- 根目录:
- drivers
- staging
- winbond
- wb35reg_s.h
#ifndef __WINBOND_WB35REG_S_H
#define __WINBOND_WB35REG_S_H
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/atomic.h>
struct hw_data;
/* =========================================================================
*
* HAL setting function
*
* ========================================
* |Uxx| |Dxx| |Mxx| |BB| |RF|
* ========================================
* | |
* Wb35Reg_Read Wb35Reg_Write
*
* ----------------------------------------
* WbUsb_CallUSBDASync supplied By WbUsb module
* ==========================================================================
*/
#define GetBit(dwData, i) (dwData & (0x00000001 << i))
#define SetBit(dwData, i) (dwData | (0x00000001 << i))
#define ClearBit(dwData, i) (dwData & ~(0x00000001 << i))
#define IGNORE_INCREMENT 0
#define AUTO_INCREMENT 0
#define NO_INCREMENT 1
#define REG_DIRECTION(_x, _y) ((_y)->DIRECT == 0 ? usb_rcvctrlpipe(_x, 0) : usb_sndctrlpipe(_x, 0))
#define REG_BUF_SIZE(_x) ((_x)->bRequest == 0x04 ? cpu_to_le16((_x)->wLength) : 4)
#define BB48_DEFAULT_AL2230_11B 0x0033447c
#define BB4C_DEFAULT_AL2230_11B 0x0A00FEFF
#define BB48_DEFAULT_AL2230_11G 0x00332C1B
#define BB4C_DEFAULT_AL2230_11G 0x0A00FEFF
#define BB48_DEFAULT_WB242_11B 0x00292315 /* backoff 2dB */
#define BB4C_DEFAULT_WB242_11B 0x0800FEFF /* backoff 2dB */
#define BB48_DEFAULT_WB242_11G 0x00453B24
#define BB4C_DEFAULT_WB242_11G 0x0E00FEFF
/*
* ====================================
* Default setting for Mxx
* ====================================
*/
#define DEFAULT_CWMIN 31 /* (M2C) CWmin. Its value is in the range 0-31. */
#define DEFAULT_CWMAX 1023 /* (M2C) CWmax. Its value is in the range 0-1023. */
#define DEFAULT_AID 1 /* (M34) AID. Its value is in the range 1-2007. */
#define DEFAULT_RATE_RETRY_LIMIT 2 /* (M38) as named */
#define DEFAULT_LONG_RETRY_LIMIT 7 /* (M38) LongRetryLimit. Its value is in the range 0-15. */
#define DEFAULT_SHORT_RETRY_LIMIT 7 /* (M38) ShortRetryLimit. Its value is in the range 0-15. */
#define DEFAULT_PIFST 25 /* (M3C) PIFS Time. Its value is in the range 0-65535. */
#define DEFAULT_EIFST 354 /* (M3C) EIFS Time. Its value is in the range 0-1048575. */
#define DEFAULT_DIFST 45 /* (M3C) DIFS Time. Its value is in the range 0-65535. */
#define DEFAULT_SIFST 5 /* (M3C) SIFS Time. Its value is in the range 0-65535. */
#define DEFAULT_OSIFST 10 /* (M3C) Original SIFS Time. Its value is in the range 0-15. */
#define DEFAULT_ATIMWD 0 /* (M40) ATIM Window. Its value is in the range 0-65535. */
#define DEFAULT_SLOT_TIME 20 /* (M40) ($) SlotTime. Its value is in the range 0-255. */
#define DEFAULT_MAX_TX_MSDU_LIFE_TIME 512 /* (M44) MaxTxMSDULifeTime. Its value is in the range 0-4294967295. */
#define DEFAULT_BEACON_INTERVAL 500 /* (M48) Beacon Interval. Its value is in the range 0-65535. */
#define DEFAULT_PROBE_DELAY_TIME 200 /* (M48) Probe Delay Time. Its value is in the range 0-65535. */
#define DEFAULT_PROTOCOL_VERSION 0 /* (M4C) */
#define DEFAULT_MAC_POWER_STATE 2 /* (M4C) 2: MAC at power active */
#define DEFAULT_DTIM_ALERT_TIME 0
struct wb35_reg_queue {
struct urb *urb;
void *pUsbReq;
void *Next;
union {
u32 VALUE;
u32 *pBuffer;
};
u8 RESERVED[4]; /* space reserved for communication */
u16 INDEX; /* For storing the register index */
u8 RESERVED_VALID; /* Indicate whether the RESERVED space is valid at this command. */
u8 DIRECT; /* 0:In 1:Out */
};
/*
* ====================================
* Internal variable for module
* ====================================
*/
#define MAX_SQ3_FILTER_SIZE 5
struct wb35_reg {
/*
* ============================
* Register Bank backup
* ============================
*/
u32 U1B0; /* bit16 record the h/w radio on/off status */
u32 U1BC_LEDConfigure;
u32 D00_DmaControl;
u32 M00_MacControl;
union {
struct {
u32 M04_MulticastAddress1;
u32 M08_MulticastAddress2;
};
u8 Multicast[8]; /* contents of card multicast registers */
};
u32 M24_MacControl;
u32 M28_MacControl;
u32 M2C_MacControl;
u32 M38_MacControl;
u32 M3C_MacControl;
u32 M40_MacControl;
u32 M44_MacControl;
u32 M48_MacControl;
u32 M4C_MacStatus;
u32 M60_MacControl;
u32 M68_MacControl;
u32 M70_MacControl;
u32 M74_MacControl;
u32 M78_ERPInformation;
u32 M7C_MacControl;
u32 M80_MacControl;
u32 M84_MacControl;
u32 M88_MacControl;
u32 M98_MacControl;
/* Baseband register */
u32 BB0C; /* Used for LNA calculation */
u32 BB2C;
u32 BB30; /* 11b acquisition control register */
u32 BB3C;
u32 BB48;
u32 BB4C;
u32 BB50; /* mode control register */
u32 BB54;
u32 BB58; /* IQ_ALPHA */
u32 BB5C; /* For test */
u32 BB60; /* for WTO read value */
/* VM */
spinlock_t EP0VM_spin_lock; /* 4B */
u32 EP0VM_status; /* $$ */
struct wb35_reg_queue *reg_first;
struct wb35_reg_queue *reg_last;
atomic_t RegFireCount;
/* Hardware status */
u8 EP0vm_state;
u8 mac_power_save;
u8 EEPROMPhyType; /*
* 0 ~ 15 for Maxim (0 ĄV MAX2825, 1 ĄV MAX2827, 2 ĄV MAX2828, 3 ĄV MAX2829),
* 16 ~ 31 for Airoha (16 ĄV AL2230, 11 - AL7230)
* 32 ~ Reserved
* 33 ~ 47 For WB242 ( 33 - WB242, 34 - WB242 with new Txvga 0.5 db step)
* 48 ~ 255 ARE RESERVED.
*/
u8 EEPROMRegion; /* Region setting in EEPROM */
u32 SyncIoPause; /* If user use the Sync Io to access Hw, then pause the async access */
u8 LNAValue[4]; /* Table for speed up running */
u32 SQ3_filter[MAX_SQ3_FILTER_SIZE];
u32 SQ3_index;
};
/* =====================================================================
* Function declaration
* =====================================================================
*/
void hal_remove_mapping_key(struct hw_data *hw_data, u8 *mac_addr);
void hal_remove_default_key(struct hw_data *hw_data, u32 index);
unsigned char hal_set_mapping_key(struct hw_data *adapter, u8 *mac_addr,
u8 null_key, u8 wep_on, u8 *tx_tsc,
u8 *rx_tsc, u8 key_type, u8 key_len,
u8 *key_data);
unsigned char hal_set_default_key(struct hw_data *adapter, u8 index,
u8 null_key, u8 wep_on, u8 *tx_tsc,
u8 *rx_tsc, u8 key_type, u8 key_len,
u8 *key_data);
void hal_clear_all_default_key(struct hw_data *hw_data);
void hal_clear_all_group_key(struct hw_data *hw_data);
void hal_clear_all_mapping_key(struct hw_data *hw_data);
void hal_clear_all_key(struct hw_data *hw_data);
void hal_set_power_save_mode(struct hw_data *hw_data, unsigned char power_save,
unsigned char wakeup, unsigned char dtim);
void hal_get_power_save_mode(struct hw_data *hw_data, u8 *in_pwr_save);
void hal_set_slot_time(struct hw_data *hw_data, u8 type);
#define hal_set_atim_window(_A, _ATM)
void hal_start_bss(struct hw_data *hw_data, u8 mac_op_mode);
/* 0:BSS STA 1:IBSS STA */
void hal_join_request(struct hw_data *hw_data, u8 bss_type);
void hal_stop_sync_bss(struct hw_data *hw_data);
void hal_resume_sync_bss(struct hw_data *hw_data);
void hal_set_aid(struct hw_data *hw_data, u16 aid);
void hal_set_bssid(struct hw_data *hw_data, u8 *bssid);
void hal_get_bssid(struct hw_data *hw_data, u8 *bssid);
void hal_set_listen_interval(struct hw_data *hw_data, u16 listen_interval);
void hal_set_cap_info(struct hw_data *hw_data, u16 capability_info);
void hal_set_ssid(struct hw_data *hw_data, u8 *ssid, u8 ssid_len);
void hal_start_tx0(struct hw_data *hw_data);
#define hal_get_cwmin(_A) ((_A)->cwmin)
void hal_set_cwmax(struct hw_data *hw_data, u16 cwin_max);
#define hal_get_cwmax(_A) ((_A)->cwmax)
void hal_set_rsn_wpa(struct hw_data *hw_data, u32 *rsn_ie_bitmap,
u32 *rsn_oui_type , unsigned char desired_auth_mode);
void hal_set_connect_info(struct hw_data *hw_data, unsigned char bo_connect);
u8 hal_get_est_sq3(struct hw_data *hw_data, u8 count);
void hal_descriptor_indicate(struct hw_data *hw_data,
struct wb35_descriptor *des);
u8 hal_get_antenna_number(struct hw_data *hw_data);
u32 hal_get_bss_pk_cnt(struct hw_data *hw_data);
#define hal_get_region_from_EEPROM(_A) ((_A)->reg.EEPROMRegion)
#define hal_get_tx_buffer(_A, _B) Wb35Tx_get_tx_buffer(_A, _B)
#define hal_software_set(_A) (_A->SoftwareSet)
#define hal_driver_init_OK(_A) (_A->IsInitOK)
#define hal_rssi_boundary_high(_A) (_A->RSSI_high)
#define hal_rssi_boundary_low(_A) (_A->RSSI_low)
#define hal_scan_interval(_A) (_A->Scan_Interval)
#define PHY_DEBUG(msg, args...)
/* return 100ms count */
#define hal_get_time_count(_P) (_P->time_count / 10)
#define hal_ibss_disconnect(_A) (hal_stop_sync_bss(_A))
#endif