1. 根目录:
2. drivers
3. power
4. ds2782_battery.c

/*
 * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
 *
 * Copyright (C) 2009 Bluewater Systems Ltd
 *
 * Author: Ryan Mallon
 *
 * DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/swab.h>
#include <linux/i2c.h>
#include <linux/idr.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
#include <linux/ds2782_battery.h>

#define DS2782_REG_RARC		0x06	/* Remaining active relative capacity */

#define DS278x_REG_VOLT_MSB	0x0c
#define DS278x_REG_TEMP_MSB	0x0a
#define DS278x_REG_CURRENT_MSB	0x0e

/* EEPROM Block */
#define DS2782_REG_RSNSP	0x69	/* Sense resistor value */

/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
#define DS2782_CURRENT_UNITS	1563

#define DS2786_REG_RARC		0x02	/* Remaining active relative capacity */

#define DS2786_CURRENT_UNITS	25

struct ds278x_info;

struct ds278x_battery_ops {
	int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
	int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uV);
	int (*get_battery_capacity)(struct ds278x_info *info, int *capacity);
};

#define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)

struct ds278x_info {
	struct i2c_client	*client;
	struct power_supply	battery;
	struct ds278x_battery_ops  *ops;
	int			id;
	int                     rsns;
};

static DEFINE_IDR(battery_id);
static DEFINE_MUTEX(battery_lock);

static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val)
{
	int ret;

	ret = i2c_smbus_read_byte_data(info->client, reg);
	if (ret < 0) {
		dev_err(&info->client->dev, "register read failed\n");
		return ret;
	}

	*val = ret;
	return 0;
}

static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb,
				    s16 *val)
{
	int ret;

	ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
	if (ret < 0) {
		dev_err(&info->client->dev, "register read failed\n");
		return ret;
	}

	*val = ret;
	return 0;
}

static int ds278x_get_temp(struct ds278x_info *info, int *temp)
{
	s16 raw;
	int err;

	/*
	 * Temperature is measured in units of 0.125 degrees celcius, the
	 * power_supply class measures temperature in tenths of degrees
	 * celsius. The temperature value is stored as a 10 bit number, plus
	 * sign in the upper bits of a 16 bit register.
	 */
	err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw);
	if (err)
		return err;
	*temp = ((raw / 32) * 125) / 100;
	return 0;
}

static int ds2782_get_current(struct ds278x_info *info, int *current_uA)
{
	int sense_res;
	int err;
	u8 sense_res_raw;
	s16 raw;

	/*
	 * The units of measurement for current are dependent on the value of
	 * the sense resistor.
	 */
	err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
	if (err)
		return err;
	if (sense_res_raw == 0) {
		dev_err(&info->client->dev, "sense resistor value is 0\n");
		return -ENXIO;
	}
	sense_res = 1000 / sense_res_raw;

	dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
		sense_res);
	err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
	if (err)
		return err;
	*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
	return 0;
}

static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uV)
{
	s16 raw;
	int err;

	/*
	 * Voltage is measured in units of 4.88mV. The voltage is stored as
	 * a 10-bit number plus sign, in the upper bits of a 16-bit register
	 */
	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
	if (err)
		return err;
	*voltage_uV = (raw / 32) * 4800;
	return 0;
}

static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
{
	int err;
	u8 raw;

	err = ds278x_read_reg(info, DS2782_REG_RARC, &raw);
	if (err)
		return err;
	*capacity = raw;
	return 0;
}

static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
{
	int err;
	s16 raw;

	err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
	if (err)
		return err;
	*current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns);
	return 0;
}

static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV)
{
	s16 raw;
	int err;

	/*
	 * Voltage is measured in units of 1.22mV. The voltage is stored as
	 * a 10-bit number plus sign, in the upper bits of a 16-bit register
	 */
	err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
	if (err)
		return err;
	*voltage_uV = (raw / 8) * 1220;
	return 0;
}

static int ds2786_get_capacity(struct ds278x_info *info, int *capacity)
{
	int err;
	u8 raw;

	err = ds278x_read_reg(info, DS2786_REG_RARC, &raw);
	if (err)
		return err;
	/* Relative capacity is displayed with resolution 0.5 % */
	*capacity = raw/2 ;
	return 0;
}

static int ds278x_get_status(struct ds278x_info *info, int *status)
{
	int err;
	int current_uA;
	int capacity;

	err = info->ops->get_battery_current(info, &current_uA);
	if (err)
		return err;

	err = info->ops->get_battery_capacity(info, &capacity);
	if (err)
		return err;

	if (capacity == 100)
		*status = POWER_SUPPLY_STATUS_FULL;
	else if (current_uA == 0)
		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
	else if (current_uA < 0)
		*status = POWER_SUPPLY_STATUS_DISCHARGING;
	else
		*status = POWER_SUPPLY_STATUS_CHARGING;

	return 0;
}

static int ds278x_battery_get_property(struct power_supply *psy,
				       enum power_supply_property prop,
				       union power_supply_propval *val)
{
	struct ds278x_info *info = to_ds278x_info(psy);
	int ret;

	switch (prop) {
	case POWER_SUPPLY_PROP_STATUS:
		ret = ds278x_get_status(info, &val->intval);
		break;

	case POWER_SUPPLY_PROP_CAPACITY:
		ret = info->ops->get_battery_capacity(info, &val->intval);
		break;

	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
		ret = info->ops->get_battery_voltage(info, &val->intval);
		break;

	case POWER_SUPPLY_PROP_CURRENT_NOW:
		ret = info->ops->get_battery_current(info, &val->intval);
		break;

	case POWER_SUPPLY_PROP_TEMP:
		ret = ds278x_get_temp(info, &val->intval);
		break;

	default:
		ret = -EINVAL;
	}

	return ret;
}

static enum power_supply_property ds278x_battery_props[] = {
	POWER_SUPPLY_PROP_STATUS,
	POWER_SUPPLY_PROP_CAPACITY,
	POWER_SUPPLY_PROP_VOLTAGE_NOW,
	POWER_SUPPLY_PROP_CURRENT_NOW,
	POWER_SUPPLY_PROP_TEMP,
};

static void ds278x_power_supply_init(struct power_supply *battery)
{
	battery->type			= POWER_SUPPLY_TYPE_BATTERY;
	battery->properties		= ds278x_battery_props;
	battery->num_properties		= ARRAY_SIZE(ds278x_battery_props);
	battery->get_property		= ds278x_battery_get_property;
	battery->external_power_changed	= NULL;
}

static int ds278x_battery_remove(struct i2c_client *client)
{
	struct ds278x_info *info = i2c_get_clientdata(client);

	power_supply_unregister(&info->battery);
	kfree(info->battery.name);

	mutex_lock(&battery_lock);
	idr_remove(&battery_id, info->id);
	mutex_unlock(&battery_lock);

	kfree(info);
	return 0;
}

enum ds278x_num_id {
	DS2782 = 0,
	DS2786,
};

static struct ds278x_battery_ops ds278x_ops[] = {
	[DS2782] = {
		.get_battery_current  = ds2782_get_current,
		.get_battery_voltage  = ds2782_get_voltage,
		.get_battery_capacity = ds2782_get_capacity,
	},
	[DS2786] = {
		.get_battery_current  = ds2786_get_current,
		.get_battery_voltage  = ds2786_get_voltage,
		.get_battery_capacity = ds2786_get_capacity,
	}
};

static int ds278x_battery_probe(struct i2c_client *client,
				const struct i2c_device_id *id)
{
	struct ds278x_platform_data *pdata = client->dev.platform_data;
	struct ds278x_info *info;
	int ret;
	int num;

	/*
	 * ds2786 should have the sense resistor value set
	 * in the platform data
	 */
	if (id->driver_data == DS2786 && !pdata) {
		dev_err(&client->dev, "missing platform data for ds2786\n");
		return -EINVAL;
	}

	/* Get an ID for this battery */
	ret = idr_pre_get(&battery_id, GFP_KERNEL);
	if (ret == 0) {
		ret = -ENOMEM;
		goto fail_id;
	}

	mutex_lock(&battery_lock);
	ret = idr_get_new(&battery_id, client, &num);
	mutex_unlock(&battery_lock);
	if (ret < 0)
		goto fail_id;

	info = kzalloc(sizeof(*info), GFP_KERNEL);
	if (!info) {
		ret = -ENOMEM;
		goto fail_info;
	}

	info->battery.name = kasprintf(GFP_KERNEL, "%s-%d", client->name, num);
	if (!info->battery.name) {
		ret = -ENOMEM;
		goto fail_name;
	}

	if (id->driver_data == DS2786)
		info->rsns = pdata->rsns;

	i2c_set_clientdata(client, info);
	info->client = client;
	info->id = num;
	info->ops  = &ds278x_ops[id->driver_data];
	ds278x_power_supply_init(&info->battery);

	ret = power_supply_register(&client->dev, &info->battery);
	if (ret) {
		dev_err(&client->dev, "failed to register battery\n");
		goto fail_register;
	}

	return 0;

fail_register:
	kfree(info->battery.name);
fail_name:
	kfree(info);
fail_info:
	mutex_lock(&battery_lock);
	idr_remove(&battery_id, num);
	mutex_unlock(&battery_lock);
fail_id:
	return ret;
}

static const struct i2c_device_id ds278x_id[] = {
	{"ds2782", DS2782},
	{"ds2786", DS2786},
	{},
};
MODULE_DEVICE_TABLE(i2c, ds278x_id);

static struct i2c_driver ds278x_battery_driver = {
	.driver 	= {
		.name	= "ds2782-battery",
	},
	.probe		= ds278x_battery_probe,
	.remove		= ds278x_battery_remove,
	.id_table	= ds278x_id,
};
module_i2c_driver(ds278x_battery_driver);

MODULE_AUTHOR("Ryan Mallon");
MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
MODULE_LICENSE("GPL");