- 根目录:
- drivers
- usb
- host
- ohci-sa1111.c
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
* (C) Copyright 2002 Hewlett-Packard Company
*
* SA1111 Bus Glue
*
* Written by Christopher Hoover <ch@hpl.hp.com>
* Based on fragments of previous driver by Russell King et al.
*
* This file is licenced under the GPL.
*/
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/assabet.h>
#include <mach/badge4.h>
#include <asm/hardware/sa1111.h>
#ifndef CONFIG_SA1111
#error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined."
#endif
extern int usb_disabled(void);
/*-------------------------------------------------------------------------*/
static void sa1111_start_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst = 0;
printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n",
__FILE__);
#ifdef CONFIG_SA1100_BADGE4
if (machine_is_badge4()) {
badge4_set_5V(BADGE4_5V_USB, 1);
}
#endif
if (machine_is_xp860() ||
machine_has_neponset() ||
machine_is_pfs168() ||
machine_is_badge4())
usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW;
/*
* Configure the power sense and control lines. Place the USB
* host controller in reset.
*/
sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
dev->mapbase + SA1111_USB_RESET);
/*
* Now, carefully enable the USB clock, and take
* the USB host controller out of reset.
*/
sa1111_enable_device(dev);
udelay(11);
sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET);
}
static void sa1111_stop_hc(struct sa1111_dev *dev)
{
unsigned int usb_rst;
printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n",
__FILE__);
/*
* Put the USB host controller into reset.
*/
usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET);
sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
dev->mapbase + SA1111_USB_RESET);
/*
* Stop the USB clock.
*/
sa1111_disable_device(dev);
#ifdef CONFIG_SA1100_BADGE4
if (machine_is_badge4()) {
/* Disable power to the USB bus */
badge4_set_5V(BADGE4_5V_USB, 0);
}
#endif
}
/*-------------------------------------------------------------------------*/
#if 0
static void dump_hci_status(struct usb_hcd *hcd, const char *label)
{
unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS);
dbg ("%s USB_STATUS = { %s%s%s%s%s}", label,
((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""),
((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "),
((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "),
((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : ""));
}
#endif
/*-------------------------------------------------------------------------*/
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
/**
* usb_hcd_sa1111_probe - initialize SA-1111-based HCDs
* Context: !in_interrupt()
*
* Allocates basic resources for this USB host controller, and
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*
* Store this function in the HCD's struct pci_driver as probe().
*/
int usb_hcd_sa1111_probe (const struct hc_driver *driver,
struct sa1111_dev *dev)
{
struct usb_hcd *hcd;
int retval;
hcd = usb_create_hcd (driver, &dev->dev, "sa1111");
if (!hcd)
return -ENOMEM;
hcd->rsrc_start = dev->res.start;
hcd->rsrc_len = resource_size(&dev->res);
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
dbg("request_mem_region failed");
retval = -EBUSY;
goto err1;
}
hcd->regs = dev->mapbase;
sa1111_start_hc(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
retval = usb_add_hcd(hcd, dev->irq[1], 0);
if (retval == 0)
return retval;
sa1111_stop_hc(dev);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
return retval;
}
/* may be called without controller electrically present */
/* may be called with controller, bus, and devices active */
/**
* usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs
* @dev: USB Host Controller being removed
* Context: !in_interrupt()
*
* Reverses the effect of usb_hcd_sa1111_probe(), first invoking
* the HCD's stop() method. It is always called from a thread
* context, normally "rmmod", "apmd", or something similar.
*
*/
void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev)
{
usb_remove_hcd(hcd);
sa1111_stop_hc(dev);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
}
/*-------------------------------------------------------------------------*/
static int __devinit
ohci_sa1111_start (struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ret;
if ((ret = ohci_init(ohci)) < 0)
return ret;
if ((ret = ohci_run (ohci)) < 0) {
err ("can't start %s", hcd->self.bus_name);
ohci_stop (hcd);
return ret;
}
return 0;
}
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_sa1111_hc_driver = {
.description = hcd_name,
.product_desc = "SA-1111 OHCI",
.hcd_priv_size = sizeof(struct ohci_hcd),
/*
* generic hardware linkage
*/
.irq = ohci_irq,
.flags = HCD_USB11 | HCD_MEMORY,
/*
* basic lifecycle operations
*/
.start = ohci_sa1111_start,
.stop = ohci_stop,
/*
* managing i/o requests and associated device resources
*/
.urb_enqueue = ohci_urb_enqueue,
.urb_dequeue = ohci_urb_dequeue,
.endpoint_disable = ohci_endpoint_disable,
/*
* scheduling support
*/
.get_frame_number = ohci_get_frame,
/*
* root hub support
*/
.hub_status_data = ohci_hub_status_data,
.hub_control = ohci_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
#endif
.start_port_reset = ohci_start_port_reset,
};
/*-------------------------------------------------------------------------*/
static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev)
{
int ret;
if (usb_disabled())
return -ENODEV;
ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev);
return ret;
}
static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev)
{
struct usb_hcd *hcd = sa1111_get_drvdata(dev);
usb_hcd_sa1111_remove(hcd, dev);
return 0;
}
static struct sa1111_driver ohci_hcd_sa1111_driver = {
.drv = {
.name = "sa1111-ohci",
},
.devid = SA1111_DEVID_USB,
.probe = ohci_hcd_sa1111_drv_probe,
.remove = ohci_hcd_sa1111_drv_remove,
};