- 根目录:
- drivers
- acpi
- acpica
- evxfgpe.c
/******************************************************************************
*
* Module Name: evxfgpe - External Interfaces for General Purpose Events (GPEs)
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2013, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define EXPORT_ACPI_INTERFACES
#include <acpi/acpi.h>
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evxfgpe")
#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
/*******************************************************************************
*
* FUNCTION: acpi_update_all_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Complete GPE initialization and enable all GPEs that have
* associated _Lxx or _Exx methods and are not pointed to by any
* device _PRW methods (this indicates that these GPEs are
* generally intended for system or device wakeup. Such GPEs
* have to be enabled directly when the devices whose _PRW
* methods point to them are set up for wakeup signaling.)
*
* NOTE: Should be called after any GPEs are added to the system. Primarily,
* after the system _PRW methods have been run, but also after a GPE Block
* Device has been added or if any new GPE methods have been added via a
* dynamic table load.
*
******************************************************************************/
acpi_status acpi_update_all_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_update_all_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (acpi_gbl_all_gpes_initialized) {
goto unlock_and_exit;
}
status = acpi_ev_walk_gpe_list(acpi_ev_initialize_gpe_block, NULL);
if (ACPI_SUCCESS(status)) {
acpi_gbl_all_gpes_initialized = TRUE;
}
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_update_all_gpes)
/*******************************************************************************
*
* FUNCTION: acpi_enable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is
* hardware-enabled.
*
******************************************************************************/
acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_enable_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
status = acpi_ev_add_gpe_reference(gpe_event_info);
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_disable_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Remove a reference to a GPE. When the last reference is
* removed, only then is the GPE disabled (for runtime GPEs), or
* the GPE mask bit disabled (for wake GPEs)
*
******************************************************************************/
acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_disable_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
status = acpi_ev_remove_gpe_reference(gpe_event_info) ;
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_setup_gpe_for_wake
*
* PARAMETERS: wake_device - Device associated with the GPE (via _PRW)
* gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Mark a GPE as having the ability to wake the system. This
* interface is intended to be used as the host executes the
* _PRW methods (Power Resources for Wake) in the system tables.
* Each _PRW appears under a Device Object (The wake_device), and
* contains the info for the wake GPE associated with the
* wake_device.
*
******************************************************************************/
acpi_status
acpi_setup_gpe_for_wake(acpi_handle wake_device,
acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_namespace_node *device_node;
struct acpi_gpe_notify_info *notify;
struct acpi_gpe_notify_info *new_notify;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);
/* Parameter Validation */
if (!wake_device) {
/*
* By forcing wake_device to be valid, we automatically enable the
* implicit notify feature on all hosts.
*/
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Handle root object case */
if (wake_device == ACPI_ROOT_OBJECT) {
device_node = acpi_gbl_root_node;
} else {
device_node =
ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
}
/* Validate wake_device is of type Device */
if (device_node->type != ACPI_TYPE_DEVICE) {
return_ACPI_STATUS (AE_BAD_PARAMETER);
}
/*
* Allocate a new notify object up front, in case it is needed.
* Memory allocation while holding a spinlock is a big no-no
* on some hosts.
*/
new_notify = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_gpe_notify_info));
if (!new_notify) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/*
* If there is no method or handler for this GPE, then the
* wake_device will be notified whenever this GPE fires. This is
* known as an "implicit notify". Note: The GPE is assumed to be
* level-triggered (for windows compatibility).
*/
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_NONE) {
/*
* This is the first device for implicit notify on this GPE.
* Just set the flags here, and enter the NOTIFY block below.
*/
gpe_event_info->flags =
(ACPI_GPE_DISPATCH_NOTIFY | ACPI_GPE_LEVEL_TRIGGERED);
}
/*
* If we already have an implicit notify on this GPE, add
* this device to the notify list.
*/
if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
ACPI_GPE_DISPATCH_NOTIFY) {
/* Ensure that the device is not already in the list */
notify = gpe_event_info->dispatch.notify_list;
while (notify) {
if (notify->device_node == device_node) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
notify = notify->next;
}
/* Add this device to the notify list for this GPE */
new_notify->device_node = device_node;
new_notify->next = gpe_event_info->dispatch.notify_list;
gpe_event_info->dispatch.notify_list = new_notify;
new_notify = NULL;
}
/* Mark the GPE as a possible wake event */
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
status = AE_OK;
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
/* Delete the notify object if it was not used above */
if (new_notify) {
ACPI_FREE(new_notify);
}
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)
/*******************************************************************************
*
* FUNCTION: acpi_set_gpe_wake_mask
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
* action - Enable or Disable
*
* RETURN: Status
*
* DESCRIPTION: Set or clear the GPE's wakeup enable mask bit. The GPE must
* already be marked as a WAKE GPE.
*
******************************************************************************/
acpi_status
acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
struct acpi_gpe_register_info *gpe_register_info;
acpi_cpu_flags flags;
u32 register_bit;
ACPI_FUNCTION_TRACE(acpi_set_gpe_wake_mask);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/*
* Ensure that we have a valid GPE number and that this GPE is in
* fact a wake GPE
*/
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
if (!(gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
status = AE_TYPE;
goto unlock_and_exit;
}
gpe_register_info = gpe_event_info->register_info;
if (!gpe_register_info) {
status = AE_NOT_EXIST;
goto unlock_and_exit;
}
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
/* Perform the action */
switch (action) {
case ACPI_GPE_ENABLE:
ACPI_SET_BIT(gpe_register_info->enable_for_wake,
(u8)register_bit);
break;
case ACPI_GPE_DISABLE:
ACPI_CLEAR_BIT(gpe_register_info->enable_for_wake,
(u8)register_bit);
break;
default:
ACPI_ERROR((AE_INFO, "%u, Invalid action", action));
status = AE_BAD_PARAMETER;
break;
}
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_set_gpe_wake_mask)
/*******************************************************************************
*
* FUNCTION: acpi_clear_gpe
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* DESCRIPTION: Clear an ACPI event (general purpose)
*
******************************************************************************/
acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_clear_gpe);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
status = acpi_hw_clear_gpe(gpe_event_info);
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_clear_gpe)
/*******************************************************************************
*
* FUNCTION: acpi_get_gpe_status
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
* event_status - Where the current status of the event
* will be returned
*
* RETURN: Status
*
* DESCRIPTION: Get the current status of a GPE (signalled/not_signalled)
*
******************************************************************************/
acpi_status
acpi_get_gpe_status(acpi_handle gpe_device,
u32 gpe_number, acpi_event_status *event_status)
{
acpi_status status = AE_OK;
struct acpi_gpe_event_info *gpe_event_info;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_get_gpe_status);
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (!gpe_event_info) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Obtain status on the requested GPE number */
status = acpi_hw_get_gpe_status(gpe_event_info, event_status);
if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
*event_status |= ACPI_EVENT_FLAG_HANDLE;
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_get_gpe_status)
/******************************************************************************
*
* FUNCTION: acpi_disable_all_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Disable and clear all GPEs in all GPE blocks
*
******************************************************************************/
acpi_status acpi_disable_all_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_disable_all_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_hw_disable_all_gpes();
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_disable_all_gpes)
/******************************************************************************
*
* FUNCTION: acpi_enable_all_runtime_gpes
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Enable all "runtime" GPEs, in all GPE blocks
*
******************************************************************************/
acpi_status acpi_enable_all_runtime_gpes(void)
{
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_enable_all_runtime_gpes);
status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status = acpi_hw_enable_all_runtime_gpes();
(void)acpi_ut_release_mutex(ACPI_MTX_EVENTS);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes)
/*******************************************************************************
*
* FUNCTION: acpi_install_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
* gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* interrupt_number - H/W interrupt for the block
*
* RETURN: Status
*
* DESCRIPTION: Create and Install a block of GPE registers. The GPEs are not
* enabled here.
*
******************************************************************************/
acpi_status
acpi_install_gpe_block(acpi_handle gpe_device,
struct acpi_generic_address *gpe_block_address,
u32 register_count, u32 interrupt_number)
{
acpi_status status;
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
struct acpi_gpe_block_info *gpe_block;
ACPI_FUNCTION_TRACE(acpi_install_gpe_block);
if ((!gpe_device) || (!gpe_block_address) || (!register_count)) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(gpe_device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/*
* For user-installed GPE Block Devices, the gpe_block_base_number
* is always zero
*/
status =
acpi_ev_create_gpe_block(node, gpe_block_address, register_count, 0,
interrupt_number, &gpe_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
/* Install block in the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc) {
/*
* No object, create a new one (Device nodes do not always have
* an attached object)
*/
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE);
if (!obj_desc) {
status = AE_NO_MEMORY;
goto unlock_and_exit;
}
status =
acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE);
/* Remove local reference to the object */
acpi_ut_remove_reference(obj_desc);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
}
/* Now install the GPE block in the device_object */
obj_desc->device.gpe_block = gpe_block;
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_install_gpe_block)
/*******************************************************************************
*
* FUNCTION: acpi_remove_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
*
* RETURN: Status
*
* DESCRIPTION: Remove a previously installed block of GPE registers
*
******************************************************************************/
acpi_status acpi_remove_gpe_block(acpi_handle gpe_device)
{
union acpi_operand_object *obj_desc;
acpi_status status;
struct acpi_namespace_node *node;
ACPI_FUNCTION_TRACE(acpi_remove_gpe_block);
if (!gpe_device) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
node = acpi_ns_validate_handle(gpe_device);
if (!node) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
/* Get the device_object attached to the node */
obj_desc = acpi_ns_get_attached_object(node);
if (!obj_desc || !obj_desc->device.gpe_block) {
return_ACPI_STATUS(AE_NULL_OBJECT);
}
/* Delete the GPE block (but not the device_object) */
status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block);
if (ACPI_SUCCESS(status)) {
obj_desc->device.gpe_block = NULL;
}
unlock_and_exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)
/*******************************************************************************
*
* FUNCTION: acpi_get_gpe_device
*
* PARAMETERS: index - System GPE index (0-current_gpe_count)
* gpe_device - Where the parent GPE Device is returned
*
* RETURN: Status
*
* DESCRIPTION: Obtain the GPE device associated with the input index. A NULL
* gpe device indicates that the gpe number is contained in one of
* the FADT-defined gpe blocks. Otherwise, the GPE block device.
*
******************************************************************************/
acpi_status acpi_get_gpe_device(u32 index, acpi_handle * gpe_device)
{
struct acpi_gpe_device_info info;
acpi_status status;
ACPI_FUNCTION_TRACE(acpi_get_gpe_device);
if (!gpe_device) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (index >= acpi_current_gpe_count) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
/* Setup and walk the GPE list */
info.index = index;
info.status = AE_NOT_EXIST;
info.gpe_device = NULL;
info.next_block_base_index = 0;
status = acpi_ev_walk_gpe_list(acpi_ev_get_gpe_device, &info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
*gpe_device = ACPI_CAST_PTR(acpi_handle, info.gpe_device);
return_ACPI_STATUS(info.status);
}
ACPI_EXPORT_SYMBOL(acpi_get_gpe_device)
#endif /* !ACPI_REDUCED_HARDWARE */