/* * dvb_ca.c: generic DVB functions for EN50221 CAM interfaces * * Copyright (C) 2004 Andrew de Quincey * * Parts of this file were based on sources as follows: * * Copyright (C) 2003 Ralph Metzler <rjkm@metzlerbros.de> * * based on code: * * Copyright (C) 1999-2002 Ralph Metzler * & Marcus Metzler for convergence integrated media GmbH * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version 2 * of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Or, point your browser to http://www.gnu.org/copyleft/gpl.html */ #include <linux/errno.h> #include <linux/slab.h> #include <linux/list.h> #include <linux/module.h> #include <linux/vmalloc.h> #include <linux/delay.h> #include <linux/spinlock.h> #include <linux/sched.h> #include <linux/kthread.h> #include "dvb_ca_en50221.h" #include "dvb_ringbuffer.h" static int dvb_ca_en50221_debug; module_param_named(cam_debug, dvb_ca_en50221_debug, int, 0644); MODULE_PARM_DESC(cam_debug, "enable verbose debug messages"); #define dprintk if (dvb_ca_en50221_debug) printk #define INIT_TIMEOUT_SECS 10 #define HOST_LINK_BUF_SIZE 0x200 #define RX_BUFFER_SIZE 65535 #define MAX_RX_PACKETS_PER_ITERATION 10 #define CTRLIF_DATA 0 #define CTRLIF_COMMAND 1 #define CTRLIF_STATUS 1 #define CTRLIF_SIZE_LOW 2 #define CTRLIF_SIZE_HIGH 3 #define CMDREG_HC 1 /* Host control */ #define CMDREG_SW 2 /* Size write */ #define CMDREG_SR 4 /* Size read */ #define CMDREG_RS 8 /* Reset interface */ #define CMDREG_FRIE 0x40 /* Enable FR interrupt */ #define CMDREG_DAIE 0x80 /* Enable DA interrupt */ #define IRQEN (CMDREG_DAIE) #define STATUSREG_RE 1 /* read error */ #define STATUSREG_WE 2 /* write error */ #define STATUSREG_FR 0x40 /* module free */ #define STATUSREG_DA 0x80 /* data available */ #define STATUSREG_TXERR (STATUSREG_RE|STATUSREG_WE) /* general transfer error */ #define DVB_CA_SLOTSTATE_NONE 0 #define DVB_CA_SLOTSTATE_UNINITIALISED 1 #define DVB_CA_SLOTSTATE_RUNNING 2 #define DVB_CA_SLOTSTATE_INVALID 3 #define DVB_CA_SLOTSTATE_WAITREADY 4 #define DVB_CA_SLOTSTATE_VALIDATE 5 #define DVB_CA_SLOTSTATE_WAITFR 6 #define DVB_CA_SLOTSTATE_LINKINIT 7 /* Information on a CA slot */ struct dvb_ca_slot { /* current state of the CAM */ int slot_state; /* mutex used for serializing access to one CI slot */ struct mutex slot_lock; /* Number of CAMCHANGES that have occurred since last processing */ atomic_t camchange_count; /* Type of last CAMCHANGE */ int camchange_type; /* base address of CAM config */ u32 config_base; /* value to write into Config Control register */ u8 config_option; /* if 1, the CAM supports DA IRQs */ u8 da_irq_supported:1; /* size of the buffer to use when talking to the CAM */ int link_buf_size; /* buffer for incoming packets */ struct dvb_ringbuffer rx_buffer; /* timer used during various states of the slot */ unsigned long timeout; }; /* Private CA-interface information */ struct dvb_ca_private { /* pointer back to the public data structure */ struct dvb_ca_en50221 *pub; /* the DVB device */ struct dvb_device *dvbdev; /* Flags describing the interface (DVB_CA_FLAG_*) */ u32 flags; /* number of slots supported by this CA interface */ unsigned int slot_count; /* information on each slot */ struct dvb_ca_slot *slot_info; /* wait queues for read() and write() operations */ wait_queue_head_t wait_queue; /* PID of the monitoring thread */ struct task_struct *thread; /* Flag indicating if the CA device is open */ unsigned int open:1; /* Flag indicating the thread should wake up now */ unsigned int wakeup:1; /* Delay the main thread should use */ unsigned long delay; /* Slot to start looking for data to read from in the next user-space read operation */ int next_read_slot; }; static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca); static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount); static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount); /** * Safely find needle in haystack. * * @param haystack Buffer to look in. * @param hlen Number of bytes in haystack. * @param needle Buffer to find. * @param nlen Number of bytes in needle. * @return Pointer into haystack needle was found at, or NULL if not found. */ static char *findstr(char * haystack, int hlen, char * needle, int nlen) { int i; if (hlen < nlen) return NULL; for (i = 0; i <= hlen - nlen; i++) { if (!strncmp(haystack + i, needle, nlen)) return haystack + i; } return NULL; } /* ******************************************************************************** */ /* EN50221 physical interface functions */ /** * Check CAM status. */ static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot) { int slot_status; int cam_present_now; int cam_changed; /* IRQ mode */ if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) { return (atomic_read(&ca->slot_info[slot].camchange_count) != 0); } /* poll mode */ slot_status = ca->pub->poll_slot_status(ca->pub, slot, ca->open); cam_present_now = (slot_status & DVB_CA_EN50221_POLL_CAM_PRESENT) ? 1 : 0; cam_changed = (slot_status & DVB_CA_EN50221_POLL_CAM_CHANGED) ? 1 : 0; if (!cam_changed) { int cam_present_old = (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE); cam_changed = (cam_present_now != cam_present_old); } if (cam_changed) { if (!cam_present_now) { ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; } else { ca->slot_info[slot].camchange_type = DVB_CA_EN50221_CAMCHANGE_INSERTED; } atomic_set(&ca->slot_info[slot].camchange_count, 1); } else { if ((ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) && (slot_status & DVB_CA_EN50221_POLL_CAM_READY)) { // move to validate state if reset is completed ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE; } } return cam_changed; } /** * Wait for flags to become set on the STATUS register on a CAM interface, * checking for errors and timeout. * * @param ca CA instance. * @param slot Slot on interface. * @param waitfor Flags to wait for. * @param timeout_ms Timeout in milliseconds. * * @return 0 on success, nonzero on error. */ static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot, u8 waitfor, int timeout_hz) { unsigned long timeout; unsigned long start; dprintk("%s\n", __func__); /* loop until timeout elapsed */ start = jiffies; timeout = jiffies + timeout_hz; while (1) { /* read the status and check for error */ int res = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); if (res < 0) return -EIO; /* if we got the flags, it was successful! */ if (res & waitfor) { dprintk("%s succeeded timeout:%lu\n", __func__, jiffies - start); return 0; } /* check for timeout */ if (time_after(jiffies, timeout)) { break; } /* wait for a bit */ msleep(1); } dprintk("%s failed timeout:%lu\n", __func__, jiffies - start); /* if we get here, we've timed out */ return -ETIMEDOUT; } /** * Initialise the link layer connection to a CAM. * * @param ca CA instance. * @param slot Slot id. * * @return 0 on success, nonzero on failure. */ static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot) { int ret; int buf_size; u8 buf[2]; dprintk("%s\n", __func__); /* we'll be determining these during this function */ ca->slot_info[slot].da_irq_supported = 0; /* set the host link buffer size temporarily. it will be overwritten with the * real negotiated size later. */ ca->slot_info[slot].link_buf_size = 2; /* read the buffer size from the CAM */ if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SR)) != 0) return ret; if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_DA, HZ / 10)) != 0) return ret; if ((ret = dvb_ca_en50221_read_data(ca, slot, buf, 2)) != 2) return -EIO; if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0) return ret; /* store it, and choose the minimum of our buffer and the CAM's buffer size */ buf_size = (buf[0] << 8) | buf[1]; if (buf_size > HOST_LINK_BUF_SIZE) buf_size = HOST_LINK_BUF_SIZE; ca->slot_info[slot].link_buf_size = buf_size; buf[0] = buf_size >> 8; buf[1] = buf_size & 0xff; dprintk("Chosen link buffer size of %i\n", buf_size); /* write the buffer size to the CAM */ if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_SW)) != 0) return ret; if ((ret = dvb_ca_en50221_wait_if_status(ca, slot, STATUSREG_FR, HZ / 10)) != 0) return ret; if ((ret = dvb_ca_en50221_write_data(ca, slot, buf, 2)) != 2) return -EIO; if ((ret = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN)) != 0) return ret; /* success */ return 0; } /** * Read a tuple from attribute memory. * * @param ca CA instance. * @param slot Slot id. * @param address Address to read from. Updated. * @param tupleType Tuple id byte. Updated. * @param tupleLength Tuple length. Updated. * @param tuple Dest buffer for tuple (must be 256 bytes). Updated. * * @return 0 on success, nonzero on error. */ static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot, int *address, int *tupleType, int *tupleLength, u8 * tuple) { int i; int _tupleType; int _tupleLength; int _address = *address; /* grab the next tuple length and type */ if ((_tupleType = ca->pub->read_attribute_mem(ca->pub, slot, _address)) < 0) return _tupleType; if (_tupleType == 0xff) { dprintk("END OF CHAIN TUPLE type:0x%x\n", _tupleType); *address += 2; *tupleType = _tupleType; *tupleLength = 0; return 0; } if ((_tupleLength = ca->pub->read_attribute_mem(ca->pub, slot, _address + 2)) < 0) return _tupleLength; _address += 4; dprintk("TUPLE type:0x%x length:%i\n", _tupleType, _tupleLength); /* read in the whole tuple */ for (i = 0; i < _tupleLength; i++) { tuple[i] = ca->pub->read_attribute_mem(ca->pub, slot, _address + (i * 2)); dprintk(" 0x%02x: 0x%02x %c\n", i, tuple[i] & 0xff, ((tuple[i] > 31) && (tuple[i] < 127)) ? tuple[i] : '.'); } _address += (_tupleLength * 2); // success *tupleType = _tupleType; *tupleLength = _tupleLength; *address = _address; return 0; } /** * Parse attribute memory of a CAM module, extracting Config register, and checking * it is a DVB CAM module. * * @param ca CA instance. * @param slot Slot id. * * @return 0 on success, <0 on failure. */ static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot) { int address = 0; int tupleLength; int tupleType; u8 tuple[257]; char *dvb_str; int rasz; int status; int got_cftableentry = 0; int end_chain = 0; int i; u16 manfid = 0; u16 devid = 0; // CISTPL_DEVICE_0A if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) return status; if (tupleType != 0x1D) return -EINVAL; // CISTPL_DEVICE_0C if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) return status; if (tupleType != 0x1C) return -EINVAL; // CISTPL_VERS_1 if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) return status; if (tupleType != 0x15) return -EINVAL; // CISTPL_MANFID if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) return status; if (tupleType != 0x20) return -EINVAL; if (tupleLength != 4) return -EINVAL; manfid = (tuple[1] << 8) | tuple[0]; devid = (tuple[3] << 8) | tuple[2]; // CISTPL_CONFIG if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) return status; if (tupleType != 0x1A) return -EINVAL; if (tupleLength < 3) return -EINVAL; /* extract the configbase */ rasz = tuple[0] & 3; if (tupleLength < (3 + rasz + 14)) return -EINVAL; ca->slot_info[slot].config_base = 0; for (i = 0; i < rasz + 1; i++) { ca->slot_info[slot].config_base |= (tuple[2 + i] << (8 * i)); } /* check it contains the correct DVB string */ dvb_str = findstr((char *)tuple, tupleLength, "DVB_CI_V", 8); if (dvb_str == NULL) return -EINVAL; if (tupleLength < ((dvb_str - (char *) tuple) + 12)) return -EINVAL; /* is it a version we support? */ if (strncmp(dvb_str + 8, "1.00", 4)) { printk("dvb_ca adapter %d: Unsupported DVB CAM module version %c%c%c%c\n", ca->dvbdev->adapter->num, dvb_str[8], dvb_str[9], dvb_str[10], dvb_str[11]); return -EINVAL; } /* process the CFTABLE_ENTRY tuples, and any after those */ while ((!end_chain) && (address < 0x1000)) { if ((status = dvb_ca_en50221_read_tuple(ca, slot, &address, &tupleType, &tupleLength, tuple)) < 0) return status; switch (tupleType) { case 0x1B: // CISTPL_CFTABLE_ENTRY if (tupleLength < (2 + 11 + 17)) break; /* if we've already parsed one, just use it */ if (got_cftableentry) break; /* get the config option */ ca->slot_info[slot].config_option = tuple[0] & 0x3f; /* OK, check it contains the correct strings */ if ((findstr((char *)tuple, tupleLength, "DVB_HOST", 8) == NULL) || (findstr((char *)tuple, tupleLength, "DVB_CI_MODULE", 13) == NULL)) break; got_cftableentry = 1; break; case 0x14: // CISTPL_NO_LINK break; case 0xFF: // CISTPL_END end_chain = 1; break; default: /* Unknown tuple type - just skip this tuple and move to the next one */ dprintk("dvb_ca: Skipping unknown tuple type:0x%x length:0x%x\n", tupleType, tupleLength); break; } } if ((address > 0x1000) || (!got_cftableentry)) return -EINVAL; dprintk("Valid DVB CAM detected MANID:%x DEVID:%x CONFIGBASE:0x%x CONFIGOPTION:0x%x\n", manfid, devid, ca->slot_info[slot].config_base, ca->slot_info[slot].config_option); // success! return 0; } /** * Set CAM's configoption correctly. * * @param ca CA instance. * @param slot Slot containing the CAM. */ static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot) { int configoption; dprintk("%s\n", __func__); /* set the config option */ ca->pub->write_attribute_mem(ca->pub, slot, ca->slot_info[slot].config_base, ca->slot_info[slot].config_option); /* check it */ configoption = ca->pub->read_attribute_mem(ca->pub, slot, ca->slot_info[slot].config_base); dprintk("Set configoption 0x%x, read configoption 0x%x\n", ca->slot_info[slot].config_option, configoption & 0x3f); /* fine! */ return 0; } /** * This function talks to an EN50221 CAM control interface. It reads a buffer of * data from the CAM. The data can either be stored in a supplied buffer, or * automatically be added to the slot's rx_buffer. * * @param ca CA instance. * @param slot Slot to read from. * @param ebuf If non-NULL, the data will be written to this buffer. If NULL, * the data will be added into the buffering system as a normal fragment. * @param ecount Size of ebuf. Ignored if ebuf is NULL. * * @return Number of bytes read, or < 0 on error */ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot, u8 * ebuf, int ecount) { int bytes_read; int status; u8 buf[HOST_LINK_BUF_SIZE]; int i; dprintk("%s\n", __func__); /* check if we have space for a link buf in the rx_buffer */ if (ebuf == NULL) { int buf_free; if (ca->slot_info[slot].rx_buffer.data == NULL) { status = -EIO; goto exit; } buf_free = dvb_ringbuffer_free(&ca->slot_info[slot].rx_buffer); if (buf_free < (ca->slot_info[slot].link_buf_size + DVB_RINGBUFFER_PKTHDRSIZE)) { status = -EAGAIN; goto exit; } } /* check if there is data available */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exit; if (!(status & STATUSREG_DA)) { /* no data */ status = 0; goto exit; } /* read the amount of data */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH)) < 0) goto exit; bytes_read = status << 8; if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW)) < 0) goto exit; bytes_read |= status; /* check it will fit */ if (ebuf == NULL) { if (bytes_read > ca->slot_info[slot].link_buf_size) { printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the link buffer size (%i > %i)!\n", ca->dvbdev->adapter->num, bytes_read, ca->slot_info[slot].link_buf_size); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; status = -EIO; goto exit; } if (bytes_read < 2) { printk("dvb_ca adapter %d: CAM sent a buffer that was less than 2 bytes!\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; status = -EIO; goto exit; } } else { if (bytes_read > ecount) { printk("dvb_ca adapter %d: CAM tried to send a buffer larger than the ecount size!\n", ca->dvbdev->adapter->num); status = -EIO; goto exit; } } /* fill the buffer */ for (i = 0; i < bytes_read; i++) { /* read byte and check */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_DATA)) < 0) goto exit; /* OK, store it in the buffer */ buf[i] = status; } /* check for read error (RE should now be 0) */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exit; if (status & STATUSREG_RE) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; status = -EIO; goto exit; } /* OK, add it to the receive buffer, or copy into external buffer if supplied */ if (ebuf == NULL) { if (ca->slot_info[slot].rx_buffer.data == NULL) { status = -EIO; goto exit; } dvb_ringbuffer_pkt_write(&ca->slot_info[slot].rx_buffer, buf, bytes_read); } else { memcpy(ebuf, buf, bytes_read); } dprintk("Received CA packet for slot %i connection id 0x%x last_frag:%i size:0x%x\n", slot, buf[0], (buf[1] & 0x80) == 0, bytes_read); /* wake up readers when a last_fragment is received */ if ((buf[1] & 0x80) == 0x00) { wake_up_interruptible(&ca->wait_queue); } status = bytes_read; exit: return status; } /** * This function talks to an EN50221 CAM control interface. It writes a buffer of data * to a CAM. * * @param ca CA instance. * @param slot Slot to write to. * @param ebuf The data in this buffer is treated as a complete link-level packet to * be written. * @param count Size of ebuf. * * @return Number of bytes written, or < 0 on error. */ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot, u8 * buf, int bytes_write) { int status; int i; dprintk("%s\n", __func__); /* sanity check */ if (bytes_write > ca->slot_info[slot].link_buf_size) return -EINVAL; /* it is possible we are dealing with a single buffer implementation, thus if there is data available for read or if there is even a read already in progress, we do nothing but awake the kernel thread to process the data if necessary. */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exitnowrite; if (status & (STATUSREG_DA | STATUSREG_RE)) { if (status & STATUSREG_DA) dvb_ca_en50221_thread_wakeup(ca); status = -EAGAIN; goto exitnowrite; } /* OK, set HC bit */ if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN | CMDREG_HC)) != 0) goto exit; /* check if interface is still free */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exit; if (!(status & STATUSREG_FR)) { /* it wasn't free => try again later */ status = -EAGAIN; goto exit; } /* send the amount of data */ if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0) goto exit; if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW, bytes_write & 0xff)) != 0) goto exit; /* send the buffer */ for (i = 0; i < bytes_write; i++) { if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_DATA, buf[i])) != 0) goto exit; } /* check for write error (WE should now be 0) */ if ((status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS)) < 0) goto exit; if (status & STATUSREG_WE) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; status = -EIO; goto exit; } status = bytes_write; dprintk("Wrote CA packet for slot %i, connection id 0x%x last_frag:%i size:0x%x\n", slot, buf[0], (buf[1] & 0x80) == 0, bytes_write); exit: ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, IRQEN); exitnowrite: return status; } EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq); /* ******************************************************************************** */ /* EN50221 higher level functions */ /** * A CAM has been removed => shut it down. * * @param ca CA instance. * @param slot Slot to shut down. */ static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot) { dprintk("%s\n", __func__); ca->pub->slot_shutdown(ca->pub, slot); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; /* need to wake up all processes to check if they're now trying to write to a defunct CAM */ wake_up_interruptible(&ca->wait_queue); dprintk("Slot %i shutdown\n", slot); /* success */ return 0; } EXPORT_SYMBOL(dvb_ca_en50221_camready_irq); /** * A CAMCHANGE IRQ has occurred. * * @param ca CA instance. * @param slot Slot concerned. * @param change_type One of the DVB_CA_CAMCHANGE_* values. */ void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, int change_type) { struct dvb_ca_private *ca = pubca->private; dprintk("CAMCHANGE IRQ slot:%i change_type:%i\n", slot, change_type); switch (change_type) { case DVB_CA_EN50221_CAMCHANGE_REMOVED: case DVB_CA_EN50221_CAMCHANGE_INSERTED: break; default: return; } ca->slot_info[slot].camchange_type = change_type; atomic_inc(&ca->slot_info[slot].camchange_count); dvb_ca_en50221_thread_wakeup(ca); } EXPORT_SYMBOL(dvb_ca_en50221_frda_irq); /** * A CAMREADY IRQ has occurred. * * @param ca CA instance. * @param slot Slot concerned. */ void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot) { struct dvb_ca_private *ca = pubca->private; dprintk("CAMREADY IRQ slot:%i\n", slot); if (ca->slot_info[slot].slot_state == DVB_CA_SLOTSTATE_WAITREADY) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_VALIDATE; dvb_ca_en50221_thread_wakeup(ca); } } /** * An FR or DA IRQ has occurred. * * @param ca CA instance. * @param slot Slot concerned. */ void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot) { struct dvb_ca_private *ca = pubca->private; int flags; dprintk("FR/DA IRQ slot:%i\n", slot); switch (ca->slot_info[slot].slot_state) { case DVB_CA_SLOTSTATE_LINKINIT: flags = ca->pub->read_cam_control(pubca, slot, CTRLIF_STATUS); if (flags & STATUSREG_DA) { dprintk("CAM supports DA IRQ\n"); ca->slot_info[slot].da_irq_supported = 1; } break; case DVB_CA_SLOTSTATE_RUNNING: if (ca->open) dvb_ca_en50221_thread_wakeup(ca); break; } } /* ******************************************************************************** */ /* EN50221 thread functions */ /** * Wake up the DVB CA thread * * @param ca CA instance. */ static void dvb_ca_en50221_thread_wakeup(struct dvb_ca_private *ca) { dprintk("%s\n", __func__); ca->wakeup = 1; mb(); wake_up_process(ca->thread); } /** * Update the delay used by the thread. * * @param ca CA instance. */ static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca) { int delay; int curdelay = 100000000; int slot; /* Beware of too high polling frequency, because one polling * call might take several hundred milliseconds until timeout! */ for (slot = 0; slot < ca->slot_count; slot++) { switch (ca->slot_info[slot].slot_state) { default: case DVB_CA_SLOTSTATE_NONE: delay = HZ * 60; /* 60s */ if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) delay = HZ * 5; /* 5s */ break; case DVB_CA_SLOTSTATE_INVALID: delay = HZ * 60; /* 60s */ if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) delay = HZ / 10; /* 100ms */ break; case DVB_CA_SLOTSTATE_UNINITIALISED: case DVB_CA_SLOTSTATE_WAITREADY: case DVB_CA_SLOTSTATE_VALIDATE: case DVB_CA_SLOTSTATE_WAITFR: case DVB_CA_SLOTSTATE_LINKINIT: delay = HZ / 10; /* 100ms */ break; case DVB_CA_SLOTSTATE_RUNNING: delay = HZ * 60; /* 60s */ if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) delay = HZ / 10; /* 100ms */ if (ca->open) { if ((!ca->slot_info[slot].da_irq_supported) || (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA))) delay = HZ / 10; /* 100ms */ } break; } if (delay < curdelay) curdelay = delay; } ca->delay = curdelay; } /** * Kernel thread which monitors CA slots for CAM changes, and performs data transfers. */ static int dvb_ca_en50221_thread(void *data) { struct dvb_ca_private *ca = data; int slot; int flags; int status; int pktcount; void *rxbuf; dprintk("%s\n", __func__); /* choose the correct initial delay */ dvb_ca_en50221_thread_update_delay(ca); /* main loop */ while (!kthread_should_stop()) { /* sleep for a bit */ if (!ca->wakeup) { set_current_state(TASK_INTERRUPTIBLE); schedule_timeout(ca->delay); if (kthread_should_stop()) return 0; } ca->wakeup = 0; /* go through all the slots processing them */ for (slot = 0; slot < ca->slot_count; slot++) { mutex_lock(&ca->slot_info[slot].slot_lock); // check the cam status + deal with CAMCHANGEs while (dvb_ca_en50221_check_camstatus(ca, slot)) { /* clear down an old CI slot if necessary */ if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) dvb_ca_en50221_slot_shutdown(ca, slot); /* if a CAM is NOW present, initialise it */ if (ca->slot_info[slot].camchange_type == DVB_CA_EN50221_CAMCHANGE_INSERTED) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_UNINITIALISED; } /* we've handled one CAMCHANGE */ dvb_ca_en50221_thread_update_delay(ca); atomic_dec(&ca->slot_info[slot].camchange_count); } // CAM state machine switch (ca->slot_info[slot].slot_state) { case DVB_CA_SLOTSTATE_NONE: case DVB_CA_SLOTSTATE_INVALID: // no action needed break; case DVB_CA_SLOTSTATE_UNINITIALISED: ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITREADY; ca->pub->slot_reset(ca->pub, slot); ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ); break; case DVB_CA_SLOTSTATE_WAITREADY: if (time_after(jiffies, ca->slot_info[slot].timeout)) { printk("dvb_ca adaptor %d: PC card did not respond :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; } // no other action needed; will automatically change state when ready break; case DVB_CA_SLOTSTATE_VALIDATE: if (dvb_ca_en50221_parse_attributes(ca, slot) != 0) { /* we need this extra check for annoying interfaces like the budget-av */ if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && (ca->pub->poll_slot_status)) { status = ca->pub->poll_slot_status(ca->pub, slot, 0); if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; dvb_ca_en50221_thread_update_delay(ca); break; } } printk("dvb_ca adapter %d: Invalid PC card inserted :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; } if (dvb_ca_en50221_set_configoption(ca, slot) != 0) { printk("dvb_ca adapter %d: Unable to initialise CAM :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; } if (ca->pub->write_cam_control(ca->pub, slot, CTRLIF_COMMAND, CMDREG_RS) != 0) { printk("dvb_ca adapter %d: Unable to reset CAM IF\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; } dprintk("DVB CAM validated successfully\n"); ca->slot_info[slot].timeout = jiffies + (INIT_TIMEOUT_SECS * HZ); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_WAITFR; ca->wakeup = 1; break; case DVB_CA_SLOTSTATE_WAITFR: if (time_after(jiffies, ca->slot_info[slot].timeout)) { printk("dvb_ca adapter %d: DVB CAM did not respond :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; } flags = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); if (flags & STATUSREG_FR) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_LINKINIT; ca->wakeup = 1; } break; case DVB_CA_SLOTSTATE_LINKINIT: if (dvb_ca_en50221_link_init(ca, slot) != 0) { /* we need this extra check for annoying interfaces like the budget-av */ if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) && (ca->pub->poll_slot_status)) { status = ca->pub->poll_slot_status(ca->pub, slot, 0); if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) { ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE; dvb_ca_en50221_thread_update_delay(ca); break; } } printk("dvb_ca adapter %d: DVB CAM link initialisation failed :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; } if (ca->slot_info[slot].rx_buffer.data == NULL) { rxbuf = vmalloc(RX_BUFFER_SIZE); if (rxbuf == NULL) { printk("dvb_ca adapter %d: Unable to allocate CAM rx buffer :(\n", ca->dvbdev->adapter->num); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_INVALID; dvb_ca_en50221_thread_update_delay(ca); break; } dvb_ringbuffer_init(&ca->slot_info[slot].rx_buffer, rxbuf, RX_BUFFER_SIZE); } ca->pub->slot_ts_enable(ca->pub, slot); ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_RUNNING; dvb_ca_en50221_thread_update_delay(ca); printk("dvb_ca adapter %d: DVB CAM detected and initialised successfully\n", ca->dvbdev->adapter->num); break; case DVB_CA_SLOTSTATE_RUNNING: if (!ca->open) break; // poll slots for data pktcount = 0; while ((status = dvb_ca_en50221_read_data(ca, slot, NULL, 0)) > 0) { if (!ca->open) break; /* if a CAMCHANGE occurred at some point, do not do any more processing of this slot */ if (dvb_ca_en50221_check_camstatus(ca, slot)) { // we dont want to sleep on the next iteration so we can handle the cam change ca->wakeup = 1; break; } /* check if we've hit our limit this time */ if (++pktcount >= MAX_RX_PACKETS_PER_ITERATION) { // dont sleep; there is likely to be more data to read ca->wakeup = 1; break; } } break; } mutex_unlock(&ca->slot_info[slot].slot_lock); } } return 0; } /* ******************************************************************************** */ /* EN50221 IO interface functions */ /** * Real ioctl implementation. * NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them. * * @param inode Inode concerned. * @param file File concerned. * @param cmd IOCTL command. * @param arg Associated argument. * * @return 0 on success, <0 on error. */ static int dvb_ca_en50221_io_do_ioctl(struct file *file, unsigned int cmd, void *parg) { struct dvb_device *dvbdev = file->private_data; struct dvb_ca_private *ca = dvbdev->priv; int err = 0; int slot; dprintk("%s\n", __func__); switch (cmd) { case CA_RESET: for (slot = 0; slot < ca->slot_count; slot++) { mutex_lock(&ca->slot_info[slot].slot_lock); if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_NONE) { dvb_ca_en50221_slot_shutdown(ca, slot); if (ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE) dvb_ca_en50221_camchange_irq(ca->pub, slot, DVB_CA_EN50221_CAMCHANGE_INSERTED); } mutex_unlock(&ca->slot_info[slot].slot_lock); } ca->next_read_slot = 0; dvb_ca_en50221_thread_wakeup(ca); break; case CA_GET_CAP: { struct ca_caps *caps = parg; caps->slot_num = ca->slot_count; caps->slot_type = CA_CI_LINK; caps->descr_num = 0; caps->descr_type = 0; break; } case CA_GET_SLOT_INFO: { struct ca_slot_info *info = parg; if ((info->num > ca->slot_count) || (info->num < 0)) return -EINVAL; info->type = CA_CI_LINK; info->flags = 0; if ((ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_NONE) && (ca->slot_info[info->num].slot_state != DVB_CA_SLOTSTATE_INVALID)) { info->flags = CA_CI_MODULE_PRESENT; } if (ca->slot_info[info->num].slot_state == DVB_CA_SLOTSTATE_RUNNING) { info->flags |= CA_CI_MODULE_READY; } break; } default: err = -EINVAL; break; } return err; } /** * Wrapper for ioctl implementation. * * @param inode Inode concerned. * @param file File concerned. * @param cmd IOCTL command. * @param arg Associated argument. * * @return 0 on success, <0 on error. */ static long dvb_ca_en50221_io_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { return dvb_usercopy(file, cmd, arg, dvb_ca_en50221_io_do_ioctl); } /** * Implementation of write() syscall. * * @param file File structure. * @param buf Source buffer. * @param count Size of source buffer. * @param ppos Position in file (ignored). * * @return Number of bytes read, or <0 on error. */ static ssize_t dvb_ca_en50221_io_write(struct file *file, const char __user * buf, size_t count, loff_t * ppos) { struct dvb_device *dvbdev = file->private_data; struct dvb_ca_private *ca = dvbdev->priv; u8 slot, connection_id; int status; u8 fragbuf[HOST_LINK_BUF_SIZE]; int fragpos = 0; int fraglen; unsigned long timeout; int written; dprintk("%s\n", __func__); /* Incoming packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */ if (count < 2) return -EINVAL; /* extract slot & connection id */ if (copy_from_user(&slot, buf, 1)) return -EFAULT; if (copy_from_user(&connection_id, buf + 1, 1)) return -EFAULT; buf += 2; count -= 2; /* check if the slot is actually running */ if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) return -EINVAL; /* fragment the packets & store in the buffer */ while (fragpos < count) { fraglen = ca->slot_info[slot].link_buf_size - 2; if (fraglen < 0) break; if (fraglen > HOST_LINK_BUF_SIZE - 2) fraglen = HOST_LINK_BUF_SIZE - 2; if ((count - fragpos) < fraglen) fraglen = count - fragpos; fragbuf[0] = connection_id; fragbuf[1] = ((fragpos + fraglen) < count) ? 0x80 : 0x00; status = copy_from_user(fragbuf + 2, buf + fragpos, fraglen); if (status) { status = -EFAULT; goto exit; } timeout = jiffies + HZ / 2; written = 0; while (!time_after(jiffies, timeout)) { /* check the CAM hasn't been removed/reset in the meantime */ if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) { status = -EIO; goto exit; } mutex_lock(&ca->slot_info[slot].slot_lock); status = dvb_ca_en50221_write_data(ca, slot, fragbuf, fraglen + 2); mutex_unlock(&ca->slot_info[slot].slot_lock); if (status == (fraglen + 2)) { written = 1; break; } if (status != -EAGAIN) goto exit; msleep(1); } if (!written) { status = -EIO; goto exit; } fragpos += fraglen; } status = count + 2; exit: return status; } /** * Condition for waking up in dvb_ca_en50221_io_read_condition */ static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca, int *result, int *_slot) { int slot; int slot_count = 0; int idx; size_t fraglen; int connection_id = -1; int found = 0; u8 hdr[2]; slot = ca->next_read_slot; while ((slot_count < ca->slot_count) && (!found)) { if (ca->slot_info[slot].slot_state != DVB_CA_SLOTSTATE_RUNNING) goto nextslot; if (ca->slot_info[slot].rx_buffer.data == NULL) { return 0; } idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen); while (idx != -1) { dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2); if (connection_id == -1) connection_id = hdr[0]; if ((hdr[0] == connection_id) && ((hdr[1] & 0x80) == 0)) { *_slot = slot; found = 1; break; } idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen); } nextslot: slot = (slot + 1) % ca->slot_count; slot_count++; } ca->next_read_slot = slot; return found; } /** * Implementation of read() syscall. * * @param file File structure. * @param buf Destination buffer. * @param count Size of destination buffer. * @param ppos Position in file (ignored). * * @return Number of bytes read, or <0 on error. */ static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user * buf, size_t count, loff_t * ppos) { struct dvb_device *dvbdev = file->private_data; struct dvb_ca_private *ca = dvbdev->priv; int status; int result = 0; u8 hdr[2]; int slot; int connection_id = -1; size_t idx, idx2; int last_fragment = 0; size_t fraglen; int pktlen; int dispose = 0; dprintk("%s\n", __func__); /* Outgoing packet has a 2 byte header. hdr[0] = slot_id, hdr[1] = connection_id */ if (count < 2) return -EINVAL; /* wait for some data */ if ((status = dvb_ca_en50221_io_read_condition(ca, &result, &slot)) == 0) { /* if we're in nonblocking mode, exit immediately */ if (file->f_flags & O_NONBLOCK) return -EWOULDBLOCK; /* wait for some data */ status = wait_event_interruptible(ca->wait_queue, dvb_ca_en50221_io_read_condition (ca, &result, &slot)); } if ((status < 0) || (result < 0)) { if (result) return result; return status; } idx = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, -1, &fraglen); pktlen = 2; do { if (idx == -1) { printk("dvb_ca adapter %d: BUG: read packet ended before last_fragment encountered\n", ca->dvbdev->adapter->num); status = -EIO; goto exit; } dvb_ringbuffer_pkt_read(&ca->slot_info[slot].rx_buffer, idx, 0, hdr, 2); if (connection_id == -1) connection_id = hdr[0]; if (hdr[0] == connection_id) { if (pktlen < count) { if ((pktlen + fraglen - 2) > count) { fraglen = count - pktlen; } else { fraglen -= 2; } if ((status = dvb_ringbuffer_pkt_read_user(&ca->slot_info[slot].rx_buffer, idx, 2, buf + pktlen, fraglen)) < 0) { goto exit; } pktlen += fraglen; } if ((hdr[1] & 0x80) == 0) last_fragment = 1; dispose = 1; } idx2 = dvb_ringbuffer_pkt_next(&ca->slot_info[slot].rx_buffer, idx, &fraglen); if (dispose) dvb_ringbuffer_pkt_dispose(&ca->slot_info[slot].rx_buffer, idx); idx = idx2; dispose = 0; } while (!last_fragment); hdr[0] = slot; hdr[1] = connection_id; status = copy_to_user(buf, hdr, 2); if (status) { status = -EFAULT; goto exit; } status = pktlen; exit: return status; } /** * Implementation of file open syscall. * * @param inode Inode concerned. * @param file File concerned. * * @return 0 on success, <0 on failure. */ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file) { struct dvb_device *dvbdev = file->private_data; struct dvb_ca_private *ca = dvbdev->priv; int err; int i; dprintk("%s\n", __func__); if (!try_module_get(ca->pub->owner)) return -EIO; err = dvb_generic_open(inode, file); if (err < 0) { module_put(ca->pub->owner); return err; } for (i = 0; i < ca->slot_count; i++) { if (ca->slot_info[i].slot_state == DVB_CA_SLOTSTATE_RUNNING) { if (ca->slot_info[i].rx_buffer.data != NULL) { /* it is safe to call this here without locks because * ca->open == 0. Data is not read in this case */ dvb_ringbuffer_flush(&ca->slot_info[i].rx_buffer); } } } ca->open = 1; dvb_ca_en50221_thread_update_delay(ca); dvb_ca_en50221_thread_wakeup(ca); return 0; } /** * Implementation of file close syscall. * * @param inode Inode concerned. * @param file File concerned. * * @return 0 on success, <0 on failure. */ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file) { struct dvb_device *dvbdev = file->private_data; struct dvb_ca_private *ca = dvbdev->priv; int err; dprintk("%s\n", __func__); /* mark the CA device as closed */ ca->open = 0; dvb_ca_en50221_thread_update_delay(ca); err = dvb_generic_release(inode, file); module_put(ca->pub->owner); return err; } /** * Implementation of poll() syscall. * * @param file File concerned. * @param wait poll wait table. * * @return Standard poll mask. */ static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table * wait) { struct dvb_device *dvbdev = file->private_data; struct dvb_ca_private *ca = dvbdev->priv; unsigned int mask = 0; int slot; int result = 0; dprintk("%s\n", __func__); if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) { mask |= POLLIN; } /* if there is something, return now */ if (mask) return mask; /* wait for something to happen */ poll_wait(file, &ca->wait_queue, wait); if (dvb_ca_en50221_io_read_condition(ca, &result, &slot) == 1) { mask |= POLLIN; } return mask; } EXPORT_SYMBOL(dvb_ca_en50221_init); static const struct file_operations dvb_ca_fops = { .owner = THIS_MODULE, .read = dvb_ca_en50221_io_read, .write = dvb_ca_en50221_io_write, .unlocked_ioctl = dvb_ca_en50221_io_ioctl, .open = dvb_ca_en50221_io_open, .release = dvb_ca_en50221_io_release, .poll = dvb_ca_en50221_io_poll, .llseek = noop_llseek, }; static struct dvb_device dvbdev_ca = { .priv = NULL, .users = 1, .readers = 1, .writers = 1, .fops = &dvb_ca_fops, }; /* ******************************************************************************** */ /* Initialisation/shutdown functions */ /** * Initialise a new DVB CA EN50221 interface device. * * @param dvb_adapter DVB adapter to attach the new CA device to. * @param ca The dvb_ca instance. * @param flags Flags describing the CA device (DVB_CA_FLAG_*). * @param slot_count Number of slots supported. * * @return 0 on success, nonzero on failure */ int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, struct dvb_ca_en50221 *pubca, int flags, int slot_count) { int ret; struct dvb_ca_private *ca = NULL; int i; dprintk("%s\n", __func__); if (slot_count < 1) return -EINVAL; /* initialise the system data */ if ((ca = kzalloc(sizeof(struct dvb_ca_private), GFP_KERNEL)) == NULL) { ret = -ENOMEM; goto error; } ca->pub = pubca; ca->flags = flags; ca->slot_count = slot_count; if ((ca->slot_info = kcalloc(slot_count, sizeof(struct dvb_ca_slot), GFP_KERNEL)) == NULL) { ret = -ENOMEM; goto error; } init_waitqueue_head(&ca->wait_queue); ca->open = 0; ca->wakeup = 0; ca->next_read_slot = 0; pubca->private = ca; /* register the DVB device */ ret = dvb_register_device(dvb_adapter, &ca->dvbdev, &dvbdev_ca, ca, DVB_DEVICE_CA); if (ret) goto error; /* now initialise each slot */ for (i = 0; i < slot_count; i++) { memset(&ca->slot_info[i], 0, sizeof(struct dvb_ca_slot)); ca->slot_info[i].slot_state = DVB_CA_SLOTSTATE_NONE; atomic_set(&ca->slot_info[i].camchange_count, 0); ca->slot_info[i].camchange_type = DVB_CA_EN50221_CAMCHANGE_REMOVED; mutex_init(&ca->slot_info[i].slot_lock); } if (signal_pending(current)) { ret = -EINTR; goto error; } mb(); /* create a kthread for monitoring this CA device */ ca->thread = kthread_run(dvb_ca_en50221_thread, ca, "kdvb-ca-%i:%i", ca->dvbdev->adapter->num, ca->dvbdev->id); if (IS_ERR(ca->thread)) { ret = PTR_ERR(ca->thread); printk("dvb_ca_init: failed to start kernel_thread (%d)\n", ret); goto error; } return 0; error: if (ca != NULL) { if (ca->dvbdev != NULL) dvb_unregister_device(ca->dvbdev); kfree(ca->slot_info); kfree(ca); } pubca->private = NULL; return ret; } EXPORT_SYMBOL(dvb_ca_en50221_release); /** * Release a DVB CA EN50221 interface device. * * @param ca_dev The dvb_device_t instance for the CA device. * @param ca The associated dvb_ca instance. */ void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca) { struct dvb_ca_private *ca = pubca->private; int i; dprintk("%s\n", __func__); /* shutdown the thread if there was one */ kthread_stop(ca->thread); for (i = 0; i < ca->slot_count; i++) { dvb_ca_en50221_slot_shutdown(ca, i); vfree(ca->slot_info[i].rx_buffer.data); } kfree(ca->slot_info); dvb_unregister_device(ca->dvbdev); kfree(ca); pubca->private = NULL; }