- 根目录:
- drivers
- staging
- dgnc
- dgnc_driver.h
/*
* Copyright 2003 Digi International (www.digi.com)
* Scott H Kilau <Scott_Kilau at digi dot com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the
* implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!!
*
*************************************************************************
*
* Driver includes
*
*************************************************************************/
#ifndef __DGNC_DRIVER_H
#define __DGNC_DRIVER_H
#include <linux/types.h> /* To pick up the varions Linux types */
#include <linux/tty.h> /* To pick up the various tty structs/defines */
#include <linux/interrupt.h> /* For irqreturn_t type */
#include "dgnc_types.h" /* Additional types needed by the Digi header files */
#include "digi.h" /* Digi specific ioctl header */
#include "dgnc_kcompat.h" /* Kernel 2.4/2.6 compat includes */
#include "dgnc_sysfs.h" /* Support for SYSFS */
/*************************************************************************
*
* Driver defines
*
*************************************************************************/
/*
* Driver identification, error and debugging statments
*
* In theory, you can change all occurrences of "digi" in the next
* three lines, and the driver printk's will all automagically change.
*
* APR((fmt, args, ...)); Always prints message
* DPR((fmt, args, ...)); Only prints if DGNC_TRACER is defined at
* compile time and dgnc_debug!=0
*/
#define PROCSTR "dgnc" /* /proc entries */
#define DEVSTR "/dev/dg/dgnc" /* /dev entries */
#define DRVSTR "dgnc" /* Driver name string
* displayed by APR */
#define APR(args) do { PRINTF_TO_KMEM(args); printk(DRVSTR": "); printk args; \
} while (0)
#define RAPR(args) do { PRINTF_TO_KMEM(args); printk args; } while (0)
#define TRC_TO_CONSOLE 1
/*
* Debugging levels can be set using debug insmod variable
* They can also be compiled out completely.
*/
#define DBG_INIT (dgnc_debug & 0x01)
#define DBG_BASIC (dgnc_debug & 0x02)
#define DBG_CORE (dgnc_debug & 0x04)
#define DBG_OPEN (dgnc_debug & 0x08)
#define DBG_CLOSE (dgnc_debug & 0x10)
#define DBG_READ (dgnc_debug & 0x20)
#define DBG_WRITE (dgnc_debug & 0x40)
#define DBG_IOCTL (dgnc_debug & 0x80)
#define DBG_PROC (dgnc_debug & 0x100)
#define DBG_PARAM (dgnc_debug & 0x200)
#define DBG_PSCAN (dgnc_debug & 0x400)
#define DBG_EVENT (dgnc_debug & 0x800)
#define DBG_DRAIN (dgnc_debug & 0x1000)
#define DBG_MSIGS (dgnc_debug & 0x2000)
#define DBG_MGMT (dgnc_debug & 0x4000)
#define DBG_INTR (dgnc_debug & 0x8000)
#define DBG_CARR (dgnc_debug & 0x10000)
#if defined(DGNC_TRACER)
# if defined(TRC_TO_KMEM)
/* Choose one: */
# define TRC_ON_OVERFLOW_WRAP_AROUND
# undef TRC_ON_OVERFLOW_SHIFT_BUFFER
# endif //TRC_TO_KMEM
# define TRC_MAXMSG 1024
# define TRC_OVERFLOW "(OVERFLOW)"
# define TRC_DTRC "/usr/bin/dtrc"
#if defined TRC_TO_CONSOLE
#define PRINTF_TO_CONSOLE(args) { printk(DRVSTR": "); printk args; }
#else //!defined TRACE_TO_CONSOLE
#define PRINTF_TO_CONSOLE(args)
#endif
#if defined TRC_TO_KMEM
#define PRINTF_TO_KMEM(args) dgnc_tracef args
#else //!defined TRC_TO_KMEM
#define PRINTF_TO_KMEM(args)
#endif
#define TRC(args) { PRINTF_TO_KMEM(args); PRINTF_TO_CONSOLE(args) }
# define DPR_INIT(ARGS) if (DBG_INIT) TRC(ARGS)
# define DPR_BASIC(ARGS) if (DBG_BASIC) TRC(ARGS)
# define DPR_CORE(ARGS) if (DBG_CORE) TRC(ARGS)
# define DPR_OPEN(ARGS) if (DBG_OPEN) TRC(ARGS)
# define DPR_CLOSE(ARGS) if (DBG_CLOSE) TRC(ARGS)
# define DPR_READ(ARGS) if (DBG_READ) TRC(ARGS)
# define DPR_WRITE(ARGS) if (DBG_WRITE) TRC(ARGS)
# define DPR_IOCTL(ARGS) if (DBG_IOCTL) TRC(ARGS)
# define DPR_PROC(ARGS) if (DBG_PROC) TRC(ARGS)
# define DPR_PARAM(ARGS) if (DBG_PARAM) TRC(ARGS)
# define DPR_PSCAN(ARGS) if (DBG_PSCAN) TRC(ARGS)
# define DPR_EVENT(ARGS) if (DBG_EVENT) TRC(ARGS)
# define DPR_DRAIN(ARGS) if (DBG_DRAIN) TRC(ARGS)
# define DPR_CARR(ARGS) if (DBG_CARR) TRC(ARGS)
# define DPR_MGMT(ARGS) if (DBG_MGMT) TRC(ARGS)
# define DPR_INTR(ARGS) if (DBG_INTR) TRC(ARGS)
# define DPR_MSIGS(ARGS) if (DBG_MSIGS) TRC(ARGS)
# define DPR(ARGS) if (dgnc_debug) TRC(ARGS)
# define P(X) dgnc_tracef(#X "=%p\n", X)
# define X(X) dgnc_tracef(#X "=%x\n", X)
#else//!defined DGNC_TRACER
#define PRINTF_TO_KMEM(args)
# define TRC(ARGS)
# define DPR_INIT(ARGS)
# define DPR_BASIC(ARGS)
# define DPR_CORE(ARGS)
# define DPR_OPEN(ARGS)
# define DPR_CLOSE(ARGS)
# define DPR_READ(ARGS)
# define DPR_WRITE(ARGS)
# define DPR_IOCTL(ARGS)
# define DPR_PROC(ARGS)
# define DPR_PARAM(ARGS)
# define DPR_PSCAN(ARGS)
# define DPR_EVENT(ARGS)
# define DPR_DRAIN(ARGS)
# define DPR_CARR(ARGS)
# define DPR_MGMT(ARGS)
# define DPR_INTR(ARGS)
# define DPR_MSIGS(ARGS)
# define DPR(args)
#endif//DGNC_TRACER
/* Number of boards we support at once. */
#define MAXBOARDS 20
#define MAXPORTS 8
#define MAXTTYNAMELEN 200
/* Our 3 magic numbers for our board, channel and unit structs */
#define DGNC_BOARD_MAGIC 0x5c6df104
#define DGNC_CHANNEL_MAGIC 0x6c6df104
#define DGNC_UNIT_MAGIC 0x7c6df104
/* Serial port types */
#define DGNC_SERIAL 0
#define DGNC_PRINT 1
#define SERIAL_TYPE_NORMAL 1
#define PORT_NUM(dev) ((dev) & 0x7f)
#define IS_PRINT(dev) (((dev) & 0xff) >= 0x80)
/* MAX number of stop characters we will send when our read queue is getting full */
#define MAX_STOPS_SENT 5
/* 4 extra for alignment play space */
#define WRITEBUFLEN ((4096) + 4)
#define MYFLIPLEN N_TTY_BUF_SIZE
#define dgnc_jiffies_from_ms(a) (((a) * HZ) / 1000)
/*
* Define a local default termios struct. All ports will be created
* with this termios initially. This is the same structure that is defined
* as the default in tty_io.c with the same settings overriden as in serial.c
*
* In short, this should match the internal serial ports' defaults.
*/
#define DEFAULT_IFLAGS (ICRNL | IXON)
#define DEFAULT_OFLAGS (OPOST | ONLCR)
#define DEFAULT_CFLAGS (B9600 | CS8 | CREAD | HUPCL | CLOCAL)
#define DEFAULT_LFLAGS (ISIG | ICANON | ECHO | ECHOE | ECHOK | \
ECHOCTL | ECHOKE | IEXTEN)
#ifndef _POSIX_VDISABLE
#define _POSIX_VDISABLE '\0'
#endif
#define SNIFF_MAX 65536 /* Sniff buffer size (2^n) */
#define SNIFF_MASK (SNIFF_MAX - 1) /* Sniff wrap mask */
/*
* Lock function/defines.
* Makes spotting lock/unlock locations easier.
*/
# define DGNC_SPINLOCK_INIT(x) spin_lock_init(&(x))
# define DGNC_LOCK(x,y) spin_lock_irqsave(&(x), y)
# define DGNC_UNLOCK(x,y) spin_unlock_irqrestore(&(x), y)
/*
* All the possible states the driver can be while being loaded.
*/
enum {
DRIVER_INITIALIZED = 0,
DRIVER_READY
};
/*
* All the possible states the board can be while booting up.
*/
enum {
BOARD_FAILED = 0,
BOARD_FOUND,
BOARD_READY
};
/*************************************************************************
*
* Structures and closely related defines.
*
*************************************************************************/
struct dgnc_board;
struct channel_t;
/************************************************************************
* Per board operations structure *
************************************************************************/
struct board_ops {
void (*tasklet) (unsigned long data);
irqreturn_t (*intr) (int irq, void *voidbrd);
void (*uart_init) (struct channel_t *ch);
void (*uart_off) (struct channel_t *ch);
int (*drain) (struct tty_struct *tty, uint seconds);
void (*param) (struct tty_struct *tty);
void (*vpd) (struct dgnc_board *brd);
void (*assert_modem_signals) (struct channel_t *ch);
void (*flush_uart_write) (struct channel_t *ch);
void (*flush_uart_read) (struct channel_t *ch);
void (*disable_receiver) (struct channel_t *ch);
void (*enable_receiver) (struct channel_t *ch);
void (*send_break) (struct channel_t *ch, int);
void (*send_start_character) (struct channel_t *ch);
void (*send_stop_character) (struct channel_t *ch);
void (*copy_data_from_queue_to_uart) (struct channel_t *ch);
uint (*get_uart_bytes_left) (struct channel_t *ch);
void (*send_immediate_char) (struct channel_t *ch, unsigned char);
};
/************************************************************************
* Device flag definitions for bd_flags.
************************************************************************/
#define BD_IS_PCI_EXPRESS 0x0001 /* Is a PCI Express board */
/*
* Per-board information
*/
struct dgnc_board {
int magic; /* Board Magic number. */
int boardnum; /* Board number: 0-32 */
int type; /* Type of board */
char *name; /* Product Name */
struct pci_dev *pdev; /* Pointer to the pci_dev struct */
unsigned long bd_flags; /* Board flags */
u16 vendor; /* PCI vendor ID */
u16 device; /* PCI device ID */
u16 subvendor; /* PCI subsystem vendor ID */
u16 subdevice; /* PCI subsystem device ID */
uchar rev; /* PCI revision ID */
uint pci_bus; /* PCI bus value */
uint pci_slot; /* PCI slot value */
uint maxports; /* MAX ports this board can handle */
uchar dvid; /* Board specific device id */
uchar vpd[128]; /* VPD of board, if found */
uchar serial_num[20]; /* Serial number of board, if found in VPD */
spinlock_t bd_lock; /* Used to protect board */
spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
* the interrupt routine from each other.
*/
uint state; /* State of card. */
wait_queue_head_t state_wait; /* Place to sleep on for state change */
struct tasklet_struct helper_tasklet; /* Poll helper tasklet */
uint nasync; /* Number of ports on card */
uint irq; /* Interrupt request number */
ulong intr_count; /* Count of interrupts */
ulong intr_modem; /* Count of interrupts */
ulong intr_tx; /* Count of interrupts */
ulong intr_rx; /* Count of interrupts */
ulong membase; /* Start of base memory of the card */
ulong membase_end; /* End of base memory of the card */
u8 __iomem *re_map_membase;/* Remapped memory of the card */
ulong iobase; /* Start of io base of the card */
ulong iobase_end; /* End of io base of the card */
uint bd_uart_offset; /* Space between each UART */
struct channel_t *channels[MAXPORTS]; /* array of pointers to our channels. */
struct tty_driver SerialDriver;
char SerialName[200];
struct tty_driver PrintDriver;
char PrintName[200];
uint dgnc_Major_Serial_Registered;
uint dgnc_Major_TransparentPrint_Registered;
uint dgnc_Serial_Major;
uint dgnc_TransparentPrint_Major;
uint TtyRefCnt;
char *flipbuf; /* Our flip buffer, alloced if board is found */
u16 dpatype; /* The board "type", as defined by DPA */
u16 dpastatus; /* The board "status", as defined by DPA */
/*
* Mgmt data.
*/
char *msgbuf_head;
char *msgbuf;
uint bd_dividend; /* Board/UARTs specific dividend */
struct board_ops *bd_ops;
/* /proc/<board> entries */
struct proc_dir_entry *proc_entry_pointer;
struct dgnc_proc_entry *dgnc_board_table;
};
/************************************************************************
* Unit flag definitions for un_flags.
************************************************************************/
#define UN_ISOPEN 0x0001 /* Device is open */
#define UN_CLOSING 0x0002 /* Line is being closed */
#define UN_IMM 0x0004 /* Service immediately */
#define UN_BUSY 0x0008 /* Some work this channel */
#define UN_BREAKI 0x0010 /* Input break received */
#define UN_PWAIT 0x0020 /* Printer waiting for terminal */
#define UN_TIME 0x0040 /* Waiting on time */
#define UN_EMPTY 0x0080 /* Waiting output queue empty */
#define UN_LOW 0x0100 /* Waiting output low water mark*/
#define UN_EXCL_OPEN 0x0200 /* Open for exclusive use */
#define UN_WOPEN 0x0400 /* Device waiting for open */
#define UN_WIOCTL 0x0800 /* Device waiting for open */
#define UN_HANGUP 0x8000 /* Carrier lost */
struct device;
/************************************************************************
* Structure for terminal or printer unit.
************************************************************************/
struct un_t {
int magic; /* Unit Magic Number. */
struct channel_t *un_ch;
ulong un_time;
uint un_type;
uint un_open_count; /* Counter of opens to port */
struct tty_struct *un_tty;/* Pointer to unit tty structure */
uint un_flags; /* Unit flags */
wait_queue_head_t un_flags_wait; /* Place to sleep to wait on unit */
uint un_dev; /* Minor device number */
struct device *un_sysfs;
};
/************************************************************************
* Device flag definitions for ch_flags.
************************************************************************/
#define CH_PRON 0x0001 /* Printer on string */
#define CH_STOP 0x0002 /* Output is stopped */
#define CH_STOPI 0x0004 /* Input is stopped */
#define CH_CD 0x0008 /* Carrier is present */
#define CH_FCAR 0x0010 /* Carrier forced on */
#define CH_HANGUP 0x0020 /* Hangup received */
#define CH_RECEIVER_OFF 0x0040 /* Receiver is off */
#define CH_OPENING 0x0080 /* Port in fragile open state */
#define CH_CLOSING 0x0100 /* Port in fragile close state */
#define CH_FIFO_ENABLED 0x0200 /* Port has FIFOs enabled */
#define CH_TX_FIFO_EMPTY 0x0400 /* TX Fifo is completely empty */
#define CH_TX_FIFO_LWM 0x0800 /* TX Fifo is below Low Water */
#define CH_BREAK_SENDING 0x1000 /* Break is being sent */
#define CH_LOOPBACK 0x2000 /* Channel is in lookback mode */
#define CH_FLIPBUF_IN_USE 0x4000 /* Channel's flipbuf is in use */
#define CH_BAUD0 0x08000 /* Used for checking B0 transitions */
#define CH_FORCED_STOP 0x20000 /* Output is forcibly stopped */
#define CH_FORCED_STOPI 0x40000 /* Input is forcibly stopped */
/*
* Definitions for ch_sniff_flags
*/
#define SNIFF_OPEN 0x1
#define SNIFF_WAIT_DATA 0x2
#define SNIFF_WAIT_SPACE 0x4
/* Our Read/Error/Write queue sizes */
#define RQUEUEMASK 0x1FFF /* 8 K - 1 */
#define EQUEUEMASK 0x1FFF /* 8 K - 1 */
#define WQUEUEMASK 0x0FFF /* 4 K - 1 */
#define RQUEUESIZE (RQUEUEMASK + 1)
#define EQUEUESIZE RQUEUESIZE
#define WQUEUESIZE (WQUEUEMASK + 1)
/************************************************************************
* Channel information structure.
************************************************************************/
struct channel_t {
int magic; /* Channel Magic Number */
struct dgnc_board *ch_bd; /* Board structure pointer */
struct digi_t ch_digi; /* Transparent Print structure */
struct un_t ch_tun; /* Terminal unit info */
struct un_t ch_pun; /* Printer unit info */
spinlock_t ch_lock; /* provide for serialization */
wait_queue_head_t ch_flags_wait;
uint ch_portnum; /* Port number, 0 offset. */
uint ch_open_count; /* open count */
uint ch_flags; /* Channel flags */
ulong ch_close_delay; /* How long we should drop RTS/DTR for */
ulong ch_cpstime; /* Time for CPS calculations */
tcflag_t ch_c_iflag; /* channel iflags */
tcflag_t ch_c_cflag; /* channel cflags */
tcflag_t ch_c_oflag; /* channel oflags */
tcflag_t ch_c_lflag; /* channel lflags */
uchar ch_stopc; /* Stop character */
uchar ch_startc; /* Start character */
uint ch_old_baud; /* Cache of the current baud */
uint ch_custom_speed;/* Custom baud, if set */
uint ch_wopen; /* Waiting for open process cnt */
uchar ch_mostat; /* FEP output modem status */
uchar ch_mistat; /* FEP input modem status */
struct neo_uart_struct __iomem *ch_neo_uart; /* Pointer to the "mapped" UART struct */
struct cls_uart_struct __iomem *ch_cls_uart; /* Pointer to the "mapped" UART struct */
uchar ch_cached_lsr; /* Cached value of the LSR register */
uchar *ch_rqueue; /* Our read queue buffer - malloc'ed */
ushort ch_r_head; /* Head location of the read queue */
ushort ch_r_tail; /* Tail location of the read queue */
uchar *ch_equeue; /* Our error queue buffer - malloc'ed */
ushort ch_e_head; /* Head location of the error queue */
ushort ch_e_tail; /* Tail location of the error queue */
uchar *ch_wqueue; /* Our write queue buffer - malloc'ed */
ushort ch_w_head; /* Head location of the write queue */
ushort ch_w_tail; /* Tail location of the write queue */
ulong ch_rxcount; /* total of data received so far */
ulong ch_txcount; /* total of data transmitted so far */
uchar ch_r_tlevel; /* Receive Trigger level */
uchar ch_t_tlevel; /* Transmit Trigger level */
uchar ch_r_watermark; /* Receive Watermark */
ulong ch_stop_sending_break; /* Time we should STOP sending a break */
uint ch_stops_sent; /* How many times I have sent a stop character
* to try to stop the other guy sending.
*/
ulong ch_err_parity; /* Count of parity errors on channel */
ulong ch_err_frame; /* Count of framing errors on channel */
ulong ch_err_break; /* Count of breaks on channel */
ulong ch_err_overrun; /* Count of overruns on channel */
ulong ch_xon_sends; /* Count of xons transmitted */
ulong ch_xoff_sends; /* Count of xoffs transmitted */
ulong ch_intr_modem; /* Count of interrupts */
ulong ch_intr_tx; /* Count of interrupts */
ulong ch_intr_rx; /* Count of interrupts */
/* /proc/<board>/<channel> entries */
struct proc_dir_entry *proc_entry_pointer;
struct dgnc_proc_entry *dgnc_channel_table;
uint ch_sniff_in;
uint ch_sniff_out;
char *ch_sniff_buf; /* Sniff buffer for proc */
ulong ch_sniff_flags; /* Channel flags */
wait_queue_head_t ch_sniff_wait;
};
/*************************************************************************
*
* Prototypes for non-static functions used in more than one module
*
*************************************************************************/
extern int dgnc_ms_sleep(ulong ms);
extern char *dgnc_ioctl_name(int cmd);
/*
* Our Global Variables.
*/
extern int dgnc_driver_state; /* The state of the driver */
extern uint dgnc_Major; /* Our driver/mgmt major */
extern int dgnc_debug; /* Debug variable */
extern int dgnc_rawreadok; /* Set if user wants rawreads */
extern int dgnc_poll_tick; /* Poll interval - 20 ms */
extern int dgnc_trcbuf_size; /* Size of the ringbuffer */
extern spinlock_t dgnc_global_lock; /* Driver global spinlock */
extern uint dgnc_NumBoards; /* Total number of boards */
extern struct dgnc_board *dgnc_Board[MAXBOARDS]; /* Array of board structs */
extern ulong dgnc_poll_counter; /* Times the poller has run */
extern char *dgnc_state_text[]; /* Array of state text */
extern char *dgnc_driver_state_text[];/* Array of driver state text */
#endif