL_BFIN_SPORT2_UART
help
Enable hardware flow control in the driver.
config SERIAL_BFIN_SPORT3_UART
bool "Enable UART over SPORT3"
depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
help
Enable UART over SPORT3
config SERIAL_BFIN_SPORT3_UART_CTSRTS
bool "Enable UART over SPORT3 hardware flow control"
depends on SERIAL_BFIN_SPORT3_UART
help
Enable hardware flow control in the driver.
config SERIAL_TIMBERDALE
tristate "Support for timberdale UART"
select SERIAL_CORE
---help---
Add support for UART controller on timberdale.
config SERIAL_BCM63XX
tristate "bcm63xx serial port support"
select SERIAL_CORE
depends on BCM63XX
help
If you have a bcm63xx CPU, you can enable its onboard
serial port by enabling this options.
To compile this driver as a module, choose M here: the
module will be called bcm963xx_uart.
config SERIAL_BCM63XX_CONSOLE
bool "Console on bcm63xx serial port"
depends on SERIAL_BCM63XX=y
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the bcm63xx CPU
you can make it the console by answering Y to this option.
config SERIAL_GRLIB_GAISLER_APBUART
tristate "GRLIB APBUART serial support"
depends on OF && SPARC
select SERIAL_CORE
---help---
Add support for the GRLIB APBUART serial port.
config SERIAL_GRLIB_GAISLER_APBUART_CONSOLE
bool "Console on GRLIB APBUART serial port"
depends on SERIAL_GRLIB_GAISLER_APBUART=y
select SERIAL_CORE_CONSOLE
help
Support for running a console on the GRLIB APBUART
config SERIAL_ALTERA_JTAGUART
tristate "Altera JTAG UART support"
select SERIAL_CORE
help
This driver supports the Altera JTAG UART port.
config SERIAL_ALTERA_JTAGUART_CONSOLE
bool "Altera JTAG UART console support"
depends on SERIAL_ALTERA_JTAGUART=y
select SERIAL_CORE_CONSOLE
help
Enable a Altera JTAG UART port to be the system console.
config SERIAL_ALTERA_JTAGUART_CONSOLE_BYPASS
bool "Bypass output when no connection"
depends on SERIAL_ALTERA_JTAGUART_CONSOLE
select SERIAL_CORE_CONSOLE
help
Bypass console output and keep going even if there is no
JTAG terminal connection with the host.
config SERIAL_ALTERA_UART
tristate "Altera UART support"
select SERIAL_CORE
help
This driver supports the Altera softcore UART port.
config SERIAL_ALTERA_UART_MAXPORTS
int "Maximum number of Altera UART ports"
depends on SERIAL_ALTERA_UART
default 4
help
This setting lets you define the maximum number of the Altera
UART ports. The usual default varies from board to board, and
this setting is a way of catering for that.
config SERIAL_ALTERA_UART_BAUDRATE
int "Default baudrate for Altera UART ports"
depends on SERIAL_ALTERA_UART
default 115200
help
This setting lets you define what the default baudrate is for the
Altera UART ports. The usual default varies from board to board,
and this setting is a way of catering for that.
config SERIAL_ALTERA_UART_CONSOLE
bool "Altera UART console support"
depends on SERIAL_ALTERA_UART=y
select SERIAL_CORE_CONSOLE
help
Enable a Altera UART port to be the system console.
config SERIAL_IFX6X60
tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)"
depends on GPIOLIB && SPI
help
Support for the IFX6x60 modem devices on Intel MID platforms.
config SERIAL_PCH_UART
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
depends on PCI
select SERIAL_CORE
help
This driver is for PCH(Platform controller Hub) UART of Intel EG20T
which is an IOH(Input/Output Hub) for x86 embedded processor.
Enabling PCH_DMA, this PCH UART works as DMA mode.
This driver also can be used for LAPIS Semiconductor IOH(Input/
Output Hub), ML7213, ML7223 and ML7831.
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config SERIAL_PCH_UART_CONSOLE
bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
depends on SERIAL_PCH_UART=y
select SERIAL_CORE_CONSOLE
help
Say Y here if you wish to use the PCH UART as the system console
(the system console is the device which receives all kernel messages and
warnings and which allows logins in single user mode).
config SERIAL_MSM_SMD
bool "Enable tty device interface for some SMD ports"
default n
depends on MSM_SMD
help
Enables userspace clients to read and write to some streaming SMD
ports via tty device interface for MSM chipset.
config SERIAL_MXS_AUART
depends on ARCH_MXS
tristate "MXS AUART support"
select SERIAL_CORE
help
This driver supports the MXS Application UART (AUART) port.
config SERIAL_MXS_AUART_CONSOLE
bool "MXS AUART console support"
depends on SERIAL_MXS_AUART=y
select SERIAL_CORE_CONSOLE
help
Enable a MXS AUART port to be the system console.
config SERIAL_XILINX_PS_UART
tristate "Xilinx PS UART support"
depends on OF
select SERIAL_CORE
help
This driver supports the Xilinx PS UART port.
config SERIAL_XILINX_PS_UART_CONSOLE
bool "Xilinx PS UART console support"
depends on SERIAL_XILINX_PS_UART=y
select SERIAL_CORE_CONSOLE
help
Enable a Xilinx PS UART port to be the system console.
config SERIAL_AR933X
tristate "AR933X serial port support"
depends on HAVE_CLK && SOC_AR933X
select SERIAL_CORE
help
If you have an Atheros AR933X SOC based board and want to use the
built-in UART of the SoC, say Y to this option.
To compile this driver as a module, choose M here: the
module will be called ar933x_uart.
config SERIAL_AR933X_CONSOLE
bool "Console on AR933X serial port"
depends on SERIAL_AR933X=y
select SERIAL_CORE_CONSOLE
help
Enable a built-in UART port of the AR933X to be the system console.
config SERIAL_AR933X_NR_UARTS
int "Maximum number of AR933X serial ports"
depends on SERIAL_AR933X
default "2"
help
Set this to the number of serial ports you want the driver
to support.
config SERIAL_EFM32_UART
tristate "EFM32 UART/USART port"
depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
select SERIAL_CORE
help
This driver support the USART and UART ports on
Energy Micro's efm32 SoCs.
config SERIAL_EFM32_UART_CONSOLE
bool "EFM32 UART/USART console support"
depends on SERIAL_EFM32_UART=y
select SERIAL_CORE_CONSOLE
config SERIAL_TILEGX
tristate "TILE-Gx on-chip serial port support"
depends on TILEGX
select TILE_GXIO_UART
select SERIAL_CORE
---help---
This device provides access to the on-chip UARTs on the TILE-Gx
processor.
config SERIAL_ARC
tristate "ARC UART driver support"
select SERIAL_CORE
help
Driver for on-chip UART for ARC(Synopsys) for the legacy
FPGA Boards (ML50x/ARCAngel4)
config SERIAL_ARC_CONSOLE
bool "Console on ARC UART"
depends on SERIAL_ARC=y
select SERIAL_CORE_CONSOLE
help
Enable system Console on ARC UART
config SERIAL_ARC_NR_PORTS
int "Number of ARC UART ports"
depends on SERIAL_ARC
range 1 3
default "1"
help
Set this to the number of serial ports you want the driver
to support.
config SERIAL_RP2
tristate "Comtrol RocketPort EXPRESS/INFINITY support"
depends on PCI
select SERIAL_CORE
help
This driver supports the Comtrol RocketPort EXPRESS and
RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
These adapters use a "RocketPort 2" ASIC that is not compatible
with the original RocketPort driver (CONFIG_ROCKETPORT).
To compile this driver as a module, choose M here: the
module will be called rp2.
If you want to compile this driver into the kernel, say Y here. If
you don't have a suitable RocketPort card installed, say N.
config SERIAL_RP2_NR_UARTS
int "Maximum number of RocketPort EXPRESS/INFINITY ports"
depends on SERIAL_RP2
default "32"
help
If multiple cards are present, the default limit of 32 ports may
need to be increased.
config SERIAL_FSL_LPUART
tristate "Freescale lpuart serial port support"
select SERIAL_CORE
help
Support for the on-chip lpuart on some Freescale SOCs.
config SERIAL_FSL_LPUART_CONSOLE
bool "Console on Freescale lpuart serial port"
depends on SERIAL_FSL_LPUART=y
select SERIAL_CORE_CONSOLE
help
If you have enabled the lpuart serial port on the Freescale SoCs,
you can make it the console by answering Y to this option.
config SERIAL_ST_ASC
tristate "ST ASC serial port support"
select SERIAL_CORE
depends on ARM || COMPILE_TEST
help
This driver is for the on-chip Asychronous Serial Controller on
STMicroelectronics STi SoCs.
ASC is embedded in ST COMMS IP block. It supports Rx & Tx functionality.
It support all industry standard baud rates.
If unsure, say N.
config SERIAL_ST_ASC_CONSOLE
bool "Support for console on ST ASC"
depends on SERIAL_ST_ASC=y
select SERIAL_CORE_CONSOLE
endmenu
endif # TTY