- 根目录:
- drivers
- irqchip
- irq-metag.c
/*
* Meta internal (HWSTATMETA) interrupt code.
*
* Copyright (C) 2011-2012 Imagination Technologies Ltd.
*
* This code is based on the code in SoC/common/irq.c and SoC/comet/irq.c
* The code base could be generalised/merged as a lot of the functionality is
* similar. Until this is done, we try to keep the code simple here.
*/
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irqdomain.h>
#include <asm/irq.h>
#include <asm/hwthread.h>
#define PERF0VECINT 0x04820580
#define PERF1VECINT 0x04820588
#define PERF0TRIG_OFFSET 16
#define PERF1TRIG_OFFSET 17
/**
* struct metag_internal_irq_priv - private meta internal interrupt data
* @domain: IRQ domain for all internal Meta IRQs (HWSTATMETA)
* @unmasked: Record of unmasked IRQs
*/
struct metag_internal_irq_priv {
struct irq_domain *domain;
unsigned long unmasked;
};
/* Private data for the one and only internal interrupt controller */
static struct metag_internal_irq_priv metag_internal_irq_priv;
static unsigned int metag_internal_irq_startup(struct irq_data *data);
static void metag_internal_irq_shutdown(struct irq_data *data);
static void metag_internal_irq_ack(struct irq_data *data);
static void metag_internal_irq_mask(struct irq_data *data);
static void metag_internal_irq_unmask(struct irq_data *data);
#ifdef CONFIG_SMP
static int metag_internal_irq_set_affinity(struct irq_data *data,
const struct cpumask *cpumask, bool force);
#endif
static struct irq_chip internal_irq_edge_chip = {
.name = "HWSTATMETA-IRQ",
.irq_startup = metag_internal_irq_startup,
.irq_shutdown = metag_internal_irq_shutdown,
.irq_ack = metag_internal_irq_ack,
.irq_mask = metag_internal_irq_mask,
.irq_unmask = metag_internal_irq_unmask,
#ifdef CONFIG_SMP
.irq_set_affinity = metag_internal_irq_set_affinity,
#endif
};
/*
* metag_hwvec_addr - get the address of *VECINT regs of irq
*
* This function is a table of supported triggers on HWSTATMETA
* Could do with a structure, but better keep it simple. Changes
* in this code should be rare.
*/
static inline void __iomem *metag_hwvec_addr(irq_hw_number_t hw)
{
void __iomem *addr;
switch (hw) {
case PERF0TRIG_OFFSET:
addr = (void __iomem *)PERF0VECINT;
break;
case PERF1TRIG_OFFSET:
addr = (void __iomem *)PERF1VECINT;
break;
default:
addr = NULL;
break;
}
return addr;
}
/*
* metag_internal_startup - setup an internal irq
* @irq: the irq to startup
*
* Multiplex interrupts for @irq onto TR1. Clear any pending
* interrupts.
*/
static unsigned int metag_internal_irq_startup(struct irq_data *data)
{
/* Clear (toggle) the bit in HWSTATMETA for our interrupt. */
metag_internal_irq_ack(data);
/* Enable the interrupt by unmasking it */
metag_internal_irq_unmask(data);
return 0;
}
/*
* metag_internal_irq_shutdown - turn off the irq
* @irq: the irq number to turn off
*
* Mask @irq and clear any pending interrupts.
* Stop muxing @irq onto TR1.
*/
static void metag_internal_irq_shutdown(struct irq_data *data)
{
/* Disable the IRQ at the core by masking it. */
metag_internal_irq_mask(data);
/* Clear (toggle) the bit in HWSTATMETA for our interrupt. */
metag_internal_irq_ack(data);
}
/*
* metag_internal_irq_ack - acknowledge irq
* @irq: the irq to ack
*/
static void metag_internal_irq_ack(struct irq_data *data)
{
irq_hw_number_t hw = data->hwirq;
unsigned int bit = 1 << hw;
if (metag_in32(HWSTATMETA) & bit)
metag_out32(bit, HWSTATMETA);
}
/**
* metag_internal_irq_mask() - mask an internal irq by unvectoring
* @data: data for the internal irq to mask
*
* HWSTATMETA has no mask register. Instead the IRQ is unvectored from the core
* and retriggered if necessary later.
*/
static void metag_internal_irq_mask(struct irq_data *data)
{
struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
irq_hw_number_t hw = data->hwirq;
void __iomem *vec_addr = metag_hwvec_addr(hw);
clear_bit(hw, &priv->unmasked);
/* there is no interrupt mask, so unvector the interrupt */
metag_out32(0, vec_addr);
}
/**
* meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring
* @data: data for the internal irq to unmask
*
* HWSTATMETA has no mask register. Instead the IRQ is revectored back to the
* core and retriggered if necessary.
*/
static void metag_internal_irq_unmask(struct irq_data *data)
{
struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
irq_hw_number_t hw = data->hwirq;
unsigned int bit = 1 << hw;
void __iomem *vec_addr = metag_hwvec_addr(hw);
unsigned int thread = hard_processor_id();
set_bit(hw, &priv->unmasked);
/* there is no interrupt mask, so revector the interrupt */
metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), vec_addr);
/*
* Re-trigger interrupt
*
* Writing a 1 toggles, and a 0->1 transition triggers. We only
* retrigger if the status bit is already set, which means we
* need to clear it first. Retriggering is fundamentally racy
* because if the interrupt fires again after we clear it we
* could end up clearing it again and the interrupt handler
* thinking it hasn't fired. Therefore we need to keep trying to
* retrigger until the bit is set.
*/
if (metag_in32(HWSTATMETA) & bit) {
metag_out32(bit, HWSTATMETA);
while (!(metag_in32(HWSTATMETA) & bit))
metag_out32(bit, HWSTATMETA);
}
}
#ifdef CONFIG_SMP
/*
* metag_internal_irq_set_affinity - set the affinity for an interrupt
*/
static int metag_internal_irq_set_affinity(struct irq_data *data,
const struct cpumask *cpumask, bool force)
{
unsigned int cpu, thread;
irq_hw_number_t hw = data->hwirq;
/*
* Wire up this interrupt from *VECINT to the Meta core.
*
* Note that we can't wire up *VECINT to interrupt more than
* one cpu (the interrupt code doesn't support it), so we just
* pick the first cpu we find in 'cpumask'.
*/
cpu = cpumask_any_and(cpumask, cpu_online_mask);
thread = cpu_2_hwthread_id[cpu];
metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)),
metag_hwvec_addr(hw));
return 0;
}
#endif
/*
* metag_internal_irq_demux - irq de-multiplexer
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* The cpu receives an interrupt on TR1 when an interrupt has
* occurred. It is this function's job to demux this irq and
* figure out exactly which trigger needs servicing.
*/
static void metag_internal_irq_demux(unsigned int irq, struct irq_desc *desc)
{
struct metag_internal_irq_priv *priv = irq_desc_get_handler_data(desc);
irq_hw_number_t hw;
unsigned int irq_no;
u32 status;
recalculate:
status = metag_in32(HWSTATMETA) & priv->unmasked;
for (hw = 0; status != 0; status >>= 1, ++hw) {
if (status & 0x1) {
/*
* Map the hardware IRQ number to a virtual Linux IRQ
* number.
*/
irq_no = irq_linear_revmap(priv->domain, hw);
/*
* Only fire off interrupts that are
* registered to be handled by the kernel.
* Other interrupts are probably being
* handled by other Meta hardware threads.
*/
generic_handle_irq(irq_no);
/*
* The handler may have re-enabled interrupts
* which could have caused a nested invocation
* of this code and make the copy of the
* status register we are using invalid.
*/
goto recalculate;
}
}
}
/**
* internal_irq_map() - Map an internal meta IRQ to a virtual IRQ number.
* @hw: Number of the internal IRQ. Must be in range.
*
* Returns: The virtual IRQ number of the Meta internal IRQ specified by
* @hw.
*/
int internal_irq_map(unsigned int hw)
{
struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
if (!priv->domain)
return -ENODEV;
return irq_create_mapping(priv->domain, hw);
}
/**
* metag_internal_irq_init_cpu - regsister with the Meta cpu
* @cpu: the CPU to register on
*
* Configure @cpu's TR1 irq so that we can demux irqs.
*/
static void metag_internal_irq_init_cpu(struct metag_internal_irq_priv *priv,
int cpu)
{
unsigned int thread = cpu_2_hwthread_id[cpu];
unsigned int signum = TBID_SIGNUM_TR1(thread);
int irq = tbisig_map(signum);
/* Register the multiplexed IRQ handler */
irq_set_handler_data(irq, priv);
irq_set_chained_handler(irq, metag_internal_irq_demux);
irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW);
}
/**
* metag_internal_intc_map() - map an internal irq
* @d: irq domain of internal trigger block
* @irq: virtual irq number
* @hw: hardware irq number within internal trigger block
*
* This sets up a virtual irq for a specified hardware interrupt. The irq chip
* and handler is configured.
*/
static int metag_internal_intc_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
/* only register interrupt if it is mapped */
if (!metag_hwvec_addr(hw))
return -EINVAL;
irq_set_chip_and_handler(irq, &internal_irq_edge_chip,
handle_edge_irq);
return 0;
}
static const struct irq_domain_ops metag_internal_intc_domain_ops = {
.map = metag_internal_intc_map,
};
/**
* metag_internal_irq_register - register internal IRQs
*
* Register the irq chip and handler function for all internal IRQs
*/
int __init init_internal_IRQ(void)
{
struct metag_internal_irq_priv *priv = &metag_internal_irq_priv;
unsigned int cpu;
/* Set up an IRQ domain */
priv->domain = irq_domain_add_linear(NULL, 32,
&metag_internal_intc_domain_ops,
priv);
if (unlikely(!priv->domain)) {
pr_err("meta-internal-intc: cannot add IRQ domain\n");
return -ENOMEM;
}
/* Setup TR1 for all cpus. */
for_each_possible_cpu(cpu)
metag_internal_irq_init_cpu(priv, cpu);
return 0;
};