/*
* SDIO host client driver interface of Broadcom HNBU
* export functions to client drivers
* abstract OS and BUS specific details of SDIO
*
* Copyright (C) 1999-2012, Broadcom Corporation
*
* Unless you and Broadcom execute a separate written software license
* agreement governing use of this software, this software is licensed to you
* under the terms of the GNU General Public License version 2 (the "GPL"),
* available at http://www.broadcom.com/licenses/GPLv2.php, with the
* following added to such license:
*
* As a special exception, the copyright holders of this software give you
* permission to link this software with independent modules, and to copy and
* distribute the resulting executable under terms of your choice, provided that
* you also meet, for each linked independent module, the terms and conditions of
* the license of that module. An independent module is a module which is not
* derived from this software. The special exception does not apply to any
* modifications of the software.
*
* Notwithstanding the above, under no circumstances may you combine this
* software in any way with any other Broadcom software provided under a license
* other than the GPL, without Broadcom's express prior written consent.
*
* $Id: bcmsdh.h 309548 2012-01-20 01:13:08Z $
*/
/**
* @file bcmsdh.h
*/
#ifndef _bcmsdh_h_
#define _bcmsdh_h_
#define BCMSDH_ERROR_VAL 0x0001 /* Error */
#define BCMSDH_INFO_VAL 0x0002 /* Info */
extern const uint bcmsdh_msglevel;
#define BCMSDH_ERROR(x)
#define BCMSDH_INFO(x)
#if (defined(BCMSDIOH_STD) || defined(BCMSDIOH_BCM) || defined(BCMSDIOH_SPI))
#define BCMSDH_ADAPTER
#endif /* BCMSDIO && (BCMSDIOH_STD || BCMSDIOH_BCM || BCMSDIOH_SPI) */
/* forward declarations */
typedef struct bcmsdh_info bcmsdh_info_t;
typedef void (*bcmsdh_cb_fn_t)(void *);
/* Attach and build an interface to the underlying SD host driver.
* - Allocates resources (structs, arrays, mem, OS handles, etc) needed by bcmsdh.
* - Returns the bcmsdh handle and virtual address base for register access.
* The returned handle should be used in all subsequent calls, but the bcmsh
* implementation may maintain a single "default" handle (e.g. the first or
* most recent one) to enable single-instance implementations to pass NULL.
*/
extern bcmsdh_info_t *bcmsdh_attach(osl_t *osh, void *cfghdl, void **regsva, uint irq);
/* Detach - freeup resources allocated in attach */
extern int bcmsdh_detach(osl_t *osh, void *sdh);
/* Query if SD device interrupts are enabled */
extern bool bcmsdh_intr_query(void *sdh);
/* Enable/disable SD interrupt */
extern int bcmsdh_intr_enable(void *sdh);
extern int bcmsdh_intr_disable(void *sdh);
/* Register/deregister device interrupt handler. */
extern int bcmsdh_intr_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh);
extern int bcmsdh_intr_dereg(void *sdh);
#if defined(DHD_DEBUG)
/* Query pending interrupt status from the host controller */
extern bool bcmsdh_intr_pending(void *sdh);
#endif
/* Register a callback to be called if and when bcmsdh detects
* device removal. No-op in the case of non-removable/hardwired devices.
*/
extern int bcmsdh_devremove_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh);
/* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
* fn: function number
* addr: unmodified SDIO-space address
* data: data byte to write
* err: pointer to error code (or NULL)
*/
extern uint8 bcmsdh_cfg_read(void *sdh, uint func, uint32 addr, int *err);
extern void bcmsdh_cfg_write(void *sdh, uint func, uint32 addr, uint8 data, int *err);
/* Read/Write 4bytes from/to cfg space */
extern uint32 bcmsdh_cfg_read_word(void *sdh, uint fnc_num, uint32 addr, int *err);
extern void bcmsdh_cfg_write_word(void *sdh, uint fnc_num, uint32 addr, uint32 data, int *err);
/* Read CIS content for specified function.
* fn: function whose CIS is being requested (0 is common CIS)
* cis: pointer to memory location to place results
* length: number of bytes to read
* Internally, this routine uses the values from the cis base regs (0x9-0xB)
* to form an SDIO-space address to read the data from.
*/
extern int bcmsdh_cis_read(void *sdh, uint func, uint8 *cis, uint length);
/* Synchronous access to device (client) core registers via CMD53 to F1.
* addr: backplane address (i.e. >= regsva from attach)
* size: register width in bytes (2 or 4)
* data: data for register write
*/
extern uint32 bcmsdh_reg_read(void *sdh, uint32 addr, uint size);
extern uint32 bcmsdh_reg_write(void *sdh, uint32 addr, uint size, uint32 data);
/* set sb address window */
extern int bcmsdhsdio_set_sbaddr_window(void *sdh, uint32 address, bool force_set);
/* Indicate if last reg read/write failed */
extern bool bcmsdh_regfail(void *sdh);
/* Buffer transfer to/from device (client) core via cmd53.
* fn: function number
* addr: backplane address (i.e. >= regsva from attach)
* flags: backplane width, address increment, sync/async
* buf: pointer to memory data buffer
* nbytes: number of bytes to transfer to/from buf
* pkt: pointer to packet associated with buf (if any)
* complete: callback function for command completion (async only)
* handle: handle for completion callback (first arg in callback)
* Returns 0 or error code.
* NOTE: Async operation is not currently supported.
*/
typedef void (*bcmsdh_cmplt_fn_t)(void *handle, int status, bool sync_waiting);
extern int bcmsdh_send_buf(void *sdh, uint32 addr, uint fn, uint flags,
uint8 *buf, uint nbytes, void *pkt,
bcmsdh_cmplt_fn_t complete_fn, void *handle);
extern int bcmsdh_recv_buf(void *sdh, uint32 addr, uint fn, uint flags,
uint8 *buf, uint nbytes, void *pkt,
bcmsdh_cmplt_fn_t complete_fn, void *handle);
/* Flags bits */
#define SDIO_REQ_4BYTE 0x1 /* Four-byte target (backplane) width (vs. two-byte) */
#define SDIO_REQ_FIXED 0x2 /* Fixed address (FIFO) (vs. incrementing address) */
#define SDIO_REQ_ASYNC 0x4 /* Async request (vs. sync request) */
#define SDIO_BYTE_MODE 0x8 /* Byte mode request(non-block mode) */
/* Pending (non-error) return code */
#define BCME_PENDING 1
/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
* rw: read or write (0/1)
* addr: direct SDIO address
* buf: pointer to memory data buffer
* nbytes: number of bytes to transfer to/from buf
* Returns 0 or error code.
*/
extern int bcmsdh_rwdata(void *sdh, uint rw, uint32 addr, uint8 *buf, uint nbytes);
/* Issue an abort to the specified function */
extern int bcmsdh_abort(void *sdh, uint fn);
/* Start SDIO Host Controller communication */
extern int bcmsdh_start(void *sdh, int stage);
/* Stop SDIO Host Controller communication */
extern int bcmsdh_stop(void *sdh);
/* Wait system lock free */
extern int bcmsdh_waitlockfree(void *sdh);
/* Returns the "Device ID" of target device on the SDIO bus. */
extern int bcmsdh_query_device(void *sdh);
/* Returns the number of IO functions reported by the device */
extern uint bcmsdh_query_iofnum(void *sdh);
/* Miscellaneous knob tweaker. */
extern int bcmsdh_iovar_op(void *sdh, const char *name,
void *params, int plen, void *arg, int len, bool set);
/* Reset and reinitialize the device */
extern int bcmsdh_reset(bcmsdh_info_t *sdh);
/* helper functions */
extern void *bcmsdh_get_sdioh(bcmsdh_info_t *sdh);
/* callback functions */
typedef struct {
/* attach to device */
void *(*attach)(uint16 vend_id, uint16 dev_id, uint16 bus, uint16 slot,
uint16 func, uint bustype, void * regsva, osl_t * osh,
void * param);
/* detach from device */
void (*detach)(void *ch);
} bcmsdh_driver_t;
/* platform specific/high level functions */
extern int bcmsdh_register(bcmsdh_driver_t *driver);
extern void bcmsdh_unregister(void);
extern bool bcmsdh_chipmatch(uint16 vendor, uint16 device);
extern void bcmsdh_device_remove(void * sdh);
extern int bcmsdh_reg_sdio_notify(void* semaphore);
extern void bcmsdh_unreg_sdio_notify(void);
#if defined(OOB_INTR_ONLY)
extern int bcmsdh_register_oob_intr(void * dhdp);
extern void bcmsdh_unregister_oob_intr(void);
extern void bcmsdh_oob_intr_set(bool enable);
#endif /* defined(OOB_INTR_ONLY) */
/* Function to pass device-status bits to DHD. */
extern uint32 bcmsdh_get_dstatus(void *sdh);
/* Function to return current window addr */
extern uint32 bcmsdh_cur_sbwad(void *sdh);
/* Function to pass chipid and rev to lower layers for controlling pr's */
extern void bcmsdh_chipinfo(void *sdh, uint32 chip, uint32 chiprev);
extern int bcmsdh_sleep(void *sdh, bool enab);
/* GPIO support */
extern int bcmsdh_gpio_init(void *sd);
extern bool bcmsdh_gpioin(void *sd, uint32 gpio);
extern int bcmsdh_gpioouten(void *sd, uint32 gpio);
extern int bcmsdh_gpioout(void *sd, uint32 gpio, bool enab);
#endif /* _bcmsdh_h_ */