- 根目录:
- drivers
- target
- iscsi
- iscsi_target_erl0.c
/******************************************************************************
* This file contains error recovery level zero functions used by
* the iSCSI Target driver.
*
* (c) Copyright 2007-2013 Datera, Inc.
*
* Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
******************************************************************************/
#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
#include "iscsi_target_core.h"
#include "iscsi_target_seq_pdu_list.h"
#include "iscsi_target_tq.h"
#include "iscsi_target_erl0.h"
#include "iscsi_target_erl1.h"
#include "iscsi_target_erl2.h"
#include "iscsi_target_util.h"
#include "iscsi_target.h"
/*
* Used to set values in struct iscsi_cmd that iscsit_dataout_check_sequence()
* checks against to determine a PDU's Offset+Length is within the current
* DataOUT Sequence. Used for DataSequenceInOrder=Yes only.
*/
void iscsit_set_dataout_sequence_values(
struct iscsi_cmd *cmd)
{
struct iscsi_conn *conn = cmd->conn;
/*
* Still set seq_start_offset and seq_end_offset for Unsolicited
* DataOUT, even if DataSequenceInOrder=No.
*/
if (cmd->unsolicited_data) {
cmd->seq_start_offset = cmd->write_data_done;
cmd->seq_end_offset = (cmd->write_data_done +
((cmd->se_cmd.data_length >
conn->sess->sess_ops->FirstBurstLength) ?
conn->sess->sess_ops->FirstBurstLength : cmd->se_cmd.data_length));
return;
}
if (!conn->sess->sess_ops->DataSequenceInOrder)
return;
if (!cmd->seq_start_offset && !cmd->seq_end_offset) {
cmd->seq_start_offset = cmd->write_data_done;
cmd->seq_end_offset = (cmd->se_cmd.data_length >
conn->sess->sess_ops->MaxBurstLength) ?
(cmd->write_data_done +
conn->sess->sess_ops->MaxBurstLength) : cmd->se_cmd.data_length;
} else {
cmd->seq_start_offset = cmd->seq_end_offset;
cmd->seq_end_offset = ((cmd->seq_end_offset +
conn->sess->sess_ops->MaxBurstLength) >=
cmd->se_cmd.data_length) ? cmd->se_cmd.data_length :
(cmd->seq_end_offset +
conn->sess->sess_ops->MaxBurstLength);
}
}
static int iscsit_dataout_within_command_recovery_check(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
struct iscsi_conn *conn = cmd->conn;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
/*
* We do the within-command recovery checks here as it is
* the first function called in iscsi_check_pre_dataout().
* Basically, if we are in within-command recovery and
* the PDU does not contain the offset the sequence needs,
* dump the payload.
*
* This only applies to DataPDUInOrder=Yes, for
* DataPDUInOrder=No we only re-request the failed PDU
* and check that all PDUs in a sequence are received
* upon end of sequence.
*/
if (conn->sess->sess_ops->DataSequenceInOrder) {
if ((cmd->cmd_flags & ICF_WITHIN_COMMAND_RECOVERY) &&
cmd->write_data_done != be32_to_cpu(hdr->offset))
goto dump;
cmd->cmd_flags &= ~ICF_WITHIN_COMMAND_RECOVERY;
} else {
struct iscsi_seq *seq;
seq = iscsit_get_seq_holder(cmd, be32_to_cpu(hdr->offset),
payload_length);
if (!seq)
return DATAOUT_CANNOT_RECOVER;
/*
* Set the struct iscsi_seq pointer to reuse later.
*/
cmd->seq_ptr = seq;
if (conn->sess->sess_ops->DataPDUInOrder) {
if (seq->status ==
DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY &&
(seq->offset != be32_to_cpu(hdr->offset) ||
seq->data_sn != be32_to_cpu(hdr->datasn)))
goto dump;
} else {
if (seq->status ==
DATAOUT_SEQUENCE_WITHIN_COMMAND_RECOVERY &&
seq->data_sn != be32_to_cpu(hdr->datasn))
goto dump;
}
if (seq->status == DATAOUT_SEQUENCE_COMPLETE)
goto dump;
if (seq->status != DATAOUT_SEQUENCE_COMPLETE)
seq->status = 0;
}
return DATAOUT_NORMAL;
dump:
pr_err("Dumping DataOUT PDU Offset: %u Length: %d DataSN:"
" 0x%08x\n", hdr->offset, payload_length, hdr->datasn);
return iscsit_dump_data_payload(conn, payload_length, 1);
}
static int iscsit_dataout_check_unsolicited_sequence(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
u32 first_burst_len;
struct iscsi_conn *conn = cmd->conn;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
if ((be32_to_cpu(hdr->offset) < cmd->seq_start_offset) ||
((be32_to_cpu(hdr->offset) + payload_length) > cmd->seq_end_offset)) {
pr_err("Command ITT: 0x%08x with Offset: %u,"
" Length: %u outside of Unsolicited Sequence %u:%u while"
" DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
be32_to_cpu(hdr->offset), payload_length, cmd->seq_start_offset,
cmd->seq_end_offset);
return DATAOUT_CANNOT_RECOVER;
}
first_burst_len = (cmd->first_burst_len + payload_length);
if (first_burst_len > conn->sess->sess_ops->FirstBurstLength) {
pr_err("Total %u bytes exceeds FirstBurstLength: %u"
" for this Unsolicited DataOut Burst.\n",
first_burst_len, conn->sess->sess_ops->FirstBurstLength);
transport_send_check_condition_and_sense(&cmd->se_cmd,
TCM_INCORRECT_AMOUNT_OF_DATA, 0);
return DATAOUT_CANNOT_RECOVER;
}
/*
* Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
* checks for the current Unsolicited DataOUT Sequence.
*/
if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
/*
* Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
* sequence checks are handled in
* iscsit_dataout_datapduinorder_no_fbit().
*/
if (!conn->sess->sess_ops->DataPDUInOrder)
goto out;
if ((first_burst_len != cmd->se_cmd.data_length) &&
(first_burst_len != conn->sess->sess_ops->FirstBurstLength)) {
pr_err("Unsolicited non-immediate data"
" received %u does not equal FirstBurstLength: %u, and"
" does not equal ExpXferLen %u.\n", first_burst_len,
conn->sess->sess_ops->FirstBurstLength,
cmd->se_cmd.data_length);
transport_send_check_condition_and_sense(&cmd->se_cmd,
TCM_INCORRECT_AMOUNT_OF_DATA, 0);
return DATAOUT_CANNOT_RECOVER;
}
} else {
if (first_burst_len == conn->sess->sess_ops->FirstBurstLength) {
pr_err("Command ITT: 0x%08x reached"
" FirstBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
" error.\n", cmd->init_task_tag,
conn->sess->sess_ops->FirstBurstLength);
return DATAOUT_CANNOT_RECOVER;
}
if (first_burst_len == cmd->se_cmd.data_length) {
pr_err("Command ITT: 0x%08x reached"
" ExpXferLen: %u, but ISCSI_FLAG_CMD_FINAL is not set. protocol"
" error.\n", cmd->init_task_tag, cmd->se_cmd.data_length);
return DATAOUT_CANNOT_RECOVER;
}
}
out:
return DATAOUT_NORMAL;
}
static int iscsit_dataout_check_sequence(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
u32 next_burst_len;
struct iscsi_conn *conn = cmd->conn;
struct iscsi_seq *seq = NULL;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
/*
* For DataSequenceInOrder=Yes: Check that the offset and offset+length
* is within range as defined by iscsi_set_dataout_sequence_values().
*
* For DataSequenceInOrder=No: Check that an struct iscsi_seq exists for
* offset+length tuple.
*/
if (conn->sess->sess_ops->DataSequenceInOrder) {
/*
* Due to possibility of recovery DataOUT sent by the initiator
* fullfilling an Recovery R2T, it's best to just dump the
* payload here, instead of erroring out.
*/
if ((be32_to_cpu(hdr->offset) < cmd->seq_start_offset) ||
((be32_to_cpu(hdr->offset) + payload_length) > cmd->seq_end_offset)) {
pr_err("Command ITT: 0x%08x with Offset: %u,"
" Length: %u outside of Sequence %u:%u while"
" DataSequenceInOrder=Yes.\n", cmd->init_task_tag,
be32_to_cpu(hdr->offset), payload_length, cmd->seq_start_offset,
cmd->seq_end_offset);
if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
return DATAOUT_CANNOT_RECOVER;
return DATAOUT_WITHIN_COMMAND_RECOVERY;
}
next_burst_len = (cmd->next_burst_len + payload_length);
} else {
seq = iscsit_get_seq_holder(cmd, be32_to_cpu(hdr->offset),
payload_length);
if (!seq)
return DATAOUT_CANNOT_RECOVER;
/*
* Set the struct iscsi_seq pointer to reuse later.
*/
cmd->seq_ptr = seq;
if (seq->status == DATAOUT_SEQUENCE_COMPLETE) {
if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
return DATAOUT_CANNOT_RECOVER;
return DATAOUT_WITHIN_COMMAND_RECOVERY;
}
next_burst_len = (seq->next_burst_len + payload_length);
}
if (next_burst_len > conn->sess->sess_ops->MaxBurstLength) {
pr_err("Command ITT: 0x%08x, NextBurstLength: %u and"
" Length: %u exceeds MaxBurstLength: %u. protocol"
" error.\n", cmd->init_task_tag,
(next_burst_len - payload_length),
payload_length, conn->sess->sess_ops->MaxBurstLength);
return DATAOUT_CANNOT_RECOVER;
}
/*
* Perform various MaxBurstLength and ISCSI_FLAG_CMD_FINAL sanity
* checks for the current DataOUT Sequence.
*/
if (hdr->flags & ISCSI_FLAG_CMD_FINAL) {
/*
* Ignore ISCSI_FLAG_CMD_FINAL checks while DataPDUInOrder=No, end of
* sequence checks are handled in
* iscsit_dataout_datapduinorder_no_fbit().
*/
if (!conn->sess->sess_ops->DataPDUInOrder)
goto out;
if (conn->sess->sess_ops->DataSequenceInOrder) {
if ((next_burst_len <
conn->sess->sess_ops->MaxBurstLength) &&
((cmd->write_data_done + payload_length) <
cmd->se_cmd.data_length)) {
pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
" before end of DataOUT sequence, protocol"
" error.\n", cmd->init_task_tag);
return DATAOUT_CANNOT_RECOVER;
}
} else {
if (next_burst_len < seq->xfer_len) {
pr_err("Command ITT: 0x%08x set ISCSI_FLAG_CMD_FINAL"
" before end of DataOUT sequence, protocol"
" error.\n", cmd->init_task_tag);
return DATAOUT_CANNOT_RECOVER;
}
}
} else {
if (conn->sess->sess_ops->DataSequenceInOrder) {
if (next_burst_len ==
conn->sess->sess_ops->MaxBurstLength) {
pr_err("Command ITT: 0x%08x reached"
" MaxBurstLength: %u, but ISCSI_FLAG_CMD_FINAL is"
" not set, protocol error.", cmd->init_task_tag,
conn->sess->sess_ops->MaxBurstLength);
return DATAOUT_CANNOT_RECOVER;
}
if ((cmd->write_data_done + payload_length) ==
cmd->se_cmd.data_length) {
pr_err("Command ITT: 0x%08x reached"
" last DataOUT PDU in sequence but ISCSI_FLAG_"
"CMD_FINAL is not set, protocol error.\n",
cmd->init_task_tag);
return DATAOUT_CANNOT_RECOVER;
}
} else {
if (next_burst_len == seq->xfer_len) {
pr_err("Command ITT: 0x%08x reached"
" last DataOUT PDU in sequence but ISCSI_FLAG_"
"CMD_FINAL is not set, protocol error.\n",
cmd->init_task_tag);
return DATAOUT_CANNOT_RECOVER;
}
}
}
out:
return DATAOUT_NORMAL;
}
static int iscsit_dataout_check_datasn(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
int dump = 0, recovery = 0;
u32 data_sn = 0;
struct iscsi_conn *conn = cmd->conn;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
/*
* Considering the target has no method of re-requesting DataOUT
* by DataSN, if we receieve a greater DataSN than expected we
* assume the functions for DataPDUInOrder=[Yes,No] below will
* handle it.
*
* If the DataSN is less than expected, dump the payload.
*/
if (conn->sess->sess_ops->DataSequenceInOrder)
data_sn = cmd->data_sn;
else {
struct iscsi_seq *seq = cmd->seq_ptr;
data_sn = seq->data_sn;
}
if (be32_to_cpu(hdr->datasn) > data_sn) {
pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
" higher than expected 0x%08x.\n", cmd->init_task_tag,
be32_to_cpu(hdr->datasn), data_sn);
recovery = 1;
goto recover;
} else if (be32_to_cpu(hdr->datasn) < data_sn) {
pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
" lower than expected 0x%08x, discarding payload.\n",
cmd->init_task_tag, be32_to_cpu(hdr->datasn), data_sn);
dump = 1;
goto dump;
}
return DATAOUT_NORMAL;
recover:
if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
pr_err("Unable to perform within-command recovery"
" while ERL=0.\n");
return DATAOUT_CANNOT_RECOVER;
}
dump:
if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
return DATAOUT_CANNOT_RECOVER;
return (recovery || dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY :
DATAOUT_NORMAL;
}
static int iscsit_dataout_pre_datapduinorder_yes(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
int dump = 0, recovery = 0;
struct iscsi_conn *conn = cmd->conn;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
/*
* For DataSequenceInOrder=Yes: If the offset is greater than the global
* DataPDUInOrder=Yes offset counter in struct iscsi_cmd a protcol error has
* occurred and fail the connection.
*
* For DataSequenceInOrder=No: If the offset is greater than the per
* sequence DataPDUInOrder=Yes offset counter in struct iscsi_seq a protocol
* error has occurred and fail the connection.
*/
if (conn->sess->sess_ops->DataSequenceInOrder) {
if (be32_to_cpu(hdr->offset) != cmd->write_data_done) {
pr_err("Command ITT: 0x%08x, received offset"
" %u different than expected %u.\n", cmd->init_task_tag,
be32_to_cpu(hdr->offset), cmd->write_data_done);
recovery = 1;
goto recover;
}
} else {
struct iscsi_seq *seq = cmd->seq_ptr;
if (be32_to_cpu(hdr->offset) > seq->offset) {
pr_err("Command ITT: 0x%08x, received offset"
" %u greater than expected %u.\n", cmd->init_task_tag,
be32_to_cpu(hdr->offset), seq->offset);
recovery = 1;
goto recover;
} else if (be32_to_cpu(hdr->offset) < seq->offset) {
pr_err("Command ITT: 0x%08x, received offset"
" %u less than expected %u, discarding payload.\n",
cmd->init_task_tag, be32_to_cpu(hdr->offset),
seq->offset);
dump = 1;
goto dump;
}
}
return DATAOUT_NORMAL;
recover:
if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
pr_err("Unable to perform within-command recovery"
" while ERL=0.\n");
return DATAOUT_CANNOT_RECOVER;
}
dump:
if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
return DATAOUT_CANNOT_RECOVER;
return (recovery) ? iscsit_recover_dataout_sequence(cmd,
be32_to_cpu(hdr->offset), payload_length) :
(dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY : DATAOUT_NORMAL;
}
static int iscsit_dataout_pre_datapduinorder_no(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
struct iscsi_pdu *pdu;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
pdu = iscsit_get_pdu_holder(cmd, be32_to_cpu(hdr->offset),
payload_length);
if (!pdu)
return DATAOUT_CANNOT_RECOVER;
cmd->pdu_ptr = pdu;
switch (pdu->status) {
case ISCSI_PDU_NOT_RECEIVED:
case ISCSI_PDU_CRC_FAILED:
case ISCSI_PDU_TIMED_OUT:
break;
case ISCSI_PDU_RECEIVED_OK:
pr_err("Command ITT: 0x%08x received already gotten"
" Offset: %u, Length: %u\n", cmd->init_task_tag,
be32_to_cpu(hdr->offset), payload_length);
return iscsit_dump_data_payload(cmd->conn, payload_length, 1);
default:
return DATAOUT_CANNOT_RECOVER;
}
return DATAOUT_NORMAL;
}
static int iscsit_dataout_update_r2t(struct iscsi_cmd *cmd, u32 offset, u32 length)
{
struct iscsi_r2t *r2t;
if (cmd->unsolicited_data)
return 0;
r2t = iscsit_get_r2t_for_eos(cmd, offset, length);
if (!r2t)
return -1;
spin_lock_bh(&cmd->r2t_lock);
r2t->seq_complete = 1;
cmd->outstanding_r2ts--;
spin_unlock_bh(&cmd->r2t_lock);
return 0;
}
static int iscsit_dataout_update_datapduinorder_no(
struct iscsi_cmd *cmd,
u32 data_sn,
int f_bit)
{
int ret = 0;
struct iscsi_pdu *pdu = cmd->pdu_ptr;
pdu->data_sn = data_sn;
switch (pdu->status) {
case ISCSI_PDU_NOT_RECEIVED:
pdu->status = ISCSI_PDU_RECEIVED_OK;
break;
case ISCSI_PDU_CRC_FAILED:
pdu->status = ISCSI_PDU_RECEIVED_OK;
break;
case ISCSI_PDU_TIMED_OUT:
pdu->status = ISCSI_PDU_RECEIVED_OK;
break;
default:
return DATAOUT_CANNOT_RECOVER;
}
if (f_bit) {
ret = iscsit_dataout_datapduinorder_no_fbit(cmd, pdu);
if (ret == DATAOUT_CANNOT_RECOVER)
return ret;
}
return DATAOUT_NORMAL;
}
static int iscsit_dataout_post_crc_passed(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
int ret, send_r2t = 0;
struct iscsi_conn *conn = cmd->conn;
struct iscsi_seq *seq = NULL;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
if (cmd->unsolicited_data) {
if ((cmd->first_burst_len + payload_length) ==
conn->sess->sess_ops->FirstBurstLength) {
if (iscsit_dataout_update_r2t(cmd, be32_to_cpu(hdr->offset),
payload_length) < 0)
return DATAOUT_CANNOT_RECOVER;
send_r2t = 1;
}
if (!conn->sess->sess_ops->DataPDUInOrder) {
ret = iscsit_dataout_update_datapduinorder_no(cmd,
be32_to_cpu(hdr->datasn),
(hdr->flags & ISCSI_FLAG_CMD_FINAL));
if (ret == DATAOUT_CANNOT_RECOVER)
return ret;
}
cmd->first_burst_len += payload_length;
if (conn->sess->sess_ops->DataSequenceInOrder)
cmd->data_sn++;
else {
seq = cmd->seq_ptr;
seq->data_sn++;
seq->offset += payload_length;
}
if (send_r2t) {
if (seq)
seq->status = DATAOUT_SEQUENCE_COMPLETE;
cmd->first_burst_len = 0;
cmd->unsolicited_data = 0;
}
} else {
if (conn->sess->sess_ops->DataSequenceInOrder) {
if ((cmd->next_burst_len + payload_length) ==
conn->sess->sess_ops->MaxBurstLength) {
if (iscsit_dataout_update_r2t(cmd,
be32_to_cpu(hdr->offset),
payload_length) < 0)
return DATAOUT_CANNOT_RECOVER;
send_r2t = 1;
}
if (!conn->sess->sess_ops->DataPDUInOrder) {
ret = iscsit_dataout_update_datapduinorder_no(
cmd, be32_to_cpu(hdr->datasn),
(hdr->flags & ISCSI_FLAG_CMD_FINAL));
if (ret == DATAOUT_CANNOT_RECOVER)
return ret;
}
cmd->next_burst_len += payload_length;
cmd->data_sn++;
if (send_r2t)
cmd->next_burst_len = 0;
} else {
seq = cmd->seq_ptr;
if ((seq->next_burst_len + payload_length) ==
seq->xfer_len) {
if (iscsit_dataout_update_r2t(cmd,
be32_to_cpu(hdr->offset),
payload_length) < 0)
return DATAOUT_CANNOT_RECOVER;
send_r2t = 1;
}
if (!conn->sess->sess_ops->DataPDUInOrder) {
ret = iscsit_dataout_update_datapduinorder_no(
cmd, be32_to_cpu(hdr->datasn),
(hdr->flags & ISCSI_FLAG_CMD_FINAL));
if (ret == DATAOUT_CANNOT_RECOVER)
return ret;
}
seq->data_sn++;
seq->offset += payload_length;
seq->next_burst_len += payload_length;
if (send_r2t) {
seq->next_burst_len = 0;
seq->status = DATAOUT_SEQUENCE_COMPLETE;
}
}
}
if (send_r2t && conn->sess->sess_ops->DataSequenceInOrder)
cmd->data_sn = 0;
cmd->write_data_done += payload_length;
if (cmd->write_data_done == cmd->se_cmd.data_length)
return DATAOUT_SEND_TO_TRANSPORT;
else if (send_r2t)
return DATAOUT_SEND_R2T;
else
return DATAOUT_NORMAL;
}
static int iscsit_dataout_post_crc_failed(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
struct iscsi_conn *conn = cmd->conn;
struct iscsi_pdu *pdu;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
u32 payload_length = ntoh24(hdr->dlength);
if (conn->sess->sess_ops->DataPDUInOrder)
goto recover;
/*
* The rest of this function is only called when DataPDUInOrder=No.
*/
pdu = cmd->pdu_ptr;
switch (pdu->status) {
case ISCSI_PDU_NOT_RECEIVED:
pdu->status = ISCSI_PDU_CRC_FAILED;
break;
case ISCSI_PDU_CRC_FAILED:
break;
case ISCSI_PDU_TIMED_OUT:
pdu->status = ISCSI_PDU_CRC_FAILED;
break;
default:
return DATAOUT_CANNOT_RECOVER;
}
recover:
return iscsit_recover_dataout_sequence(cmd, be32_to_cpu(hdr->offset),
payload_length);
}
/*
* Called from iscsit_handle_data_out() before DataOUT Payload is received
* and CRC computed.
*/
int iscsit_check_pre_dataout(
struct iscsi_cmd *cmd,
unsigned char *buf)
{
int ret;
struct iscsi_conn *conn = cmd->conn;
ret = iscsit_dataout_within_command_recovery_check(cmd, buf);
if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
(ret == DATAOUT_CANNOT_RECOVER))
return ret;
ret = iscsit_dataout_check_datasn(cmd, buf);
if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
(ret == DATAOUT_CANNOT_RECOVER))
return ret;
if (cmd->unsolicited_data) {
ret = iscsit_dataout_check_unsolicited_sequence(cmd, buf);
if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
(ret == DATAOUT_CANNOT_RECOVER))
return ret;
} else {
ret = iscsit_dataout_check_sequence(cmd, buf);
if ((ret == DATAOUT_WITHIN_COMMAND_RECOVERY) ||
(ret == DATAOUT_CANNOT_RECOVER))
return ret;
}
return (conn->sess->sess_ops->DataPDUInOrder) ?
iscsit_dataout_pre_datapduinorder_yes(cmd, buf) :
iscsit_dataout_pre_datapduinorder_no(cmd, buf);
}
/*
* Called from iscsit_handle_data_out() after DataOUT Payload is received
* and CRC computed.
*/
int iscsit_check_post_dataout(
struct iscsi_cmd *cmd,
unsigned char *buf,
u8 data_crc_failed)
{
struct iscsi_conn *conn = cmd->conn;
cmd->dataout_timeout_retries = 0;
if (!data_crc_failed)
return iscsit_dataout_post_crc_passed(cmd, buf);
else {
if (!conn->sess->sess_ops->ErrorRecoveryLevel) {
pr_err("Unable to recover from DataOUT CRC"
" failure while ERL=0, closing session.\n");
iscsit_reject_cmd(cmd, ISCSI_REASON_DATA_DIGEST_ERROR,
buf);
return DATAOUT_CANNOT_RECOVER;
}
iscsit_reject_cmd(cmd, ISCSI_REASON_DATA_DIGEST_ERROR, buf);
return iscsit_dataout_post_crc_failed(cmd, buf);
}
}
static void iscsit_handle_time2retain_timeout(unsigned long data)
{
struct iscsi_session *sess = (struct iscsi_session *) data;
struct iscsi_portal_group *tpg = sess->tpg;
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
spin_lock_bh(&se_tpg->session_lock);
if (sess->time2retain_timer_flags & ISCSI_TF_STOP) {
spin_unlock_bh(&se_tpg->session_lock);
return;
}
if (atomic_read(&sess->session_reinstatement)) {
pr_err("Exiting Time2Retain handler because"
" session_reinstatement=1\n");
spin_unlock_bh(&se_tpg->session_lock);
return;
}
sess->time2retain_timer_flags |= ISCSI_TF_EXPIRED;
pr_err("Time2Retain timer expired for SID: %u, cleaning up"
" iSCSI session.\n", sess->sid);
{
struct iscsi_tiqn *tiqn = tpg->tpg_tiqn;
if (tiqn) {
spin_lock(&tiqn->sess_err_stats.lock);
strcpy(tiqn->sess_err_stats.last_sess_fail_rem_name,
(void *)sess->sess_ops->InitiatorName);
tiqn->sess_err_stats.last_sess_failure_type =
ISCSI_SESS_ERR_CXN_TIMEOUT;
tiqn->sess_err_stats.cxn_timeout_errors++;
atomic_long_inc(&sess->conn_timeout_errors);
spin_unlock(&tiqn->sess_err_stats.lock);
}
}
spin_unlock_bh(&se_tpg->session_lock);
target_put_session(sess->se_sess);
}
void iscsit_start_time2retain_handler(struct iscsi_session *sess)
{
int tpg_active;
/*
* Only start Time2Retain timer when the associated TPG is still in
* an ACTIVE (eg: not disabled or shutdown) state.
*/
spin_lock(&sess->tpg->tpg_state_lock);
tpg_active = (sess->tpg->tpg_state == TPG_STATE_ACTIVE);
spin_unlock(&sess->tpg->tpg_state_lock);
if (!tpg_active)
return;
if (sess->time2retain_timer_flags & ISCSI_TF_RUNNING)
return;
pr_debug("Starting Time2Retain timer for %u seconds on"
" SID: %u\n", sess->sess_ops->DefaultTime2Retain, sess->sid);
init_timer(&sess->time2retain_timer);
sess->time2retain_timer.expires =
(get_jiffies_64() + sess->sess_ops->DefaultTime2Retain * HZ);
sess->time2retain_timer.data = (unsigned long)sess;
sess->time2retain_timer.function = iscsit_handle_time2retain_timeout;
sess->time2retain_timer_flags &= ~ISCSI_TF_STOP;
sess->time2retain_timer_flags |= ISCSI_TF_RUNNING;
add_timer(&sess->time2retain_timer);
}
/*
* Called with spin_lock_bh(&struct se_portal_group->session_lock) held
*/
int iscsit_stop_time2retain_timer(struct iscsi_session *sess)
{
struct iscsi_portal_group *tpg = sess->tpg;
struct se_portal_group *se_tpg = &tpg->tpg_se_tpg;
if (sess->time2retain_timer_flags & ISCSI_TF_EXPIRED)
return -1;
if (!(sess->time2retain_timer_flags & ISCSI_TF_RUNNING))
return 0;
sess->time2retain_timer_flags |= ISCSI_TF_STOP;
spin_unlock(&se_tpg->session_lock);
del_timer_sync(&sess->time2retain_timer);
spin_lock(&se_tpg->session_lock);
sess->time2retain_timer_flags &= ~ISCSI_TF_RUNNING;
pr_debug("Stopped Time2Retain Timer for SID: %u\n",
sess->sid);
return 0;
}
void iscsit_connection_reinstatement_rcfr(struct iscsi_conn *conn)
{
spin_lock_bh(&conn->state_lock);
if (atomic_read(&conn->connection_exit)) {
spin_unlock_bh(&conn->state_lock);
goto sleep;
}
if (atomic_read(&conn->transport_failed)) {
spin_unlock_bh(&conn->state_lock);
goto sleep;
}
spin_unlock_bh(&conn->state_lock);
iscsi_thread_set_force_reinstatement(conn);
sleep:
wait_for_completion(&conn->conn_wait_rcfr_comp);
complete(&conn->conn_post_wait_comp);
}
void iscsit_cause_connection_reinstatement(struct iscsi_conn *conn, int sleep)
{
spin_lock_bh(&conn->state_lock);
if (atomic_read(&conn->connection_exit)) {
spin_unlock_bh(&conn->state_lock);
return;
}
if (atomic_read(&conn->transport_failed)) {
spin_unlock_bh(&conn->state_lock);
return;
}
if (atomic_read(&conn->connection_reinstatement)) {
spin_unlock_bh(&conn->state_lock);
return;
}
if (iscsi_thread_set_force_reinstatement(conn) < 0) {
spin_unlock_bh(&conn->state_lock);
return;
}
atomic_set(&conn->connection_reinstatement, 1);
if (!sleep) {
spin_unlock_bh(&conn->state_lock);
return;
}
atomic_set(&conn->sleep_on_conn_wait_comp, 1);
spin_unlock_bh(&conn->state_lock);
wait_for_completion(&conn->conn_wait_comp);
complete(&conn->conn_post_wait_comp);
}
EXPORT_SYMBOL(iscsit_cause_connection_reinstatement);
void iscsit_fall_back_to_erl0(struct iscsi_session *sess)
{
pr_debug("Falling back to ErrorRecoveryLevel=0 for SID:"
" %u\n", sess->sid);
atomic_set(&sess->session_fall_back_to_erl0, 1);
}
static void iscsit_handle_connection_cleanup(struct iscsi_conn *conn)
{
struct iscsi_session *sess = conn->sess;
if ((sess->sess_ops->ErrorRecoveryLevel == 2) &&
!atomic_read(&sess->session_reinstatement) &&
!atomic_read(&sess->session_fall_back_to_erl0))
iscsit_connection_recovery_transport_reset(conn);
else {
pr_debug("Performing cleanup for failed iSCSI"
" Connection ID: %hu from %s\n", conn->cid,
sess->sess_ops->InitiatorName);
iscsit_close_connection(conn);
}
}
void iscsit_take_action_for_connection_exit(struct iscsi_conn *conn)
{
spin_lock_bh(&conn->state_lock);
if (atomic_read(&conn->connection_exit)) {
spin_unlock_bh(&conn->state_lock);
return;
}
atomic_set(&conn->connection_exit, 1);
if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT) {
spin_unlock_bh(&conn->state_lock);
iscsit_close_connection(conn);
return;
}
if (conn->conn_state == TARG_CONN_STATE_CLEANUP_WAIT) {
spin_unlock_bh(&conn->state_lock);
return;
}
pr_debug("Moving to TARG_CONN_STATE_CLEANUP_WAIT.\n");
conn->conn_state = TARG_CONN_STATE_CLEANUP_WAIT;
spin_unlock_bh(&conn->state_lock);
iscsit_handle_connection_cleanup(conn);
}
/*
* This is the simple function that makes the magic of
* sync and steering happen in the follow paradoxical order:
*
* 0) Receive conn->of_marker (bytes left until next OFMarker)
* bytes into an offload buffer. When we pass the exact number
* of bytes in conn->of_marker, iscsit_dump_data_payload() and hence
* rx_data() will automatically receive the identical u32 marker
* values and store it in conn->of_marker_offset;
* 1) Now conn->of_marker_offset will contain the offset to the start
* of the next iSCSI PDU. Dump these remaining bytes into another
* offload buffer.
* 2) We are done!
* Next byte in the TCP stream will contain the next iSCSI PDU!
* Cool Huh?!
*/
int iscsit_recover_from_unknown_opcode(struct iscsi_conn *conn)
{
/*
* Make sure the remaining bytes to next maker is a sane value.
*/
if (conn->of_marker > (conn->conn_ops->OFMarkInt * 4)) {
pr_err("Remaining bytes to OFMarker: %u exceeds"
" OFMarkInt bytes: %u.\n", conn->of_marker,
conn->conn_ops->OFMarkInt * 4);
return -1;
}
pr_debug("Advancing %u bytes in TCP stream to get to the"
" next OFMarker.\n", conn->of_marker);
if (iscsit_dump_data_payload(conn, conn->of_marker, 0) < 0)
return -1;
/*
* Make sure the offset marker we retrived is a valid value.
*/
if (conn->of_marker_offset > (ISCSI_HDR_LEN + (ISCSI_CRC_LEN * 2) +
conn->conn_ops->MaxRecvDataSegmentLength)) {
pr_err("OfMarker offset value: %u exceeds limit.\n",
conn->of_marker_offset);
return -1;
}
pr_debug("Discarding %u bytes of TCP stream to get to the"
" next iSCSI Opcode.\n", conn->of_marker_offset);
if (iscsit_dump_data_payload(conn, conn->of_marker_offset, 0) < 0)
return -1;
return 0;
}