/* * Q40 I/O port IDE Driver * * (c) Richard Zidlicky * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. * * */ #include <linux/types.h> #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/blkdev.h> #include <linux/ide.h> #include <linux/module.h> #include <asm/ide.h> /* * Bases of the IDE interfaces */ #define Q40IDE_NUM_HWIFS 2 #define PCIDE_BASE1 0x1f0 #define PCIDE_BASE2 0x170 #define PCIDE_BASE3 0x1e8 #define PCIDE_BASE4 0x168 #define PCIDE_BASE5 0x1e0 #define PCIDE_BASE6 0x160 static const unsigned long pcide_bases[Q40IDE_NUM_HWIFS] = { PCIDE_BASE1, PCIDE_BASE2, /* PCIDE_BASE3, PCIDE_BASE4 , PCIDE_BASE5, PCIDE_BASE6 */ }; static int q40ide_default_irq(unsigned long base) { switch (base) { case 0x1f0: return 14; case 0x170: return 15; case 0x1e8: return 11; default: return 0; } } /* * Addresses are pretranslated for Q40 ISA access. */ static void q40_ide_setup_ports(struct ide_hw *hw, unsigned long base, int irq) { memset(hw, 0, sizeof(*hw)); /* BIG FAT WARNING: assumption: only DATA port is ever used in 16 bit mode */ hw->io_ports.data_addr = Q40_ISA_IO_W(base); hw->io_ports.error_addr = Q40_ISA_IO_B(base + 1); hw->io_ports.nsect_addr = Q40_ISA_IO_B(base + 2); hw->io_ports.lbal_addr = Q40_ISA_IO_B(base + 3); hw->io_ports.lbam_addr = Q40_ISA_IO_B(base + 4); hw->io_ports.lbah_addr = Q40_ISA_IO_B(base + 5); hw->io_ports.device_addr = Q40_ISA_IO_B(base + 6); hw->io_ports.status_addr = Q40_ISA_IO_B(base + 7); hw->io_ports.ctl_addr = Q40_ISA_IO_B(base + 0x206); hw->irq = irq; } static void q40ide_input_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long data_addr = drive->hwif->io_ports.data_addr; if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { __ide_mm_insw(data_addr, buf, (len + 1) / 2); return; } raw_insw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } static void q40ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, void *buf, unsigned int len) { unsigned long data_addr = drive->hwif->io_ports.data_addr; if (drive->media == ide_disk && cmd && (cmd->tf_flags & IDE_TFLAG_FS)) { __ide_mm_outsw(data_addr, buf, (len + 1) / 2); return; } raw_outsw_swapw((u16 *)data_addr, buf, (len + 1) / 2); } /* Q40 has a byte-swapped IDE interface */ static const struct ide_tp_ops q40ide_tp_ops = { .exec_command = ide_exec_command, .read_status = ide_read_status, .read_altstatus = ide_read_altstatus, .write_devctl = ide_write_devctl, .dev_select = ide_dev_select, .tf_load = ide_tf_load, .tf_read = ide_tf_read, .input_data = q40ide_input_data, .output_data = q40ide_output_data, }; static const struct ide_port_info q40ide_port_info = { .tp_ops = &q40ide_tp_ops, .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA, .irq_flags = IRQF_SHARED, .chipset = ide_generic, }; /* * the static array is needed to have the name reported in /proc/ioports, * hwif->name unfortunately isn't available yet */ static const char *q40_ide_names[Q40IDE_NUM_HWIFS]={ "ide0", "ide1" }; /* * Probe for Q40 IDE interfaces */ static int __init q40ide_init(void) { int i; struct ide_hw hw[Q40IDE_NUM_HWIFS], *hws[] = { NULL, NULL }; if (!MACH_IS_Q40) return -ENODEV; printk(KERN_INFO "ide: Q40 IDE controller\n"); for (i = 0; i < Q40IDE_NUM_HWIFS; i++) { const char *name = q40_ide_names[i]; if (!request_region(pcide_bases[i], 8, name)) { printk("could not reserve ports %lx-%lx for %s\n", pcide_bases[i],pcide_bases[i]+8,name); continue; } if (!request_region(pcide_bases[i]+0x206, 1, name)) { printk("could not reserve port %lx for %s\n", pcide_bases[i]+0x206,name); release_region(pcide_bases[i], 8); continue; } q40_ide_setup_ports(&hw[i], pcide_bases[i], q40ide_default_irq(pcide_bases[i])); hws[i] = &hw[i]; } return ide_host_add(&q40ide_port_info, hws, Q40IDE_NUM_HWIFS, NULL); } module_init(q40ide_init); MODULE_LICENSE("GPL");