- 根目录:
- drivers
- media
- radio
- radio-typhoon.c
/* Typhoon Radio Card driver for radio support
* (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de>
*
* Notes on the hardware
*
* This card has two output sockets, one for speakers and one for line.
* The speaker output has volume control, but only in four discrete
* steps. The line output has neither volume control nor mute.
*
* The card has auto-stereo according to its manual, although it all
* sounds mono to me (even with the Win/DOS drivers). Maybe it's my
* antenna - I really don't know for sure.
*
* Frequency control is done digitally.
*
* Volume control is done digitally, but there are only four different
* possible values. So you should better always turn the volume up and
* use line control. I got the best results by connecting line output
* to the sound card microphone input. For such a configuration the
* volume control has no effect, since volume control only influences
* the speaker output.
*
* There is no explicit mute/unmute. So I set the radio frequency to a
* value where I do expect just noise and turn the speaker volume down.
* The frequency change is necessary since the card never seems to be
* completely silent.
*
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
*/
#include <linux/module.h> /* Modules */
#include <linux/init.h> /* Initdata */
#include <linux/ioport.h> /* request_region */
#include <linux/videodev2.h> /* kernel radio structs */
#include <linux/io.h> /* outb, outb_p */
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
#define DRIVER_VERSION "0.1.2"
MODULE_AUTHOR("Dr. Henrik Seidel");
MODULE_DESCRIPTION("A driver for the Typhoon radio card (a.k.a. EcoRadio).");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRIVER_VERSION);
#ifndef CONFIG_RADIO_TYPHOON_PORT
#define CONFIG_RADIO_TYPHOON_PORT -1
#endif
#ifndef CONFIG_RADIO_TYPHOON_MUTEFREQ
#define CONFIG_RADIO_TYPHOON_MUTEFREQ 0
#endif
static int io = CONFIG_RADIO_TYPHOON_PORT;
static int radio_nr = -1;
module_param(io, int, 0);
MODULE_PARM_DESC(io, "I/O address of the Typhoon card (0x316 or 0x336)");
module_param(radio_nr, int, 0);
static unsigned long mutefreq = CONFIG_RADIO_TYPHOON_MUTEFREQ;
module_param(mutefreq, ulong, 0);
MODULE_PARM_DESC(mutefreq, "Frequency used when muting the card (in kHz)");
#define BANNER "Typhoon Radio Card driver v" DRIVER_VERSION "\n"
struct typhoon {
struct v4l2_device v4l2_dev;
struct video_device vdev;
int io;
int curvol;
int muted;
unsigned long curfreq;
unsigned long mutefreq;
struct mutex lock;
};
static struct typhoon typhoon_card;
static void typhoon_setvol_generic(struct typhoon *dev, int vol)
{
mutex_lock(&dev->lock);
vol >>= 14; /* Map 16 bit to 2 bit */
vol &= 3;
outb_p(vol / 2, dev->io); /* Set the volume, high bit. */
outb_p(vol % 2, dev->io + 2); /* Set the volume, low bit. */
mutex_unlock(&dev->lock);
}
static int typhoon_setfreq_generic(struct typhoon *dev,
unsigned long frequency)
{
unsigned long outval;
unsigned long x;
/*
* The frequency transfer curve is not linear. The best fit I could
* get is
*
* outval = -155 + exp((f + 15.55) * 0.057))
*
* where frequency f is in MHz. Since we don't have exp in the kernel,
* I approximate this function by a third order polynomial.
*
*/
mutex_lock(&dev->lock);
x = frequency / 160;
outval = (x * x + 2500) / 5000;
outval = (outval * x + 5000) / 10000;
outval -= (10 * x * x + 10433) / 20866;
outval += 4 * x - 11505;
outb_p((outval >> 8) & 0x01, dev->io + 4);
outb_p(outval >> 9, dev->io + 6);
outb_p(outval & 0xff, dev->io + 8);
mutex_unlock(&dev->lock);
return 0;
}
static int typhoon_setfreq(struct typhoon *dev, unsigned long frequency)
{
typhoon_setfreq_generic(dev, frequency);
dev->curfreq = frequency;
return 0;
}
static void typhoon_mute(struct typhoon *dev)
{
if (dev->muted == 1)
return;
typhoon_setvol_generic(dev, 0);
typhoon_setfreq_generic(dev, dev->mutefreq);
dev->muted = 1;
}
static void typhoon_unmute(struct typhoon *dev)
{
if (dev->muted == 0)
return;
typhoon_setfreq_generic(dev, dev->curfreq);
typhoon_setvol_generic(dev, dev->curvol);
dev->muted = 0;
}
static int typhoon_setvol(struct typhoon *dev, int vol)
{
if (dev->muted && vol != 0) { /* user is unmuting the card */
dev->curvol = vol;
typhoon_unmute(dev);
return 0;
}
if (vol == dev->curvol) /* requested volume == current */
return 0;
if (vol == 0) { /* volume == 0 means mute the card */
typhoon_mute(dev);
dev->curvol = vol;
return 0;
}
typhoon_setvol_generic(dev, vol);
dev->curvol = vol;
return 0;
}
static int vidioc_querycap(struct file *file, void *priv,
struct v4l2_capability *v)
{
strlcpy(v->driver, "radio-typhoon", sizeof(v->driver));
strlcpy(v->card, "Typhoon Radio", sizeof(v->card));
strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
return 0;
}
static int vidioc_g_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
if (v->index > 0)
return -EINVAL;
strlcpy(v->name, "FM", sizeof(v->name));
v->type = V4L2_TUNER_RADIO;
v->rangelow = 87.5 * 16000;
v->rangehigh = 108 * 16000;
v->rxsubchans = V4L2_TUNER_SUB_MONO;
v->capability = V4L2_TUNER_CAP_LOW;
v->audmode = V4L2_TUNER_MODE_MONO;
v->signal = 0xFFFF; /* We can't get the signal strength */
return 0;
}
static int vidioc_s_tuner(struct file *file, void *priv,
struct v4l2_tuner *v)
{
return v->index ? -EINVAL : 0;
}
static int vidioc_g_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct typhoon *dev = video_drvdata(file);
if (f->tuner != 0)
return -EINVAL;
f->type = V4L2_TUNER_RADIO;
f->frequency = dev->curfreq;
return 0;
}
static int vidioc_s_frequency(struct file *file, void *priv,
struct v4l2_frequency *f)
{
struct typhoon *dev = video_drvdata(file);
if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
return -EINVAL;
dev->curfreq = f->frequency;
typhoon_setfreq(dev, dev->curfreq);
return 0;
}
static int vidioc_queryctrl(struct file *file, void *priv,
struct v4l2_queryctrl *qc)
{
switch (qc->id) {
case V4L2_CID_AUDIO_MUTE:
return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
case V4L2_CID_AUDIO_VOLUME:
return v4l2_ctrl_query_fill(qc, 0, 65535, 16384, 65535);
}
return -EINVAL;
}
static int vidioc_g_ctrl(struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct typhoon *dev = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
ctrl->value = dev->muted;
return 0;
case V4L2_CID_AUDIO_VOLUME:
ctrl->value = dev->curvol;
return 0;
}
return -EINVAL;
}
static int vidioc_s_ctrl (struct file *file, void *priv,
struct v4l2_control *ctrl)
{
struct typhoon *dev = video_drvdata(file);
switch (ctrl->id) {
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value)
typhoon_mute(dev);
else
typhoon_unmute(dev);
return 0;
case V4L2_CID_AUDIO_VOLUME:
typhoon_setvol(dev, ctrl->value);
return 0;
}
return -EINVAL;
}
static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
{
*i = 0;
return 0;
}
static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
{
return i ? -EINVAL : 0;
}
static int vidioc_g_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
a->index = 0;
strlcpy(a->name, "Radio", sizeof(a->name));
a->capability = V4L2_AUDCAP_STEREO;
return 0;
}
static int vidioc_s_audio(struct file *file, void *priv,
struct v4l2_audio *a)
{
return a->index ? -EINVAL : 0;
}
static int vidioc_log_status(struct file *file, void *priv)
{
struct typhoon *dev = video_drvdata(file);
struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
v4l2_info(v4l2_dev, BANNER);
#ifdef MODULE
v4l2_info(v4l2_dev, "Load type: Driver loaded as a module\n\n");
#else
v4l2_info(v4l2_dev, "Load type: Driver compiled into kernel\n\n");
#endif
v4l2_info(v4l2_dev, "frequency = %lu kHz\n", dev->curfreq >> 4);
v4l2_info(v4l2_dev, "volume = %d\n", dev->curvol);
v4l2_info(v4l2_dev, "mute = %s\n", dev->muted ? "on" : "off");
v4l2_info(v4l2_dev, "io = 0x%x\n", dev->io);
v4l2_info(v4l2_dev, "mute frequency = %lu kHz\n", dev->mutefreq >> 4);
return 0;
}
static const struct v4l2_file_operations typhoon_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
.vidioc_log_status = vidioc_log_status,
.vidioc_querycap = vidioc_querycap,
.vidioc_g_tuner = vidioc_g_tuner,
.vidioc_s_tuner = vidioc_s_tuner,
.vidioc_g_audio = vidioc_g_audio,
.vidioc_s_audio = vidioc_s_audio,
.vidioc_g_input = vidioc_g_input,
.vidioc_s_input = vidioc_s_input,
.vidioc_g_frequency = vidioc_g_frequency,
.vidioc_s_frequency = vidioc_s_frequency,
.vidioc_queryctrl = vidioc_queryctrl,
.vidioc_g_ctrl = vidioc_g_ctrl,
.vidioc_s_ctrl = vidioc_s_ctrl,
};
static int __init typhoon_init(void)
{
struct typhoon *dev = &typhoon_card;
struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
int res;
strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name));
dev->io = io;
if (dev->io == -1) {
v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n");
return -EINVAL;
}
if (mutefreq < 87000 || mutefreq > 108500) {
v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n");
v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
return -EINVAL;
}
dev->curfreq = dev->mutefreq = mutefreq << 4;
mutex_init(&dev->lock);
if (!request_region(dev->io, 8, "typhoon")) {
v4l2_err(v4l2_dev, "port 0x%x already in use\n",
dev->io);
return -EBUSY;
}
res = v4l2_device_register(NULL, v4l2_dev);
if (res < 0) {
release_region(dev->io, 8);
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
return res;
}
v4l2_info(v4l2_dev, BANNER);
strlcpy(dev->vdev.name, v4l2_dev->name, sizeof(dev->vdev.name));
dev->vdev.v4l2_dev = v4l2_dev;
dev->vdev.fops = &typhoon_fops;
dev->vdev.ioctl_ops = &typhoon_ioctl_ops;
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
/* mute card - prevents noisy bootups */
typhoon_mute(dev);
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&dev->v4l2_dev);
release_region(dev->io, 8);
return -EINVAL;
}
v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io);
v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq);
return 0;
}
static void __exit typhoon_exit(void)
{
struct typhoon *dev = &typhoon_card;
video_unregister_device(&dev->vdev);
v4l2_device_unregister(&dev->v4l2_dev);
release_region(dev->io, 8);
}
module_init(typhoon_init);
module_exit(typhoon_exit);