- 根目录:
- drivers
- input
- mouse
- appletouch.c
/*
* Apple USB Touchpad (for post-February 2005 PowerBooks and MacBooks) driver
*
* Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2005-2008 Johannes Berg (johannes@sipsolutions.net)
* Copyright (C) 2005-2008 Stelian Pop (stelian@popies.net)
* Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
* Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
* Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
* Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
* Copyright (C) 2007-2008 Sven Anders (anders@anduras.de)
*
* Thanks to Alex Harper <basilisk@foobox.net> for his inputs.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb/input.h>
/*
* Note: We try to keep the touchpad aspect ratio while still doing only
* simple arithmetics:
* 0 <= x <= (xsensors - 1) * xfact
* 0 <= y <= (ysensors - 1) * yfact
*/
struct atp_info {
int xsensors; /* number of X sensors */
int xsensors_17; /* 17" models have more sensors */
int ysensors; /* number of Y sensors */
int xfact; /* X multiplication factor */
int yfact; /* Y multiplication factor */
int datalen; /* size of USB transfers */
void (*callback)(struct urb *); /* callback function */
};
static void atp_complete_geyser_1_2(struct urb *urb);
static void atp_complete_geyser_3_4(struct urb *urb);
static const struct atp_info fountain_info = {
.xsensors = 16,
.xsensors_17 = 26,
.ysensors = 16,
.xfact = 64,
.yfact = 43,
.datalen = 81,
.callback = atp_complete_geyser_1_2,
};
static const struct atp_info geyser1_info = {
.xsensors = 16,
.xsensors_17 = 26,
.ysensors = 16,
.xfact = 64,
.yfact = 43,
.datalen = 81,
.callback = atp_complete_geyser_1_2,
};
static const struct atp_info geyser2_info = {
.xsensors = 15,
.xsensors_17 = 20,
.ysensors = 9,
.xfact = 64,
.yfact = 43,
.datalen = 64,
.callback = atp_complete_geyser_1_2,
};
static const struct atp_info geyser3_info = {
.xsensors = 20,
.ysensors = 10,
.xfact = 64,
.yfact = 64,
.datalen = 64,
.callback = atp_complete_geyser_3_4,
};
static const struct atp_info geyser4_info = {
.xsensors = 20,
.ysensors = 10,
.xfact = 64,
.yfact = 64,
.datalen = 64,
.callback = atp_complete_geyser_3_4,
};
#define ATP_DEVICE(prod, info) \
{ \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
USB_DEVICE_ID_MATCH_INT_CLASS | \
USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
.idVendor = 0x05ac, /* Apple */ \
.idProduct = (prod), \
.bInterfaceClass = 0x03, \
.bInterfaceProtocol = 0x02, \
.driver_info = (unsigned long) &info, \
}
/*
* Table of devices (Product IDs) that work with this driver.
* (The names come from Info.plist in AppleUSBTrackpad.kext,
* According to Info.plist Geyser IV is the same as Geyser III.)
*/
static struct usb_device_id atp_table[] = {
/* PowerBooks Feb 2005, iBooks G4 */
ATP_DEVICE(0x020e, fountain_info), /* FOUNTAIN ANSI */
ATP_DEVICE(0x020f, fountain_info), /* FOUNTAIN ISO */
ATP_DEVICE(0x030a, fountain_info), /* FOUNTAIN TP ONLY */
ATP_DEVICE(0x030b, geyser1_info), /* GEYSER 1 TP ONLY */
/* PowerBooks Oct 2005 */
ATP_DEVICE(0x0214, geyser2_info), /* GEYSER 2 ANSI */
ATP_DEVICE(0x0215, geyser2_info), /* GEYSER 2 ISO */
ATP_DEVICE(0x0216, geyser2_info), /* GEYSER 2 JIS */
/* Core Duo MacBook & MacBook Pro */
ATP_DEVICE(0x0217, geyser3_info), /* GEYSER 3 ANSI */
ATP_DEVICE(0x0218, geyser3_info), /* GEYSER 3 ISO */
ATP_DEVICE(0x0219, geyser3_info), /* GEYSER 3 JIS */
/* Core2 Duo MacBook & MacBook Pro */
ATP_DEVICE(0x021a, geyser4_info), /* GEYSER 4 ANSI */
ATP_DEVICE(0x021b, geyser4_info), /* GEYSER 4 ISO */
ATP_DEVICE(0x021c, geyser4_info), /* GEYSER 4 JIS */
/* Core2 Duo MacBook3,1 */
ATP_DEVICE(0x0229, geyser4_info), /* GEYSER 4 HF ANSI */
ATP_DEVICE(0x022a, geyser4_info), /* GEYSER 4 HF ISO */
ATP_DEVICE(0x022b, geyser4_info), /* GEYSER 4 HF JIS */
/* Terminating entry */
{ }
};
MODULE_DEVICE_TABLE(usb, atp_table);
/* maximum number of sensors */
#define ATP_XSENSORS 26
#define ATP_YSENSORS 16
/* amount of fuzz this touchpad generates */
#define ATP_FUZZ 16
/* maximum pressure this driver will report */
#define ATP_PRESSURE 300
/*
* Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is
* ignored.
*/
#define ATP_THRESHOLD 5
/* Geyser initialization constants */
#define ATP_GEYSER_MODE_READ_REQUEST_ID 1
#define ATP_GEYSER_MODE_WRITE_REQUEST_ID 9
#define ATP_GEYSER_MODE_REQUEST_VALUE 0x300
#define ATP_GEYSER_MODE_REQUEST_INDEX 0
#define ATP_GEYSER_MODE_VENDOR_VALUE 0x04
/**
* enum atp_status_bits - status bit meanings
*
* These constants represent the meaning of the status bits.
* (only Geyser 3/4)
*
* @ATP_STATUS_BUTTON: The button was pressed
* @ATP_STATUS_BASE_UPDATE: Update of the base values (untouched pad)
* @ATP_STATUS_FROM_RESET: Reset previously performed
*/
enum atp_status_bits {
ATP_STATUS_BUTTON = BIT(0),
ATP_STATUS_BASE_UPDATE = BIT(2),
ATP_STATUS_FROM_RESET = BIT(4),
};
/* Structure to hold all of our device specific stuff */
struct atp {
char phys[64];
struct usb_device *udev; /* usb device */
struct usb_interface *intf; /* usb interface */
struct urb *urb; /* usb request block */
u8 *data; /* transferred data */
struct input_dev *input; /* input dev */
const struct atp_info *info; /* touchpad model */
bool open;
bool valid; /* are the samples valid? */
bool size_detect_done;
bool overflow_warned;
int x_old; /* last reported x/y, */
int y_old; /* used for smoothing */
signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS];
signed char xy_old[ATP_XSENSORS + ATP_YSENSORS];
int xy_acc[ATP_XSENSORS + ATP_YSENSORS];
int idlecount; /* number of empty packets */
struct work_struct work;
};
#define dbg_dump(msg, tab) \
if (debug > 1) { \
int __i; \
printk(KERN_DEBUG "appletouch: %s", msg); \
for (__i = 0; __i < ATP_XSENSORS + ATP_YSENSORS; __i++) \
printk(" %02x", tab[__i]); \
printk("\n"); \
}
#define dprintk(format, a...) \
do { \
if (debug) \
printk(KERN_DEBUG format, ##a); \
} while (0)
MODULE_AUTHOR("Johannes Berg");
MODULE_AUTHOR("Stelian Pop");
MODULE_AUTHOR("Frank Arnold");
MODULE_AUTHOR("Michael Hanselmann");
MODULE_AUTHOR("Sven Anders");
MODULE_DESCRIPTION("Apple PowerBook and MacBook USB touchpad driver");
MODULE_LICENSE("GPL");
/*
* Make the threshold a module parameter
*/
static int threshold = ATP_THRESHOLD;
module_param(threshold, int, 0644);
MODULE_PARM_DESC(threshold, "Discard any change in data from a sensor"
" (the trackpad has many of these sensors)"
" less than this value.");
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Activate debugging output");
/*
* By default newer Geyser devices send standard USB HID mouse
* packets (Report ID 2). This code changes device mode, so it
* sends raw sensor reports (Report ID 5).
*/
static int atp_geyser_init(struct atp *dev)
{
struct usb_device *udev = dev->udev;
char *data;
int size;
int i;
int ret;
data = kmalloc(8, GFP_KERNEL);
if (!data) {
dev_err(&dev->intf->dev, "Out of memory\n");
return -ENOMEM;
}
size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
ATP_GEYSER_MODE_READ_REQUEST_ID,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: read error\n");
for (i = 0; i < 8; i++)
dprintk("appletouch[%d]: %d\n", i, data[i]);
dev_err(&dev->intf->dev, "Failed to read mode from device.\n");
ret = -EIO;
goto out_free;
}
/* Apply the mode switch */
data[0] = ATP_GEYSER_MODE_VENDOR_VALUE;
size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
ATP_GEYSER_MODE_WRITE_REQUEST_ID,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: write error\n");
for (i = 0; i < 8; i++)
dprintk("appletouch[%d]: %d\n", i, data[i]);
dev_err(&dev->intf->dev, "Failed to request geyser raw mode\n");
ret = -EIO;
goto out_free;
}
ret = 0;
out_free:
kfree(data);
return ret;
}
/*
* Reinitialise the device. This usually stops stream of empty packets
* coming from it.
*/
static void atp_reinit(struct work_struct *work)
{
struct atp *dev = container_of(work, struct atp, work);
int retval;
dprintk("appletouch: putting appletouch to sleep (reinit)\n");
atp_geyser_init(dev);
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
if (retval)
dev_err(&dev->intf->dev,
"atp_reinit: usb_submit_urb failed with error %d\n",
retval);
}
static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
int *z, int *fingers)
{
int i;
/* values to calculate mean */
int pcum = 0, psum = 0;
int is_increasing = 0;
*fingers = 0;
for (i = 0; i < nb_sensors; i++) {
if (xy_sensors[i] < threshold) {
if (is_increasing)
is_increasing = 0;
continue;
}
/*
* Makes the finger detection more versatile. For example,
* two fingers with no gap will be detected. Also, my
* tests show it less likely to have intermittent loss
* of multiple finger readings while moving around (scrolling).
*
* Changes the multiple finger detection to counting humps on
* sensors (transitions from nonincreasing to increasing)
* instead of counting transitions from low sensors (no
* finger reading) to high sensors (finger above
* sensor)
*
* - Jason Parekh <jasonparekh@gmail.com>
*/
if (i < 1 ||
(!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) {
(*fingers)++;
is_increasing = 1;
} else if (i > 0 && (xy_sensors[i - 1] - xy_sensors[i] > threshold)) {
is_increasing = 0;
}
/*
* Subtracts threshold so a high sensor that just passes the
* threshold won't skew the calculated absolute coordinate.
* Fixes an issue where slowly moving the mouse would
* occasionally jump a number of pixels (slowly moving the
* finger makes this issue most apparent.)
*/
pcum += (xy_sensors[i] - threshold) * i;
psum += (xy_sensors[i] - threshold);
}
if (psum > 0) {
*z = psum;
return pcum * fact / psum;
}
return 0;
}
static inline void atp_report_fingers(struct input_dev *input, int fingers)
{
input_report_key(input, BTN_TOOL_FINGER, fingers == 1);
input_report_key(input, BTN_TOOL_DOUBLETAP, fingers == 2);
input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2);
}
/* Check URB status and for correct length of data package */
#define ATP_URB_STATUS_SUCCESS 0
#define ATP_URB_STATUS_ERROR 1
#define ATP_URB_STATUS_ERROR_FATAL 2
static int atp_status_check(struct urb *urb)
{
struct atp *dev = urb->context;
struct usb_interface *intf = dev->intf;
switch (urb->status) {
case 0:
/* success */
break;
case -EOVERFLOW:
if (!dev->overflow_warned) {
dev_warn(&intf->dev,
"appletouch: OVERFLOW with data length %d, actual length is %d\n",
dev->info->datalen, dev->urb->actual_length);
dev->overflow_warned = true;
}
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* This urb is terminated, clean up */
dev_dbg(&intf->dev,
"atp_complete: urb shutting down with status: %d\n",
urb->status);
return ATP_URB_STATUS_ERROR_FATAL;
default:
dev_dbg(&intf->dev,
"atp_complete: nonzero urb status received: %d\n",
urb->status);
return ATP_URB_STATUS_ERROR;
}
/* drop incomplete datasets */
if (dev->urb->actual_length != dev->info->datalen) {
dprintk("appletouch: incomplete data package"
" (first byte: %d, length: %d).\n",
dev->data[0], dev->urb->actual_length);
return ATP_URB_STATUS_ERROR;
}
return ATP_URB_STATUS_SUCCESS;
}
static void atp_detect_size(struct atp *dev)
{
int i;
/* 17" Powerbooks have extra X sensors */
for (i = dev->info->xsensors; i < ATP_XSENSORS; i++) {
if (dev->xy_cur[i]) {
dev_info(&dev->intf->dev,
"appletouch: 17\" model detected.\n");
input_set_abs_params(dev->input, ABS_X, 0,
(dev->info->xsensors_17 - 1) *
dev->info->xfact - 1,
ATP_FUZZ, 0);
break;
}
}
}
/*
* USB interrupt callback functions
*/
/* Interrupt function for older touchpads: FOUNTAIN/GEYSER1/GEYSER2 */
static void atp_complete_geyser_1_2(struct urb *urb)
{
int x, y, x_z, y_z, x_f, y_f;
int retval, i, j;
int key;
struct atp *dev = urb->context;
int status = atp_status_check(urb);
if (status == ATP_URB_STATUS_ERROR_FATAL)
return;
else if (status == ATP_URB_STATUS_ERROR)
goto exit;
/* reorder the sensors values */
if (dev->info == &geyser2_info) {
memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
/*
* The values are laid out like this:
* Y1, Y2, -, Y3, Y4, -, ..., X1, X2, -, X3, X4, -, ...
* '-' is an unused value.
*/
/* read X values */
for (i = 0, j = 19; i < 20; i += 2, j += 3) {
dev->xy_cur[i] = dev->data[j];
dev->xy_cur[i + 1] = dev->data[j + 1];
}
/* read Y values */
for (i = 0, j = 1; i < 9; i += 2, j += 3) {
dev->xy_cur[ATP_XSENSORS + i] = dev->data[j];
dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 1];
}
} else {
for (i = 0; i < 8; i++) {
/* X values */
dev->xy_cur[i + 0] = dev->data[5 * i + 2];
dev->xy_cur[i + 8] = dev->data[5 * i + 4];
dev->xy_cur[i + 16] = dev->data[5 * i + 42];
if (i < 2)
dev->xy_cur[i + 24] = dev->data[5 * i + 44];
/* Y values */
dev->xy_cur[ATP_XSENSORS + i] = dev->data[5 * i + 1];
dev->xy_cur[ATP_XSENSORS + i + 8] = dev->data[5 * i + 3];
}
}
dbg_dump("sample", dev->xy_cur);
if (!dev->valid) {
/* first sample */
dev->valid = true;
dev->x_old = dev->y_old = -1;
/* Store first sample */
memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
/* Perform size detection, if not done already */
if (unlikely(!dev->size_detect_done)) {
atp_detect_size(dev);
dev->size_detect_done = 1;
goto exit;
}
}
for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
/* accumulate the change */
signed char change = dev->xy_old[i] - dev->xy_cur[i];
dev->xy_acc[i] -= change;
/* prevent down drifting */
if (dev->xy_acc[i] < 0)
dev->xy_acc[i] = 0;
}
memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
dbg_dump("accumulator", dev->xy_acc);
x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS,
dev->info->xfact, &x_z, &x_f);
y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
dev->info->yfact, &y_z, &y_f);
key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON;
if (x && y) {
if (dev->x_old != -1) {
x = (dev->x_old * 3 + x) >> 2;
y = (dev->y_old * 3 + y) >> 2;
dev->x_old = x;
dev->y_old = y;
if (debug > 1)
printk(KERN_DEBUG "appletouch: "
"X: %3d Y: %3d Xz: %3d Yz: %3d\n",
x, y, x_z, y_z);
input_report_key(dev->input, BTN_TOUCH, 1);
input_report_abs(dev->input, ABS_X, x);
input_report_abs(dev->input, ABS_Y, y);
input_report_abs(dev->input, ABS_PRESSURE,
min(ATP_PRESSURE, x_z + y_z));
atp_report_fingers(dev->input, max(x_f, y_f));
}
dev->x_old = x;
dev->y_old = y;
} else if (!x && !y) {
dev->x_old = dev->y_old = -1;
input_report_key(dev->input, BTN_TOUCH, 0);
input_report_abs(dev->input, ABS_PRESSURE, 0);
atp_report_fingers(dev->input, 0);
/* reset the accumulator on release */
memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
}
input_report_key(dev->input, BTN_LEFT, key);
input_sync(dev->input);
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
if (retval)
dev_err(&dev->intf->dev,
"atp_complete: usb_submit_urb failed with result %d\n",
retval);
}
/* Interrupt function for older touchpads: GEYSER3/GEYSER4 */
static void atp_complete_geyser_3_4(struct urb *urb)
{
int x, y, x_z, y_z, x_f, y_f;
int retval, i, j;
int key;
struct atp *dev = urb->context;
int status = atp_status_check(urb);
if (status == ATP_URB_STATUS_ERROR_FATAL)
return;
else if (status == ATP_URB_STATUS_ERROR)
goto exit;
/* Reorder the sensors values:
*
* The values are laid out like this:
* -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ...
* '-' is an unused value.
*/
/* read X values */
for (i = 0, j = 19; i < 20; i += 2, j += 3) {
dev->xy_cur[i] = dev->data[j + 1];
dev->xy_cur[i + 1] = dev->data[j + 2];
}
/* read Y values */
for (i = 0, j = 1; i < 9; i += 2, j += 3) {
dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1];
dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2];
}
dbg_dump("sample", dev->xy_cur);
/* Just update the base values (i.e. touchpad in untouched state) */
if (dev->data[dev->info->datalen - 1] & ATP_STATUS_BASE_UPDATE) {
dprintk("appletouch: updated base values\n");
memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
goto exit;
}
for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
/* calculate the change */
dev->xy_acc[i] = dev->xy_cur[i] - dev->xy_old[i];
/* this is a round-robin value, so couple with that */
if (dev->xy_acc[i] > 127)
dev->xy_acc[i] -= 256;
if (dev->xy_acc[i] < -127)
dev->xy_acc[i] += 256;
/* prevent down drifting */
if (dev->xy_acc[i] < 0)
dev->xy_acc[i] = 0;
}
dbg_dump("accumulator", dev->xy_acc);
x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS,
dev->info->xfact, &x_z, &x_f);
y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
dev->info->yfact, &y_z, &y_f);
key = dev->data[dev->info->datalen - 1] & ATP_STATUS_BUTTON;
if (x && y) {
if (dev->x_old != -1) {
x = (dev->x_old * 3 + x) >> 2;
y = (dev->y_old * 3 + y) >> 2;
dev->x_old = x;
dev->y_old = y;
if (debug > 1)
printk(KERN_DEBUG "appletouch: X: %3d Y: %3d "
"Xz: %3d Yz: %3d\n",
x, y, x_z, y_z);
input_report_key(dev->input, BTN_TOUCH, 1);
input_report_abs(dev->input, ABS_X, x);
input_report_abs(dev->input, ABS_Y, y);
input_report_abs(dev->input, ABS_PRESSURE,
min(ATP_PRESSURE, x_z + y_z));
atp_report_fingers(dev->input, max(x_f, y_f));
}
dev->x_old = x;
dev->y_old = y;
} else if (!x && !y) {
dev->x_old = dev->y_old = -1;
input_report_key(dev->input, BTN_TOUCH, 0);
input_report_abs(dev->input, ABS_PRESSURE, 0);
atp_report_fingers(dev->input, 0);
/* reset the accumulator on release */
memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
}
input_report_key(dev->input, BTN_LEFT, key);
input_sync(dev->input);
/*
* Geysers 3/4 will continue to send packets continually after
* the first touch unless reinitialised. Do so if it's been
* idle for a while in order to avoid waking the kernel up
* several hundred times a second.
*/
/*
* Button must not be pressed when entering suspend,
* otherwise we will never release the button.
*/
if (!x && !y && !key) {
dev->idlecount++;
if (dev->idlecount == 10) {
dev->x_old = dev->y_old = -1;
dev->idlecount = 0;
schedule_work(&dev->work);
/* Don't resubmit urb here, wait for reinit */
return;
}
} else
dev->idlecount = 0;
exit:
retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
if (retval)
dev_err(&dev->intf->dev,
"atp_complete: usb_submit_urb failed with result %d\n",
retval);
}
static int atp_open(struct input_dev *input)
{
struct atp *dev = input_get_drvdata(input);
if (usb_submit_urb(dev->urb, GFP_ATOMIC))
return -EIO;
dev->open = 1;
return 0;
}
static void atp_close(struct input_dev *input)
{
struct atp *dev = input_get_drvdata(input);
usb_kill_urb(dev->urb);
cancel_work_sync(&dev->work);
dev->open = 0;
}
static int atp_handle_geyser(struct atp *dev)
{
if (dev->info != &fountain_info) {
/* switch to raw sensor mode */
if (atp_geyser_init(dev))
return -EIO;
dev_info(&dev->intf->dev, "Geyser mode initialized.\n");
}
return 0;
}
static int atp_probe(struct usb_interface *iface,
const struct usb_device_id *id)
{
struct atp *dev;
struct input_dev *input_dev;
struct usb_device *udev = interface_to_usbdev(iface);
struct usb_host_interface *iface_desc;
struct usb_endpoint_descriptor *endpoint;
int int_in_endpointAddr = 0;
int i, error = -ENOMEM;
const struct atp_info *info = (const struct atp_info *)id->driver_info;
/* set up the endpoint information */
/* use only the first interrupt-in endpoint */
iface_desc = iface->cur_altsetting;
for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
endpoint = &iface_desc->endpoint[i].desc;
if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
/* we found an interrupt in endpoint */
int_in_endpointAddr = endpoint->bEndpointAddress;
break;
}
}
if (!int_in_endpointAddr) {
dev_err(&iface->dev, "Could not find int-in endpoint\n");
return -EIO;
}
/* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
input_dev = input_allocate_device();
if (!dev || !input_dev) {
dev_err(&iface->dev, "Out of memory\n");
goto err_free_devs;
}
dev->udev = udev;
dev->intf = iface;
dev->input = input_dev;
dev->info = info;
dev->overflow_warned = false;
dev->urb = usb_alloc_urb(0, GFP_KERNEL);
if (!dev->urb)
goto err_free_devs;
dev->data = usb_alloc_coherent(dev->udev, dev->info->datalen, GFP_KERNEL,
&dev->urb->transfer_dma);
if (!dev->data)
goto err_free_urb;
usb_fill_int_urb(dev->urb, udev,
usb_rcvintpipe(udev, int_in_endpointAddr),
dev->data, dev->info->datalen,
dev->info->callback, dev, 1);
error = atp_handle_geyser(dev);
if (error)
goto err_free_buffer;
usb_make_path(udev, dev->phys, sizeof(dev->phys));
strlcat(dev->phys, "/input0", sizeof(dev->phys));
input_dev->name = "appletouch";
input_dev->phys = dev->phys;
usb_to_input_id(dev->udev, &input_dev->id);
input_dev->dev.parent = &iface->dev;
input_set_drvdata(input_dev, dev);
input_dev->open = atp_open;
input_dev->close = atp_close;
set_bit(EV_ABS, input_dev->evbit);
input_set_abs_params(input_dev, ABS_X, 0,
(dev->info->xsensors - 1) * dev->info->xfact - 1,
ATP_FUZZ, 0);
input_set_abs_params(input_dev, ABS_Y, 0,
(dev->info->ysensors - 1) * dev->info->yfact - 1,
ATP_FUZZ, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
set_bit(EV_KEY, input_dev->evbit);
set_bit(BTN_TOUCH, input_dev->keybit);
set_bit(BTN_TOOL_FINGER, input_dev->keybit);
set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
set_bit(BTN_LEFT, input_dev->keybit);
error = input_register_device(dev->input);
if (error)
goto err_free_buffer;
/* save our data pointer in this interface device */
usb_set_intfdata(iface, dev);
INIT_WORK(&dev->work, atp_reinit);
return 0;
err_free_buffer:
usb_free_coherent(dev->udev, dev->info->datalen,
dev->data, dev->urb->transfer_dma);
err_free_urb:
usb_free_urb(dev->urb);
err_free_devs:
usb_set_intfdata(iface, NULL);
kfree(dev);
input_free_device(input_dev);
return error;
}
static void atp_disconnect(struct usb_interface *iface)
{
struct atp *dev = usb_get_intfdata(iface);
usb_set_intfdata(iface, NULL);
if (dev) {
usb_kill_urb(dev->urb);
input_unregister_device(dev->input);
usb_free_coherent(dev->udev, dev->info->datalen,
dev->data, dev->urb->transfer_dma);
usb_free_urb(dev->urb);
kfree(dev);
}
dev_info(&iface->dev, "input: appletouch disconnected\n");
}
static int atp_recover(struct atp *dev)
{
int error;
error = atp_handle_geyser(dev);
if (error)
return error;
if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
return -EIO;
return 0;
}
static int atp_suspend(struct usb_interface *iface, pm_message_t message)
{
struct atp *dev = usb_get_intfdata(iface);
usb_kill_urb(dev->urb);
return 0;
}
static int atp_resume(struct usb_interface *iface)
{
struct atp *dev = usb_get_intfdata(iface);
if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
return -EIO;
return 0;
}
static int atp_reset_resume(struct usb_interface *iface)
{
struct atp *dev = usb_get_intfdata(iface);
return atp_recover(dev);
}
static struct usb_driver atp_driver = {
.name = "appletouch",
.probe = atp_probe,
.disconnect = atp_disconnect,
.suspend = atp_suspend,
.resume = atp_resume,
.reset_resume = atp_reset_resume,
.id_table = atp_table,
};
module_usb_driver(atp_driver);