1. 根目录:
2. drivers
3. net
4. usb
5. sr9800.h

/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
 *
 * Author : Liu Junliang <liujunliang_ljl@163.com>
 *
 * This file is licensed under the terms of the GNU General Public License
 * version 2.  This program is licensed "as is" without any warranty of any
 * kind, whether express or implied.
 */

#ifndef	_SR9800_H
#define	_SR9800_H

/* SR9800 spec. command table on Linux Platform */

/* command : Software Station Management Control Reg */
#define SR_CMD_SET_SW_MII		0x06
/* command : PHY Read Reg */
#define SR_CMD_READ_MII_REG		0x07
/* command : PHY Write Reg */
#define SR_CMD_WRITE_MII_REG		0x08
/* command : Hardware Station Management Control Reg */
#define SR_CMD_SET_HW_MII		0x0a
/* command : SROM Read Reg */
#define SR_CMD_READ_EEPROM		0x0b
/* command : SROM Write Reg */
#define SR_CMD_WRITE_EEPROM		0x0c
/* command : SROM Write Enable Reg */
#define SR_CMD_WRITE_ENABLE		0x0d
/* command : SROM Write Disable Reg */
#define SR_CMD_WRITE_DISABLE		0x0e
/* command : RX Control Read Reg */
#define SR_CMD_READ_RX_CTL		0x0f
#define		SR_RX_CTL_PRO			(1 << 0)
#define		SR_RX_CTL_AMALL			(1 << 1)
#define		SR_RX_CTL_SEP			(1 << 2)
#define		SR_RX_CTL_AB			(1 << 3)
#define		SR_RX_CTL_AM			(1 << 4)
#define		SR_RX_CTL_AP			(1 << 5)
#define		SR_RX_CTL_ARP			(1 << 6)
#define		SR_RX_CTL_SO			(1 << 7)
#define		SR_RX_CTL_RH1M			(1 << 8)
#define		SR_RX_CTL_RH2M			(1 << 9)
#define		SR_RX_CTL_RH3M			(1 << 10)
/* command : RX Control Write Reg */
#define SR_CMD_WRITE_RX_CTL		0x10
/* command : IPG0/IPG1/IPG2 Control Read Reg */
#define SR_CMD_READ_IPG012		0x11
/* command : IPG0/IPG1/IPG2 Control Write Reg */
#define SR_CMD_WRITE_IPG012		0x12
/* command : Node ID Read Reg */
#define SR_CMD_READ_NODE_ID		0x13
/* command : Node ID Write Reg */
#define SR_CMD_WRITE_NODE_ID		0x14
/* command : Multicast Filter Array Read Reg */
#define	SR_CMD_READ_MULTI_FILTER	0x15
/* command : Multicast Filter Array Write Reg */
#define SR_CMD_WRITE_MULTI_FILTER	0x16
/* command : Eth/HomePNA PHY Address Reg */
#define SR_CMD_READ_PHY_ID		0x19
/* command : Medium Status Read Reg */
#define SR_CMD_READ_MEDIUM_STATUS	0x1a
#define		SR_MONITOR_LINK			(1 << 1)
#define		SR_MONITOR_MAGIC		(1 << 2)
#define		SR_MONITOR_HSFS			(1 << 4)
/* command : Medium Status Write Reg */
#define SR_CMD_WRITE_MEDIUM_MODE	0x1b
#define		SR_MEDIUM_GM			(1 << 0)
#define		SR_MEDIUM_FD			(1 << 1)
#define		SR_MEDIUM_AC			(1 << 2)
#define		SR_MEDIUM_ENCK			(1 << 3)
#define		SR_MEDIUM_RFC			(1 << 4)
#define		SR_MEDIUM_TFC			(1 << 5)
#define		SR_MEDIUM_JFE			(1 << 6)
#define		SR_MEDIUM_PF			(1 << 7)
#define		SR_MEDIUM_RE			(1 << 8)
#define		SR_MEDIUM_PS			(1 << 9)
#define		SR_MEDIUM_RSV			(1 << 10)
#define		SR_MEDIUM_SBP			(1 << 11)
#define		SR_MEDIUM_SM			(1 << 12)
/* command : Monitor Mode Status Read Reg */
#define SR_CMD_READ_MONITOR_MODE	0x1c
/* command : Monitor Mode Status Write Reg */
#define SR_CMD_WRITE_MONITOR_MODE	0x1d
/* command : GPIO Status Read Reg */
#define SR_CMD_READ_GPIOS		0x1e
#define		SR_GPIO_GPO0EN		(1 << 0) /* GPIO0 Output enable */
#define		SR_GPIO_GPO_0		(1 << 1) /* GPIO0 Output value */
#define		SR_GPIO_GPO1EN		(1 << 2) /* GPIO1 Output enable */
#define		SR_GPIO_GPO_1		(1 << 3) /* GPIO1 Output value */
#define		SR_GPIO_GPO2EN		(1 << 4) /* GPIO2 Output enable */
#define		SR_GPIO_GPO_2		(1 << 5) /* GPIO2 Output value */
#define		SR_GPIO_RESERVED	(1 << 6) /* Reserved */
#define		SR_GPIO_RSE		(1 << 7) /* Reload serial EEPROM */
/* command : GPIO Status Write Reg */
#define SR_CMD_WRITE_GPIOS		0x1f
/* command : Eth PHY Power and Reset Control Reg */
#define SR_CMD_SW_RESET			0x20
#define		SR_SWRESET_CLEAR		0x00
#define		SR_SWRESET_RR			(1 << 0)
#define		SR_SWRESET_RT			(1 << 1)
#define		SR_SWRESET_PRTE			(1 << 2)
#define		SR_SWRESET_PRL			(1 << 3)
#define		SR_SWRESET_BZ			(1 << 4)
#define		SR_SWRESET_IPRL			(1 << 5)
#define		SR_SWRESET_IPPD			(1 << 6)
/* command : Software Interface Selection Status Read Reg */
#define SR_CMD_SW_PHY_STATUS		0x21
/* command : Software Interface Selection Status Write Reg */
#define SR_CMD_SW_PHY_SELECT		0x22
/* command : BULK in Buffer Size Reg */
#define	SR_CMD_BULKIN_SIZE		0x2A
/* command : LED_MUX Control Reg */
#define	SR_CMD_LED_MUX			0x70
#define		SR_LED_MUX_TX_ACTIVE		(1 << 0)
#define		SR_LED_MUX_RX_ACTIVE		(1 << 1)
#define		SR_LED_MUX_COLLISION		(1 << 2)
#define		SR_LED_MUX_DUP_COL		(1 << 3)
#define		SR_LED_MUX_DUP			(1 << 4)
#define		SR_LED_MUX_SPEED		(1 << 5)
#define		SR_LED_MUX_LINK_ACTIVE		(1 << 6)
#define		SR_LED_MUX_LINK			(1 << 7)

/* Register Access Flags */
#define SR_REQ_RD_REG   (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
#define SR_REQ_WR_REG   (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)

/* Multicast Filter Array size & Max Number */
#define	SR_MCAST_FILTER_SIZE		8
#define	SR_MAX_MCAST			64

/* IPG0/1/2 Default Value */
#define	SR9800_IPG0_DEFAULT		0x15
#define	SR9800_IPG1_DEFAULT		0x0c
#define	SR9800_IPG2_DEFAULT		0x12

/* Medium Status Default Mode */
#define SR9800_MEDIUM_DEFAULT	\
	(SR_MEDIUM_FD | SR_MEDIUM_RFC | \
	 SR_MEDIUM_TFC | SR_MEDIUM_PS | \
	 SR_MEDIUM_AC | SR_MEDIUM_RE)

/* RX Control Default Setting */
#define SR_DEFAULT_RX_CTL	\
	(SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M)

/* EEPROM Magic Number & EEPROM Size */
#define SR_EEPROM_MAGIC			0xdeadbeef
#define SR9800_EEPROM_LEN		0xff

/* SR9800 Driver Version and Driver Name */
#define DRIVER_VERSION			"11-Nov-2013"
#define DRIVER_NAME			"CoreChips"
#define	DRIVER_FLAG		\
	(FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |  FLAG_MULTI_PACKET)

/* SR9800 BULKIN Buffer Size */
#define SR9800_MAX_BULKIN_2K		0
#define SR9800_MAX_BULKIN_4K		1
#define SR9800_MAX_BULKIN_6K		2
#define SR9800_MAX_BULKIN_8K		3
#define SR9800_MAX_BULKIN_16K		4
#define SR9800_MAX_BULKIN_20K		5
#define SR9800_MAX_BULKIN_24K		6
#define SR9800_MAX_BULKIN_32K		7

struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = {
	/* 2k */
	{2048, 0x8000, 0x8001},
	/* 4k */
	{4096, 0x8100, 0x8147},
	/* 6k */
	{6144, 0x8200, 0x81EB},
	/* 8k */
	{8192, 0x8300, 0x83D7},
	/* 16 */
	{16384, 0x8400, 0x851E},
	/* 20k */
	{20480, 0x8500, 0x8666},
	/* 24k */
	{24576, 0x8600, 0x87AE},
	/* 32k */
	{32768, 0x8700, 0x8A3D},
};

/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
struct sr_data {
	u8 multi_filter[SR_MCAST_FILTER_SIZE];
	u8 mac_addr[ETH_ALEN];
	u8 phymode;
	u8 ledmode;
	u8 eeprom_len;
};

struct sr9800_int_data {
	__le16 res1;
	u8 link;
	__le16 res2;
	u8 status;
	__le16 res3;
} __packed;

#endif	/* _SR9800_H */
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202