# # USB Miscellaneous driver configuration # comment "USB Miscellaneous drivers" depends on USB config USB_EMI62 tristate "EMI 6|2m USB Audio interface support" depends on USB ---help--- This driver loads firmware to Emagic EMI 6|2m low latency USB Audio and Midi interface. After firmware load the device is handled with standard linux USB Audio driver. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called audio. If you want to compile it as a module, say M here and read <file:Documentation/kbuild/modules.txt>. config USB_EMI26 tristate "EMI 2|6 USB Audio interface support" depends on USB ---help--- This driver loads firmware to Emagic EMI 2|6 low latency USB Audio interface. After firmware load the device is handled with standard linux USB Audio driver. To compile this driver as a module, choose M here: the module will be called emi26. config USB_ADUTUX tristate "ADU devices from Ontrak Control Systems" depends on USB help Say Y if you want to use an ADU device from Ontrak Control Systems. To compile this driver as a module, choose M here. The module will be called adutux. config USB_SEVSEG tristate "USB 7-Segment LED Display" depends on USB help Say Y here if you have a USB 7-Segment Display by Delcom To compile this driver as a module, choose M here: the module will be called usbsevseg. config USB_RIO500 tristate "USB Diamond Rio500 support" depends on USB help Say Y here if you want to connect a USB Rio500 mp3 player to your computer's USB port. Please read <file:Documentation/usb/rio.txt> for more information. To compile this driver as a module, choose M here: the module will be called rio500. config USB_LEGOTOWER tristate "USB Lego Infrared Tower support" depends on USB help Say Y here if you want to connect a USB Lego Infrared Tower to your computer's USB port. This code is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). The module will be called legousbtower. If you want to compile it as a module, say M here and read <file:Documentation/kbuild/modules.txt>. config USB_LCD tristate "USB LCD driver support" depends on USB help Say Y here if you want to connect an USBLCD to your computer's USB port. The USBLCD is a small USB interface board for alphanumeric LCD modules. See <http://www.usblcd.de/> for more information. To compile this driver as a module, choose M here: the module will be called usblcd. config USB_LED tristate "USB LED driver support" depends on USB help Say Y here if you want to connect an USBLED device to your computer's USB port. To compile this driver as a module, choose M here: the module will be called usbled. config USB_CYPRESS_CY7C63 tristate "Cypress CY7C63xxx USB driver support" depends on USB help Say Y here if you want to connect a Cypress CY7C63xxx micro controller to your computer's USB port. Currently this driver supports the pre-programmed devices (incl. firmware) by AK Modul-Bus Computer GmbH. Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html To compile this driver as a module, choose M here: the module will be called cypress_cy7c63. config USB_CYTHERM tristate "Cypress USB thermometer driver support" depends on USB help Say Y here if you want to connect a Cypress USB thermometer device to your computer's USB port. This device is also known as the Cypress USB Starter kit or demo board. The Elektor magazine published a modified version of this device in issue #291. To compile this driver as a module, choose M here: the module will be called cytherm. config USB_IDMOUSE tristate "Siemens ID USB Mouse Fingerprint sensor support" depends on USB help Say Y here if you want to use the fingerprint sensor on the Siemens ID Mouse. There is also a Siemens ID Mouse _Professional_, which has not been tested with this driver, but uses the same sensor and may therefore work. This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX", which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm". See also <http://www.fs.tum.de/~echtler/idmouse/>. config USB_FTDI_ELAN tristate "Elan PCMCIA CardBus Adapter USB Client" depends on USB default M help ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. Currently only the U132 adapter is available. The U132 is specifically designed for CardBus PC cards that contain an OHCI host controller. Typical PC cards are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work with PC cards that do not contain an OHCI controller. To use a U132 adapter you will need this "ftdi-elan" module as well as the "u132-hcd" module which is a USB host controller driver that talks to the OHCI controller within CardBus card that are inserted in the U132 adapter. This driver has been tested with a CardBus OHCI USB adapter, and worked with a USB PEN Drive inserted into the first USB port of the PCCARD. A rather pointless thing to do, but useful for testing. See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller" It is safe to say M here. config USB_APPLEDISPLAY tristate "Apple Cinema Display support" depends on USB select BACKLIGHT_LCD_SUPPORT select BACKLIGHT_CLASS_DEVICE help Say Y here if you want to control the backlight of Apple Cinema Displays over USB. This driver provides a sysfs interface. source "drivers/usb/misc/sisusbvga/Kconfig" config USB_LD tristate "USB LD driver" depends on USB help This driver is for generic USB devices that use interrupt transfers, like LD Didactic's USB devices. To compile this driver as a module, choose M here: the module will be called ldusb. config USB_TRANCEVIBRATOR tristate "PlayStation 2 Trance Vibrator driver support" depends on USB help Say Y here if you want to connect a PlayStation 2 Trance Vibrator device to your computer's USB port. To compile this driver as a module, choose M here: the module will be called trancevibrator. config USB_IOWARRIOR tristate "IO Warrior driver support" depends on USB help Say Y here if you want to support the IO Warrior devices from Code Mercenaries. This includes support for the following devices: IO Warrior 40 IO Warrior 24 IO Warrior 56 IO Warrior 24 Power Vampire To compile this driver as a module, choose M here: the module will be called iowarrior. config USB_TEST tristate "USB testing driver" depends on USB help This driver is for testing host controller software. It is used with specialized device firmware for regression and stress testing, to help prevent problems from cropping up with "real" drivers. See <http://www.linux-usb.org/usbtest/> for more information, including sample test device firmware and "how to use it". config USB_ISIGHTFW tristate "iSight firmware loading support" depends on USB select FW_LOADER help This driver loads firmware for USB Apple iSight cameras, allowing them to be driven by the USB video class driver available at http://linux-uvc.berlios.de The firmware for this driver must be extracted from the MacOS driver beforehand. Tools for doing so are available at http://bersace03.free.fr config USB_YUREX tristate "USB YUREX driver support" depends on USB help Say Y here if you want to connect a YUREX to your computer's USB port. The YUREX is a leg-shakes sensor. See <http://bbu.kayac.com/en/> for further information. This driver supports read/write of leg-shakes counter and fasync for the counter update via a device file /dev/yurex*. To compile this driver as a module, choose M here: the module will be called yurex.