config IWLEGACY tristate select FW_LOADER select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGERS select MAC80211_LEDS menu "Debugging Options" depends on IWLEGACY config IWLEGACY_DEBUG bool "Enable full debugging output in iwlegacy (iwl 3945/4965) drivers" depends on IWLEGACY ---help--- This option will enable debug tracing output for the iwlegacy drivers. This will result in the kernel module being ~100k larger. You can control which debug output is sent to the kernel log by setting the value in /sys/class/net/wlan0/device/debug_level This entry will only exist if this option is enabled. To set a value, simply echo an 8-byte hex value to the same file: % echo 0x43fff > /sys/class/net/wlan0/device/debug_level You can find the list of debug mask values in: drivers/net/wireless/iwlegacy/common.h If this is your first time using this driver, you should say Y here as the debug information can assist others in helping you resolve any problems you may encounter. config IWLEGACY_DEBUGFS bool "iwlegacy (iwl 3945/4965) debugfs support" depends on IWLEGACY && MAC80211_DEBUGFS ---help--- Enable creation of debugfs files for the iwlegacy drivers. This is a low-impact option that allows getting insight into the driver's state at runtime. endmenu config IWL4965 tristate "Intel Wireless WiFi 4965AGN (iwl4965)" depends on PCI && MAC80211 select IWLEGACY ---help--- This option enables support for Select to build the driver supporting the: Intel Wireless WiFi Link 4965AGN This driver uses the kernel's mac80211 subsystem. In order to use this driver, you will need a microcode (uCode) image for it. You can obtain the microcode from: <http://intellinuxwireless.org/>. The microcode is typically installed in /lib/firmware. You can look in the hotplug script /etc/hotplug/firmware.agent to determine which directory FIRMWARE_DIR is set to when the script runs. If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read <file:Documentation/kbuild/modules.txt>. The module will be called iwl4965. config IWL3945 tristate "Intel PRO/Wireless 3945ABG/BG Network Connection (iwl3945)" depends on PCI && MAC80211 select IWLEGACY ---help--- Select to build the driver supporting the: Intel PRO/Wireless 3945ABG/BG Network Connection This driver uses the kernel's mac80211 subsystem. In order to use this driver, you will need a microcode (uCode) image for it. You can obtain the microcode from: <http://intellinuxwireless.org/>. The microcode is typically installed in /lib/firmware. You can look in the hotplug script /etc/hotplug/firmware.agent to determine which directory FIRMWARE_DIR is set to when the script runs. If you want to compile the driver as a module ( = code which can be inserted in and removed from the running kernel whenever you want), say M here and read <file:Documentation/kbuild/modules.txt>. The module will be called iwl3945.