- 根目录:
- drivers
- scsi
- aic7xxx
- aicasm
- aicasm.c
/*
* Aic7xxx SCSI host adapter firmware assembler
*
* Copyright (c) 1997, 1998, 2000, 2001 Justin T. Gibbs.
* Copyright (c) 2001, 2002 Adaptec Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* $Id: //depot/aic7xxx/aic7xxx/aicasm/aicasm.c#23 $
*
* $FreeBSD$
*/
#include <sys/types.h>
#include <sys/mman.h>
#include <ctype.h>
#include <inttypes.h>
#include <regex.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sysexits.h>
#include <unistd.h>
#if linux
#include <endian.h>
#else
#include <machine/endian.h>
#endif
#include "aicasm.h"
#include "aicasm_symbol.h"
#include "aicasm_insformat.h"
typedef struct patch {
STAILQ_ENTRY(patch) links;
int patch_func;
u_int begin;
u_int skip_instr;
u_int skip_patch;
} patch_t;
STAILQ_HEAD(patch_list, patch) patches;
static void usage(void);
static void back_patch(void);
static void output_code(void);
static void output_listing(char *ifilename);
static void dump_scope(scope_t *scope);
static void emit_patch(scope_t *scope, int patch);
static int check_patch(patch_t **start_patch, int start_instr,
int *skip_addr, int *func_vals);
struct path_list search_path;
int includes_search_curdir;
char *appname;
char *stock_include_file;
FILE *ofile;
char *ofilename;
char *regfilename;
FILE *regfile;
char *listfilename;
FILE *listfile;
char *regdiagfilename;
FILE *regdiagfile;
int src_mode;
int dst_mode;
static STAILQ_HEAD(,instruction) seq_program;
struct cs_tailq cs_tailq;
struct scope_list scope_stack;
symlist_t patch_functions;
#if DEBUG
extern int yy_flex_debug;
extern int mm_flex_debug;
extern int yydebug;
extern int mmdebug;
#endif
extern FILE *yyin;
extern int yyparse(void);
int main(int argc, char *argv[]);
int
main(int argc, char *argv[])
{
extern char *optarg;
extern int optind;
int ch;
int retval;
char *inputfilename;
scope_t *sentinal;
STAILQ_INIT(&patches);
SLIST_INIT(&search_path);
STAILQ_INIT(&seq_program);
TAILQ_INIT(&cs_tailq);
SLIST_INIT(&scope_stack);
/* Set Sentinal scope node */
sentinal = scope_alloc();
sentinal->type = SCOPE_ROOT;
includes_search_curdir = 1;
appname = *argv;
regfile = NULL;
listfile = NULL;
#if DEBUG
yy_flex_debug = 0;
mm_flex_debug = 0;
yydebug = 0;
mmdebug = 0;
#endif
while ((ch = getopt(argc, argv, "d:i:l:n:o:p:r:I:")) != -1) {
switch(ch) {
case 'd':
#if DEBUG
if (strcmp(optarg, "s") == 0) {
yy_flex_debug = 1;
mm_flex_debug = 1;
} else if (strcmp(optarg, "p") == 0) {
yydebug = 1;
mmdebug = 1;
} else {
fprintf(stderr, "%s: -d Requires either an "
"'s' or 'p' argument\n", appname);
usage();
}
#else
stop("-d: Assembler not built with debugging "
"information", EX_SOFTWARE);
#endif
break;
case 'i':
stock_include_file = optarg;
break;
case 'l':
/* Create a program listing */
if ((listfile = fopen(optarg, "w")) == NULL) {
perror(optarg);
stop(NULL, EX_CANTCREAT);
}
listfilename = optarg;
break;
case 'n':
/* Don't complain about the -nostdinc directrive */
if (strcmp(optarg, "ostdinc")) {
fprintf(stderr, "%s: Unknown option -%c%s\n",
appname, ch, optarg);
usage();
/* NOTREACHED */
}
break;
case 'o':
if ((ofile = fopen(optarg, "w")) == NULL) {
perror(optarg);
stop(NULL, EX_CANTCREAT);
}
ofilename = optarg;
break;
case 'p':
/* Create Register Diagnostic "printing" Functions */
if ((regdiagfile = fopen(optarg, "w")) == NULL) {
perror(optarg);
stop(NULL, EX_CANTCREAT);
}
regdiagfilename = optarg;
break;
case 'r':
if ((regfile = fopen(optarg, "w")) == NULL) {
perror(optarg);
stop(NULL, EX_CANTCREAT);
}
regfilename = optarg;
break;
case 'I':
{
path_entry_t include_dir;
if (strcmp(optarg, "-") == 0) {
if (includes_search_curdir == 0) {
fprintf(stderr, "%s: Warning - '-I-' "
"specified multiple "
"times\n", appname);
}
includes_search_curdir = 0;
for (include_dir = SLIST_FIRST(&search_path);
include_dir != NULL;
include_dir = SLIST_NEXT(include_dir,
links))
/*
* All entries before a '-I-' only
* apply to includes specified with
* quotes instead of "<>".
*/
include_dir->quoted_includes_only = 1;
} else {
include_dir =
(path_entry_t)malloc(sizeof(*include_dir));
if (include_dir == NULL) {
perror(optarg);
stop(NULL, EX_OSERR);
}
include_dir->directory = strdup(optarg);
if (include_dir->directory == NULL) {
perror(optarg);
stop(NULL, EX_OSERR);
}
include_dir->quoted_includes_only = 0;
SLIST_INSERT_HEAD(&search_path, include_dir,
links);
}
break;
}
case '?':
default:
usage();
/* NOTREACHED */
}
}
argc -= optind;
argv += optind;
if (argc != 1) {
fprintf(stderr, "%s: No input file specifiled\n", appname);
usage();
/* NOTREACHED */
}
if (regdiagfile != NULL
&& (regfile == NULL || stock_include_file == NULL)) {
fprintf(stderr,
"%s: The -p option requires the -r and -i options.\n",
appname);
usage();
/* NOTREACHED */
}
symtable_open();
inputfilename = *argv;
include_file(*argv, SOURCE_FILE);
retval = yyparse();
if (retval == 0) {
if (SLIST_FIRST(&scope_stack) == NULL
|| SLIST_FIRST(&scope_stack)->type != SCOPE_ROOT) {
stop("Unterminated conditional expression", EX_DATAERR);
/* NOTREACHED */
}
/* Process outmost scope */
process_scope(SLIST_FIRST(&scope_stack));
/*
* Decend the tree of scopes and insert/emit
* patches as appropriate. We perform a depth first
* tranversal, recursively handling each scope.
*/
/* start at the root scope */
dump_scope(SLIST_FIRST(&scope_stack));
/* Patch up forward jump addresses */
back_patch();
if (ofile != NULL)
output_code();
if (regfile != NULL)
symtable_dump(regfile, regdiagfile);
if (listfile != NULL)
output_listing(inputfilename);
}
stop(NULL, 0);
/* NOTREACHED */
return (0);
}
static void
usage()
{
(void)fprintf(stderr,
"usage: %-16s [-nostdinc] [-I-] [-I directory] [-o output_file]\n"
" [-r register_output_file [-p register_diag_file -i includefile]]\n"
" [-l program_list_file]\n"
" input_file\n", appname);
exit(EX_USAGE);
}
static void
back_patch()
{
struct instruction *cur_instr;
for (cur_instr = STAILQ_FIRST(&seq_program);
cur_instr != NULL;
cur_instr = STAILQ_NEXT(cur_instr, links)) {
if (cur_instr->patch_label != NULL) {
struct ins_format3 *f3_instr;
u_int address;
if (cur_instr->patch_label->type != LABEL) {
char buf[255];
snprintf(buf, sizeof(buf),
"Undefined label %s",
cur_instr->patch_label->name);
stop(buf, EX_DATAERR);
/* NOTREACHED */
}
f3_instr = &cur_instr->format.format3;
address = f3_instr->address;
address += cur_instr->patch_label->info.linfo->address;
f3_instr->address = address;
}
}
}
static void
output_code()
{
struct instruction *cur_instr;
patch_t *cur_patch;
critical_section_t *cs;
symbol_node_t *cur_node;
int instrcount;
instrcount = 0;
fprintf(ofile,
"/*\n"
" * DO NOT EDIT - This file is automatically generated\n"
" * from the following source files:\n"
" *\n"
"%s */\n", versions);
fprintf(ofile, "static const uint8_t seqprog[] = {\n");
for (cur_instr = STAILQ_FIRST(&seq_program);
cur_instr != NULL;
cur_instr = STAILQ_NEXT(cur_instr, links)) {
fprintf(ofile, "%s\t0x%02x, 0x%02x, 0x%02x, 0x%02x",
cur_instr == STAILQ_FIRST(&seq_program) ? "" : ",\n",
#ifdef __LITTLE_ENDIAN
cur_instr->format.bytes[0],
cur_instr->format.bytes[1],
cur_instr->format.bytes[2],
cur_instr->format.bytes[3]);
#else
cur_instr->format.bytes[3],
cur_instr->format.bytes[2],
cur_instr->format.bytes[1],
cur_instr->format.bytes[0]);
#endif
instrcount++;
}
fprintf(ofile, "\n};\n\n");
if (patch_arg_list == NULL)
stop("Patch argument list not defined",
EX_DATAERR);
/*
* Output patch information. Patch functions first.
*/
fprintf(ofile,
"typedef int %spatch_func_t (%s);\n", prefix, patch_arg_list);
for (cur_node = SLIST_FIRST(&patch_functions);
cur_node != NULL;
cur_node = SLIST_NEXT(cur_node,links)) {
fprintf(ofile,
"static %spatch_func_t %spatch%d_func;\n"
"\n"
"static int\n"
"%spatch%d_func(%s)\n"
"{\n"
" return (%s);\n"
"}\n\n",
prefix,
prefix,
cur_node->symbol->info.condinfo->func_num,
prefix,
cur_node->symbol->info.condinfo->func_num,
patch_arg_list,
cur_node->symbol->name);
}
fprintf(ofile,
"static const struct patch {\n"
" %spatch_func_t *patch_func;\n"
" uint32_t begin :10,\n"
" skip_instr :10,\n"
" skip_patch :12;\n"
"} patches[] = {\n", prefix);
for (cur_patch = STAILQ_FIRST(&patches);
cur_patch != NULL;
cur_patch = STAILQ_NEXT(cur_patch,links)) {
fprintf(ofile, "%s\t{ %spatch%d_func, %d, %d, %d }",
cur_patch == STAILQ_FIRST(&patches) ? "" : ",\n",
prefix,
cur_patch->patch_func, cur_patch->begin,
cur_patch->skip_instr, cur_patch->skip_patch);
}
fprintf(ofile, "\n};\n\n");
fprintf(ofile,
"static const struct cs {\n"
" uint16_t begin;\n"
" uint16_t end;\n"
"} critical_sections[] = {\n");
for (cs = TAILQ_FIRST(&cs_tailq);
cs != NULL;
cs = TAILQ_NEXT(cs, links)) {
fprintf(ofile, "%s\t{ %d, %d }",
cs == TAILQ_FIRST(&cs_tailq) ? "" : ",\n",
cs->begin_addr, cs->end_addr);
}
fprintf(ofile, "\n};\n\n");
fprintf(ofile,
"static const int num_critical_sections = sizeof(critical_sections)\n"
" / sizeof(*critical_sections);\n");
fprintf(stderr, "%s: %d instructions used\n", appname, instrcount);
}
static void
dump_scope(scope_t *scope)
{
scope_t *cur_scope;
/*
* Emit the first patch for this scope
*/
emit_patch(scope, 0);
/*
* Dump each scope within this one.
*/
cur_scope = TAILQ_FIRST(&scope->inner_scope);
while (cur_scope != NULL) {
dump_scope(cur_scope);
cur_scope = TAILQ_NEXT(cur_scope, scope_links);
}
/*
* Emit the second, closing, patch for this scope
*/
emit_patch(scope, 1);
}
void
emit_patch(scope_t *scope, int patch)
{
patch_info_t *pinfo;
patch_t *new_patch;
pinfo = &scope->patches[patch];
if (pinfo->skip_instr == 0)
/* No-Op patch */
return;
new_patch = (patch_t *)malloc(sizeof(*new_patch));
if (new_patch == NULL)
stop("Could not malloc patch structure", EX_OSERR);
memset(new_patch, 0, sizeof(*new_patch));
if (patch == 0) {
new_patch->patch_func = scope->func_num;
new_patch->begin = scope->begin_addr;
} else {
new_patch->patch_func = 0;
new_patch->begin = scope->end_addr;
}
new_patch->skip_instr = pinfo->skip_instr;
new_patch->skip_patch = pinfo->skip_patch;
STAILQ_INSERT_TAIL(&patches, new_patch, links);
}
void
output_listing(char *ifilename)
{
char buf[1024];
FILE *ifile;
struct instruction *cur_instr;
patch_t *cur_patch;
symbol_node_t *cur_func;
int *func_values;
int instrcount;
int instrptr;
int line;
int func_count;
int skip_addr;
instrcount = 0;
instrptr = 0;
line = 1;
skip_addr = 0;
if ((ifile = fopen(ifilename, "r")) == NULL) {
perror(ifilename);
stop(NULL, EX_DATAERR);
}
/*
* Determine which options to apply to this listing.
*/
for (func_count = 0, cur_func = SLIST_FIRST(&patch_functions);
cur_func != NULL;
cur_func = SLIST_NEXT(cur_func, links))
func_count++;
func_values = NULL;
if (func_count != 0) {
func_values = (int *)malloc(func_count * sizeof(int));
if (func_values == NULL)
stop("Could not malloc", EX_OSERR);
func_values[0] = 0; /* FALSE func */
func_count--;
/*
* Ask the user to fill in the return values for
* the rest of the functions.
*/
for (cur_func = SLIST_FIRST(&patch_functions);
cur_func != NULL && SLIST_NEXT(cur_func, links) != NULL;
cur_func = SLIST_NEXT(cur_func, links), func_count--) {
int input;
fprintf(stdout, "\n(%s)\n", cur_func->symbol->name);
fprintf(stdout,
"Enter the return value for "
"this expression[T/F]:");
while (1) {
input = getchar();
input = toupper(input);
if (input == 'T') {
func_values[func_count] = 1;
break;
} else if (input == 'F') {
func_values[func_count] = 0;
break;
}
}
if (isatty(fileno(stdin)) == 0)
putchar(input);
}
fprintf(stdout, "\nThanks!\n");
}
/* Now output the listing */
cur_patch = STAILQ_FIRST(&patches);
for (cur_instr = STAILQ_FIRST(&seq_program);
cur_instr != NULL;
cur_instr = STAILQ_NEXT(cur_instr, links), instrcount++) {
if (check_patch(&cur_patch, instrcount,
&skip_addr, func_values) == 0) {
/* Don't count this instruction as it is in a patch
* that was removed.
*/
continue;
}
while (line < cur_instr->srcline) {
fgets(buf, sizeof(buf), ifile);
fprintf(listfile, " \t%s", buf);
line++;
}
fprintf(listfile, "%04x %02x%02x%02x%02x", instrptr,
#ifdef __LITTLE_ENDIAN
cur_instr->format.bytes[0],
cur_instr->format.bytes[1],
cur_instr->format.bytes[2],
cur_instr->format.bytes[3]);
#else
cur_instr->format.bytes[3],
cur_instr->format.bytes[2],
cur_instr->format.bytes[1],
cur_instr->format.bytes[0]);
#endif
/*
* Macro expansions can cause several instructions
* to be output for a single source line. Only
* advance the line once in these cases.
*/
if (line == cur_instr->srcline) {
fgets(buf, sizeof(buf), ifile);
fprintf(listfile, "\t%s", buf);
line++;
} else {
fprintf(listfile, "\n");
}
instrptr++;
}
/* Dump the remainder of the file */
while(fgets(buf, sizeof(buf), ifile) != NULL)
fprintf(listfile, " %s", buf);
fclose(ifile);
}
static int
check_patch(patch_t **start_patch, int start_instr,
int *skip_addr, int *func_vals)
{
patch_t *cur_patch;
cur_patch = *start_patch;
while (cur_patch != NULL && start_instr == cur_patch->begin) {
if (func_vals[cur_patch->patch_func] == 0) {
int skip;
/* Start rejecting code */
*skip_addr = start_instr + cur_patch->skip_instr;
for (skip = cur_patch->skip_patch;
skip > 0 && cur_patch != NULL;
skip--)
cur_patch = STAILQ_NEXT(cur_patch, links);
} else {
/* Accepted this patch. Advance to the next
* one and wait for our intruction pointer to
* hit this point.
*/
cur_patch = STAILQ_NEXT(cur_patch, links);
}
}
*start_patch = cur_patch;
if (start_instr < *skip_addr)
/* Still skipping */
return (0);
return (1);
}
/*
* Print out error information if appropriate, and clean up before
* terminating the program.
*/
void
stop(const char *string, int err_code)
{
if (string != NULL) {
fprintf(stderr, "%s: ", appname);
if (yyfilename != NULL) {
fprintf(stderr, "Stopped at file %s, line %d - ",
yyfilename, yylineno);
}
fprintf(stderr, "%s\n", string);
}
if (ofile != NULL) {
fclose(ofile);
if (err_code != 0) {
fprintf(stderr, "%s: Removing %s due to error\n",
appname, ofilename);
unlink(ofilename);
}
}
if (regfile != NULL) {
fclose(regfile);
if (err_code != 0) {
fprintf(stderr, "%s: Removing %s due to error\n",
appname, regfilename);
unlink(regfilename);
}
}
if (listfile != NULL) {
fclose(listfile);
if (err_code != 0) {
fprintf(stderr, "%s: Removing %s due to error\n",
appname, listfilename);
unlink(listfilename);
}
}
symlist_free(&patch_functions);
symtable_close();
exit(err_code);
}
struct instruction *
seq_alloc()
{
struct instruction *new_instr;
new_instr = (struct instruction *)malloc(sizeof(struct instruction));
if (new_instr == NULL)
stop("Unable to malloc instruction object", EX_SOFTWARE);
memset(new_instr, 0, sizeof(*new_instr));
STAILQ_INSERT_TAIL(&seq_program, new_instr, links);
new_instr->srcline = yylineno;
return new_instr;
}
critical_section_t *
cs_alloc()
{
critical_section_t *new_cs;
new_cs= (critical_section_t *)malloc(sizeof(critical_section_t));
if (new_cs == NULL)
stop("Unable to malloc critical_section object", EX_SOFTWARE);
memset(new_cs, 0, sizeof(*new_cs));
TAILQ_INSERT_TAIL(&cs_tailq, new_cs, links);
return new_cs;
}
scope_t *
scope_alloc()
{
scope_t *new_scope;
new_scope = (scope_t *)malloc(sizeof(scope_t));
if (new_scope == NULL)
stop("Unable to malloc scope object", EX_SOFTWARE);
memset(new_scope, 0, sizeof(*new_scope));
TAILQ_INIT(&new_scope->inner_scope);
if (SLIST_FIRST(&scope_stack) != NULL) {
TAILQ_INSERT_TAIL(&SLIST_FIRST(&scope_stack)->inner_scope,
new_scope, scope_links);
}
/* This patch is now the current scope */
SLIST_INSERT_HEAD(&scope_stack, new_scope, scope_stack_links);
return new_scope;
}
void
process_scope(scope_t *scope)
{
/*
* We are "leaving" this scope. We should now have
* enough information to process the lists of scopes
* we encapsulate.
*/
scope_t *cur_scope;
u_int skip_patch_count;
u_int skip_instr_count;
cur_scope = TAILQ_LAST(&scope->inner_scope, scope_tailq);
skip_patch_count = 0;
skip_instr_count = 0;
while (cur_scope != NULL) {
u_int patch0_patch_skip;
patch0_patch_skip = 0;
switch (cur_scope->type) {
case SCOPE_IF:
case SCOPE_ELSE_IF:
if (skip_instr_count != 0) {
/* Create a tail patch */
patch0_patch_skip++;
cur_scope->patches[1].skip_patch =
skip_patch_count + 1;
cur_scope->patches[1].skip_instr =
skip_instr_count;
}
/* Count Head patch */
patch0_patch_skip++;
/* Count any patches contained in our inner scope */
patch0_patch_skip += cur_scope->inner_scope_patches;
cur_scope->patches[0].skip_patch = patch0_patch_skip;
cur_scope->patches[0].skip_instr =
cur_scope->end_addr - cur_scope->begin_addr;
skip_instr_count += cur_scope->patches[0].skip_instr;
skip_patch_count += patch0_patch_skip;
if (cur_scope->type == SCOPE_IF) {
scope->inner_scope_patches += skip_patch_count;
skip_patch_count = 0;
skip_instr_count = 0;
}
break;
case SCOPE_ELSE:
/* Count any patches contained in our innter scope */
skip_patch_count += cur_scope->inner_scope_patches;
skip_instr_count += cur_scope->end_addr
- cur_scope->begin_addr;
break;
case SCOPE_ROOT:
stop("Unexpected scope type encountered", EX_SOFTWARE);
/* NOTREACHED */
}
cur_scope = TAILQ_PREV(cur_scope, scope_tailq, scope_links);
}
}